FreeCalypso > hg > fc-tourmaline
view src/cs/riviera/tests/rv/rv_test_exec_def.h @ 273:5caa86ee2cfa
enable L1_NEW_AEC in l1_confg.h (bold change)
The AEC function implemented in DSP ROM 3606 on the Calypso silicon
we work with is the one that corresponds to L1_NEW_AEC; the same holds
for DSP 34 and even for DSP 33 with more recent patch versions.
However, TI shipped their TCS211 reference fw with L1_NEW_AEC set to 0,
thus driving AEC the old way if anyone tried to enable it, either via
AT%Nxxxx or via the audio mode facility. As a result, the fw would
try to control features which no longer exist in the DSP (long vs short
echo and the old echo suppression level bits), while providing no way
to tune the 8 new parameter words added to the DSP's NDB page.
The only sensible solution is to bite the bullet and enable L1_NEW_AEC
in L1 config, with fallout propagating into RiViera Audio Service
T_AUDIO_AEC_CFG structure and into /aud/*.cfg binary file format.
The latter fallout will be addressed in further code changes.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Thu, 29 Jul 2021 18:32:40 +0000 |
| parents | 4e78acac3d88 |
| children |
line wrap: on
line source
/** * @file rv_test_exec_def.h * * LCD and Keypad definitions. * * All the definitions below are used to control LCD and keypad * when being in EXEC mode (tests to execute are chosen at execution * time with the keypad and the LCD). * * @author Cedric Baudelet * @author Vincent Oberle */ /* * History: * * Date Author Modification * ------------------------------------------------------------------- * 03/13/02 Vincent Oberle Put from rv_test.h in its own file. * * (C) Copyright 2002 by Texas Instruments Incorporated, All Rights Reserved */ #ifndef _RV_TEST_EXEC_DEF_H_ #define _RV_TEST_EXEC_DEF_H_ #define TEST_TYPE_STATE (1) #define TEST_LEVEL_STATE (2) #define TEST_NUMBER_STATE (3) #define NB_OF_TEST_TO_PASS_STATE (4) #define TEST_AUDIO_STATE (5) #define TEST_AUDIO_SERVICES_STATE (6) #define LCD_LEN (6) /* RV TEST TEST_TYPE PARAMETER */ #define TEST_TYPE_LCD_LEN (6) static char TEST_TYPE_LCD [TEST_TYPE_LCD_LEN][15] = {" TEST TYPE ", " 1 - REGR ", " 2 - CERTIF ", " 3 - DEMO ", " 4 - MISC ", " 5 - UPF "}; /* RV TEST TEST_AUDIO PARAMETER */ #define TEST_AUDIO_LCD_LEN (3) static char TEST_AUDIO_LCD [TEST_TYPE_LCD_LEN][15] = {" TEST AUDIO ", " 1-LIST ", " 2-ONESHOT "}; /* RV TEST TEST_AUDIO_SERVICES PARAMETER */ #define TEST_AUDIO_SERVICES_LCD_LEN (5) static char TEST_AUDIO_SERVICES_LCD [TEST_TYPE_LCD_LEN][15] = {" AUDIO SERVICE", " 1 - KEYBEEP", " 2 - TONES ", " 3 - MELODY "}; /* RV TEST TEST_MPM_SERVICES PARAMETER */ #define TEST_MPM_LCD_LEN (/*8*/6) static char TEST_MPM_LCD [TEST_MPM_LCD_LEN][15] = { " TEST MPM ", " ", "1- TEST LOOP ", "2- WAIT STATES", "3- PREDEFINED ", " COMMANDS "}; /*, "4- OTHER ", " COMMAND "};*/ #endif /* _RV_TEST_EXEC_DEF_H_ */