FreeCalypso > hg > fc-tourmaline
view src/cs/riviera/tests/rv/rv_test_exec_def.h @ 303:f76436d19a7a default tip
!GPRS config: fix long-standing AT+COPS chance hanging bug
There has been a long-standing bug in FreeCalypso going back years:
sometimes in the AT command bring-up sequence of an ACI-only MS,
the AT+COPS command would produce only a power scan followed by
cessation of protocol stack activity (only L1 ADC traces), instead
of the expected network search sequence. This behaviour was seen
in different FC firmware versions going back to Citrine, and seemed
to follow some law of chance, not reliably repeatable.
This bug has been tracked down and found to be specific to !GPRS
configuration, stemming from our TCS2/TCS3 hybrid and reconstruction
of !GPRS support that was bitrotten in TCS3.2/LoCosto version.
ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3
version and had to be pulled from TCS2 - but as it turns out,
there is a new field in the MMR_REG_REQ primitive that needs to be
set correctly, and that psa_mms.c module is the place where this
initialization needed to be added.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Thu, 08 Jun 2023 08:23:37 +0000 |
| parents | 4e78acac3d88 |
| children |
line wrap: on
line source
/** * @file rv_test_exec_def.h * * LCD and Keypad definitions. * * All the definitions below are used to control LCD and keypad * when being in EXEC mode (tests to execute are chosen at execution * time with the keypad and the LCD). * * @author Cedric Baudelet * @author Vincent Oberle */ /* * History: * * Date Author Modification * ------------------------------------------------------------------- * 03/13/02 Vincent Oberle Put from rv_test.h in its own file. * * (C) Copyright 2002 by Texas Instruments Incorporated, All Rights Reserved */ #ifndef _RV_TEST_EXEC_DEF_H_ #define _RV_TEST_EXEC_DEF_H_ #define TEST_TYPE_STATE (1) #define TEST_LEVEL_STATE (2) #define TEST_NUMBER_STATE (3) #define NB_OF_TEST_TO_PASS_STATE (4) #define TEST_AUDIO_STATE (5) #define TEST_AUDIO_SERVICES_STATE (6) #define LCD_LEN (6) /* RV TEST TEST_TYPE PARAMETER */ #define TEST_TYPE_LCD_LEN (6) static char TEST_TYPE_LCD [TEST_TYPE_LCD_LEN][15] = {" TEST TYPE ", " 1 - REGR ", " 2 - CERTIF ", " 3 - DEMO ", " 4 - MISC ", " 5 - UPF "}; /* RV TEST TEST_AUDIO PARAMETER */ #define TEST_AUDIO_LCD_LEN (3) static char TEST_AUDIO_LCD [TEST_TYPE_LCD_LEN][15] = {" TEST AUDIO ", " 1-LIST ", " 2-ONESHOT "}; /* RV TEST TEST_AUDIO_SERVICES PARAMETER */ #define TEST_AUDIO_SERVICES_LCD_LEN (5) static char TEST_AUDIO_SERVICES_LCD [TEST_TYPE_LCD_LEN][15] = {" AUDIO SERVICE", " 1 - KEYBEEP", " 2 - TONES ", " 3 - MELODY "}; /* RV TEST TEST_MPM_SERVICES PARAMETER */ #define TEST_MPM_LCD_LEN (/*8*/6) static char TEST_MPM_LCD [TEST_MPM_LCD_LEN][15] = { " TEST MPM ", " ", "1- TEST LOOP ", "2- WAIT STATES", "3- PREDEFINED ", " COMMANDS "}; /*, "4- OTHER ", " COMMAND "};*/ #endif /* _RV_TEST_EXEC_DEF_H_ */