FreeCalypso > hg > fc-tourmaline
view src/cs/services/atp/atp_config.h @ 223:740a8e8fc9d7
startup sync logic rework for the new PWON button boot scheme
Previously we added logic to the MMI task to hold off PEI init until
R2D is running, and then extended that condition to wait for FCHG
init too. However, the dependencies of MMI upon R2D and FCHG don't
start until mmiInit(), and that call is driven by Switch_ON() code,
hence the wait for R2D and FCHG init can be made in that code path
instead of the MMI task. Furthermore, with our new way of signaling
PWON button boot to MMI, we need a new wait to ensure that the MMI
task is up - previously this assurance was provided by the wait for
Kp pointers to be set.
Solution: revert our previous PEI init hold-off additions to MMI,
add a new flag indicating MMI task init done, and put the combined
wait for all needed conditions into our new PWON button boot code
in power.c.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Tue, 27 Apr 2021 06:24:52 +0000 |
| parents | 4e78acac3d88 |
| children |
line wrap: on
line source
/******************************************************************************* * * File Name : atp_config.h * * Configuration setting of ATP SW entity * * (C) Texas Instruments, all rights reserved * * Version number : 0.1 Date : 28-Feb-2000 * * History : 0.1 - Created by E. Baissus * * * Author : Eric Baissus : e-baissus@ti.com * * (C) Copyright 2000 by Texas Instruments Incorporated, All Rights Reserved ******************************************************************************/ #ifndef ATP_CONFIG_H #define ATP_CONFIG_H #include "atp/atp_pool_size.h" /* Stack & Memory Bank sizes definitions */ /* Maximum number of SW entity which can register simultaneously register to the ATP SW entity */ #define ATP_MAX_NB_SW_ENTITY 10 // This does not includes GSM SW entity #define ATP_SW_ENTITY_NAME_MAX_CARAC 10 #define ATP_SPP_MAX_PENDING_PORT 10 /* Maximum number of port which can be in open port pending state at the same time Note that a port is considered to be in pending state when in server mode */ #define ATP_HSG_NAME "HSG" /* Sw entity name : used to register to ATP the HSG*/ #define ATP_GSM_NAME "GSM" /* Sw entity name of the GSM-PS used to register to the ATP */ #define ATP_SPP_NAME "SPP" /* Sw entity name : used to register to ATP the SPP */ #define ATP_HS_NAME "HS" /* Sw entity name : used to register to ATP the HS */ #define ATP_AAA_NAME "AAA" /* Sw entity name of the GSM-PS used to register to the ATP */ #define ATP_DEFAULT_GSM_MAX_PACKET_SIZE (1500) // Default value indicating the maximum size that is supported // when GSM sends a packet to ATP #define ATP_MAX_NB_OF_PORT_SUPPORTED_BY_GSM (3) #define ATP_MAX_CMD_LENGTH (0xFF) // Maximum length of a command handled by ATP /* Configuration parameters for environment */ #define ATP_MB_PRIM_SIZE ATP_MB1_SIZE #define ATP_MB_PRIM_WATERMARK (ATP_MB_PRIM_SIZE - 1000) /* ** This def is in rvm_priorities.h ** #define ATP_SWE_LEVEL (4); // SHOULD BE DEFINED IN RVM_PRIORITIES.H !!! */ #endif