view src/cs/riviera/tests/rv/rv_test_exec_def.h @ 274:fa22012c4a39

CST: remove AT%Nxxxx old AEC control This crude method of enabling and configuring AEC is not compatible with L1_NEW_AEC, and even for the old AEC it did not support every possible combination. It is time for this hack to go. The new and proper way of enabling and configuring AEC is via RiViera Audio Service audio mode facility, either audio mode files or full access write, most directly accessible via fc-tmsh auw 12 for free experimentation.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 29 Jul 2021 18:57:36 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/**
 * @file	rv_test_exec_def.h
 *
 * LCD and Keypad definitions.
 *
 * All the definitions below are used to control LCD and keypad
 * when being in EXEC mode (tests to execute are chosen at execution
 * time with the keypad and the LCD).
 *
 * @author	Cedric Baudelet
 * @author	Vincent Oberle
 */

/*
 * History:
 *
 *	Date       	Author					Modification
 *	-------------------------------------------------------------------
 *	03/13/02	Vincent Oberle			Put from rv_test.h in its own file.
 *
 * (C) Copyright 2002 by Texas Instruments Incorporated, All Rights Reserved
 */

#ifndef _RV_TEST_EXEC_DEF_H_
#define _RV_TEST_EXEC_DEF_H_


#define TEST_TYPE_STATE				(1)
#define TEST_LEVEL_STATE			(2)
#define TEST_NUMBER_STATE			(3)
#define NB_OF_TEST_TO_PASS_STATE	(4)
#define TEST_AUDIO_STATE			(5)
#define TEST_AUDIO_SERVICES_STATE	(6)

#define LCD_LEN (6)

/* RV TEST TEST_TYPE PARAMETER */
#define TEST_TYPE_LCD_LEN (6)
static char TEST_TYPE_LCD [TEST_TYPE_LCD_LEN][15] = {"  TEST TYPE   ",
													 "  1 - REGR    ",
													 "  2 - CERTIF  ",
													 "  3 - DEMO    ",
													 "  4 - MISC    ",
													 "  5 - UPF     "};

/* RV TEST TEST_AUDIO PARAMETER */
#define TEST_AUDIO_LCD_LEN (3)
static char TEST_AUDIO_LCD [TEST_TYPE_LCD_LEN][15] = {"  TEST AUDIO ",
													  "  1-LIST    ",
													  "  2-ONESHOT  "};
/* RV TEST TEST_AUDIO_SERVICES PARAMETER */
#define TEST_AUDIO_SERVICES_LCD_LEN (5)
static char TEST_AUDIO_SERVICES_LCD [TEST_TYPE_LCD_LEN][15] = {" AUDIO SERVICE",
															   " 1 - KEYBEEP",
															   " 2 - TONES  ",
															   " 3 - MELODY "};

/* RV TEST TEST_MPM_SERVICES PARAMETER */
#define TEST_MPM_LCD_LEN (/*8*/6)
static char TEST_MPM_LCD [TEST_MPM_LCD_LEN][15] = {  "   TEST MPM   ",
					    						     "              ",
													 "1- TEST LOOP  ",
													 "2- WAIT STATES",
													 "3- PREDEFINED ",
													 "   COMMANDS   "}; /*,
													 "4- OTHER      ",
													 "   COMMAND    "};*/



#endif /* _RV_TEST_EXEC_DEF_H_ */