FreeCalypso > hg > fc-tourmaline

view components/frame_ir @ 303:f76436d19a7a default tip

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
!GPRS config: fix long-standing AT+COPS chance hanging bug There has been a long-standing bug in FreeCalypso going back years: sometimes in the AT command bring-up sequence of an ACI-only MS, the AT+COPS command would produce only a power scan followed by cessation of protocol stack activity (only L1 ADC traces), instead of the expected network search sequence. This behaviour was seen in different FC firmware versions going back to Citrine, and seemed to follow some law of chance, not reliably repeatable. This bug has been tracked down and found to be specific to !GPRS configuration, stemming from our TCS2/TCS3 hybrid and reconstruction of !GPRS support that was bitrotten in TCS3.2/LoCosto version. ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3 version and had to be pulled from TCS2 - but as it turns out, there is a new field in the MMR_REG_REQ primitive that needs to be set correctly, and that psa_mms.c module is the place where this initialization needed to be added.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 08 Jun 2023 08:23:37 +0000
parents e58a5bb12de4
children
line wrap: on
line source

# Building frame_ir.lib using a mixture of source and blobs as configured

CFLAGS="-mw -x -pw2 -o3 -me -mt -g -mn"

# Defines

CPPFLAGS="-DNU_DEBUG -D_FF_RV_EXIST_ -DRUN_INT_RAM"
CPPFLAGS="$CPPFLAGS -D_TARGET_ -D_NUCLEUS_"

if [ "$MEMSUPER" != 0 ]
then
	CPPFLAGS="$CPPFLAGS -DMEMORY_SUPERVISION"
fi
if [ "$MEMSUPER" = 2 ]
then
	CPPFLAGS="$CPPFLAGS -DOPTIMIZE_POOL"
fi

# Includes

CPPFLAGS="$CPPFLAGS -I$SRC/gpf/frame"
CPPFLAGS="$CPPFLAGS -I$SRC/gpf/inc/nuc"
CPPFLAGS="$CPPFLAGS -I$SRC/nucleus"
CPPFLAGS="$CPPFLAGS -I$SRC/gpf/inc"
CPPFLAGS="$CPPFLAGS -I$SRC/gpf/tst"

# Source modules

SRCDIR=$SRC/gpf/frame

cfile_symlink $SRCDIR/frame.c
cfile_symlink $SRCDIR/vsi_sem.c
cfile_symlink $SRCDIR/vsi_com.c
cfile_symlink $SRCDIR/vsi_mem.c
cfile_symlink $SRCDIR/vsi_tim.c
cfile_symlink $SRCDIR/vsi_mis.c
cfile_symlink $SRCDIR/vsi_drv.c
cfile_symlink $SRCDIR/vsi_trc.c
cfile_symlink $SRCDIR/vsi_pro.c
if [ "$MEMSUPER" != 0 ]
then
	cfile_symlink $SRCDIR/vsi_ppm.c
fi
cfile_symlink $SRCDIR/xalert.c
cfile_symlink $SRCDIR/route.c
cfile_symlink $SRCDIR/prf_func.c
cfile_symlink $SRCDIR/frm_ext.c
cfile_symlink $SRCDIR/frame_version.c

# OSL

if [ "$OSL" = 1 ]
then

	# drop -o3
	CFLAGS="-mw -x -pw2 -o -me -mt -g -mn"

	SRCDIR=$SRC/gpf/osl

	cfile_plain $SRCDIR/os_com_ir.c
	cfile_plain $SRCDIR/os_mem_ir.c
	cfile_plain $SRCDIR/os_mis_ir.c
	cfile_plain $SRCDIR/os_pro_ir.c
	cfile_plain $SRCDIR/os_sem_ir.c
	cfile_plain $SRCDIR/os_tim_ir.c

else

	OBJDIR=../../blobs/osl/ir
	OBJDIR_PS=../../blobs/osl/ir_ps

	OBJS="$OBJS $OBJDIR/os_com.obj"
	OBJS="$OBJS $OBJDIR/os_drv.obj"
	OBJS="$OBJS $OBJDIR/os_evt.obj"
	OBJS="$OBJS $OBJDIR/os_isr.obj"
	if [ "$MEMSUPER" != 0 ]
	then
		OBJS="$OBJS $OBJDIR_PS/os_mem.obj"
	else
		OBJS="$OBJS $OBJDIR/os_mem.obj"
	fi
	OBJS="$OBJS $OBJDIR/os_mis.obj"
	OBJS="$OBJS $OBJDIR/os_pro.obj"
	OBJS="$OBJS $OBJDIR/os_sem.obj"
	OBJS="$OBJS $OBJDIR/os_tim.obj"

fi