FreeCalypso > hg > fc-tourmaline
view src/cs/drivers/drv_app/kpd/kpd_power_api.h @ 303:f76436d19a7a default tip
!GPRS config: fix long-standing AT+COPS chance hanging bug
There has been a long-standing bug in FreeCalypso going back years:
sometimes in the AT command bring-up sequence of an ACI-only MS,
the AT+COPS command would produce only a power scan followed by
cessation of protocol stack activity (only L1 ADC traces), instead
of the expected network search sequence. This behaviour was seen
in different FC firmware versions going back to Citrine, and seemed
to follow some law of chance, not reliably repeatable.
This bug has been tracked down and found to be specific to !GPRS
configuration, stemming from our TCS2/TCS3 hybrid and reconstruction
of !GPRS support that was bitrotten in TCS3.2/LoCosto version.
ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3
version and had to be pulled from TCS2 - but as it turns out,
there is a new field in the MMR_REG_REQ primitive that needs to be
set correctly, and that psa_mms.c module is the place where this
initialization needed to be added.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 08 Jun 2023 08:23:37 +0000 |
parents | 4e78acac3d88 |
children |
line wrap: on
line source
/** * @file kpd_power_api.h * * API Definition for keypad driver, used bi PWR SWE. * * * @author Laurent Sollier (l-sollier@ti.com) * @version 0.1 */ /* * History: * * Date Author Modification * ---------------------------------------- * 11/02/2001 L Sollier Create * * * (C) Copyright 2001 by Texas Instruments Incorporated, All Rights Reserved */ #ifndef _KPD_POWER_API_H_ #define _KPD_POWER_API_H_ #include "kpd/kpd_cfg.h" #include "kpd/kpd_api.h" #include "rv/rv_general.h" #include "rvf/rvf_api.h" /* This structure defines the two functions to call when PWR key is pressed */ typedef struct { void (*pressed)(T_KPD_VIRTUAL_KEY_ID); void (*released)(void); } T_KPD_KEYPAD; #ifdef __cplusplus extern "C" { #endif /** * @name API functions * * API functions declarations. */ /*@{*/ /** * function: kpd_power_key_pressed * * This function is called by the PWR SWE when the PWR key is pressed. * * @return * - RV_OK if operation is successfull, * - RV_MEMORY_ERR if message could not be sent to the keypad task. * - RV_INTERNAL_ERR if keypad driver is not yet initialized. * */ T_RV_RET kpd_power_key_pressed(void); #ifdef __cplusplus } #endif #endif /* #ifndef _KPD_POWER_API_H_ */