view src/cs/drivers/drv_core/inth/inth.h @ 303:f76436d19a7a default tip

!GPRS config: fix long-standing AT+COPS chance hanging bug There has been a long-standing bug in FreeCalypso going back years: sometimes in the AT command bring-up sequence of an ACI-only MS, the AT+COPS command would produce only a power scan followed by cessation of protocol stack activity (only L1 ADC traces), instead of the expected network search sequence. This behaviour was seen in different FC firmware versions going back to Citrine, and seemed to follow some law of chance, not reliably repeatable. This bug has been tracked down and found to be specific to !GPRS configuration, stemming from our TCS2/TCS3 hybrid and reconstruction of !GPRS support that was bitrotten in TCS3.2/LoCosto version. ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3 version and had to be pulled from TCS2 - but as it turns out, there is a new field in the MMR_REG_REQ primitive that needs to be set correctly, and that psa_mms.c module is the place where this initialization needed to be added.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 08 Jun 2023 08:23:37 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/*******************************************************************************
            TEXAS INSTRUMENTS INCORPORATED PROPRIETARY INFORMATION           
                                                                             
   Property of Texas Instruments -- For  Unrestricted  Internal  Use  Only 
   Unauthorized reproduction and/or distribution is strictly prohibited.  This 
   product  is  protected  under  copyright  law  and  trade  secret law as an 
   unpublished work.  Created 1987, (C) Copyright 1997 Texas Instruments.  All 
   rights reserved.                                                            
                  
                                                           
   Filename       	: inth.h

   Description    	: Header file for the INTH module

   Project        	: drivers

   Author         	: pmonteil@tif.ti.com  Patrice Monteil.

   Version number   : 1.17

   Date             : 09/02/03

   Previous delta 	: 01/22/01 10:32:33

   SCCS file      	: /db/gsm_asp/db_ht96/dsp_0/gsw/rel_0/mcu_l1/release_gprs/RELEASE_GPRS/drivers1/common/SCCS/s.inth.h

   Sccs Id  (SID)       : '@(#) inth.h 1.10 01/30/01 10:22:23 '

 
*****************************************************************************/

#include "l1sw.cfg"
#include "chipset.cfg"

#if (CHIPSET != 12)

#if (OP_L1_STANDALONE == 0)
  #include "main/sys_types.h"
#else
  #include "sys_types.h"
#endif

/* Adress of the registers */

#if ((CHIPSET == 4) || (CHIPSET == 5) || (CHIPSET == 6) || (CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 9)|| (CHIPSET == 10) || (CHIPSET == 11))
  #define INTH_IT_REG1    MEM_INTH_ADDR 		  /* INTH IT register 1 */
  #define INTH_IT_REG2    (MEM_INTH_ADDR + 0x02)  /* INTH IT register 2 */
  #define INTH_MASK_REG1  (MEM_INTH_ADDR + 0x08)  /* INTH mask register 1 */
  #define INTH_MASK_REG2  (MEM_INTH_ADDR + 0x0a)  /* INTH mask register 2 */
  #define INTH_B_IRQ_REG  (MEM_INTH_ADDR + 0x10)  /* INTH source binary IRQ reg. */
  #define INTH_B_FIQ_REG  (MEM_INTH_ADDR + 0x12)  /* INTH source binary FIQ reg. */
  #define INTH_CTRL_REG   (MEM_INTH_ADDR + 0x14)  /* INTH control register */
  #define INTH_EXT_REG    (MEM_INTH_ADDR + 0x20)  /* INTH 1st external int. reg. */
#else
  #define INTH_IT_REG  	  MEM_INTH_ADDR 		  /* INTH IT register */
  #define INTH_MASK_REG   (MEM_INTH_ADDR + 0x02)  /* INTH mask register */
  #define INTH_S_IRQ_REG  (MEM_INTH_ADDR + 0x04)  /* INTH source IRQ register */
  #define INTH_S_FIQ_REG  (MEM_INTH_ADDR + 0x06)  /* INTH source FIQ register */
  #define INTH_B_IRQ_REG  (MEM_INTH_ADDR + 0x08)  /* INTH source binary IRQ reg. */
  #define INTH_B_FIQ_REG  (MEM_INTH_ADDR + 0x0a)  /* INTH source binary FIQ reg. */
  #define INTH_CTRL_REG   (MEM_INTH_ADDR + 0x0c)  /* INTH control register */
  #define INTH_EXT_REG    (MEM_INTH_ADDR + 0x0e)  /* INTH 1st external int. reg. */
#endif

/* Interrupts number */

#define INTH_TIMER	0			/* number of the TIMER int. */
#define INTH_AIRQ_FIRST	1			/* first external int. number */
#define INTH_AIRQ_LAST	13			/* last external int. number */
#define INTH_DMA	14			/* number of the DMA int. */
#define INTH_LEAD	15			/* number of the LEAD int. */

/* Bit definition of INTH interrupt level registers */

#define INTH_FIQ_NIRQ	0x0001
#if ((CHIPSET == 4) || (CHIPSET == 5) || (CHIPSET == 6) || (CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 9) || (CHIPSET == 10) || (CHIPSET == 11))
  #define INTH_PRIORITY	  0x007c
  #define INTH_EDGE_NLVL  0x0002
#else
  #define INTH_PRIORITY	0x001e
  #define INTH_EDGE_NLVL	0x0020
#endif


/* Bit definition of INTH source binary registers */

#if ((CHIPSET == 4) || (CHIPSET == 5) || (CHIPSET == 6) || (CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 9) || (CHIPSET == 10) || (CHIPSET == 11))
  #define INTH_SRC_NUM	0x001f
#else
  #define INTH_SRC_NUM	0x000f
#endif


/* Bit definition of INTH Control Register */

#define INTH_NEW_IRQ_AGR	0x0001
#define INTH_NEW_FIQ_AGR	0x0002

/* Other useful constants */

#define INTH_IRQ 0
#define INTH_FIQ 1
#define INTH_LEVEL 0
#define INTH_EDGE 1

/*
 * Macros
 */

#define INT_MASK(interrupt) (1 << (interrupt - 1))
#define PENDING_INT(pendingITs, interrupt) (pendingITs & INT_MASK(interrupt))

/*--------------------------------------------------------------*/
/*  INTH_ENABLEONEIT()						*/
/*--------------------------------------------------------------*/
/* Parameters : num of the IT to enable				*/
/* Return     :	none						*/
/* Functionality : Unmask one it				*/
/*--------------------------------------------------------------*/
#if ((CHIPSET == 4) || (CHIPSET == 5) || (CHIPSET == 6) || (CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 9) || (CHIPSET == 10) || (CHIPSET == 11))
  #define INTH_ENABLEONEIT(it)( \
    (it < 16) ? (* (volatile unsigned short *) INTH_MASK_REG1 &= ~(1 << it)) : \
                (* (volatile unsigned short *) INTH_MASK_REG2 &= ~(1 << (it-16))) \
  )
#else
  #define INTH_ENABLEONEIT(it)(* (volatile unsigned short *) INTH_MASK_REG &= ~(1 << it))
#endif

/*--------------------------------------------------------------*/
/*  INTH_DISABLEONEIT()						*/
/*--------------------------------------------------------------*/
/* Parameters : num of the IT to disable			*/
/* Return     :	none						*/
/* Functionality : mask one it					*/
/*--------------------------------------------------------------*/
#if ((CHIPSET == 4) || (CHIPSET == 5) || (CHIPSET == 6) || (CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 9) || (CHIPSET == 10) || (CHIPSET == 11))
  #define INTH_DISABLEONEIT(it)( \
    (it < 16) ? (* (volatile unsigned short *) INTH_MASK_REG1 |= (1 << it)) : \
                (* (volatile unsigned short *) INTH_MASK_REG2 |= (1 << (it-16))) \
  )
#else
  #define INTH_DISABLEONEIT(it)(* (volatile unsigned short *) INTH_MASK_REG |= (1 << it))
#endif

/*--------------------------------------------------------------*/
/*  INTH_ENABLEALLIT()						*/
/*--------------------------------------------------------------*/
/* Parameters : none						*/
/* Return     :	none						*/
/* Functionality : Enable all it				*/
/*--------------------------------------------------------------*/

#if ((CHIPSET == 4) || (CHIPSET == 5) || (CHIPSET == 6) || (CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 9) || (CHIPSET == 10) || (CHIPSET == 11))
  #define INTH_ENABLEALLIT { \
    * (volatile unsigned short *) INTH_MASK_REG1 = 0x0000; \
    * (volatile unsigned short *) INTH_MASK_REG2 = 0x0000; \
  }
#else
  #define INTH_ENABLEALLIT ( * (volatile unsigned short *) INTH_MASK_REG = 0x0000)
#endif

/*--------------------------------------------------------------*/
/*  INTH_DISABLEALLIT()						*/
/*--------------------------------------------------------------*/
/* Parameters : none						*/
/* Return     :	none						*/
/* Functionality :mask all it					*/
/*--------------------------------------------------------------*/

#if (CHIPSET == 4)
  #define INTH_DISABLEALLIT { \
  * (volatile unsigned short *) INTH_MASK_REG1 = 0xffff; \
  * (volatile unsigned short *) INTH_MASK_REG2 = 0x000f; \
  }
#elif ((CHIPSET == 5) || (CHIPSET == 6) || (CHIPSET == 9))
  #define INTH_DISABLEALLIT { \
  * (volatile unsigned short *) INTH_MASK_REG1 = 0xffff; \
  * (volatile unsigned short *) INTH_MASK_REG2 = 0x01ff; \
  }
#elif (CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 10) || (CHIPSET == 11)
  #define INTH_DISABLEALLIT { \
  * (volatile unsigned short *) INTH_MASK_REG1 = 0xffff; \
  * (volatile unsigned short *) INTH_MASK_REG2 = 0xffff; \
  }
#else
  #define INTH_DISABLEALLIT (* (volatile unsigned short *) INTH_MASK_REG = 0xffff)
#endif


/*--------------------------------------------------------------*/
/*  INTH_CLEAR()						*/
/*--------------------------------------------------------------*/
/* Parameters : value to write                		        */
/* Return     :	none						*/
/* Functionality :valid next it					*/
/*--------------------------------------------------------------*/


#define INTH_CLEAR (* (volatile SYS_UWORD16 *) INTH_CTRL_REG = 0x0003)


/*--------------------------------------------------------------*/
/*  INTH_VALIDNEXT()						*/
/*--------------------------------------------------------------*/
/* Parameters : num of the processed it				*/
/* Return     :	none						*/
/* Functionality :valid next it					*/
/*--------------------------------------------------------------*/

#define INTH_VALIDNEXT (intARM)( * (volatile SYS_UWORD16 *) INTH_CTRL_REG |= (1 << intARM))

#if ((CHIPSET == 4) || (CHIPSET == 5) || (CHIPSET == 6) || (CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 9) || (CHIPSET == 10) || (CHIPSET == 11))
  /*--------------------------------------------------------------*/
  /*  INTH_RESETALLIT()                                           */
  /*--------------------------------------------------------------*/
  /* Parameters :  None                                            */
  /* Return     :  None                                           */
  /* Functionality :Reset the inth it register                    */
  /*--------------------------------------------------------------*/

  #define INTH_RESETALLIT { \
   * (volatile unsigned short *) INTH_IT_REG1 &= 0x0000; \
   * (volatile unsigned short *) INTH_IT_REG2 &= 0x0000; \
  }  
#endif


#if ((CHIPSET == 4) || (CHIPSET == 5) || (CHIPSET == 6) || (CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 9) || (CHIPSET == 10) || (CHIPSET == 11))
  /*-------------------------------------------------------------*/
  /*   INTH_RESETONEIT()                                         */
  /*-------------------------------------------------------------*/
  /* Parameters : Num of the IT to reset                         */
  /* Return     : None                                           */
  /* Functionality : Reset one IT of the inth IT register        */
  /*-------------------------------------------------------------*/    
  #define INTH_RESETONEIT(it) ( \
    (it<16) ? (* (volatile unsigned short *) INTH_IT_REG1 &= ~(1 << it)) : \
              (* (volatile unsigned short *) INTH_IT_REG2 &= ~(1 << (it-16))) \
			       )
#else  // CHIPSET == 2,3
  #define INTH_RESETONEIT(it) (* (volatile unsigned short *) INTH_IT_REG &= ~(1 << it))
#endif // CHIPSET

/* Prototypes */

#if ((CHIPSET == 4) || (CHIPSET == 5) || (CHIPSET == 6) || (CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 9) || (CHIPSET == 10) || (CHIPSET == 11))
  unsigned long INTH_GetPending (void);
  unsigned long INTH_ResetIT (void);
#else
  unsigned short INTH_GetPending (void);
  unsigned short INTH_ResetIT (void);
#endif

unsigned short INTH_Ack (int);
void INTH_InitLevel (int, int, int, int);


#endif /* endif chipset != 12 */