FreeCalypso > hg > fc-tourmaline
view src/cs/drivers/drv_core/timer/timer2.h @ 303:f76436d19a7a default tip
!GPRS config: fix long-standing AT+COPS chance hanging bug
There has been a long-standing bug in FreeCalypso going back years:
sometimes in the AT command bring-up sequence of an ACI-only MS,
the AT+COPS command would produce only a power scan followed by
cessation of protocol stack activity (only L1 ADC traces), instead
of the expected network search sequence. This behaviour was seen
in different FC firmware versions going back to Citrine, and seemed
to follow some law of chance, not reliably repeatable.
This bug has been tracked down and found to be specific to !GPRS
configuration, stemming from our TCS2/TCS3 hybrid and reconstruction
of !GPRS support that was bitrotten in TCS3.2/LoCosto version.
ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3
version and had to be pulled from TCS2 - but as it turns out,
there is a new field in the MMR_REG_REQ primitive that needs to be
set correctly, and that psa_mms.c module is the place where this
initialization needed to be added.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Thu, 08 Jun 2023 08:23:37 +0000 |
| parents | 4e78acac3d88 |
| children |
line wrap: on
line source
/******************************************************************************* TEXAS INSTRUMENTS INCORPORATED PROPRIETARY INFORMATION Property of Texas Instruments -- For Unrestricted Internal Use Only Unauthorized reproduction and/or distribution is strictly prohibited. This product is protected under copyright law and trade secret law as an unpublished work. Created 1987, (C) Copyright 1997 Texas Instruments. All rights reserved. Filename : timer2.h Description :TIMER1 Project : drivers Author : pmonteil@tif.ti.com Patrice Monteil. Version number : 1.4 Date and time : 02/15/01 15:47:05 Previous delta : 02/15/01 15:47:05 SCCS file : /db/gsm_asp/db_ht96/dsp_0/gsw/rel_0/mcu_l1/release_gprs/mod/emu_p/EMU_P_FRED/drivers1/common/SCCS/s.timer2.h Sccs Id (SID) : '@(#) timer2.h 1.4 02/15/01 15:47:05 ' *****************************************************************************/ #include "l1sw.cfg" #if (OP_L1_STANDALONE == 0) #include "main/sys_types.h" #else #include "sys_types.h" #endif /**** DIONE TIMERs configuration register ****/ #define D_TIMER_ADDR 0xfffe6800 #define D_TIMER_CNTL_MASK 0x001f #define CNTL_D_TIMER_OFFSET 0x0000 #define LOAD_D_TIMER_OFFSET 0x0002 #define READ_D_TIMER_OFFSET 0x0004 #define D_TIMER_CNTL (D_TIMER_ADDR+CNTL_D_TIMER_OFFSET) #define D_TIMER_LOAD (D_TIMER_ADDR+LOAD_D_TIMER_OFFSET) #define D_TIMER_READ (D_TIMER_ADDR+READ_D_TIMER_OFFSET) #define D_TIMER_ST 0x0001 /* bit 0 */ #define D_TIMER_AR 0x0002 /* bit 1 */ #define D_TIMER_PTV 0x001c /* bits 4:2 */ #define D_TIMER_CLK_EN 0x0020 /* bit 5 */ #define D_TIMER_RUN 0x0021 /* bit 5 ,0 */ #define LOAD_TIM 0xffff /* bits 15:0 */ /* ----- Prototypes ----- */ SYS_UWORD16 Dtimer2_Get_cntlreg(void); void Dtimer2_AR(SYS_UWORD16 Ar); void Dtimer2_PTV(SYS_UWORD16 Ptv); void Dtimer2_Clken(SYS_UWORD16 En); void Dtimer2_Start (SYS_UWORD16 startStop); void Dtimer2_Init_cntl (SYS_UWORD16 St, SYS_UWORD16 Reload, SYS_UWORD16 clockScale, SYS_UWORD16 clkon); void Dtimer2_WriteValue (SYS_UWORD16 value); SYS_UWORD16 Dtimer2_ReadValue (void);