FreeCalypso > hg > fc-tourmaline
view src/cs/layer1/audio_cfile/l1audio_abb.c @ 303:f76436d19a7a default tip
!GPRS config: fix long-standing AT+COPS chance hanging bug
There has been a long-standing bug in FreeCalypso going back years:
sometimes in the AT command bring-up sequence of an ACI-only MS,
the AT+COPS command would produce only a power scan followed by
cessation of protocol stack activity (only L1 ADC traces), instead
of the expected network search sequence. This behaviour was seen
in different FC firmware versions going back to Citrine, and seemed
to follow some law of chance, not reliably repeatable.
This bug has been tracked down and found to be specific to !GPRS
configuration, stemming from our TCS2/TCS3 hybrid and reconstruction
of !GPRS support that was bitrotten in TCS3.2/LoCosto version.
ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3
version and had to be pulled from TCS2 - but as it turns out,
there is a new field in the MMR_REG_REQ primitive that needs to be
set correctly, and that psa_mms.c module is the place where this
initialization needed to be added.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Thu, 08 Jun 2023 08:23:37 +0000 |
| parents | 4e78acac3d88 |
| children |
line wrap: on
line source
/* * l1audio_abb.c * * Control audio * * Filename l1audio_abb.c * Copyright 2003 (C) Texas Instruments * * Reference : S820, GACS001 (OMEGA) spec * */ #include "l1_macro.h" #include "l1_confg.h" #if (CODE_VERSION == NOT_SIMULATION) #if (defined _WINDOWS && (OP_RIV_AUDIO == 1)) #include "rv_general.h" #endif #if (CODE_VERSION == SIMULATION) #include <string.h> #include "l1_types.h" #include "sys_types.h" #include "l1_const.h" #include "l1_time.h" #if TESTMODE #include "l1tm_defty.h" #endif #if (AUDIO_TASK == 1) #include "l1audio_const.h" #include "l1audio_cust.h" #include "l1audio_defty.h" #endif #if (L1_GTT == 1) #include "l1gtt_const.h" #include "l1gtt_defty.h" #endif #if (L1_DYN_DSP_DWNLD == 1) #include "l1_dyn_dwl_const.h" #include "l1_dyn_dwl_defty.h" #endif #if (L1_MP3 == 1) #include "l1mp3_defty.h" #endif #if (L1_MIDI == 1) #include "l1midi_defty.h" #endif #if (L1_AAC == 1) #include "l1aac_defty.h" #endif #include "l1_defty.h" #include "l1_varex.h" #include "cust_os.h" #include "l1_msgty.h" #include <stdio.h> #include "sim_cfg.h" #include "sim_cons.h" #include "sim_def.h" #include "sim_var.h" #else #include <string.h> #if (defined _WINDOWS && (OP_RIV_AUDIO == 1)) #define BOOL_FLAG #endif // Triton Audio ON/OFF Changes #include "l1_types.h" #include "sys_types.h" #include "l1_const.h" #include "l1_time.h" #if TESTMODE #include "l1tm_defty.h" #endif #if (AUDIO_TASK == 1) #include "l1audio_const.h" #include "l1audio_cust.h" #include "l1audio_defty.h" #endif #if (L1_GTT == 1) #include "l1gtt_const.h" #include "l1gtt_defty.h" #endif #if (L1_DYN_DSP_DWNLD == 1) #include "l1_dyn_dwl_const.h" #include "l1_dyn_dwl_defty.h" #endif #if (L1_MP3 == 1) #include "l1mp3_defty.h" #endif #if (L1_MIDI == 1) #include "l1midi_defty.h" #endif #if (L1_AAC == 1) #include "l1aac_defty.h" #endif #if (RF_FAM == 61) #include "l1_rf61.h" #endif #include "l1_defty.h" #include "l1_varex.h" #include "l1_msgty.h" #if (OP_RIV_AUDIO == 0) #include "cust_os.h" #include "tpudrv.h" #endif #endif #include "abb.h" #include "l1audio_abb.h" #if (ANLG_FAM == 11) #include "types.h" #include "bspTwl3029_I2c.h" #include "bspTwl3029_Aud_Map.h" #include "bspTwl3029_Audio.h" #endif #if (CODE_VERSION == NOT_SIMULATION)&&(L1_AUDIO_MCU_ONOFF == 1)&&(CHIPSET == 15) void l1_audio_on_off_callback_fn(Uint8 callback_val); #endif #include "l1audio_abb.h" #if ((CODE_VERSION == NOT_SIMULATION)&&(L1_AUDIO_MCU_ONOFF == 1)&&(OP_L1_STANDALONE == 1)&&(CHIPSET == 12)) #include "nucleus.h" #endif #if (ANLG_FAM != 11) extern T_L1S_DSP_COM l1s_dsp_com; extern void l1_audio_lim_partial_update(); #define MAX_PGA_UL 24 #define MAX_PGA_DL 12 #define MAX_VOL_DL 249 static UWORD8 ABB_CurrentVolume = 0; // Uplink PGA gain is coded on 5 bits, corresponding to -12 dB to +12 dB in 1dB steps const UWORD8 ABB_uplink_PGA_gain[] = { 0x10, 0x17, 0x18, 0x19, 0x1A, 0x1B, 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16 }; // Downlink volume: mute, -24dB to 0dB in 6dB steps const UWORD8 ABB_volume_control_gain[] = { 0x05, 0x03, 0x04, 0x00, 0x06, 0x02 }; /* * FreeCalypso: ABB_Read_DLGain() functions and the ABB_DL_volume_read_gain * and ABB_DL_PGA_read_gain constant tables it uses are new in the LoCosto * version of this module (even though the code seems to support classic * ABBs, not LoCosto/Triton) and do not appear in our TCS211 binary object. */ #define INCLUDE_ABB_READ_DLGAIN 0 #if INCLUDE_ABB_READ_DLGAIN // Downlink volume gain read in unsigned Q15 (in VBDCTRL) const WORD16 ABB_DL_volume_read_gain[] = { 0x2000 , // 0: -12 dB 0 , // 1: Mute 0x8000 , // 2: 0 dB 0x0800 , // 3: -24 dB 0x1000 , // 4: -18 dB 0 , // 5: Mute 0x4000 , // 6: -6 dB 0 , // 7: Mute }; // Downlink PGA gain read in unsigned Q15 (in VBDCTRL) const WORD16 ABB_DL_PGA_read_gain[] = { 0x4026 , // 0: - 6 dB 0x47FA , // 1: - 5 dB 0x50C3 , // 2: - 4 dB 0x5A9D , // 3: - 3 dB 0x65AC , // 4: - 2 dB 0x7214 , // 5: - 1 dB 0x8000 , // 6: 0 dB 0x8F9E , // 7: 1 dB 0xA124 , // 8: 2 dB 0xB4CE , // 9: 3 dB 0xCADD , // 10: 4 dB 0xE39E , // 11: 5 dB 0xFF64 , // 12: 6 dB 0x4026 , // 13: - 6 dB 0x4026 , // 14: - 6 dB 0x4026 , // 15: - 6 dB }; #endif /* INCLUDE_ABB_READ_DLGAIN */ // Downlink PGA gain is coded on 4 bits, corresponding to -6dB to 6dB in 1dB steps const UWORD8 ABB_downlink_PGA_gain[] = { 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0A, 0x0B, 0x0C }; // Side tone level: mute, -23dB to +4dB in 3dB steps const UWORD8 ABB_sidetone_gain[] = { 0x08, 0x0D, 0x0C, 0x06, 0x02, 0x07, 0x03, 0x00, 0x04, 0x01, 0x05 }; /* * ABB_Audio_Config * * Configuration of VBCTRL1 register * */ void ABB_Audio_Config (UWORD16 data) { #if (ANLG_FAM == 1) l1s_dsp_com.dsp_ndb_ptr->d_vbctrl = ABB_L1_WRITE (VBCTRL, data); #elif ((ANLG_FAM == 2) || (ANLG_FAM == 3) ) l1s_dsp_com.dsp_ndb_ptr->d_vbctrl1 = ABB_L1_WRITE (VBCTRL1, data); #endif } /* * ABB_Audio_Config_2 * * Configuration of VBCTRL2 register * */ void ABB_Audio_Config_2 (UWORD16 data) { #if ((ANLG_FAM == 2) || (ANLG_FAM == 3)) l1s_dsp_com.dsp_ndb_ptr->d_vbctrl2 = ABB_L1_WRITE (VBCTRL2, data); #endif } /* * ABB_Audio_Control * * Configuration of VAUDCTRL register * */ void ABB_Audio_Control (UWORD16 data) { #if (ANLG_FAM == 3) l1s_dsp_com.dsp_ndb_ptr->d_vaud_cfg = ABB_L1_WRITE (VAUDCTRL, data); #endif } /* * ABB_Audio_On_Off * * Configuration of VAUOCTRL register * */ void ABB_Audio_On_Off (UWORD16 data) { #if (ANLG_FAM == 3) l1s_dsp_com.dsp_ndb_ptr->d_vauo_onoff = ABB_L1_WRITE (VAUOCTRL, data); #endif } /* * ABB_Audio_Volume * * Configuration of VAUSCTRL register * */ void ABB_Audio_Volume (UWORD16 data) { #if (ANLG_FAM == 3) l1s_dsp_com.dsp_ndb_ptr->d_vaus_vol = ABB_L1_WRITE (VAUSCTRL, data); #endif } /* * ABB_Audio_PLL * * Configuration of VAUDPLL register * */ void ABB_Audio_PLL (UWORD16 data) { #if (ANLG_FAM == 3) l1s_dsp_com.dsp_ndb_ptr->d_vaud_pll = ABB_L1_WRITE (VAUDPLL, data); #endif } /* * ABB_Audio_VBPop * * Configuration of VBPOP register * */ void ABB_Audio_VBPop (UWORD16 data) { #if (ANLG_FAM == 3) l1s_dsp_com.dsp_ndb_ptr->d_vbpop = ABB_L1_WRITE (VBPOP, data); #endif } /* * ABB_Audio_Delay_Init * * Configuration of the delay initialization for POP noise reduction * */ void ABB_Audio_Delay_Init (UWORD8 delay) { #if (ANLG_FAM == 3) l1s_dsp_com.dsp_ndb_ptr->d_vau_delay_init = delay; #endif } /* * ABB_CAL_UlVolume * * Uplink audio volume calibration * * Parameter : pga index - range 0..24 * * When this function is called the Mute bit of VBUCTRL is set to zero */ void ABB_CAL_UlVolume (UWORD8 pga_index) { UWORD16 index; API reg_state; index = pga_index; if (index > MAX_PGA_UL) index = MAX_PGA_UL; //clip //mask side tone gain and the mute settings reg_state = l1s_dsp_com.dsp_ndb_ptr->d_vbuctrl &= 0xF800; l1s_dsp_com.dsp_ndb_ptr->d_vbuctrl = reg_state | ABB_L1_WRITE ( VBUCTRL, ABB_uplink_PGA_gain[index]); } /* * ABB_CAL_DlVolume * * Downlink audio volume calibration * * Parameter : volume - range 0 to 255, pga - range 0-12 * */ void ABB_CAL_DlVolume (UWORD8 volume_index, UWORD8 pga_index) { UWORD16 volume, pga; // Remember current volume for subsequent mute commands ABB_CurrentVolume = volume_index; // Normalize volume (0 to 5) if (volume_index > MAX_VOL_DL) volume_index=MAX_VOL_DL; //clip if (volume_index) volume = (volume_index / 50) + 1; else volume = volume_index; if (pga_index > MAX_PGA_DL) pga_index=MAX_PGA_DL; //clip pga = pga_index; l1s_dsp_com.dsp_ndb_ptr->d_vbdctrl = ABB_L1_WRITE ( VBDCTRL, (ABB_volume_control_gain[volume] << 4) | (ABB_downlink_PGA_gain[pga]) ); #if (L1_LIMITER == 1) if (l1s_dsp_com.dsp_ndb_ptr->d_aqi_status & B_LIM_ENABLE) l1_audio_lim_partial_update(); #endif } /* * ABB_DlVolume * * Control Downlink audio volume * * Parameter : volume - range 0 to 255 * */ void ABB_DlVolume (UWORD8 volume_index) { UWORD16 volume; API reg_state; // Remember current volume for subsequent mute commands ABB_CurrentVolume = volume_index; // Normalize volume (0 to 5) if (volume_index > MAX_VOL_DL) volume_index=MAX_VOL_DL; //clip if (volume_index) volume = (volume_index / 50) + 1; else volume = volume_index; //mask PGA setting determined during calibration phase reg_state = l1s_dsp_com.dsp_ndb_ptr->d_vbdctrl &= 0x03c0; l1s_dsp_com.dsp_ndb_ptr->d_vbdctrl = reg_state | ABB_L1_WRITE ( VBDCTRL, (ABB_volume_control_gain[volume] << 4)); #if (L1_LIMITER == 1) if (l1s_dsp_com.dsp_ndb_ptr->d_aqi_status & B_LIM_ENABLE) l1_audio_lim_partial_update(); #endif } /* * ABB_DlMute * * Mute downlink audio * * Parameter : Mute - On or Off * */ void ABB_DlMute (BOOL mute) { UWORD8 current_volume; if (mute) { /* * The current downlink volume must be memorized to avoid * having 0 as the new current volume. */ current_volume = ABB_CurrentVolume; ABB_DlVolume (0); ABB_CurrentVolume = current_volume; } else { ABB_DlVolume (ABB_CurrentVolume); } } /* * ABB_UlMute * * Mute uplink audio * * Parameter : Mute - On or Off * */ void ABB_UlMute (BOOL mute) { if (mute) { l1s_dsp_com.dsp_ndb_ptr->d_vbuctrl |= ABB_L1_WRITE ( VBUCTRL, DXEN); } else { l1s_dsp_com.dsp_ndb_ptr->d_vbuctrl &= 0x7fff; l1s_dsp_com.dsp_ndb_ptr->d_vbuctrl |= 0x01; } } /* * ABB_SideTone * * Control audio sidetone * * Parameter : volume - range 0 to 255 * nominal is 175 (-5dB) * */ void ABB_SideTone (UWORD8 volume_index) { UWORD16 side_tone; API reg_state; // Normalize sidetone (0 to 10) side_tone = volume_index / 25; // mask uplink PGA gain and mute settings reg_state = l1s_dsp_com.dsp_ndb_ptr->d_vbuctrl &= 0x87c0; l1s_dsp_com.dsp_ndb_ptr->d_vbuctrl = reg_state | ABB_L1_WRITE (VBUCTRL, (ABB_sidetone_gain[side_tone] << 5)); } #if INCLUDE_ABB_READ_DLGAIN /* * ABB_Read_DLVolume * * Returns the last controlled ABB DL gain in unsigned Q15 format * This value includes volume and PGA gain. * */ UWORD16 ABB_Read_DLGain() { UWORD16 volume_index; UWORD16 pga_index; // Read last programmed volume volume_index = (API)((l1s_dsp_com.dsp_ndb_ptr->d_vbdctrl >> 10) & 0x7); pga_index = (API)((l1s_dsp_com.dsp_ndb_ptr->d_vbdctrl >> 6) & 0xF); // Convert volume into gain (dB) return((ABB_DL_volume_read_gain[volume_index] * ABB_DL_PGA_read_gain[pga_index]) >> 15); } #endif /* INCLUDE_ABB_READ_DLGAIN */ #endif /* classic ABBs */ #if (ANLG_FAM == 11) // Downlink volume gain read in unsigned Q15 (in VBDCTRL) const WORD16 L1_audio_abb_DL_volume_read_gain[] = { (WORD16)0x2000 , // 0: -12 dB //omaps00090550 (WORD16)0x0000 , // 1: Mute //omaps00090550 (WORD16)0x8000 , // 2: 0 dB//omaps00090550 (WORD16)0x0800 , // 3: -24 dB//omaps00090550 (WORD16)0x1000 , // 4: -18 dB//omaps00090550 (WORD16)0x0000 , // 5: Mute//omaps00090550 (WORD16)0x4000 , // 6: -6 dB//omaps00090550 (WORD16)0x0000 , // 7: Mute//omaps00090550 }; // Downlink PGA gain read in unsigned Q15 (in VBDCTRL) const WORD16 L1_audio_abb_DL_PGA_read_gain[] = { (WORD16)0x4026 , // 0: - 6 dB//omaps00090550 (WORD16) 0x47FA , // 1: - 5 dB//omaps00090550 (WORD16)0x50C3 , // 2: - 4 dB//omaps00090550 (WORD16)0x5A9D , // 3: - 3 dB//omaps00090550 (WORD16)0x65AC , // 4: - 2 dB//omaps00090550 (WORD16)0x7214 , // 5: - 1 dB//omaps00090550 (WORD16)0x8000 , // 6: 0 dB//omaps00090550 (WORD16)0x8F9E , // 7: 1 dB//omaps00090550 (WORD16)0xA124 , // 8: 2 dB//omaps00090550 (WORD16)0xB4CE , // 9: 3 dB//omaps00090550 (WORD16)0xCADD , // 10: 4 dB//omaps00090550 (WORD16)0xE39E , // 11: 5 dB//omaps00090550 (WORD16)0xFF64 , // 12: 6 dB//omaps00090550 (WORD16)0x4026 , // 13: - 6 dB//omaps00090550 (WORD16)0x4026 , // 14: - 6 dB//omaps00090550 (WORD16)0x4026 , // 15: - 6 dB//omaps00090550 }; UWORD16 l1_audio_abb_Read_DLGain() { UWORD8 volume_index; UWORD8 pga_index; UWORD8 vdlgain; BspTwl3029_I2c_shadowRegRead(BSP_TWL3029_I2C_AUD, BSP_TWL_3029_MAP_AUDIO_VDLGAIN_OFFSET, &vdlgain); volume_index = ((vdlgain & 0x70) >> 4); // bits 4-6 pga_index = (vdlgain & 0x0f) ; //bits 0-3 // Convert volume into gain (dB) return((L1_audio_abb_DL_volume_read_gain[volume_index] * L1_audio_abb_DL_PGA_read_gain[pga_index]) >> 15); } void ABB_Audio_On_Off (UWORD16 data) { } #endif // ANLG_FAM == 11 #endif // CODE_VERSION != SIMULATION // Triton Audio ON/OFF Changes #if (CODE_VERSION == SIMULATION)&&(L1_AUDIO_MCU_ONOFF == 1) void l1_audio_abb_ul_on_req ( void(*callback_fn)(void) ) { callback_fn(); } void l1_audio_abb_dl_on_req ( void(*callback_fn)(void) ) { callback_fn(); } void l1_audio_abb_ul_off_req ( void(*callback_fn)(void) ) { callback_fn(); } void l1_audio_abb_dl_off_req ( void(*callback_fn)(void) ) { callback_fn(); } void l1_audio_abb_ul_off_dl_off_req ( void(*callback_fn)(void) ) { callback_fn(); } void l1_audio_abb_ul_off_dl_on_req ( void(*callback_fn)(void) ) { callback_fn(); } void l1_audio_abb_ul_on_dl_off_req ( void(*callback_fn)(void) ) { callback_fn(); } void l1_audio_abb_ul_on_dl_on_req ( void(*callback_fn)(void) ) { callback_fn(); } #endif // SIMULATION && L1_AUDIO_MCU_ONOFF // Triton Audio ON/OFF Changes #if ((CODE_VERSION == NOT_SIMULATION)&&(L1_AUDIO_MCU_ONOFF == 1)&&(OP_L1_STANDALONE == 1)&&(CHIPSET == 12)) void(*cb_array[3])(void); SYS_UWORD16 vauoctrl_status; extern NU_TIMER l1_audio_abb_ul_timer; extern NU_TIMER l1_audio_abb_dl_timer; extern NU_TIMER l1_audio_abb_ul_dl_timer; void l1_audio_abb_ul_on_req ( void(*callback_fn)(void) ) { SYS_UWORD16 reg; reg = ABB_Read_Register_on_page(PAGE1, VBUCTRL); ABB_Write_Register_on_page(PAGE1, VBUCTRL, reg|0x0200); ABB_Write_Register_on_page(PAGE0, TOGBR1, 0x0002); cb_array[0]=callback_fn; NU_Control_Timer(&l1_audio_abb_ul_timer, NU_ENABLE_TIMER); } void l1_audio_abb_dl_on_req ( void(*callback_fn)(void) ) { vauoctrl_status = ABB_Read_Register_on_page(PAGE1, VAUOCTRL); ABB_Write_Register_on_page(PAGE1, VAUOCTRL, 0x0000); ABB_Write_Register_on_page(PAGE0, TOGBR1, 0x0008); cb_array[1]=callback_fn; NU_Control_Timer(&l1_audio_abb_dl_timer, NU_ENABLE_TIMER); } void l1_audio_abb_ul_off_req ( void(*callback_fn)(void) ) { ABB_Write_Register_on_page(PAGE0, TOGBR1, 0x0001); callback_fn(); } void l1_audio_abb_dl_off_req ( void(*callback_fn)(void) ) { ABB_Write_Register_on_page(PAGE0, TOGBR1, 0x0004); callback_fn(); } void l1_audio_abb_ul_off_dl_off_req ( void(*callback_fn)(void) ) { ABB_Write_Register_on_page(PAGE0, TOGBR1, 0x0001|0x0004); callback_fn(); } void l1_audio_abb_ul_off_dl_on_req ( void(*callback_fn)(void) ) { vauoctrl_status = ABB_Read_Register_on_page(PAGE1, VAUOCTRL); ABB_Write_Register_on_page(PAGE1, VAUOCTRL, 0x0000); ABB_Write_Register_on_page(PAGE0, TOGBR1, 0x0008|0x0001); cb_array[1]=callback_fn; NU_Control_Timer(&l1_audio_abb_dl_timer, NU_ENABLE_TIMER); } void l1_audio_abb_ul_on_dl_off_req ( void(*callback_fn)(void) ) { SYS_UWORD16 reg; reg = ABB_Read_Register_on_page(PAGE1, VBUCTRL); ABB_Write_Register_on_page(PAGE1, VBUCTRL, reg|0x0200); ABB_Write_Register_on_page(PAGE0, TOGBR1, 0x0002|0x0004); cb_array[0]=callback_fn; NU_Control_Timer(&l1_audio_abb_ul_timer, NU_ENABLE_TIMER); } void l1_audio_abb_ul_on_dl_on_req ( void(*callback_fn)(void) ) { SYS_UWORD16 reg; reg = ABB_Read_Register_on_page(PAGE1, VBUCTRL); vauoctrl_status = ABB_Read_Register_on_page(PAGE1, VAUOCTRL); ABB_Write_Register_on_page(PAGE1, VAUOCTRL, 0x0000); ABB_Write_Register_on_page(PAGE1, VBUCTRL, reg|0x0200); ABB_Write_Register_on_page(PAGE0, TOGBR1, 0x0002|0x0008); cb_array[2]=callback_fn; NU_Control_Timer(&l1_audio_abb_ul_dl_timer, NU_ENABLE_TIMER); } void l1_audio_abb_onoff_timer_expiry(UNSIGNED index) { L1_trace_string("ON OFF Timer Expiry\r\n"); switch(index) { case 0: { SYS_UWORD16 reg; reg = ABB_Read_Register_on_page(PAGE1, VBUCTRL); ABB_Write_Register_on_page(PAGE1, VBUCTRL, reg&0x01FF); cb_array[0](); } break; case 1: { ABB_Write_Register_on_page(PAGE1, VAUOCTRL, vauoctrl_status); cb_array[1](); } break; case 2: { SYS_UWORD16 reg; reg = ABB_Read_Register_on_page(PAGE1, VBUCTRL); ABB_Write_Register_on_page(PAGE1, VBUCTRL, reg&0x01FF); ABB_Write_Register_on_page(PAGE1, VAUOCTRL, vauoctrl_status); cb_array[2](); } break; default: { while(1); } break; } } #endif // SIMULATION && L1_AUDIO_MCU_ONOFF // Triton Audio ON/OFF Changes #if (CODE_VERSION == NOT_SIMULATION)&&(L1_AUDIO_MCU_ONOFF == 1)&&(CHIPSET == 15) void(*cb_array[3])(void); UWORD8 cb_index = 0; void l1_audio_abb_ul_on_req ( void(*callback_fn)(void) ) { T_AUDIO_ON_OFF_CONTROL_RETURN ret; cb_array[cb_index] = callback_fn; ret.audio_on_off_callback = l1_audio_on_off_callback_fn; ret.callback_val = cb_index; cb_index++; if(cb_index == 3)cb_index = 0; bspTwl3029_audio_on_off_control (AUDIO_UPLINK_ON, AUDIO_DOWNLINK_NONE, ret, OUTEN_NONE); } void l1_audio_abb_dl_on_req ( void(*callback_fn)(void) ) { T_AUDIO_ON_OFF_CONTROL_RETURN ret; cb_array[cb_index] = callback_fn; ret.audio_on_off_callback = l1_audio_on_off_callback_fn; ret.callback_val = cb_index; cb_index++; if(cb_index == 3)cb_index = 0; bspTwl3029_audio_on_off_control (AUDIO_UPLINK_NONE, AUDIO_DOWNLINK_ON, ret, OUTEN_NONE); } void l1_audio_abb_ul_off_req ( void(*callback_fn)(void) ) { T_AUDIO_ON_OFF_CONTROL_RETURN ret; cb_array[cb_index] = callback_fn; ret.audio_on_off_callback = l1_audio_on_off_callback_fn; ret.callback_val = cb_index; cb_index++; if(cb_index == 3)cb_index = 0; bspTwl3029_audio_on_off_control (AUDIO_UPLINK_OFF, AUDIO_DOWNLINK_NONE, ret, OUTEN_NONE); } void l1_audio_abb_dl_off_req ( void(*callback_fn)(void) ) { T_AUDIO_ON_OFF_CONTROL_RETURN ret; cb_array[cb_index] = callback_fn; ret.audio_on_off_callback = l1_audio_on_off_callback_fn; ret.callback_val = cb_index; cb_index++; if(cb_index == 3)cb_index = 0; // Configure the outen reg to 0 only when STEREOPATH_DRV_STATE is in IDLE STATE if(l1s.audio_state[L1S_STEREOPATH_DRV_STATE] == 0) { bspTwl3029_audio_on_off_control (AUDIO_UPLINK_NONE, AUDIO_DOWNLINK_OFF, ret, OUTEN_DISABLE); } else { bspTwl3029_audio_on_off_control (AUDIO_UPLINK_NONE, AUDIO_DOWNLINK_OFF, ret, OUTEN_ENABLE); } } void l1_audio_abb_ul_off_dl_off_req ( void(*callback_fn)(void) ) { T_AUDIO_ON_OFF_CONTROL_RETURN ret; cb_array[cb_index] = callback_fn; ret.audio_on_off_callback = l1_audio_on_off_callback_fn; ret.callback_val = cb_index; cb_index++; if(cb_index == 3)cb_index = 0; // Configure the outen reg to 0 only when STEREOPATH_DRV_STATE is in IDLE STATE if(l1s.audio_state[L1S_STEREOPATH_DRV_STATE] == 0) { bspTwl3029_audio_on_off_control (AUDIO_UPLINK_OFF, AUDIO_DOWNLINK_OFF, ret, OUTEN_DISABLE); } else { bspTwl3029_audio_on_off_control (AUDIO_UPLINK_OFF, AUDIO_DOWNLINK_OFF, ret, OUTEN_ENABLE); } } void l1_audio_abb_ul_off_dl_on_req ( void(*callback_fn)(void) ) { T_AUDIO_ON_OFF_CONTROL_RETURN ret; cb_array[cb_index] = callback_fn; ret.audio_on_off_callback = l1_audio_on_off_callback_fn; ret.callback_val = cb_index; cb_index++; if(cb_index == 3)cb_index = 0; bspTwl3029_audio_on_off_control (AUDIO_UPLINK_OFF, AUDIO_DOWNLINK_ON, ret, OUTEN_NONE); } void l1_audio_abb_ul_on_dl_off_req ( void(*callback_fn)(void) ) { T_AUDIO_ON_OFF_CONTROL_RETURN ret; cb_array[cb_index] = callback_fn; ret.audio_on_off_callback = l1_audio_on_off_callback_fn; ret.callback_val = cb_index; cb_index++; if(cb_index == 3)cb_index = 0; // Configure the outen reg to 0 only when STEREOPATH_DRV_STATE is in IDLE STATE if(l1s.audio_state[L1S_STEREOPATH_DRV_STATE] == 0) { bspTwl3029_audio_on_off_control (AUDIO_UPLINK_ON, AUDIO_DOWNLINK_OFF, ret, OUTEN_DISABLE); } else { bspTwl3029_audio_on_off_control (AUDIO_UPLINK_ON, AUDIO_DOWNLINK_OFF, ret, OUTEN_ENABLE); } } void l1_audio_abb_ul_on_dl_on_req ( void(*callback_fn)(void) ) { T_AUDIO_ON_OFF_CONTROL_RETURN ret; cb_array[cb_index] = callback_fn; ret.audio_on_off_callback = l1_audio_on_off_callback_fn; ret.callback_val = cb_index; cb_index++; if(cb_index == 3)cb_index = 0; bspTwl3029_audio_on_off_control (AUDIO_UPLINK_ON, AUDIO_DOWNLINK_ON, ret, OUTEN_NONE); } void l1_audio_on_off_callback_fn(Uint8 callback_val) { cb_array[callback_val](); } #endif // SIMULATION && L1_AUDIO_MCU_ONOFF #if (AUDIO_DEBUG == 1) /*-------------------------------------------------------*/ /* l1_audio_regs_debug_read */ /*-------------------------------------------------------*/ /* Parameters : */ /* Return : */ /* */ /*-------------------------------------------------------*/ UWORD8 audio_reg_read_status; BspI2c_TransactionRequest audo_read_i2cIntTransArray[20]; BspTwl3029_I2C_RegData audio_regs[20]; UWORD8 audio_regs_cpy[20]; void l1_audio_reg_debug_read_callback(); void l1_audio_regs_debug_read() { BspTwl3029_I2C_RegisterInfo i2cRegArray[20]; BspTwl3029_I2C_RegisterInfo* i2cRegArrayPtr = i2cRegArray; BspTwl3029_I2C_Callback callback; BspTwl3029_I2C_CallbackPtr callbackPtr = &callback; callbackPtr->callbackFunc = (BspI2c_TransactionDoneCallback)l1_audio_reg_debug_read_callback; callbackPtr->callbackVal = (BspI2c_TransactionId)(1); callbackPtr->i2cTransArrayPtr = (Bsp_Twl3029_I2cTransReqArrayPtr)audo_read_i2cIntTransArray; if(audio_reg_read_status==0) { BspTwl3029_I2c_regQueRead(BSP_TWL3029_I2C_AUD, BSP_TWL_3029_MAP_AUDIO_PWRONSTATUS_OFFSET,&audio_regs[0],i2cRegArrayPtr++); BspTwl3029_I2c_regQueRead(BSP_TWL3029_I2C_AUD, BSP_TWL_3029_MAP_AUDIO_CTRL1_OFFSET,&audio_regs[1],i2cRegArrayPtr++); BspTwl3029_I2c_regQueRead(BSP_TWL3029_I2C_AUD, BSP_TWL_3029_MAP_AUDIO_CTRL2_OFFSET,&audio_regs[2],i2cRegArrayPtr++); BspTwl3029_I2c_regQueRead(BSP_TWL3029_I2C_AUD, BSP_TWL_3029_MAP_AUDIO_CTRL3_OFFSET,&audio_regs[3],i2cRegArrayPtr++); BspTwl3029_I2c_regQueRead(BSP_TWL3029_I2C_AUD, BSP_TWL_3029_MAP_AUDIO_CTRL4_OFFSET,&audio_regs[4],i2cRegArrayPtr++); BspTwl3029_I2c_regQueRead(BSP_TWL3029_I2C_AUD, BSP_TWL_3029_MAP_AUDIO_CTRL5_OFFSET,&audio_regs[5],i2cRegArrayPtr++); BspTwl3029_I2c_regQueRead(BSP_TWL3029_I2C_AUD, BSP_TWL_3029_MAP_AUDIO_CTRL6_OFFSET,&audio_regs[6],i2cRegArrayPtr++); BspTwl3029_I2c_regQueRead(BSP_TWL3029_I2C_AUD, BSP_TWL_3029_MAP_AUDIO_VULGAIN_OFFSET,&audio_regs[7],i2cRegArrayPtr++); BspTwl3029_I2c_regQueRead(BSP_TWL3029_I2C_AUD, BSP_TWL_3029_MAP_AUDIO_VDLGAIN_OFFSET,&audio_regs[8],i2cRegArrayPtr++); BspTwl3029_I2c_regQueRead(BSP_TWL3029_I2C_AUD, BSP_TWL_3029_MAP_AUDIO_OUTEN1_OFFSET,&audio_regs[9],i2cRegArrayPtr++); BspTwl3029_I2c_regQueRead(BSP_TWL3029_I2C_AUD, BSP_TWL_3029_MAP_AUDIO_OUTEN2_OFFSET,&audio_regs[10],i2cRegArrayPtr++); i2cRegArrayPtr = i2cRegArray; BspTwl3029_I2c_regInfoSend(i2cRegArrayPtr,11,callbackPtr, (BspI2c_TransactionRequest*)callbackPtr->i2cTransArrayPtr); } } void l1_audio_reg_debug_read_callback() { int i; audio_reg_read_status=1; for(i=0;i<20;i++) { audio_regs_cpy[i]=audio_regs[i]; } } #endif