FreeCalypso > hg > fc-tourmaline
view src/cs/layer1/audio_cfile/l1audio_async.c @ 303:f76436d19a7a default tip
!GPRS config: fix long-standing AT+COPS chance hanging bug
There has been a long-standing bug in FreeCalypso going back years:
sometimes in the AT command bring-up sequence of an ACI-only MS,
the AT+COPS command would produce only a power scan followed by
cessation of protocol stack activity (only L1 ADC traces), instead
of the expected network search sequence. This behaviour was seen
in different FC firmware versions going back to Citrine, and seemed
to follow some law of chance, not reliably repeatable.
This bug has been tracked down and found to be specific to !GPRS
configuration, stemming from our TCS2/TCS3 hybrid and reconstruction
of !GPRS support that was bitrotten in TCS3.2/LoCosto version.
ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3
version and had to be pulled from TCS2 - but as it turns out,
there is a new field in the MMR_REG_REQ primitive that needs to be
set correctly, and that psa_mms.c module is the place where this
initialization needed to be added.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Thu, 08 Jun 2023 08:23:37 +0000 |
| parents | 4e78acac3d88 |
| children |
line wrap: on
line source
/************* Revision Controle System Header ************* * GSM Layer 1 software * L1AUDIO_ASYNC.C * * Filename l1audio_async.c * Copyright 2003 (C) Texas Instruments * ************* Revision Controle System Header *************/ /************************************/ /* Include files... */ /************************************/ #include "l1_macro.h" #include "l1_confg.h" #if (AUDIO_TASK == 1) #include "l1_types.h" #include "sys_types.h" #if (CODE_VERSION == SIMULATION) && (AUDIO_SIMULATION) #include <stdlib.h> #include <string.h> #include "iq.h" // Debug / Init hardware ("eva3.lib") #include "l1_ver.h" #include "l1_const.h" #include "l1_signa.h" #include "cust_os.h" #if TESTMODE #include "l1tm_defty.h" #endif #include "l1audio_const.h" #include "l1audio_cust.h" #include "l1audio_signa.h" #include "l1audio_defty.h" #include "l1audio_msgty.h" #include "l1audio_varex.h" #include "l1audio_proto.h" #if (L1_GTT == 1) #include "l1gtt_const.h" #include "l1gtt_defty.h" #endif #if (L1_MIDI == 1) #include "l1midi_defty.h" #endif #if (L1_MP3 == 1) #include "l1mp3_defty.h" #endif #if (L1_AAC == 1) #include "l1aac_defty.h" #endif #if (L1_DYN_DSP_DWNLD==1) #include "l1_dyn_dwl_defty.h" #include "l1_dyn_dwl_const.h" #include "l1_dyn_dwl_signa.h" #endif #include "l1_defty.h" #include "l1_msgty.h" #include "l1_varex.h" #include "l1_mftab.h" #include "l1_tabs.h" #include "l1_ctl.h" #include "l1_time.h" #include "l1_scen.h" #else // Layer1 and debug include files. #include <ctype.h> #include <math.h> #include "l1_ver.h" #include "l1_const.h" #include "l1_signa.h" #include "cust_os.h" #if TESTMODE #include "l1tm_defty.h" #endif #include "l1audio_const.h" #include "l1audio_cust.h" #include "l1audio_signa.h" #include "l1audio_defty.h" #include "l1audio_msgty.h" #include "l1audio_varex.h" #include "l1audio_proto.h" #if (L1_GTT == 1) #include "l1gtt_const.h" #include "l1gtt_defty.h" #endif #if (L1_MP3 == 1) #include "l1mp3_defty.h" #endif #if (L1_MIDI == 1) #include "l1midi_defty.h" #endif #if (L1_AAC == 1) #include "l1aac_defty.h" #endif #if (L1_DYN_DSP_DWNLD==1) #include "l1_dyn_dwl_defty.h" #include "l1_dyn_dwl_const.h" #include "l1_dyn_dwl_signa.h" #endif #if (RF_FAM == 61) #include "l1_rf61.h" #endif #include "l1_defty.h" #include "l1_msgty.h" #include "tpudrv.h" // TPU drivers. ("eva3.lib") #include "l1_varex.h" #include "l1_proto.h" #include "l1_mftab.h" #include "l1_tabs.h" #include "mem.h" #include "armio.h" #include "timer.h" #include "timer1.h" #include "dma.h" #include "inth.h" #include "ulpd.h" #include "rhea_arm.h" #include "clkm.h" // Clockm ("eva3.lib") #include "l1_ctl.h" #include "l1_time.h" #if L2_L3_SIMUL #include "l1_scen.h" #endif #if (OP_RIV_AUDIO == 1) #include "rv_general.h" #include "audio_api.h" #include "audio_structs_i.h" #include "audio_var_i.h" #include "audio_macro_i.h" #include "audio_const_i.h" #endif #endif #include "l1audio_macro.h" #if(L1_DYN_DSP_DWNLD == 1) #if (TRACE_TYPE == 1) ||(TRACE_TYPE == 4) || (TRACE_TYPE == 5) || (TRACE_TYPE == 7) || (TESTMODE) #include "l1_trace.h" #endif #if(CODE_VERSION == SIMULATION) extern void trace_fct_simu_dyn_dwnld(CHAR *fct_name); #endif #endif #if 0 #if (L1_MP3) extern T_MP3_MCU_DSP *mp3_ndb;//Mp3-FR #endif //#pragma DUPLICATE_FOR_INTERNAL_RAM_END #endif #if ( L1_AAC) extern UWORD16 a_aac_dma_input_buffer[2][C_AAC_OUTPUT_BUFFER_SIZE]; extern UWORD8 d_aac_dma_current_buffer_id; #endif #if (L1_MP3) extern T_MP3_MCU_DSP *mp3_ndb;//Mp3-FR #endif /**************************************/ /* Prototypes for L1 ASYNCH task */ /**************************************/ #if (OP_RIV_AUDIO == 1) #if (L1_AUDIO_DRIVER == 1) void l1a_audio_driver_process (xSignalHeaderRec *msg); #endif #endif #if (KEYBEEP) void l1a_mmi_keybeep_process (xSignalHeaderRec *msg); #endif #if (TONE) void l1a_mmi_tone_process (xSignalHeaderRec *msg); #endif #if (L1_CPORT == 1) void l1a_mmi_cport_process (xSignalHeaderRec *msg); #endif #if (MELODY_E1) void l1a_mmi_melody0_process (xSignalHeaderRec *msg); void l1a_mmi_melody1_process (xSignalHeaderRec *msg); #endif #if (VOICE_MEMO) void l1a_mmi_vm_playing_proccess (xSignalHeaderRec *msg); void l1a_mmi_vm_recording_process (xSignalHeaderRec *msg); #endif #if (L1_PCM_EXTRACTION) void l1a_mmi_pcm_download_process (xSignalHeaderRec *msg); void l1a_mmi_pcm_upload_process (xSignalHeaderRec *msg); #endif #if (L1_VOICE_MEMO_AMR) void l1a_mmi_vm_amr_playing_proccess (xSignalHeaderRec *msg); void l1a_mmi_vm_amr_recording_process(xSignalHeaderRec *msg); #endif #if (SPEECH_RECO) void l1a_mmi_sr_enroll_process (xSignalHeaderRec *msg); void l1a_mmi_sr_update_process (xSignalHeaderRec *msg); void l1a_mmi_sr_reco_process (xSignalHeaderRec *msg); void l1a_mmi_sr_update_check_process(xSignalHeaderRec *msg); #endif #if (AEC == 1) void l1a_mmi_aec_process (xSignalHeaderRec *msg); #endif #if (AEC == 2) void l1a_mmi_aec_process (xSignalHeaderRec *msg); #endif #if (FIR) void l1a_mmi_fir_process (xSignalHeaderRec *msg); #endif #if (AUDIO_MODE) void l1a_mmi_audio_mode_process (xSignalHeaderRec *msg); #endif #if (MELODY_E2) void l1a_mmi_melody0_e2_process (xSignalHeaderRec *msg); void l1a_mmi_melody1_e2_process (xSignalHeaderRec *msg); #endif #if (L1_EXTERNAL_AUDIO_VOICE_ONOFF == 1) void l1a_mmi_audio_onoff_process (xSignalHeaderRec *msg); #endif #if (L1_EXT_AUDIO_MGT == 1) void l1a_mmi_ext_audio_mgt_process (xSignalHeaderRec *msg); #endif #if (L1_ANR == 1 || L1_ANR == 2) void l1a_mmi_anr_process (xSignalHeaderRec *msg); #endif #if (L1_AGC_UL == 1) void l1a_mmi_agc_ul_process (xSignalHeaderRec *msg); #endif #if (L1_AGC_DL == 1) void l1a_mmi_agc_dl_process (xSignalHeaderRec *msg); #endif #if (L1_IIR == 1 || L1_IIR == 2) void l1a_mmi_iir_process (xSignalHeaderRec *msg); #endif #if (L1_WCM == 1) void l1a_mmi_wcm_process (xSignalHeaderRec *msg); #endif #if (L1_DRC == 1) void l1a_mmi_drc_process (xSignalHeaderRec *msg); #endif #if (L1_LIMITER == 1) void l1a_mmi_limiter_process (xSignalHeaderRec *msg); #endif #if (L1_ES == 1) void l1a_mmi_es_process (xSignalHeaderRec *msg); #endif #if (L1_DYN_DSP_DWNLD == 1) void l1a_mmi_vocoder_cfg_process(xSignalHeaderRec *msg); #endif #if(L1_BT_AUDIO==1) void l1a_mmi_bt_process(xSignalHeaderRec *msg); #endif /**************************************/ /* External prototypes */ /**************************************/ extern UWORD8 copy_data_from_buffer (UWORD8 session_id, UWORD16 *buffer_size, UWORD16 **ptr_buf, UWORD16 data_size, API *ptr_dst); extern UWORD8 copy_data_to_buffer (UWORD8 session_id, UWORD16 *buffer_size, UWORD16 **ptr_buf, UWORD16 data_size, API *ptr_src); extern UWORD8 Cust_get_pointer (UWORD16 **ptr, UWORD16 *buffer_size, UWORD8 session_id); #if (MELODY_E2) extern UWORD8 copy_byte_data_from_buffer (UWORD8 session_id, UWORD16 *buffer_size, UWORD8 **ptr_buf, UWORD16 data_size, UWORD8 *ptr_dst); extern UWORD8 copy_byte_data_to_buffer (UWORD8 session_id, UWORD16 *buffer_size, UWORD8 **ptr_buf, UWORD16 data_size, UWORD8 *ptr_src); #endif #if (L1_EXT_AUDIO_MGT == 1) T_MIDI_DMA_PARAM midi_buf; #if (CODE_VERSION == NOT_SIMULATION) #pragma DATA_SECTION(midi_buf,".l1s_global") #endif extern void l1_ext_audio_mgt_dma_handler(SYS_UWORD16 dma_status); #endif #if(L1_BT_AUDIO ==1) BOOL midi_task_running; extern T_L1_BT_AUDIO bt_audio; extern void l1_audio_bt_init(UINT16 media_buf_size); #endif #if (OP_RIV_AUDIO == 1) #if (L1_AUDIO_DRIVER == 1) void l1a_audio_driver_process(xSignalHeaderRec *msg) { UWORD32 SignalCode = msg->SignalCode; if (SignalCode == L1_AUDIO_DRIVER_IND) l1a_audio_send_result(AUDIO_DRIVER_NOTIFICATION_MSG, msg, MMI_QUEUE); } #endif #endif #if (KEYBEEP) /*-------------------------------------------------------*/ /* l1a_mmi_keybeep_process() */ /*-------------------------------------------------------*/ /* */ /* Description: */ /* ------------ */ /* This function is a state machine which handles the */ /* keybeep feature. */ /* */ /* Starting messages: MMI_KEYBEEP_START_REQ */ /* */ /* Result messages (input): L1_KEYBEEP_START_CON */ /* */ /* Result messages (output): MMI_KEYBEEP_START_CON */ /* */ /* Reset messages (input): none */ /* */ /* Stop message (input): MMI_KEYBEEP_STOP_REQ */ /* L1_KEYBEEP_STOP_CON */ /* */ /* Stop message (output): MMI_KEYBEEP_STOP_CON */ /* */ /* Rem: */ /* ---- */ /* */ /*-------------------------------------------------------*/ void l1a_mmi_keybeep_process(xSignalHeaderRec *msg) { enum states { RESET = 0, WAIT_START_REQ = 1, WAIT_START_CON = 2, WAIT_STOP = 3 }; UWORD8 *state = &l1a.state[L1A_KEYBEEP_STATE]; UWORD32 SignalCode = msg->SignalCode; while(1) { switch(*state) { case RESET: { // Reset the command l1a_l1s_com.keybeep_task.command.start = FALSE; l1a_l1s_com.keybeep_task.command.stop = FALSE; *state = WAIT_START_REQ; } break; case WAIT_START_REQ: { if (SignalCode == MMI_KEYBEEP_START_REQ) { // Download the keybeep description in the NDB. l1s_dsp_com.dsp_ndb_ptr->d_k_x1_kt0= ((T_MMI_KEYBEEP_REQ *)(msg->SigP))->d_k_x1_kt0; l1s_dsp_com.dsp_ndb_ptr->d_k_x1_kt1= ((T_MMI_KEYBEEP_REQ *)(msg->SigP))->d_k_x1_kt1; l1s_dsp_com.dsp_ndb_ptr->d_dur_kb = ((T_MMI_KEYBEEP_REQ *)(msg->SigP))->d_dur_kb; // Start the L1S keybeep task l1a_l1s_com.keybeep_task.command.start = TRUE; *state = WAIT_START_CON; } // End process return; } // OMPAS00090550 break; case WAIT_START_CON: { if (SignalCode == L1_KEYBEEP_START_CON) { // Disable the start command l1a_l1s_com.keybeep_task.command.start = FALSE; // Send the start confirmation message l1a_audio_send_confirmation(MMI_KEYBEEP_START_CON); *state = WAIT_STOP; } // End process return; } // ompas00090550 break; case WAIT_STOP: { if (SignalCode == MMI_KEYBEEP_STOP_REQ) { // Stop the L1S keybeep task l1a_l1s_com.keybeep_task.command.stop = TRUE; // End process return; } else if (SignalCode == L1_KEYBEEP_STOP_CON) { // Send the stop confirmation message l1a_audio_send_confirmation(MMI_KEYBEEP_STOP_CON); *state = RESET; } else { // End process return; } } // omaps00090550 break; } // switch } // while(1) } #endif // KEYBEEP #if (TONE) /*-------------------------------------------------------*/ /* l1a_mmi_tone_process() */ /*-------------------------------------------------------*/ /* */ /* Description: */ /* ------------ */ /* This function is a state machine which handles the */ /* tone feature. */ /* */ /* Starting messages: MMI_TONE_START_REQ */ /* */ /* Result messages (input): L1_TONE_START_CON */ /* */ /* Result messages (output): MMI_TONE_START_CON */ /* */ /* Reset messages (input): none */ /* */ /* Stop message (input): MMI_TONE_STOP_REQ */ /* L1_TONE_STOP_CON */ /* */ /* Stop message (output): MMI_TONE_STOP_CON */ /* */ /* Rem: */ /* ---- */ /* */ /*-------------------------------------------------------*/ void l1a_mmi_tone_process(xSignalHeaderRec *msg) { enum states { RESET = 0, WAIT_START_REQ = 1, WAIT_START_CON = 2, WAIT_STOP = 3 }; UWORD8 *state = &l1a.state[L1A_TONE_STATE]; UWORD32 SignalCode = msg->SignalCode; while(1) { switch(*state) { case RESET: { // Reset the command l1a_l1s_com.tone_task.command.start = FALSE; l1a_l1s_com.tone_task.command.stop = FALSE; *state = WAIT_START_REQ; } break; case WAIT_START_REQ: { if (SignalCode == MMI_TONE_START_REQ) { // Download the tone description in the NDB. l1s_dsp_com.dsp_ndb_ptr->d_k_x1_t0 = ((T_MMI_TONE_REQ *)(msg->SigP))->d_k_x1_t0; l1s_dsp_com.dsp_ndb_ptr->d_k_x1_t1 = ((T_MMI_TONE_REQ *)(msg->SigP))->d_k_x1_t1; l1s_dsp_com.dsp_ndb_ptr->d_k_x1_t2 = ((T_MMI_TONE_REQ *)(msg->SigP))->d_k_x1_t2; l1s_dsp_com.dsp_ndb_ptr->d_pe_rep = ((T_MMI_TONE_REQ *)(msg->SigP))->d_pe_rep; l1s_dsp_com.dsp_ndb_ptr->d_pe_off = ((T_MMI_TONE_REQ *)(msg->SigP))->d_pe_off; l1s_dsp_com.dsp_ndb_ptr->d_se_off = ((T_MMI_TONE_REQ *)(msg->SigP))->d_se_off; l1s_dsp_com.dsp_ndb_ptr->d_bu_off = ((T_MMI_TONE_REQ *)(msg->SigP))->d_bu_off; l1s_dsp_com.dsp_ndb_ptr->d_t0_on = ((T_MMI_TONE_REQ *)(msg->SigP))->d_t0_on; l1s_dsp_com.dsp_ndb_ptr->d_t0_off = ((T_MMI_TONE_REQ *)(msg->SigP))->d_t0_off; l1s_dsp_com.dsp_ndb_ptr->d_t1_on = ((T_MMI_TONE_REQ *)(msg->SigP))->d_t1_on; l1s_dsp_com.dsp_ndb_ptr->d_t1_off = ((T_MMI_TONE_REQ *)(msg->SigP))->d_t1_off; l1s_dsp_com.dsp_ndb_ptr->d_t2_on = ((T_MMI_TONE_REQ *)(msg->SigP))->d_t2_on; l1s_dsp_com.dsp_ndb_ptr->d_t2_off = ((T_MMI_TONE_REQ *)(msg->SigP))->d_t2_off; // Start the L1S tone task l1a_l1s_com.tone_task.command.start = TRUE; *state = WAIT_START_CON; } // End process return; } //omaps00090550 break; case WAIT_START_CON: { if (SignalCode == L1_TONE_START_CON) { // Disable the start command l1a_l1s_com.tone_task.command.start = FALSE; // Send the start confirmation message l1a_audio_send_confirmation(MMI_TONE_START_CON); *state = WAIT_STOP; } // End process return; } // omaps00090550 break; case WAIT_STOP: { if (SignalCode == MMI_TONE_STOP_REQ) { // Stop the L1S tone task l1a_l1s_com.tone_task.command.stop = TRUE; // End process return; } else if (SignalCode == L1_TONE_STOP_CON) { // Send the stop confirmation message l1a_audio_send_confirmation(MMI_TONE_STOP_CON); *state = RESET; } else { // End process return; } } break; } // switch } // while(1) } #endif // TONE #if (MELODY_E1) /*-------------------------------------------------------*/ /* l1a_mmi_melody0_process() */ /*-------------------------------------------------------*/ /* */ /* Description: */ /* ------------ */ /* This function is a state machine which handles the */ /* melody 0 feature. */ /* */ /* Starting messages: MMI_MELODY0_START_REQ */ /* */ /* Result messages (input): L1_MELODY0_START_CON */ /* */ /* Result messages (output): MMI_MELODY0_START_CON */ /* */ /* Reset messages (input): none */ /* */ /* Stop message (input): MMI_MELDOY0_STOP_REQ */ /* L1_MELODY0_STOP_CON */ /* */ /* Stop message (output): MMI_MELODY0_STOP_CON */ /* */ /* Rem: */ /* ---- */ /* */ /*-------------------------------------------------------*/ void l1a_mmi_melody0_process(xSignalHeaderRec *msg) { enum states { M0_RESET = 0, M0_WAIT_START_REQ = 1, M0_WAIT_START_CON = 2, M0_WAIT_STOP = 3 }; UWORD8 *state = &l1a.state[L1A_MELODY0_STATE]; UWORD32 SignalCode = msg->SignalCode; UWORD8 melody_osc, used_osc; while(1) { switch(*state) { case M0_RESET: { // Reset the commands: l1a_l1s_com.melody0_task.command.start = FALSE; l1a_l1s_com.melody0_task.command.stop = FALSE; // Initialize the translation table for (melody_osc=0; melody_osc<SC_NUMBER_OSCILLATOR; melody_osc++) l1a_l1s_com.melody0_task.parameters.melody_to_oscillator[melody_osc] = SC_NUMBER_OSCILLATOR; *state = M0_WAIT_START_REQ; } break; case M0_WAIT_START_REQ: { if (SignalCode == MMI_MELODY0_START_REQ) { // Download the parameters from the message: l1a_l1s_com.melody0_task.parameters.session_id = ((T_MMI_MELODY_REQ *)(msg->SigP))->session_id; l1a_l1s_com.melody0_task.parameters.loopback = ((T_MMI_MELODY_REQ *)(msg->SigP))->loopback; l1a_l1s_com.melody0_task.parameters.oscillator_used_bitmap = ((T_MMI_MELODY_REQ *)(msg->SigP))->oscillator_used_bitmap; // Initialize the buffer parameters l1a_l1s_com.melody0_task.parameters.ptr_buf = NULL; l1a_l1s_com.melody0_task.parameters.buffer_size = 0; l1a_l1s_com.melody0_task.parameters.error_id = Cust_get_pointer((UWORD16 **)&l1a_l1s_com.melody0_task.parameters.ptr_buf, &l1a_l1s_com.melody0_task.parameters.buffer_size, l1a_l1s_com.melody0_task.parameters.session_id); // Read the Header of the melody description to have the melody bitmap l1a_l1s_com.melody0_task.parameters.error_id = copy_data_from_buffer (l1a_l1s_com.melody0_task.parameters.session_id, &l1a_l1s_com.melody0_task.parameters.buffer_size, (UWORD16 **)&l1a_l1s_com.melody0_task.parameters.ptr_buf, 1, &l1a_l1s_com.melody0_task.parameters.oscillator_melody_bitmap); l1a_l1s_com.melody0_task.parameters.oscillator_melody_bitmap = Field(l1a_l1s_com.melody0_task.parameters.oscillator_melody_bitmap, SC_MELO_OSCILLATOR_USED_MASK, SC_MELO_OSCILLATOR_USED_SHIFT); // Build the array of translation between the melody mapping and the oscillators used used_osc = 0; melody_osc = 0; while ( (melody_osc < SC_NUMBER_OSCILLATOR) && (used_osc < SC_NUMBER_OSCILLATOR) ) { // find the next oscillator available in the melody while( ((l1a_l1s_com.melody0_task.parameters.oscillator_melody_bitmap & (0x1<<melody_osc)) == 0) && (melody_osc < SC_NUMBER_OSCILLATOR) ) melody_osc++; // find the next oscillator available in the oscillator used while( ((l1a_l1s_com.melody0_task.parameters.oscillator_used_bitmap & (0x1<<used_osc)) == 0) && (melody_osc < SC_NUMBER_OSCILLATOR) ) used_osc++; // Fill the translation table if ( (melody_osc < SC_NUMBER_OSCILLATOR) && (used_osc < SC_NUMBER_OSCILLATOR) ) l1a_l1s_com.melody0_task.parameters.melody_to_oscillator[melody_osc] = used_osc; melody_osc++; used_osc++; } // Start the melody 0 L1S task: l1a_l1s_com.melody0_task.command.start = TRUE; *state = M0_WAIT_START_CON; } // End process return; } // omaps00090550 break; case M0_WAIT_START_CON: { if (SignalCode == L1_MELODY0_START_CON) { // Disable the start command l1a_l1s_com.melody0_task.command.start = FALSE; // Send the start confirmation message l1a_audio_send_confirmation(MMI_MELODY0_START_CON); *state = M0_WAIT_STOP; } // End process return; } // omaps00090550 break; case M0_WAIT_STOP: { if (SignalCode == L1_MELODY0_STOP_CON) { // Send the stop confirmation message l1a_audio_send_confirmation(MMI_MELODY0_STOP_CON); *state = M0_RESET; } else if (SignalCode == MMI_MELODY0_STOP_REQ) { // Stop the melody 0 L1S task: l1a_l1s_com.melody0_task.command.stop = TRUE; // End process return; } else { // End process return; } } break; } // switch } // while(1) } /*-------------------------------------------------------*/ /* l1a_mmi_melody1_process() */ /*-------------------------------------------------------*/ /* */ /* Description: */ /* ------------ */ /* This function is a state machine which handles the */ /* melody 1 feature. */ /* */ /* Starting messages: MMI_MELODY1_START_REQ */ /* */ /* Result messages (input): L1_MELODY1_START_CON */ /* */ /* Result messages (output): MMI_MELODY1_START_CON */ /* */ /* Reset messages (input): none */ /* */ /* Stop message (input): MMI_MELDOY1_STOP_REQ */ /* L1_MELODY1_STOP_CON */ /* */ /* Stop message (output): MMI_MELODY1_STOP_CON */ /* */ /* Rem: */ /* ---- */ /* */ /*-------------------------------------------------------*/ void l1a_mmi_melody1_process(xSignalHeaderRec *msg) { enum states { M1_RESET = 0, M1_WAIT_START_REQ = 1, M1_WAIT_START_CON = 2, M1_WAIT_STOP = 3 }; UWORD8 *state = &l1a.state[L1A_MELODY1_STATE]; UWORD32 SignalCode = msg->SignalCode; UWORD8 melody_osc, used_osc; while(1) { switch(*state) { case M1_RESET: { // Reset the commands: l1a_l1s_com.melody1_task.command.start = FALSE; l1a_l1s_com.melody1_task.command.stop = FALSE; // Initialize the translation table for (melody_osc=0; melody_osc<SC_NUMBER_OSCILLATOR; melody_osc++) l1a_l1s_com.melody1_task.parameters.melody_to_oscillator[melody_osc] = SC_NUMBER_OSCILLATOR; *state = M1_WAIT_START_REQ; } break; case M1_WAIT_START_REQ: { if (SignalCode == MMI_MELODY1_START_REQ) { // Download the parameters from the message: l1a_l1s_com.melody1_task.parameters.session_id = ((T_MMI_MELODY_REQ *)(msg->SigP))->session_id; l1a_l1s_com.melody1_task.parameters.loopback = ((T_MMI_MELODY_REQ *)(msg->SigP))->loopback; l1a_l1s_com.melody1_task.parameters.oscillator_used_bitmap = ((T_MMI_MELODY_REQ *)(msg->SigP))->oscillator_used_bitmap; // Initialize the buffer parameters l1a_l1s_com.melody1_task.parameters.ptr_buf = NULL; l1a_l1s_com.melody1_task.parameters.buffer_size = 0; l1a_l1s_com.melody1_task.parameters.error_id = Cust_get_pointer((UWORD16 **)&l1a_l1s_com.melody1_task.parameters.ptr_buf, &l1a_l1s_com.melody1_task.parameters.buffer_size, l1a_l1s_com.melody1_task.parameters.session_id); // Read the Header of the melody description to have the melody bitmap l1a_l1s_com.melody1_task.parameters.error_id = copy_data_from_buffer (l1a_l1s_com.melody1_task.parameters.session_id, &l1a_l1s_com.melody1_task.parameters.buffer_size, (UWORD16 **)&l1a_l1s_com.melody1_task.parameters.ptr_buf, 1, &l1a_l1s_com.melody1_task.parameters.oscillator_melody_bitmap); l1a_l1s_com.melody1_task.parameters.oscillator_melody_bitmap = Field(l1a_l1s_com.melody1_task.parameters.oscillator_melody_bitmap, SC_MELO_OSCILLATOR_USED_MASK, SC_MELO_OSCILLATOR_USED_SHIFT); // Build the array of translation between the melody maaping and the oscillators used used_osc = 0; melody_osc = 0; while ( (melody_osc < SC_NUMBER_OSCILLATOR) && (used_osc < SC_NUMBER_OSCILLATOR) ) { // find the next oscillator available in the melody while( ((l1a_l1s_com.melody1_task.parameters.oscillator_melody_bitmap & (0x1<<melody_osc)) == 0) && (melody_osc < SC_NUMBER_OSCILLATOR) ) melody_osc++; // find the next oscillator available in the oscillator used while( ((l1a_l1s_com.melody1_task.parameters.oscillator_used_bitmap & (0x1<<used_osc)) == 0) && (melody_osc < SC_NUMBER_OSCILLATOR) ) used_osc++; // Fill the translation table if ( (melody_osc < SC_NUMBER_OSCILLATOR) && (used_osc < SC_NUMBER_OSCILLATOR) ) l1a_l1s_com.melody1_task.parameters.melody_to_oscillator[melody_osc] = used_osc; melody_osc++; used_osc++; } // Start the melody 1 L1S task: l1a_l1s_com.melody1_task.command.start = TRUE; *state = M1_WAIT_START_CON; } // End process return; } // omaps00090550 break; case M1_WAIT_START_CON: { if (SignalCode == L1_MELODY1_START_CON) { // Disable the start command l1a_l1s_com.melody1_task.command.start = FALSE; // Send the start confirmation message l1a_audio_send_confirmation(MMI_MELODY1_START_CON); *state = M1_WAIT_STOP; } // End process return; } // omaps00090550 break; case M1_WAIT_STOP: { if (SignalCode == L1_MELODY1_STOP_CON) { // Send the stop confirmation message l1a_audio_send_confirmation(MMI_MELODY1_STOP_CON); *state = M1_RESET; } else if (SignalCode == MMI_MELODY1_STOP_REQ) { // Stop the melody 0 L1S task: l1a_l1s_com.melody1_task.command.stop = TRUE; // End process return; } else { // End process return; } } break; } // switch } // while(1) } #endif // MELODY_E1 #if (VOICE_MEMO) /*-------------------------------------------------------*/ /* l1a_mmi_vm_playing_process() */ /*-------------------------------------------------------*/ /* */ /* Description: */ /* ------------ */ /* This function is a state machine which handles the */ /* voice memorization playing feature. */ /* */ /* Starting messages: MMI_VM_PLAY_START_REQ */ /* */ /* Result messages (input): L1_VM_PLAY_START_CON */ /* */ /* Result messages (output): MMI_VM_PLAY_START_CON */ /* */ /* Reset messages (input): none */ /* */ /* Stop message (input): MMI_VM_PLAY_STOP_REQ */ /* L1_VM_PLAY_STOP_CON */ /* */ /* Stop message (output): MMI_VM_PLAY_STOP_CON */ /* */ /* Rem: */ /* ---- */ /* */ /*-------------------------------------------------------*/ void l1a_mmi_vm_playing_process(xSignalHeaderRec *msg) { enum states { RESET = 0, WAIT_START_REQ = 1, WAIT_START_CON = 2, WAIT_STOP = 3 }; UWORD8 *state = &l1a.state[L1A_VM_PLAY_STATE]; UWORD32 SignalCode = msg->SignalCode; while(1) { switch(*state) { case RESET: { // Reset the commands l1a_l1s_com.voicememo_task.play.command.start = FALSE; l1a_l1s_com.voicememo_task.play.command.stop = FALSE; *state = WAIT_START_REQ; } break; case WAIT_START_REQ: { if (SignalCode == MMI_VM_PLAY_START_REQ) { // Download the parameters of the message to the l1a_l1s_com structure. l1a_l1s_com.voicememo_task.play.parameters.session_id = ((T_MMI_VM_PLAY_REQ *)(msg->SigP))->session_id; // Start the L1S voice memo playing task l1a_l1s_com.voicememo_task.play.command.start = TRUE; *state = WAIT_START_CON; } // End process return; } // omaps00090550 break; case WAIT_START_CON: { if (SignalCode == L1_VM_PLAY_START_CON) { // Reset the start command l1a_l1s_com.voicememo_task.play.command.start = FALSE; // Send the start confirmation message l1a_audio_send_confirmation(MMI_VM_PLAY_START_CON); *state = WAIT_STOP; } // End process return; } // omaps00090550 break; case WAIT_STOP: { if (SignalCode == MMI_VM_PLAY_STOP_REQ) { // Stop the L1S voice memo playing task l1a_l1s_com.voicememo_task.play.command.stop = TRUE; // End process return; } else if (SignalCode == L1_VM_PLAY_STOP_CON) { // Send the stop confirmation message l1a_audio_send_confirmation(MMI_VM_PLAY_STOP_CON); *state = RESET; } else { // End process return; } } break; } // switch } // while(1) } /*-------------------------------------------------------*/ /* l1a_mmi_vm_recording_process() */ /*-------------------------------------------------------*/ /* */ /* Description: */ /* ------------ */ /* This function is a state machine which handles the */ /* voice memorization recording feature. */ /* */ /* Starting messages: MMI_VM_RECORD_START_REQ */ /* */ /* Result messages (input): L1_VM_RECORD_START_CON */ /* */ /* Result messages (output): MMI_VM_RECORD_START_CON */ /* */ /* Reset messages (input): none */ /* */ /* Stop message (input): MMI_VM_RECORD_STOP_REQ */ /* L1_VM_RECORD_STOP_CON */ /* */ /* Stop message (output): MMI_VM_RECORD_STOP_CON */ /* */ /* Rem: */ /* ---- */ /* */ /*-------------------------------------------------------*/ void l1a_mmi_vm_recording_process(xSignalHeaderRec *msg) { enum states { RESET = 0, WAIT_START_REQ = 1, WAIT_START_CON = 2, WAIT_STOP = 3 }; UWORD8 *state = &l1a.state[L1A_VM_RECORD_STATE]; UWORD32 SignalCode = msg->SignalCode; while(1) { switch(*state) { case RESET: { // Reset the commands l1a_l1s_com.voicememo_task.record.command.start = FALSE; l1a_l1s_com.voicememo_task.record.command.stop = FALSE; l1a_l1s_com.voicememo_task.record.tone_ul.start = FALSE; *state = WAIT_START_REQ; } break; case WAIT_START_REQ: { if (SignalCode == MMI_VM_RECORD_START_REQ) { // Download the parameters of the message to the l1a_l1s_com structure. l1a_l1s_com.voicememo_task.record.parameters.session_id = ((T_MMI_VM_RECORD_REQ *)(msg->SigP))->session_id; l1a_l1s_com.voicememo_task.record.parameters.maximum_size = ((T_MMI_VM_RECORD_REQ *)(msg->SigP))->maximum_size; l1a_l1s_com.voicememo_task.record.parameters.dtx = ((T_MMI_VM_RECORD_REQ *)(msg->SigP))->dtx_used; // Download UL/DL audio gain to the NDB l1s_dsp_com.dsp_ndb_ptr->d_shiftul = ((T_MMI_VM_RECORD_REQ *)(msg->SigP))->record_coeff_ul; l1s_dsp_com.dsp_ndb_ptr->d_shiftdl = ((T_MMI_VM_RECORD_REQ *)(msg->SigP))->record_coeff_dl; // Download the tone description in the NDB. l1s_dsp_com.dsp_ndb_ptr->d_k_x1_t0 = ((T_MMI_VM_RECORD_REQ *)(msg->SigP))->d_k_x1_t0; l1s_dsp_com.dsp_ndb_ptr->d_k_x1_t1 = ((T_MMI_VM_RECORD_REQ *)(msg->SigP))->d_k_x1_t1; l1s_dsp_com.dsp_ndb_ptr->d_k_x1_t2 = ((T_MMI_VM_RECORD_REQ *)(msg->SigP))->d_k_x1_t2; l1s_dsp_com.dsp_ndb_ptr->d_pe_rep = ((T_MMI_VM_RECORD_REQ *)(msg->SigP))->d_pe_rep; l1s_dsp_com.dsp_ndb_ptr->d_pe_off = ((T_MMI_VM_RECORD_REQ *)(msg->SigP))->d_pe_off; l1s_dsp_com.dsp_ndb_ptr->d_se_off = ((T_MMI_VM_RECORD_REQ *)(msg->SigP))->d_se_off; l1s_dsp_com.dsp_ndb_ptr->d_bu_off = ((T_MMI_VM_RECORD_REQ *)(msg->SigP))->d_bu_off; l1s_dsp_com.dsp_ndb_ptr->d_t0_on = ((T_MMI_VM_RECORD_REQ *)(msg->SigP))->d_t0_on; l1s_dsp_com.dsp_ndb_ptr->d_t0_off = ((T_MMI_VM_RECORD_REQ *)(msg->SigP))->d_t0_off; l1s_dsp_com.dsp_ndb_ptr->d_t1_on = ((T_MMI_VM_RECORD_REQ *)(msg->SigP))->d_t1_on; l1s_dsp_com.dsp_ndb_ptr->d_t1_off = ((T_MMI_VM_RECORD_REQ *)(msg->SigP))->d_t1_off; l1s_dsp_com.dsp_ndb_ptr->d_t2_on = ((T_MMI_VM_RECORD_REQ *)(msg->SigP))->d_t2_on; l1s_dsp_com.dsp_ndb_ptr->d_t2_off = ((T_MMI_VM_RECORD_REQ *)(msg->SigP))->d_t2_off; // Start the L1S voice memo recording task l1a_l1s_com.voicememo_task.record.command.start = TRUE; // Start the L1S voice memo tone uplink task l1a_l1s_com.voicememo_task.record.tone_ul.start = TRUE; *state = WAIT_START_CON; } // End process return; } // omaps00090550 break; case WAIT_START_CON: { if (SignalCode == L1_VM_RECORD_START_CON) { // Reset the start command l1a_l1s_com.voicememo_task.record.tone_ul.start = FALSE; // Reset the start command l1a_l1s_com.voicememo_task.record.command.start = FALSE; // Send the start confirmation message l1a_audio_send_confirmation(MMI_VM_RECORD_START_CON); *state = WAIT_STOP; } // End process return; } // omaps00090550 break; case WAIT_STOP: { if (SignalCode == MMI_VM_RECORD_STOP_REQ) { // Stop the L1S voice memo recording task l1a_l1s_com.voicememo_task.record.command.stop = TRUE; // End process return; } else if (SignalCode == L1_VM_RECORD_STOP_CON) { // Forward the stop confirmation message l1a_audio_send_result(MMI_VM_RECORD_STOP_CON, msg, MMI_QUEUE); *state = RESET; } else { // End process return; } } break; } // switch } // while(1) } #endif // VOICE_MEMO #if (L1_PCM_EXTRACTION) #if (L1_DYN_DSP_DWNLD == 1) /*-------------------------------------------------------*/ /* l1a_mmi_pcm_download_process() */ /*-------------------------------------------------------*/ /* */ /* Description: */ /* ------------ */ /* This function is a state machine which handles the */ /* PCM download feature. */ /* */ /* Starting messages: MMI_PCM_DOWNLOAD_START_REQ */ /* */ /* Result messages (input): L1_PCM_DOWNLOAD_START_CON */ /* */ /* Result messages (output): MMI_PCM_DOWNLOAD_START_CON */ /* */ /* Reset messages (input): none */ /* */ /* Stop message (input): MMI_PCM_DOWNLOAD_STOP_REQ */ /* L1_PCM_DOWNLOAD_STOP_CON */ /* */ /* Stop message (output): MMI_PCM_DOWNLOAD_STOP_CON */ /* */ /* Rem: */ /* ---- */ /* */ /*-------------------------------------------------------*/ void l1a_mmi_pcm_download_process(xSignalHeaderRec *msg) { enum states { RESET = 0, WAIT_START_REQ = 1, WAIT_DYN_DWNLD = 2, WAIT_START_CON = 3, WAIT_STOP = 4 }; UWORD8 *state = &l1a.state[L1A_PCM_DOWNLOAD_STATE]; UWORD32 SignalCode = msg->SignalCode; BOOL end_process = 0; while(!end_process) { switch(*state) { case RESET: { // Reset the commands l1a_l1s_com.pcm_task.download.command.start = FALSE; l1a_l1s_com.pcm_task.download.command.stop = FALSE; *state = WAIT_START_REQ; } break; case WAIT_START_REQ: { if (SignalCode == MMI_PCM_DOWNLOAD_START_REQ) { // Download the parameters of the message to the l1a_l1s_com structure. l1a_l1s_com.pcm_task.download.parameters.session_id = ((T_MMI_PCM_DOWNLOAD_START_REQ *)(msg->SigP))->session_id; l1a_l1s_com.pcm_task.download.parameters.maximum_size = ((T_MMI_PCM_DOWNLOAD_START_REQ *)(msg->SigP))->maximum_size; l1s_dsp_com.dsp_ndb_ptr->d_pcm_api_download = ((((T_MMI_PCM_DOWNLOAD_START_REQ *)(msg->SigP))->download_ul_gain) << 1); l1s_dsp_com.dsp_ndb_ptr->d_pcm_api_download |= ((((T_MMI_PCM_DOWNLOAD_START_REQ *)(msg->SigP))->download_dl_gain) << 8); if (l1a.dyn_dwnld.semaphore_vect[PCM_EXTRACTION_STATE_MACHINE]==GREEN) { // Start the L1S PCM download task l1a_l1s_com.pcm_task.download.command.start = TRUE; *state = WAIT_START_CON; } else { *state = WAIT_DYN_DWNLD; #if ((TRACE_TYPE == 1) || (TRACE_TYPE == 4) || (TRACE_TYPE == 5)) if((trace_info.current_config->l1_dyn_trace) & (1<<L1_DYN_TRACE_DYN_DWNLD)) { char str[30]; sprintf(str,"PCM Extraction SM blocked\r\n"); #if(CODE_VERSION == SIMULATION) trace_fct_simu_dyn_dwnld(str); #else rvt_send_trace_cpy((T_RVT_BUFFER)str,trace_info.l1_trace_user_id,strlen(str),RVT_ASCII_FORMAT); #endif } #endif // (TRACE_TYPE == 1) || (TRACE_TYPE == 4) } } // End process end_process = 1; } break; case WAIT_DYN_DWNLD: { if((SignalCode==API_L1_DYN_DWNLD_FINISHED) && (l1a.dyn_dwnld.semaphore_vect[PCM_EXTRACTION_STATE_MACHINE] == GREEN)) { // Start the L1S PCM download task l1a_l1s_com.pcm_task.download.command.start = TRUE; *state = WAIT_START_CON; #if ((TRACE_TYPE == 1) || (TRACE_TYPE == 4) || (TRACE_TYPE == 5)) if((trace_info.current_config->l1_dyn_trace) & (1<<L1_DYN_TRACE_DYN_DWNLD)) { char str[32]; sprintf(str,"PCM Extraction SM un-blocked\r\n"); #if(CODE_VERSION == SIMULATION) trace_fct_simu_dyn_dwnld(str); #else rvt_send_trace_cpy((T_RVT_BUFFER)str,trace_info.l1_trace_user_id,strlen(str),RVT_ASCII_FORMAT); #endif } #endif // (TRACE_TYPE == 1) || (TRACE_TYPE == 4) } // End process end_process = 1; } break; case WAIT_START_CON: { if (SignalCode == L1_PCM_DOWNLOAD_START_CON) { // Reset the start command l1a_l1s_com.pcm_task.download.command.start = FALSE; // Send the start confirmation message l1a_audio_send_confirmation(MMI_PCM_DOWNLOAD_START_CON); *state = WAIT_STOP; } // End process end_process = 1; } break; case WAIT_STOP: { UWORD32 maximum_size; if (SignalCode == MMI_PCM_DOWNLOAD_STOP_REQ) { maximum_size = ((T_MMI_PCM_DOWNLOAD_STOP_REQ *)(msg->SigP))->maximum_size; if(maximum_size == 0) { // Stop the L1S PCM download task l1a_l1s_com.pcm_task.download.command.stop = TRUE; } else { l1a_l1s_com.pcm_task.download.parameters.maximum_size = maximum_size; } // End process return; } else if (SignalCode == L1_PCM_DOWNLOAD_STOP_CON) { // Send the stop confirmation message l1a_audio_send_confirmation(MMI_PCM_DOWNLOAD_STOP_CON); *state = RESET; } else { // End process return; } } break; } // switch } // while(!end_process) } /*-------------------------------------------------------*/ /* l1a_mmi_pcm_upload_process() */ /*-------------------------------------------------------*/ /* */ /* Description: */ /* ------------ */ /* This function is a state machine which handles the */ /* PCM upload feature. */ /* */ /* Starting messages: MMI_PCM_UPLOAD_START_REQ */ /* */ /* Result messages (input): L1_PCM_UPLOAD_START_CON */ /* */ /* Result messages (output): MMI_PCM_UPLOAD_START_CON */ /* */ /* Reset messages (input): none */ /* */ /* Stop message (input): MMI_PCM_UPLOAD_STOP_REQ */ /* L1_PCM_UPLOAD_STOP_CON */ /* */ /* Stop message (output): MMI_PCM_UPLOAD_STOP_CON */ /* */ /* Rem: */ /* ---- */ /* */ /*-------------------------------------------------------*/ void l1a_mmi_pcm_upload_process(xSignalHeaderRec *msg) { enum states { RESET = 0, WAIT_START_REQ = 1, WAIT_DYN_DWNLD = 2, WAIT_START_CON = 3, WAIT_STOP = 4 }; UWORD8 *state = &l1a.state[L1A_PCM_UPLOAD_STATE]; UWORD32 SignalCode = msg->SignalCode; BOOL end_process = 0; while(!end_process) { switch(*state) { case RESET: { // Reset the commands l1a_l1s_com.pcm_task.upload.command.start = FALSE; l1a_l1s_com.pcm_task.upload.command.stop = FALSE; *state = WAIT_START_REQ; } break; case WAIT_START_REQ: { if (SignalCode == MMI_PCM_UPLOAD_START_REQ) { // Download the parameters of the message to the l1a_l1s_com structure. l1a_l1s_com.pcm_task.upload.parameters.session_id = ((T_MMI_PCM_UPLOAD_START_REQ *)(msg->SigP))->session_id; l1a_l1s_com.pcm_task.upload.parameters.maximum_size = ((T_MMI_PCM_UPLOAD_START_REQ *)(msg->SigP))->maximum_size; l1s_dsp_com.dsp_ndb_ptr->d_pcm_api_upload = ((((T_MMI_PCM_UPLOAD_START_REQ *)(msg->SigP))->upload_ul_gain) << 1); l1s_dsp_com.dsp_ndb_ptr->d_pcm_api_upload |= ((((T_MMI_PCM_UPLOAD_START_REQ *)(msg->SigP))->upload_dl_gain) << 8); if (l1a.dyn_dwnld.semaphore_vect[PCM_EXTRACTION_STATE_MACHINE]==GREEN) { // Start the L1S PCM upload task l1a_l1s_com.pcm_task.upload.command.start = TRUE; *state = WAIT_START_CON; } else { *state = WAIT_DYN_DWNLD; #if ((TRACE_TYPE == 1) || (TRACE_TYPE == 4) || (TRACE_TYPE == 5)) if((trace_info.current_config->l1_dyn_trace) & (1<<L1_DYN_TRACE_DYN_DWNLD)) { char str[30]; sprintf(str,"PCM Extraction SM blocked\r\n"); #if(CODE_VERSION == SIMULATION) trace_fct_simu_dyn_dwnld(str); #else rvt_send_trace_cpy((T_RVT_BUFFER)str,trace_info.l1_trace_user_id,strlen(str),RVT_ASCII_FORMAT); #endif } #endif // (TRACE_TYPE == 1) || (TRACE_TYPE == 4) } } // End process end_process = 1; } break; case WAIT_DYN_DWNLD: { if((SignalCode==API_L1_DYN_DWNLD_FINISHED) && (l1a.dyn_dwnld.semaphore_vect[PCM_EXTRACTION_STATE_MACHINE] == GREEN)) { // Start the L1S PCM upload task l1a_l1s_com.pcm_task.upload.command.start = TRUE; *state = WAIT_START_CON; #if ((TRACE_TYPE == 1) || (TRACE_TYPE == 4) || (TRACE_TYPE == 5)) if((trace_info.current_config->l1_dyn_trace) & (1<<L1_DYN_TRACE_DYN_DWNLD)) { char str[32]; sprintf(str,"PCM Extraction SM un-blocked\r\n"); #if(CODE_VERSION == SIMULATION) trace_fct_simu_dyn_dwnld(str); #else rvt_send_trace_cpy((T_RVT_BUFFER)str,trace_info.l1_trace_user_id,strlen(str),RVT_ASCII_FORMAT); #endif } #endif // (TRACE_TYPE == 1) || (TRACE_TYPE == 4) } // End process end_process = 1; } break; case WAIT_START_CON: { if (SignalCode == L1_PCM_UPLOAD_START_CON) { // Reset the start command l1a_l1s_com.pcm_task.upload.command.start = FALSE; // Send the start confirmation message l1a_audio_send_confirmation(MMI_PCM_UPLOAD_START_CON); *state = WAIT_STOP; } // End process end_process = 1; } break; case WAIT_STOP: { if (SignalCode == MMI_PCM_UPLOAD_STOP_REQ) { // Stop the L1S PCM recording task l1a_l1s_com.pcm_task.upload.command.stop = TRUE; // End process return; } else if (SignalCode == L1_PCM_UPLOAD_STOP_CON) { // Forward the stop confirmation message l1a_audio_send_result(MMI_PCM_UPLOAD_STOP_CON, msg, MMI_QUEUE); *state = RESET; } else { // End process return; } } break; } // switch } // while(!end_process) } #else /*L1_DYN_DSP_DWNLD == 0 // l1a_mmi_pcm_download_process() // Description: // This function is a state machine which handles the */ // PCM download feature. // Starting messages: MMI_PCM_DOWNLOAD_START_REQ // Result messages (input): L1_PCM_DOWNLOAD_START_CON // Result messages (output): MMI_PCM_DOWNLOAD_START_CON // Reset messages (input): none // Stop message (input): MMI_PCM_DOWNLOAD_STOP_REQ //L1_PCM_DOWNLOAD_STOP_CON // Stop message (output): MMI_PCM_DOWNLOAD_STOP_CON */ //Rem: */ void l1a_mmi_pcm_download_process(xSignalHeaderRec *msg) { enum states { RESET = 0, WAIT_START_REQ = 1, WAIT_START_CON = 2, WAIT_STOP = 3 }; UWORD8 *state = &l1a.state[L1A_PCM_DOWNLOAD_STATE]; UWORD32 SignalCode = msg->SignalCode; BOOL end_process = 0; while(!end_process) { switch(*state) { case RESET: { // Reset the commands l1a_l1s_com.pcm_task.download.command.start = FALSE; l1a_l1s_com.pcm_task.download.command.stop = FALSE; *state = WAIT_START_REQ; } break; case WAIT_START_REQ: { if (SignalCode == MMI_PCM_DOWNLOAD_START_REQ) { // Download the parameters of the message to the l1a_l1s_com structure. l1a_l1s_com.pcm_task.download.parameters.session_id = ((T_MMI_PCM_DOWNLOAD_START_REQ *)(msg->SigP))->session_id; l1a_l1s_com.pcm_task.download.parameters.maximum_size = ((T_MMI_PCM_DOWNLOAD_START_REQ *)(msg->SigP))->maximum_size; l1s_dsp_com.dsp_ndb_ptr->d_pcm_api_download = ((((T_MMI_PCM_DOWNLOAD_START_REQ *)(msg->SigP))->download_ul_gain) << 1); l1s_dsp_com.dsp_ndb_ptr->d_pcm_api_download |= ((((T_MMI_PCM_DOWNLOAD_START_REQ *)(msg->SigP))->download_dl_gain) << 8); // Start the L1S PCM download task l1a_l1s_com.pcm_task.download.command.start = TRUE; *state = WAIT_START_CON; } // End process end_process = 1; } break; case WAIT_START_CON: { if (SignalCode == L1_PCM_DOWNLOAD_START_CON) { // Reset the start command l1a_l1s_com.pcm_task.download.command.start = FALSE; // Send the start confirmation message l1a_audio_send_confirmation(MMI_PCM_DOWNLOAD_START_CON); *state = WAIT_STOP; } // End process end_process = 1; } break; case WAIT_STOP: { UWORD32 maximum_size; if (SignalCode == MMI_PCM_DOWNLOAD_STOP_REQ) { maximum_size = ((T_MMI_PCM_DOWNLOAD_STOP_REQ *)(msg->SigP))->maximum_size; if(maximum_size == 0) { // Stop the L1S PCM download task l1a_l1s_com.pcm_task.download.command.stop = TRUE; } else { l1a_l1s_com.pcm_task.download.parameters.maximum_size = maximum_size; } // End process return; } else if (SignalCode == L1_PCM_DOWNLOAD_STOP_CON) { // Send the stop confirmation message l1a_audio_send_confirmation(MMI_PCM_DOWNLOAD_STOP_CON); *state = RESET; } else { // End process return; } } break; } // switch } // while(!end_process) } /*-------------------------------------------------------*/ /* l1a_mmi_pcm_upload_process() */ /*-------------------------------------------------------*/ /* */ /* Description: */ /* ------------ */ /* This function is a state machine which handles the */ /* PCM upload feature. */ /* */ /* Starting messages: MMI_PCM_UPLOAD_START_REQ */ /* */ /* Result messages (input): L1_PCM_UPLOAD_START_CON */ /* */ /* Result messages (output): MMI_PCM_UPLOAD_START_CON */ /* */ /* Reset messages (input): none */ /* */ /* Stop message (input): MMI_PCM_UPLOAD_STOP_REQ */ /* L1_PCM_UPLOAD_STOP_CON */ /* */ /* Stop message (output): MMI_PCM_UPLOAD_STOP_CON */ /* */ /* Rem: */ /* ---- */ /* */ /*-------------------------------------------------------*/ void l1a_mmi_pcm_upload_process(xSignalHeaderRec *msg) { enum states { RESET = 0, WAIT_START_REQ = 1, WAIT_START_CON = 2, WAIT_STOP = 3 }; UWORD8 *state = &l1a.state[L1A_PCM_UPLOAD_STATE]; UWORD32 SignalCode = msg->SignalCode; BOOL end_process = 0; while(!end_process) { switch(*state) { case RESET: { // Reset the commands l1a_l1s_com.pcm_task.upload.command.start = FALSE; l1a_l1s_com.pcm_task.upload.command.stop = FALSE; *state = WAIT_START_REQ; } break; case WAIT_START_REQ: { if (SignalCode == MMI_PCM_UPLOAD_START_REQ) { // Download the parameters of the message to the l1a_l1s_com structure. l1a_l1s_com.pcm_task.upload.parameters.session_id = ((T_MMI_PCM_UPLOAD_START_REQ *)(msg->SigP))->session_id; l1a_l1s_com.pcm_task.upload.parameters.maximum_size = ((T_MMI_PCM_UPLOAD_START_REQ *)(msg->SigP))->maximum_size; l1s_dsp_com.dsp_ndb_ptr->d_pcm_api_upload = ((((T_MMI_PCM_UPLOAD_START_REQ *)(msg->SigP))->upload_ul_gain) << 1); l1s_dsp_com.dsp_ndb_ptr->d_pcm_api_upload |= ((((T_MMI_PCM_UPLOAD_START_REQ *)(msg->SigP))->upload_dl_gain) << 8); // Start the L1S voice memo recording task l1a_l1s_com.pcm_task.upload.command.start = TRUE; *state = WAIT_START_CON; } // End process end_process = 1; } break; case WAIT_START_CON: { if (SignalCode == L1_PCM_UPLOAD_START_CON) { // Reset the start command l1a_l1s_com.pcm_task.upload.command.start = FALSE; // Send the start confirmation message l1a_audio_send_confirmation(MMI_PCM_UPLOAD_START_CON); *state = WAIT_STOP; } // End process end_process = 1; } break; case WAIT_STOP: { if (SignalCode == MMI_PCM_UPLOAD_STOP_REQ) { // Stop the L1S PCM recording task l1a_l1s_com.pcm_task.upload.command.stop = TRUE; // End process return; } else if (SignalCode == L1_PCM_UPLOAD_STOP_CON) { // Forward the stop confirmation message l1a_audio_send_result(MMI_PCM_UPLOAD_STOP_CON, msg, MMI_QUEUE); *state = RESET; } else { // End process return; } } break; } // switch } // while(!end_process) } #endif /* L1_DYN_DSP_DWNLD */ #endif /* L1_PCM_EXTRACTION */ #if (L1_VOICE_MEMO_AMR) #if (L1_DYN_DSP_DWNLD==1) /*-------------------------------------------------------*/ /* l1a_mmi_vm_amr_playing_process() */ /*-------------------------------------------------------*/ /* */ /* Description: */ /* ------------ */ /* This function is a state machine which handles the */ /* voice memorization playing feature. */ /* */ /* Starting messages: MMI_VM_AMR_PLAY_START_REQ */ /* */ /* Result messages (input): L1_VM_AMR_PLAY_START_CON */ /* */ /* Result messages (output): MMI_VM_AMR_PLAY_START_CON */ /* */ /* Reset messages (input): none */ /* */ /* Stop message (input): MMI_VM_AMR_PLAY_STOP_REQ */ /* L1_VM_AMR_PLAY_STOP_CON */ /* */ /* Stop message (output): MMI_VM_AMR_PLAY_STOP_CON */ /* */ /* Rem: */ /* ---- */ /* */ /*-------------------------------------------------------*/ void l1a_mmi_vm_amr_playing_process(xSignalHeaderRec *msg) { enum states { RESET = 0, WAIT_START_REQ = 1, WAIT_DYN_DWNLD = 2, WAIT_START_CON = 3, WAIT_STOP = 4 #if 0 /* FreeCalypso TCS211 reconstruction */ VM_AMR_PLAY = 5, VM_AMR_PAUSE = 6, VM_AMR_PAUSE_CON = 7, WAIT_RESUME_CON = 8 #endif }; UWORD8 *state = &l1a.state[L1A_VM_AMR_PLAY_STATE]; UWORD32 SignalCode = msg->SignalCode; while(1) { switch(*state) { case RESET: { // Reset the commands l1a_l1s_com.voicememo_amr_task.play.command.start = FALSE; l1a_l1s_com.voicememo_amr_task.play.command.stop = FALSE; #if 0 /* FreeCalypso TCS211 reconstruction */ l1a_l1s_com.voicememo_amr_task.play.command.pause = FALSE; l1a_l1s_com.voicememo_amr_task.play.command.resume = FALSE; #endif *state = WAIT_START_REQ; } break; case WAIT_START_REQ: { if(SignalCode == MMI_VM_AMR_PLAY_START_REQ) { // Download the parameters of the message to the l1a_l1s_com structure. l1a_l1s_com.voicememo_amr_task.play.parameters.session_id = ((T_MMI_VM_AMR_PLAY_REQ *)(msg->SigP))->session_id; if (l1a.dyn_dwnld.semaphore_vect[VOICE_PLAY_AMR_SM]==GREEN) { // WARNING: code below must be duplicated in WAIT_DYN_DWNLD state // Start the L1S voice memo playing task l1a_l1s_com.voicememo_amr_task.play.command.start = TRUE; *state = WAIT_START_CON; } else { *state = WAIT_DYN_DWNLD; #if ((TRACE_TYPE == 1) || (TRACE_TYPE == 4) || (TRACE_TYPE == 5)) if((trace_info.current_config->l1_dyn_trace) & (1<<L1_DYN_TRACE_DYN_DWNLD)) { char str[30]; sprintf(str,"VOICE PLAY AMR SM blocked\r\n"); #if(CODE_VERSION == SIMULATION) trace_fct_simu_dyn_dwnld(str); #else rvt_send_trace_cpy((T_RVT_BUFFER)str,trace_info.l1_trace_user_id,strlen(str),RVT_ASCII_FORMAT); #endif } #endif // (TRACE_TYPE == 1) || (TRACE_TYPE == 4) } } // End process return; } // omaps00090550 break; case WAIT_DYN_DWNLD: { if((SignalCode==API_L1_DYN_DWNLD_FINISHED) && (l1a.dyn_dwnld.semaphore_vect[VOICE_PLAY_AMR_SM] == GREEN)) { // Start the L1S voice memo playing task l1a_l1s_com.voicememo_amr_task.play.command.start = TRUE; *state = WAIT_START_CON; #if ((TRACE_TYPE == 1) || (TRACE_TYPE == 4) || (TRACE_TYPE == 5)) if((trace_info.current_config->l1_dyn_trace) & (1<<L1_DYN_TRACE_DYN_DWNLD)) { char str[32]; sprintf(str,"VOICE PLAY AMR SM un-blocked\r\n"); #if(CODE_VERSION == SIMULATION) trace_fct_simu_dyn_dwnld(str); #else rvt_send_trace_cpy((T_RVT_BUFFER)str,trace_info.l1_trace_user_id,strlen(str),RVT_ASCII_FORMAT); #endif } #endif // (TRACE_TYPE == 1) || (TRACE_TYPE == 4) } return; } // omaps00090550 break; case WAIT_START_CON: { if (SignalCode == L1_VM_AMR_PLAY_START_CON) { // Reset the start command l1a_l1s_com.voicememo_amr_task.play.command.start = FALSE; // Send the start confirmation message l1a_audio_send_confirmation(MMI_VM_AMR_PLAY_START_CON); *state = WAIT_STOP; } // End process return; } // omaps00090550 break; case WAIT_STOP: { if (SignalCode == MMI_VM_AMR_PLAY_STOP_REQ) { // Stop the L1S voice memo playing task l1a_l1s_com.voicememo_amr_task.play.command.stop = TRUE; // End process return; } else if (SignalCode == L1_VM_AMR_PLAY_STOP_CON) { // Send the stop confirmation message l1a_audio_send_confirmation(MMI_VM_AMR_PLAY_STOP_CON); *state = RESET; } else { // End process return; } } break; #if 0 /* FreeCalypso TCS211 reconstruction */ case VM_AMR_PLAY: { switch (SignalCode) { case MMI_VM_AMR_PAUSE_REQ: { // Stop the L1S voice memo playing task l1a_l1s_com.voicememo_amr_task.play.command.pause= TRUE; *state = VM_AMR_PAUSE_CON; } break; case MMI_VM_AMR_PLAY_STOP_REQ: { // Stop the L1S voice memo playing task l1a_l1s_com.voicememo_amr_task.play.command.stop = TRUE; *state=WAIT_STOP; } break; case L1_VM_AMR_PLAY_STOP_CON: { l1a_audio_send_confirmation(MMI_VM_AMR_PLAY_STOP_CON); *state = RESET; } break; } return; } case VM_AMR_PAUSE_CON: { if(SignalCode==L1_VM_AMR_PAUSE_CON) { // Send confirmation to upper layers l1a_audio_send_confirmation(MMI_VM_AMR_PAUSE_CON); // Change state *state=VM_AMR_PAUSE; } else if(SignalCode== L1_VM_AMR_PLAY_STOP_CON) { // Send the stop confirmation message l1a_audio_send_confirmation(MMI_VM_AMR_PLAY_STOP_CON); *state = RESET; } return; } // case WAIT_PAUSE_CON // ************* // * VM_AMR_PAUSE * // ************* case VM_AMR_PAUSE: { switch(SignalCode) { // * MMI requests VM_AMR resume * case MMI_VM_AMR_RESUME_REQ: { l1a_l1s_com.voicememo_amr_task.play.command.pause= FALSE; l1a_l1s_com.voicememo_amr_task.play.command.resume=TRUE; // Change state *state=WAIT_RESUME_CON; } break; // *-----------------------* // * MMI requests VM_AMR stop * // *-----------------------* case MMI_VM_AMR_PLAY_STOP_REQ: { // Store stop request in L1A/HISR interface l1a_l1s_com.voicememo_amr_task.play.command.stop=TRUE; // Change state *state=WAIT_STOP; } break; case L1_VM_AMR_PLAY_STOP_CON: { l1a_audio_send_confirmation(MMI_VM_AMR_PLAY_STOP_CON); *state = RESET; } break; } return; } // case VM_AMR_PAUSE // ******************* // * WAIT_RESUME_CON * // ******************* case WAIT_RESUME_CON: { if(SignalCode==L1_VM_AMR_RESUME_CON) { l1a_l1s_com.voicememo_amr_task.play.command.resume=FALSE; // Send confirmation to upper layers l1a_audio_send_confirmation(MMI_VM_AMR_RESUME_CON); // Change state *state=VM_AMR_PLAY; } return; } // case WAIT_RESUME_CON #endif } // switch } // while(1) } /*-------------------------------------------------------*/ /* l1a_mmi_vm_amr_recording_process() */ /*-------------------------------------------------------*/ /* */ /* Description: */ /* ------------ */ /* This function is a state machine which handles the */ /* voice memorization recording feature. */ /* */ /* Starting messages: MMI_VM_AMR_RECORD_START_REQ */ /* */ /* Result messages (input): L1_VM_AMR_RECORD_START_CON */ /* */ /* Result messages (output): MMI_VM_AMR_RECORD_START_CON */ /* */ /* Reset messages (input): none */ /* */ /* Stop message (input): MMI_VM_AMR_RECORD_STOP_REQ */ /* L1_VM_AMR_RECORD_STOP_CON */ /* */ /* Stop message (output): MMI_VM_AMR_RECORD_STOP_CON */ /* */ /* Rem: */ /* ---- */ /* */ /*-------------------------------------------------------*/ void l1a_mmi_vm_amr_recording_process(xSignalHeaderRec *msg) { enum states { RESET = 0, WAIT_START_REQ = 1, WAIT_DYN_DWNLD = 2, WAIT_START_CON = 3, WAIT_STOP = 4 }; UWORD8 *state = &l1a.state[L1A_VM_AMR_RECORD_STATE]; UWORD32 SignalCode = msg->SignalCode; while(1) { switch(*state) { case RESET: { // Reset the commands l1a_l1s_com.voicememo_amr_task.record.command.start = FALSE; l1a_l1s_com.voicememo_amr_task.record.command.stop = FALSE; *state = WAIT_START_REQ; } break; case WAIT_START_REQ: { if (SignalCode == MMI_VM_AMR_RECORD_START_REQ) { // Download the parameters of the message to the l1a_l1s_com structure. l1a_l1s_com.voicememo_amr_task.record.parameters.session_id = ((T_MMI_VM_AMR_RECORD_REQ *)(msg->SigP))->session_id; l1a_l1s_com.voicememo_amr_task.record.parameters.maximum_size = ((T_MMI_VM_AMR_RECORD_REQ *)(msg->SigP))->maximum_size; l1a_l1s_com.voicememo_amr_task.record.parameters.dtx = ((T_MMI_VM_AMR_RECORD_REQ *)(msg->SigP))->dtx_used; l1a_l1s_com.voicememo_amr_task.record.parameters.amr_vocoder = ((T_MMI_VM_AMR_RECORD_REQ *)(msg->SigP))->amr_vocoder; // Download UL/DL audio gain to the NDB l1s_dsp_com.dsp_ndb_ptr->d_shiftul = ((T_MMI_VM_AMR_RECORD_REQ *)(msg->SigP))->record_coeff_ul; if(l1a.dyn_dwnld.semaphore_vect[VOICE_MEMO_AMR_SM]==GREEN) { // WARNING: code below must be duplicated in WAIT_DYN_DWNLD state // Start the L1S voice memo recording task l1a_l1s_com.voicememo_amr_task.record.command.start = TRUE; *state = WAIT_START_CON; } else { *state = WAIT_DYN_DWNLD; #if ((TRACE_TYPE == 1) || (TRACE_TYPE == 4) || (TRACE_TYPE == 5)) if((trace_info.current_config->l1_dyn_trace) & (1<<L1_DYN_TRACE_DYN_DWNLD)) { char str[30]; sprintf(str,"VOICE MEMO AMR SM blocked \r\n"); #if(CODE_VERSION == SIMULATION) trace_fct_simu_dyn_dwnld(str); #else rvt_send_trace_cpy((T_RVT_BUFFER)str,trace_info.l1_trace_user_id,strlen(str),RVT_ASCII_FORMAT); #endif } #endif // (TRACE_TYPE == 1) || (TRACE_TYPE == 4) } } // End process return; } // omaps00090550 break; case WAIT_DYN_DWNLD: { if((SignalCode == API_L1_DYN_DWNLD_FINISHED) && (l1a.dyn_dwnld.semaphore_vect[VOICE_MEMO_AMR_SM] == GREEN)) { // Start the L1S voice memo recording task l1a_l1s_com.voicememo_amr_task.record.command.start = TRUE; *state = WAIT_START_CON; #if ((TRACE_TYPE == 1) || (TRACE_TYPE == 4) || (TRACE_TYPE == 5)) if((trace_info.current_config->l1_dyn_trace) & (1<<L1_DYN_TRACE_DYN_DWNLD)) { char str[32]; sprintf(str,"VOICE MEMO AMR SM un-blocked\r\n"); #if(CODE_VERSION == SIMULATION) trace_fct_simu_dyn_dwnld(str); #else rvt_send_trace_cpy((T_RVT_BUFFER)str,trace_info.l1_trace_user_id,strlen(str),RVT_ASCII_FORMAT); #endif } #endif // (TRACE_TYPE == 1) || (TRACE_TYPE == 4) } return; } // omaps00090550 break; case WAIT_START_CON: { if (SignalCode == L1_VM_AMR_RECORD_START_CON) { // Reset the start command l1a_l1s_com.voicememo_amr_task.record.command.start = FALSE; // Send the start confirmation message l1a_audio_send_confirmation(MMI_VM_AMR_RECORD_START_CON); *state = WAIT_STOP; } // End process return; } // omaps00090550 break; case WAIT_STOP: { if (SignalCode == MMI_VM_AMR_RECORD_STOP_REQ) { // Stop the L1S voice memo recording task l1a_l1s_com.voicememo_amr_task.record.command.stop = TRUE; // End process return; } else if (SignalCode == L1_VM_AMR_RECORD_STOP_CON) { // Forward the stop confirmation message l1a_audio_send_result(MMI_VM_AMR_RECORD_STOP_CON, msg, MMI_QUEUE); *state = RESET; } else { // End process return; } } break; } // switch } // while(1) } #else // L1_DYN_DSP_DWNLD = 0 /*-------------------------------------------------------*/ /* l1a_mmi_vm_amr_playing_process() */ /*-------------------------------------------------------*/ /* */ /* Description: */ /* ------------ */ /* This function is a state machine which handles the */ /* voice memorization playing feature. */ /* */ /* Starting messages: MMI_VM_AMR_PLAY_START_REQ */ /* */ /* Result messages (input): L1_VM_AMR_PLAY_START_CON */ /* */ /* Result messages (output): MMI_VM_AMR_PLAY_START_CON */ /* */ /* Reset messages (input): none */ /* */ /* Stop message (input): MMI_VM_AMR_PLAY_STOP_REQ */ /* L1_VM_AMR_PLAY_STOP_CON */ /* */ /* Stop message (output): MMI_VM_AMR_PLAY_STOP_CON */ /* */ /* Rem: */ /* ---- */ /* */ /*-------------------------------------------------------*/ void l1a_mmi_vm_amr_playing_process(xSignalHeaderRec *msg) { enum states { RESET = 0, WAIT_START_REQ = 1, WAIT_START_CON = 2, WAIT_STOP = 3, VM_AMR_PLAY = 4, VM_AMR_PAUSE = 5, VM_AMR_PAUSE_CON = 6, WAIT_RESUME_CON = 7 }; UWORD8 *state = &l1a.state[L1A_VM_AMR_PLAY_STATE]; UWORD32 SignalCode = msg->SignalCode; while(1) { switch(*state) { case RESET: { // Reset the commands l1a_l1s_com.voicememo_amr_task.play.command.start = FALSE; l1a_l1s_com.voicememo_amr_task.play.command.stop = FALSE; l1a_l1s_com.voicememo_amr_task.play.command.pause = FALSE; l1a_l1s_com.voicememo_amr_task.play.command.resume = FALSE; *state = WAIT_START_REQ; } break; case WAIT_START_REQ: { if (SignalCode == MMI_VM_AMR_PLAY_START_REQ) { // Download the parameters of the message to the l1a_l1s_com structure. l1a_l1s_com.voicememo_amr_task.play.parameters.session_id = ((T_MMI_VM_AMR_PLAY_REQ *)(msg->SigP))->session_id; // Start the L1S voice memo playing task l1a_l1s_com.voicememo_amr_task.play.command.start = TRUE; *state = WAIT_START_CON; } // End process return; } break; case WAIT_START_CON: { if (SignalCode == L1_VM_AMR_PLAY_START_CON) { // Reset the start command l1a_l1s_com.voicememo_amr_task.play.command.start = FALSE; // Send the start confirmation message l1a_audio_send_confirmation(MMI_VM_AMR_PLAY_START_CON); *state = VM_AMR_PLAY ; } // End process return; } break; case WAIT_STOP: { if (SignalCode == L1_VM_AMR_PLAY_STOP_CON) { // Send the stop confirmation message l1a_audio_send_confirmation(MMI_VM_AMR_PLAY_STOP_CON); *state = RESET; } else { // End process return; } } break; case VM_AMR_PLAY: { switch (SignalCode) { case MMI_VM_AMR_PAUSE_REQ: { // Stop the L1S voice memo playing task l1a_l1s_com.voicememo_amr_task.play.command.pause= TRUE; *state = VM_AMR_PAUSE_CON; } break; case MMI_VM_AMR_PLAY_STOP_REQ: { // Stop the L1S voice memo playing task l1a_l1s_com.voicememo_amr_task.play.command.stop = TRUE; *state=WAIT_STOP; } break; case L1_VM_AMR_PLAY_STOP_CON: { l1a_audio_send_confirmation(MMI_VM_AMR_PLAY_STOP_CON); *state = RESET; } break; } return; } case VM_AMR_PAUSE_CON: { if(SignalCode==L1_VM_AMR_PAUSE_CON) { // Send confirmation to upper layers l1a_audio_send_confirmation(MMI_VM_AMR_PAUSE_CON); // Change state *state=VM_AMR_PAUSE; } else if(SignalCode== L1_VM_AMR_PLAY_STOP_CON) { // Send the stop confirmation message l1a_audio_send_confirmation(MMI_VM_AMR_PLAY_STOP_CON); *state = RESET; } return; } // case WAIT_PAUSE_CON // ************* // * VM_AMR_PAUSE * // ************* case VM_AMR_PAUSE: { switch(SignalCode) { // * MMI requests VM_AMR resume * case MMI_VM_AMR_RESUME_REQ: { l1a_l1s_com.voicememo_amr_task.play.command.pause= FALSE; l1a_l1s_com.voicememo_amr_task.play.command.resume=TRUE; // Change state *state=WAIT_RESUME_CON; } break; // *-----------------------* // * MMI requests VM_AMR stop * // *-----------------------* case MMI_VM_AMR_PLAY_STOP_REQ: { // Store stop request in L1A/HISR interface l1a_l1s_com.voicememo_amr_task.play.command.stop=TRUE; // Change state *state=WAIT_STOP; } break; case L1_VM_AMR_PLAY_STOP_CON: { l1a_audio_send_confirmation(MMI_VM_AMR_PLAY_STOP_CON); *state = RESET; } break; } return; } // case VM_AMR_PAUSE // ******************* // * WAIT_RESUME_CON * // ******************* case WAIT_RESUME_CON: { if(SignalCode==L1_VM_AMR_RESUME_CON) { l1a_l1s_com.voicememo_amr_task.play.command.resume=FALSE; // Send confirmation to upper layers l1a_audio_send_confirmation(MMI_VM_AMR_RESUME_CON); // Change state *state=VM_AMR_PLAY; } return; } // case WAIT_RESUME_CON } // switch } // while(1) } /*-------------------------------------------------------*/ /* l1a_mmi_vm_amr_recording_process() */ /*-------------------------------------------------------*/ /* */ /* Description: */ /* ------------ */ /* This function is a state machine which handles the */ /* voice memorization recording feature. */ /* */ /* Starting messages: MMI_VM_AMR_RECORD_START_REQ */ /* */ /* Result messages (input): L1_VM_AMR_RECORD_START_CON */ /* */ /* Result messages (output): MMI_VM_AMR_RECORD_START_CON */ /* */ /* Reset messages (input): none */ /* */ /* Stop message (input): MMI_VM_AMR_RECORD_STOP_REQ */ /* L1_VM_AMR_RECORD_STOP_CON */ /* */ /* Stop message (output): MMI_VM_AMR_RECORD_STOP_CON */ /* */ /* Rem: */ /* ---- */ /* */ /*-------------------------------------------------------*/ void l1a_mmi_vm_amr_recording_process(xSignalHeaderRec *msg) { enum states { RESET = 0, WAIT_START_REQ = 1, WAIT_START_CON = 2, WAIT_STOP = 3 }; UWORD8 *state = &l1a.state[L1A_VM_AMR_RECORD_STATE]; UWORD32 SignalCode = msg->SignalCode; while(1) { switch(*state) { case RESET: { // Reset the commands l1a_l1s_com.voicememo_amr_task.record.command.start = FALSE; l1a_l1s_com.voicememo_amr_task.record.command.stop = FALSE; *state = WAIT_START_REQ; } break; case WAIT_START_REQ: { if (SignalCode == MMI_VM_AMR_RECORD_START_REQ) { // Download the parameters of the message to the l1a_l1s_com structure. l1a_l1s_com.voicememo_amr_task.record.parameters.session_id = ((T_MMI_VM_AMR_RECORD_REQ *)(msg->SigP))->session_id; l1a_l1s_com.voicememo_amr_task.record.parameters.maximum_size = ((T_MMI_VM_AMR_RECORD_REQ *)(msg->SigP))->maximum_size; l1a_l1s_com.voicememo_amr_task.record.parameters.dtx = ((T_MMI_VM_AMR_RECORD_REQ *)(msg->SigP))->dtx_used; l1a_l1s_com.voicememo_amr_task.record.parameters.amr_vocoder = ((T_MMI_VM_AMR_RECORD_REQ *)(msg->SigP))->amr_vocoder; // Download UL/DL audio gain to the NDB l1s_dsp_com.dsp_ndb_ptr->d_shiftul = ((T_MMI_VM_AMR_RECORD_REQ *)(msg->SigP))->record_coeff_ul; // Start the L1S voice memo recording task l1a_l1s_com.voicememo_amr_task.record.command.start = TRUE; *state = WAIT_START_CON; } // End process return; } break; case WAIT_START_CON: { if (SignalCode == L1_VM_AMR_RECORD_START_CON) { // Reset the start command l1a_l1s_com.voicememo_amr_task.record.command.start = FALSE; // Send the start confirmation message l1a_audio_send_confirmation(MMI_VM_AMR_RECORD_START_CON); *state = WAIT_STOP; } // End process return; } break; case WAIT_STOP: { if (SignalCode == MMI_VM_AMR_RECORD_STOP_REQ) { // Stop the L1S voice memo recording task l1a_l1s_com.voicememo_amr_task.record.command.stop = TRUE; // End process return; } else if (SignalCode == L1_VM_AMR_RECORD_STOP_CON) { // Forward the stop confirmation message l1a_audio_send_result(MMI_VM_AMR_RECORD_STOP_CON, msg, MMI_QUEUE); *state = RESET; } else { // End process return; } } break; } // switch } // while(1) } #endif // L1_DYN_DSP_DWNLD #endif // L1_VOICE_MEMO_AMR #if (SPEECH_RECO) #if(L1_DYN_DSP_DWNLD == 1) /*-------------------------------------------------------*/ /* l1a_mmi_sr_enroll_process() */ /*-------------------------------------------------------*/ /* */ /* Description: */ /* ------------ */ /* This function is a state machine which handles the */ /* speech recognition enrollment feature. */ /* */ /* Starting messages: MMI_SR_ENROLL_START_REQ */ /* */ /* Result messages (input): L1_SR_ENROLL_START_CON */ /* */ /* Result messages (output): MMI_SR_ENROLL_START_CON */ /* */ /* Reset messages (input): none */ /* */ /* Stop message (input): MMI_SR_ENROLL_STOP_REQ */ /* L1_SR_ENROLL_STOP_CON */ /* */ /* Stop message (output): MMI_SR_ENROLL_STOP_CON */ /* */ /* Rem: */ /* ---- */ /* */ /*-------------------------------------------------------*/ void l1a_mmi_sr_enroll_process(xSignalHeaderRec *msg) { enum states { RESET = 0, WAIT_START_REQ = 1, WAIT_DYN_DWNLD = 2, WAIT_START_CON = 3, WAIT_STOP = 4, WAIT_BACK_TASK_DONE = 5, WAIT_L1S_STOP = 6, WAIT_BACK_STOP = 7 }; UWORD8 *state = &l1a.state[L1A_SR_ENROLL_STATE]; UWORD32 SignalCode = msg->SignalCode; #if (OP_RIV_AUDIO == 1) void *p_message; T_RVF_MB_STATUS mb_status; #else xSignalHeaderRec *conf_msg; #endif while(1) { switch(*state) { case RESET: { // Reset the commands l1a_l1s_com.speechreco_task.command.enroll_start = FALSE; l1a_l1s_com.speechreco_task.command.enroll_stop = FALSE; l1a_l1s_com.speechreco_task.command.speech_start = FALSE; l1a_l1s_com.speechreco_task.command.speech_stop = FALSE; *state = WAIT_START_REQ; } break; case WAIT_START_REQ: { if (SignalCode == MMI_SR_ENROLL_START_REQ) { // Download the message parameters to the parameters memory l1a_l1s_com.speechreco_task.parameters.database_id = ((T_MMI_SR_ENROLL_REQ *)(msg->SigP))->database_id; l1a_l1s_com.speechreco_task.parameters.word_index = ((T_MMI_SR_ENROLL_REQ *)(msg->SigP))->word_index; l1a_l1s_com.speechreco_task.parameters.model_address = l1s_dsp_com.dsp_ndb_ptr->a_model; l1a_l1s_com.speechreco_task.parameters.speech = ((T_MMI_SR_ENROLL_REQ *)(msg->SigP))->speech; l1a_l1s_com.speechreco_task.parameters.speech_address = ((T_MMI_SR_ENROLL_REQ *)(msg->SigP))->speech_address; if(l1a.dyn_dwnld.semaphore_vect[SPEECH_RECO_SM]==GREEN) { // WARNING: code below must be duplicated in WAIT_DYN_DWNLD state // Set the start command of the speech recording task l1a_l1s_com.speechreco_task.command.speech_start = l1a_l1s_com.speechreco_task.parameters.speech; // Start the speech recognition enrollment task l1a_l1s_com.speechreco_task.command.enroll_start = TRUE; *state = WAIT_START_CON; } else { *state = WAIT_DYN_DWNLD; #if ((TRACE_TYPE == 1) || (TRACE_TYPE == 4) || (TRACE_TYPE == 5)) if((trace_info.current_config->l1_dyn_trace) & (1<<L1_DYN_TRACE_DYN_DWNLD)) { char str[30]; sprintf(str,"SPEECH RECO SM blocked\r\n"); #if(CODE_VERSION == SIMULATION) trace_fct_simu_dyn_dwnld(str); #else rvt_send_trace_cpy((T_RVT_BUFFER)str,trace_info.l1_trace_user_id,strlen(str),RVT_ASCII_FORMAT); #endif } #endif // (TRACE_TYPE == 1) || (TRACE_TYPE == 4) } } // End process return; } break; case WAIT_DYN_DWNLD: { if((SignalCode == API_L1_DYN_DWNLD_FINISHED) && (l1a.dyn_dwnld.semaphore_vect[SPEECH_RECO_SM] == GREEN)) { // Set the start command of the speech recording task l1a_l1s_com.speechreco_task.command.speech_start = l1a_l1s_com.speechreco_task.parameters.speech; // Start the speech recognition enrollment task l1a_l1s_com.speechreco_task.command.enroll_start = TRUE; *state = WAIT_START_CON; #if ((TRACE_TYPE == 1) || (TRACE_TYPE == 4) || (TRACE_TYPE == 5)) if((trace_info.current_config->l1_dyn_trace) & (1<<L1_DYN_TRACE_DYN_DWNLD)) { char str[30]; sprintf(str,"SPEECH RECO SM un-blocked\r\n"); #if(CODE_VERSION == SIMULATION) trace_fct_simu_dyn_dwnld(str); #else rvt_send_trace_cpy((T_RVT_BUFFER)str,trace_info.l1_trace_user_id,strlen(str),RVT_ASCII_FORMAT); #endif } #endif // (TRACE_TYPE == 1) || (TRACE_TYPE == 4) } return; } break; case WAIT_START_CON: { if (SignalCode == L1_SR_ENROLL_START_CON) { // Reset the commands l1a_l1s_com.speechreco_task.command.enroll_start = FALSE; l1a_l1s_com.speechreco_task.command.speech_start = FALSE; // Send the start confirmation message l1a_audio_send_confirmation(MMI_SR_ENROLL_START_CON); *state = WAIT_STOP; } // End process return; } break; case WAIT_STOP: { if (SignalCode == MMI_SR_ENROLL_STOP_REQ) { // Stop the speech recognition enroll task l1a_l1s_com.speechreco_task.command.enroll_stop = TRUE; // Stop the speech recording task (if present) l1a_l1s_com.speechreco_task.command.speech_stop = l1a_l1s_com.speechreco_task.parameters.speech; *state = WAIT_L1S_STOP; // End process return; } else if (SignalCode == L1_SR_ENROLL_STOP_CON) { // There is an error during the acquisition task? if ( ((T_L1_SR_ENROLL_STOP_CON *)(msg->SigP))->error_id == SC_NO_ERROR ) { // Reset the background task emergency stop l1_srback_com.emergency_stop = FALSE; // Send the message L1_SRBACK_SAVE_DATA_REQ to the background task l1_send_sr_background_msg(L1_SRBACK_SAVE_DATA_REQ); *state = WAIT_BACK_TASK_DONE; // End process return; } else // There is an error { // Forward the stop confirmation message l1a_audio_send_result(MMI_SR_ENROLL_STOP_CON, msg, MMI_QUEUE); *state = RESET; } } else { // End process return; } } break; case WAIT_BACK_TASK_DONE: { if (SignalCode == L1_SRBACK_SAVE_DATA_CON) { // Send the stop confirmation message with no error #if (OP_RIV_AUDIO == 1) // Allocate the Riviera buffer mb_status = rvf_get_buf ( p_audio_gbl_var->mb_internal, sizeof (T_MMI_SR_ENROLL_STOP_CON), (T_RVF_BUFFER **) (&p_message)); // If insufficient resources, then report a memory error and abort. if (mb_status == RVF_RED) { // the memory is insufficient to continue the non regression test AUDIO_SEND_TRACE("AUDIO entity has no memory for L1 confirm",RV_TRACE_LEVEL_ERROR); return; } // Fill the message ID ((T_MMI_SR_ENROLL_STOP_CON *)(p_message))->header.msg_id = MMI_SR_ENROLL_STOP_CON; // Fill the message parameter ((T_MMI_SR_ENROLL_STOP_CON *)(p_message))->error_id = SC_NO_ERROR; // send the messsage to the audio entity rvf_send_msg (p_audio_gbl_var->addrId, p_message); #else // OP_RIV_AUDIO // Allocate confirmation message... conf_msg = os_alloc_sig( sizeof(T_MMI_SR_ENROLL_STOP_CON) ); DEBUGMSG(status,NU_ALLOC_ERR) conf_msg->SignalCode = MMI_SR_ENROLL_STOP_CON; //Fill the message ((T_MMI_SR_ENROLL_STOP_CON *)(conf_msg->SigP))->error_id = SC_NO_ERROR; #if (TRACE_TYPE==1) || (TRACE_TYPE==4) l1_trace_message(conf_msg); #endif // Send the confirmation message... os_send_sig(conf_msg, MMI_QUEUE); DEBUGMSG(status,NU_SEND_QUEUE_ERR) #endif // OP_RIV_AUDIO *state = RESET; } else if (SignalCode == MMI_SR_ENROLL_STOP_REQ) { // Stop immediatly the background task l1_srback_com.emergency_stop = TRUE; *state = WAIT_BACK_STOP; // End process return; } else { // End process return; } } break; case WAIT_BACK_STOP: { if (SignalCode == L1_SRBACK_SAVE_DATA_CON) { // Send the message MMI_SR_ENROLL_STOP_CON with an acquisition error #if (OP_RIV_AUDIO == 1) // Allocate the Riviera buffer mb_status = rvf_get_buf ( p_audio_gbl_var->mb_internal, sizeof (T_MMI_SR_ENROLL_STOP_CON), (T_RVF_BUFFER **) (&p_message)); // If insufficient resources, then report a memory error and abort. if (mb_status == RVF_RED) { // the memory is insufficient to continue the non regression test AUDIO_SEND_TRACE("AUDIO entity has no memory for L1 confirm",RV_TRACE_LEVEL_ERROR); return; } // Fill the message ID ((T_MMI_SR_ENROLL_STOP_CON *)(p_message))->header.msg_id = MMI_SR_ENROLL_STOP_CON; // Fill the message parameter ((T_MMI_SR_ENROLL_STOP_CON *)(p_message))->error_id = SC_BAD_ACQUISITION; // send the messsage to the audio entity rvf_send_msg (p_audio_gbl_var->addrId, p_message); #else // OP_RIV_AUDIO // Allocate confirmation message... conf_msg = os_alloc_sig(sizeof(T_MMI_SR_ENROLL_STOP_CON)); DEBUGMSG(status,NU_ALLOC_ERR) conf_msg->SignalCode = MMI_SR_ENROLL_STOP_CON; //Fill the message ((T_MMI_SR_ENROLL_STOP_CON *)(conf_msg->SigP))->error_id = SC_BAD_ACQUISITION; #if (TRACE_TYPE==1) || (TRACE_TYPE==4) l1_trace_message(conf_msg); #endif // Send the confirmation message... os_send_sig(conf_msg, MMI_QUEUE); DEBUGMSG(status,NU_SEND_QUEUE_ERR) #endif // OP_RIV_AUDIO *state = RESET; } else { // End process return; } } break; case WAIT_L1S_STOP: { if (SignalCode == L1_SR_ENROLL_STOP_CON) { // Send the message MMI_SR_ENROLL_STOP_CON with an acquisition error #if (OP_RIV_AUDIO == 1) // Allocate the Riviera buffer mb_status = rvf_get_buf ( p_audio_gbl_var->mb_internal, sizeof (T_MMI_SR_ENROLL_STOP_CON), (T_RVF_BUFFER **) (&p_message)); // If insufficient resources, then report a memory error and abort. if (mb_status == RVF_RED) { // the memory is insufficient to continue the non regression test AUDIO_SEND_TRACE("AUDIO entity has no memory for L1 confirm",RV_TRACE_LEVEL_ERROR); return; } // Fill the message ID ((T_MMI_SR_ENROLL_STOP_CON *)(p_message))->header.msg_id = MMI_SR_ENROLL_STOP_CON; // Fill the message parameter ((T_MMI_SR_ENROLL_STOP_CON *)(p_message))->error_id = SC_BAD_ACQUISITION; // send the messsage to the audio entity rvf_send_msg (p_audio_gbl_var->addrId, p_message); #else // OP_RIV_AUDIO // Allocate confirmation message... conf_msg = os_alloc_sig(sizeof(T_MMI_SR_ENROLL_STOP_CON)); DEBUGMSG(status,NU_ALLOC_ERR) conf_msg->SignalCode = MMI_SR_ENROLL_STOP_CON; //Fill the message ((T_MMI_SR_ENROLL_STOP_CON *)(conf_msg->SigP))->error_id = SC_BAD_ACQUISITION; #if (TRACE_TYPE==1) || (TRACE_TYPE==4) l1_trace_message(conf_msg); #endif // Send the confirmation message... os_send_sig(conf_msg, MMI_QUEUE); DEBUGMSG(status,NU_SEND_QUEUE_ERR) #endif // OP_RIV_AUDIO *state = RESET; } else { // End process return; } } break; } // switch } // while(1) } /*-------------------------------------------------------*/ /* l1a_mmi_sr_update_process() */ /*-------------------------------------------------------*/ /* */ /* Description: */ /* ------------ */ /* This function is a state machine which handles the */ /* speech recognition update feature. */ /* */ /* Starting messages: MMI_SR_UPDATE_START_REQ */ /* */ /* Result messages (input): L1_SR_UPDATE_START_CON */ /* */ /* Result messages (output): MMI_SR_UPDATE_START_CON */ /* */ /* Reset messages (input): none */ /* */ /* Stop message (input): MMI_SR_UPDATE_STOP_REQ */ /* L1_SR_UPDATE_STOP_CON */ /* */ /* Stop message (output): MMI_SR_UPDATE_STOP_CON */ /* */ /* Rem: */ /* ---- */ /* */ /*-------------------------------------------------------*/ void l1a_mmi_sr_update_process(xSignalHeaderRec *msg) { enum states { RESET = 0, WAIT_START_REQ = 1, WAIT_DYN_DWNLD = 2, WAIT_MODEL_LOADED = 3, WAIT_START_CON = 4, WAIT_STOP = 5, WAIT_BACK_TASK_DONE = 6, WAIT_L1S_STOP = 7, WAIT_BACK_STOP = 8 }; UWORD8 *state = &l1a.state[L1A_SR_UPDATE_STATE]; UWORD32 SignalCode = msg->SignalCode; #if (OP_RIV_AUDIO == 1) void *p_message; T_RVF_MB_STATUS mb_status; #else xSignalHeaderRec *conf_msg; #endif while(1) { switch(*state) { case RESET: { // Reset the commands l1a_l1s_com.speechreco_task.command.update_start = FALSE; l1a_l1s_com.speechreco_task.command.update_stop = FALSE; l1a_l1s_com.speechreco_task.command.speech_start = FALSE; l1a_l1s_com.speechreco_task.command.speech_stop = FALSE; *state = WAIT_START_REQ; } break; case WAIT_START_REQ: { if (SignalCode == MMI_SR_UPDATE_START_REQ) { // Download the message parameters to the parameters memory l1a_l1s_com.speechreco_task.parameters.database_id = ((T_MMI_SR_UPDATE_REQ *)(msg->SigP))->database_id; l1a_l1s_com.speechreco_task.parameters.word_index = ((T_MMI_SR_UPDATE_REQ *)(msg->SigP))->word_index; l1a_l1s_com.speechreco_task.parameters.model_address = l1s_dsp_com.dsp_ndb_ptr->a_model; l1a_l1s_com.speechreco_task.parameters.speech = ((T_MMI_SR_UPDATE_REQ *)(msg->SigP))->speech; l1a_l1s_com.speechreco_task.parameters.speech_address = ((T_MMI_SR_UPDATE_REQ *)(msg->SigP))->speech_address; // Reset the background task emergency stop l1_srback_com.emergency_stop = FALSE; l1a_l1s_com.speechreco_task.parameters.CTO_algorithm = FALSE; if(l1a.dyn_dwnld.semaphore_vect[SPEECH_RECO_SM] == GREEN) { // WARNING: code below must be duplicated in WAIT_DYN_DWNLD state // Start to download the model to the API l1_send_sr_background_msg(L1_SRBACK_LOAD_MODEL_REQ); // Send the start confirmation message l1a_audio_send_confirmation(MMI_SR_UPDATE_START_CON); *state = WAIT_MODEL_LOADED; } else { *state = WAIT_DYN_DWNLD; #if ((TRACE_TYPE == 1) || (TRACE_TYPE == 4) || (TRACE_TYPE == 5)) if((trace_info.current_config->l1_dyn_trace) & (1<<L1_DYN_TRACE_DYN_DWNLD)) { char str[30]; sprintf(str,"SPEECH RECO SM blocked\r\n"); #if(CODE_VERSION == SIMULATION) trace_fct_simu_dyn_dwnld(str); #else rvt_send_trace_cpy((T_RVT_BUFFER)str,trace_info.l1_trace_user_id,strlen(str),RVT_ASCII_FORMAT); #endif } #endif // (TRACE_TYPE == 1) || (TRACE_TYPE == 4) } } // End process return; } break; case WAIT_DYN_DWNLD: { if((SignalCode == API_L1_DYN_DWNLD_FINISHED) && (l1a.dyn_dwnld.semaphore_vect[SPEECH_RECO_SM] == GREEN)) { // Start to download the model to the API l1_send_sr_background_msg(L1_SRBACK_LOAD_MODEL_REQ); // Send the start confirmation message l1a_audio_send_confirmation(MMI_SR_UPDATE_START_CON); *state = WAIT_MODEL_LOADED; #if ((TRACE_TYPE == 1) || (TRACE_TYPE == 4) || (TRACE_TYPE == 5)) if((trace_info.current_config->l1_dyn_trace) & (1<<L1_DYN_TRACE_DYN_DWNLD)) { char str[30]; sprintf(str,"SPEECH RECO SM un-blocked\r\n"); #if(CODE_VERSION == SIMULATION) trace_fct_simu_dyn_dwnld(str); #else rvt_send_trace_cpy((T_RVT_BUFFER)str,trace_info.l1_trace_user_id,strlen(str),RVT_ASCII_FORMAT); #endif } #endif // (TRACE_TYPE == 1) || (TRACE_TYPE == 4) } return; } break; case WAIT_MODEL_LOADED: { if (SignalCode == MMI_SR_UPDATE_STOP_REQ) { // Stop immediatly the background task l1_srback_com.emergency_stop = TRUE; *state = WAIT_BACK_STOP; } else if (SignalCode == L1_SRBACK_LOAD_MODEL_CON) { // Set the start command of the speech recording task l1a_l1s_com.speechreco_task.command.speech_start = l1a_l1s_com.speechreco_task.parameters.speech; // Start the speech recognition update task l1a_l1s_com.speechreco_task.command.update_start = TRUE; *state = WAIT_START_CON; } // End process return; } break; case WAIT_START_CON: { if (SignalCode == MMI_SR_UPDATE_STOP_REQ) { // Stop the speech recognition update task l1a_l1s_com.speechreco_task.command.update_stop = TRUE; // Stop the speech recording task (if present) l1a_l1s_com.speechreco_task.command.speech_stop = l1a_l1s_com.speechreco_task.parameters.speech; *state = WAIT_L1S_STOP; } else if (SignalCode == L1_SR_UPDATE_START_CON) { // Reset the commands l1a_l1s_com.speechreco_task.command.update_start = FALSE; l1a_l1s_com.speechreco_task.command.speech_start = FALSE; *state = WAIT_STOP; } // End process return; } break; case WAIT_STOP: { if (SignalCode == MMI_SR_UPDATE_STOP_REQ) { // Stop the speech recognition update task l1a_l1s_com.speechreco_task.command.update_stop = TRUE; // Stop the speech recording task (if present) l1a_l1s_com.speechreco_task.command.speech_stop = l1a_l1s_com.speechreco_task.parameters.speech; *state = WAIT_L1S_STOP; // End process return; } else if (SignalCode == L1_SR_UPDATE_STOP_CON) { // There is an error during the update task? if ( ((T_L1_SR_UPDATE_STOP_CON *)(msg->SigP))->error_id == SC_NO_ERROR ) { // Reset the background task emergency stop l1_srback_com.emergency_stop = FALSE; // Send the message L1_SRBACK_SAVE_DATA_REQ to the background task l1_send_sr_background_msg(L1_SRBACK_SAVE_DATA_REQ); *state = WAIT_BACK_TASK_DONE; // End process return; } else { // Forward the stop confirmation message l1a_audio_send_result(MMI_SR_UPDATE_STOP_CON, msg, MMI_QUEUE); *state = RESET; } } else { // End process return; } } break; case WAIT_BACK_TASK_DONE: { if (SignalCode == MMI_SR_UPDATE_STOP_REQ) { // Stop immediatly the background task l1_srback_com.emergency_stop = TRUE; *state = WAIT_BACK_STOP; } else if (SignalCode == L1_SRBACK_SAVE_DATA_CON) { // Send the message MMI_SR_UPDATE_STOP_CON with an acquisition error #if (OP_RIV_AUDIO == 1) // Allocate the Riviera buffer mb_status = rvf_get_buf ( p_audio_gbl_var->mb_internal, sizeof (T_MMI_SR_UPDATE_STOP_CON), (T_RVF_BUFFER **) (&p_message)); // If insufficient resources, then report a memory error and abort. if (mb_status == RVF_RED) { // the memory is insufficient to continue the non regression test AUDIO_SEND_TRACE("AUDIO entity has no memory for L1 confirm",RV_TRACE_LEVEL_ERROR); return; } // Fill the message ID ((T_MMI_SR_UPDATE_STOP_CON *)(p_message))->header.msg_id = MMI_SR_UPDATE_STOP_CON; // Fill the message parameter ((T_MMI_SR_UPDATE_STOP_CON *)(p_message))->error_id = SC_NO_ERROR; // send the messsage to the audio entity rvf_send_msg (p_audio_gbl_var->addrId, p_message); #else // OP_RIV_AUDIO // Allocate confirmation message... conf_msg = os_alloc_sig(sizeof(T_MMI_SR_UPDATE_STOP_CON)); DEBUGMSG(status,NU_ALLOC_ERR) conf_msg->SignalCode = MMI_SR_UPDATE_STOP_CON; //Fill the message ((T_MMI_SR_UPDATE_STOP_CON *)(conf_msg->SigP))->error_id = SC_NO_ERROR; #if (TRACE_TYPE==1) || (TRACE_TYPE==4) l1_trace_message(conf_msg); #endif // Send the confirmation message... os_send_sig(conf_msg, MMI_QUEUE); DEBUGMSG(status,NU_SEND_QUEUE_ERR) #endif // OP_RIV_AUDIO *state = RESET; } else { // End process return; } } break; case WAIT_BACK_STOP: { if ( (SignalCode == L1_SRBACK_SAVE_DATA_CON) || (SignalCode == L1_SRBACK_LOAD_MODEL_CON) ) { // Send the message MMI_SR_UPDATE_STOP_CON with an update error #if (OP_RIV_AUDIO == 1) // Allocate the Riviera buffer mb_status = rvf_get_buf ( p_audio_gbl_var->mb_internal, sizeof (T_MMI_SR_UPDATE_STOP_CON), (T_RVF_BUFFER **) (&p_message)); // If insufficient resources, then report a memory error and abort. if (mb_status == RVF_RED) { // the memory is insufficient to continue the non regression test AUDIO_SEND_TRACE("AUDIO entity has no memory for L1 confirm",RV_TRACE_LEVEL_ERROR); return; } // Fill the message ID ((T_MMI_SR_UPDATE_STOP_CON *)(p_message))->header.msg_id = MMI_SR_UPDATE_STOP_CON; // Fill the message parameter ((T_MMI_SR_UPDATE_STOP_CON *)(p_message))->error_id = SC_BAD_UPDATE; // send the messsage to the audio entity rvf_send_msg (p_audio_gbl_var->addrId, p_message); #else // OP_RIV_AUDIO // Allocate confirmation message... conf_msg = os_alloc_sig(sizeof(T_MMI_SR_UPDATE_STOP_CON)); DEBUGMSG(status,NU_ALLOC_ERR) conf_msg->SignalCode = MMI_SR_UPDATE_STOP_CON; //Fill the message ((T_MMI_SR_UPDATE_STOP_CON *)(conf_msg->SigP))->error_id = SC_BAD_UPDATE; #if (TRACE_TYPE==1) || (TRACE_TYPE==4) l1_trace_message(conf_msg); #endif // Send the confirmation message... os_send_sig(conf_msg, MMI_QUEUE); DEBUGMSG(status,NU_SEND_QUEUE_ERR) #endif // OP_RIV_AUDIO *state = RESET; } else { // End process return; } } break; case WAIT_L1S_STOP: { if (SignalCode == L1_SR_UPDATE_STOP_CON) { // Send the message MMI_SR_UPDATE_STOP_CON with an update error #if (OP_RIV_AUDIO == 1) // Allocate the Riviera buffer mb_status = rvf_get_buf ( p_audio_gbl_var->mb_internal, sizeof (T_MMI_SR_UPDATE_STOP_CON), (T_RVF_BUFFER **) (&p_message)); // If insufficient resources, then report a memory error and abort. if (mb_status == RVF_RED) { // the memory is insufficient to continue the non regression test AUDIO_SEND_TRACE("AUDIO entity has no memory for L1 confirm",RV_TRACE_LEVEL_ERROR); return; } // Fill the message ID ((T_MMI_SR_UPDATE_STOP_CON *)(p_message))->header.msg_id = MMI_SR_UPDATE_STOP_CON; // Fill the message parameter ((T_MMI_SR_UPDATE_STOP_CON *)(p_message))->error_id = SC_BAD_UPDATE; // send the messsage to the audio entity rvf_send_msg (p_audio_gbl_var->addrId, p_message); #else // OP_RIV_AUDIO // Allocate confirmation message... conf_msg = os_alloc_sig(sizeof(T_MMI_SR_UPDATE_STOP_CON)); DEBUGMSG(status,NU_ALLOC_ERR) conf_msg->SignalCode = MMI_SR_UPDATE_STOP_CON; //Fill the message ((T_MMI_SR_UPDATE_STOP_CON *)(conf_msg->SigP))->error_id = SC_BAD_UPDATE; #if (TRACE_TYPE==1) || (TRACE_TYPE==4) l1_trace_message(conf_msg); #endif // Send the confirmation message... os_send_sig(conf_msg, MMI_QUEUE); DEBUGMSG(status,NU_SEND_QUEUE_ERR) #endif // OP_RIV_AUDIO *state = RESET; } else { // End process return; } } break; } // switch } // while(1) } /*-------------------------------------------------------*/ /* l1a_mmi_sr_reco_process() */ /*-------------------------------------------------------*/ /* */ /* Description: */ /* ------------ */ /* This function is a state machine which handles the */ /* speech recognition reco feature. */ /* */ /* Starting messages: MMI_SR_RECO_START_REQ */ /* */ /* Result messages (input): L1_SR_RECO_START_CON */ /* */ /* Result messages (output): MMI_SR_RECO_START_CON */ /* */ /* Reset messages (input): none */ /* */ /* Stop message (input): MMI_SR_RECO_STOP_REQ */ /* L1_SR_RECO_STOP_IND */ /* */ /* Stop message (output): MMI_SR_RECO_STOP_CON */ /* */ /* Rem: */ /* ---- */ /* */ /*-------------------------------------------------------*/ void l1a_mmi_sr_reco_process(xSignalHeaderRec *msg) { enum states { RESET = 0, WAIT_START_REQ = 1, WAIT_DYN_DWNLD = 2, WAIT_RECO_START = 3, WAIT_RECO_STOP = 4, LOAD_MODEL = 5, WAIT_MODEL_LOADED = 6, WAIT_PROCESSING_STOP = 7, WAIT_L1S_STOP = 8, WAIT_BACK_STOP = 9 }; UWORD8 *state = &l1a.state[L1A_SR_RECO_STATE]; UWORD32 SignalCode = msg->SignalCode; #if (OP_RIV_AUDIO == 1) void *p_message; T_RVF_MB_STATUS mb_status; #else xSignalHeaderRec *conf_msg; #endif while(1) { switch(*state) { case RESET: { // Reset the commands l1a_l1s_com.speechreco_task.command.reco_start = FALSE; l1a_l1s_com.speechreco_task.command.reco_stop = FALSE; l1a_l1s_com.speechreco_task.command.processing_start = FALSE; l1a_l1s_com.speechreco_task.command.processing_stop = FALSE; *state = WAIT_START_REQ; } break; case WAIT_START_REQ: { if (SignalCode == MMI_SR_RECO_START_REQ) { // Reset the index counter l1a_l1s_com.speechreco_task.parameters.index_counter = 0; // Download the parameters to the l1a_l1s_com.speechreco_task.parameters memory l1a_l1s_com.speechreco_task.parameters.database_id = ((T_MMI_SR_RECO_REQ *)(msg->SigP))->database_id; l1a_l1s_com.speechreco_task.parameters.vocabulary_size = ((T_MMI_SR_RECO_REQ *)(msg->SigP))->vocabulary_size; l1a_l1s_com.speechreco_task.parameters.model_address = l1s_dsp_com.dsp_ndb_ptr->a_model; // The CTO algorithm must be used? if (l1a_l1s_com.speechreco_task.parameters.vocabulary_size <= SC_SR_MAX_WORDS_FOR_CTO) { // Enable the CTO algorithm l1a_l1s_com.speechreco_task.parameters.CTO_algorithm = TRUE; // Double the vocabulary size l1a_l1s_com.speechreco_task.parameters.vocabulary_size <<= 1; } else { // Disable the CTO algorithm l1a_l1s_com.speechreco_task.parameters.CTO_algorithm = FALSE; } if (l1a.dyn_dwnld.semaphore_vect[SPEECH_RECO_SM] == GREEN) { // WARNING: code below must be duplicated in WAIT_DYN_DWNLD state // Start the speech recognition reco task l1a_l1s_com.speechreco_task.command.reco_start = TRUE; *state = WAIT_RECO_START; } else { *state = WAIT_DYN_DWNLD; #if ((TRACE_TYPE == 1) || (TRACE_TYPE == 4) || (TRACE_TYPE == 5)) if((trace_info.current_config->l1_dyn_trace) & (1<<L1_DYN_TRACE_DYN_DWNLD)) { char str[30]; sprintf(str,"SPEECH RECO SM blocked\r\n"); #if(CODE_VERSION == SIMULATION) trace_fct_simu_dyn_dwnld(str); #else rvt_send_trace_cpy((T_RVT_BUFFER)str,trace_info.l1_trace_user_id,strlen(str),RVT_ASCII_FORMAT); #endif } #endif // (TRACE_TYPE == 1) || (TRACE_TYPE == 4) } } // End process return; } break; case WAIT_DYN_DWNLD: { if((SignalCode == API_L1_DYN_DWNLD_FINISHED) && (l1a.dyn_dwnld.semaphore_vect[SPEECH_RECO_SM] == GREEN)) { // Start the speech recognition reco task l1a_l1s_com.speechreco_task.command.reco_start = TRUE; *state = WAIT_RECO_START; #if ((TRACE_TYPE == 1) || (TRACE_TYPE == 4) || (TRACE_TYPE == 5)) if((trace_info.current_config->l1_dyn_trace) & (1<<L1_DYN_TRACE_DYN_DWNLD)) { char str[30]; sprintf(str,"SPEECH RECO SM un-blocked\r\n"); #if(CODE_VERSION == SIMULATION) trace_fct_simu_dyn_dwnld(str); #else rvt_send_trace_cpy((T_RVT_BUFFER)str,trace_info.l1_trace_user_id,strlen(str),RVT_ASCII_FORMAT); #endif } #endif // (TRACE_TYPE == 1) || (TRACE_TYPE == 4) } return; } break; case WAIT_RECO_START: { if (SignalCode == L1_SR_RECO_START_CON) { // Reset the start command l1a_l1s_com.speechreco_task.command.reco_start = FALSE; // Send the start confirmation message l1a_audio_send_confirmation(MMI_SR_RECO_START_CON); *state = WAIT_RECO_STOP; } // End process return; } break; case WAIT_RECO_STOP: { if (SignalCode == L1_SR_RECO_STOP_CON) { // The acqusition is good or not? if ( ((T_L1_SR_RECO_STOP_CON *)(msg->SigP))->error_id == SC_NO_ERROR ) { *state = LOAD_MODEL; } else { // Send the message MMI_SR_RECO_STOP_CON with an error #if (OP_RIV_AUDIO == 1) // Allocate the Riviera buffer mb_status = rvf_get_buf ( p_audio_gbl_var->mb_internal, sizeof (T_MMI_SR_RECO_STOP_CON), (T_RVF_BUFFER **) (&p_message)); // If insufficient resources, then report a memory error and abort. if (mb_status == RVF_RED) { // the memory is insufficient to continue the non regression test AUDIO_SEND_TRACE("AUDIO entity has no memory for L1 confirm",RV_TRACE_LEVEL_ERROR); return; } // Fill the message ID ((T_MMI_SR_RECO_STOP_CON *)(p_message))->header.msg_id = MMI_SR_RECO_STOP_CON; // Fill the message parameter ((T_MMI_SR_RECO_STOP_CON *)(p_message))->error_id = ((T_L1_SR_RECO_STOP_CON *)(msg->SigP))->error_id; // send the messsage to the audio entity rvf_send_msg (p_audio_gbl_var->addrId, p_message); #else // OP_RIV_AUDIO // Allocate confirmation message... conf_msg = os_alloc_sig(sizeof(T_MMI_SR_RECO_STOP_CON)); DEBUGMSG(status,NU_ALLOC_ERR) conf_msg->SignalCode = MMI_SR_RECO_STOP_CON; // File the message ((T_MMI_SR_RECO_STOP_CON *)(conf_msg->SigP))->error_id = ((T_L1_SR_RECO_STOP_CON *)(msg->SigP))->error_id; #if (TRACE_TYPE==1) || (TRACE_TYPE==4) l1_trace_message(conf_msg); #endif // Send the confirmation message... os_send_sig(conf_msg, MMI_QUEUE); DEBUGMSG(status,NU_SEND_QUEUE_ERR) #endif // OP_RIV_AUDIO *state = RESET; } } else if(SignalCode == MMI_SR_RECO_STOP_REQ) { // Stop the speech recognition task l1a_l1s_com.speechreco_task.command.reco_stop = TRUE; *state = WAIT_L1S_STOP; // End process return; } else { // End process return; } } break; case LOAD_MODEL: { // Initialize the background task stop command l1_srback_com.emergency_stop = FALSE; // Start to load the model to the API l1a_l1s_com.speechreco_task.parameters.word_index = l1a_l1s_com.speechreco_task.parameters.index_counter; l1_send_sr_background_msg(L1_SRBACK_LOAD_MODEL_REQ); // Increase the index counter l1a_l1s_com.speechreco_task.parameters.index_counter++; *state = WAIT_MODEL_LOADED; // End process return; } break; case WAIT_MODEL_LOADED: { if (SignalCode == L1_SRBACK_LOAD_MODEL_CON) { // Start the DSP processing task l1a_l1s_com.speechreco_task.command.processing_start = TRUE; *state = WAIT_PROCESSING_STOP; } else if (SignalCode == MMI_SR_RECO_STOP_REQ) { // Stop immediatly the background task l1_srback_com.emergency_stop = TRUE; *state = WAIT_BACK_STOP; } // End process return; } break; case WAIT_PROCESSING_STOP: { if (SignalCode == L1_SR_PROCESSING_STOP_CON) { // The processing phase is good or not? if ( ((T_L1_SR_PROCESSING_STOP_CON *)(msg->SigP))->error_id == SC_NO_ERROR ) { *state = LOAD_MODEL; } else { // Send the MMI_SR_RECO_STOP_CON message with an error #if (OP_RIV_AUDIO == 1) // Allocate the Riviera buffer mb_status = rvf_get_buf ( p_audio_gbl_var->mb_internal, sizeof (T_MMI_SR_RECO_STOP_CON), (T_RVF_BUFFER **) (&p_message)); // If insufficient resources, then report a memory error and abort. if (mb_status == RVF_RED) { // the memory is insufficient to continue the non regression test AUDIO_SEND_TRACE("AUDIO entity has no memory for L1 confirm",RV_TRACE_LEVEL_ERROR); return; } // Fill the message ID ((T_MMI_SR_RECO_STOP_CON *)(p_message))->header.msg_id = MMI_SR_RECO_STOP_CON; // Fill the message parameter ((T_MMI_SR_RECO_STOP_CON *)(p_message))->error_id = ((T_L1_SR_PROCESSING_STOP_CON *)(msg->SigP))->error_id; #else // OP_RIV_AUDIO // Allocate confirmation message... conf_msg = os_alloc_sig(sizeof(T_MMI_SR_RECO_STOP_CON)); DEBUGMSG(status,NU_ALLOC_ERR) conf_msg->SignalCode = MMI_SR_RECO_STOP_CON; // File the message ((T_MMI_SR_RECO_STOP_CON *)(conf_msg->SigP))->error_id = ((T_L1_SR_PROCESSING_STOP_CON *)(msg->SigP))->error_id; #if (TRACE_TYPE==1) || (TRACE_TYPE==4) l1_trace_message(conf_msg); #endif // Send the confirmation message... os_send_sig(conf_msg, MMI_QUEUE); DEBUGMSG(status,NU_SEND_QUEUE_ERR) #endif // OP_RIV_AUDIO *state = RESET; } } else if (SignalCode == L1_SR_RECO_STOP_IND) { // The CTO algorithm is used? if (l1a_l1s_com.speechreco_task.parameters.CTO_algorithm) { // There is an error during the recognition? if ( ((T_L1_SR_RECO_STOP_IND *)(msg->SigP))->error_id == SC_NO_ERROR ) { // The best word is odd? if ( ((T_L1_SR_RECO_STOP_IND *)(msg->SigP))->best_word_index & 0x01 ) { // Change the error to tSC_CTO_WORD ((T_L1_SR_RECO_STOP_IND *)(msg->SigP))->error_id = SC_CTO_WORD; } else { // Devided by 2 the 4 indexes of the best words in the message ((T_L1_SR_RECO_STOP_IND *)(msg->SigP))->best_word_index >>= 1; ((T_L1_SR_RECO_STOP_IND *)(msg->SigP))->second_best_word_index >>= 1; ((T_L1_SR_RECO_STOP_IND *)(msg->SigP))->third_best_word_index >>= 1; ((T_L1_SR_RECO_STOP_IND *)(msg->SigP))->fourth_best_word_index >>= 1; } } } // Forward the message in the MMI_SR_RECO_STOP_CON l1a_audio_send_result(MMI_SR_RECO_STOP_CON, msg, MMI_QUEUE); *state = RESET; } else if (SignalCode == MMI_SR_RECO_STOP_REQ) { // Stop the L1S processing task l1a_l1s_com.speechreco_task.command.processing_stop = TRUE; *state = WAIT_L1S_STOP; // end process return; } else { // end process return; } } break; case WAIT_L1S_STOP: { if ( (SignalCode == L1_SR_PROCESSING_STOP_CON) || (SignalCode == L1_SR_RECO_STOP_CON) || (SignalCode == L1_SR_RECO_STOP_IND) ) { // Send the message MMI_SR_RECO_STOP_CON with a bad recognition error #if (OP_RIV_AUDIO == 1) // Allocate the Riviera buffer mb_status = rvf_get_buf ( p_audio_gbl_var->mb_internal, sizeof (T_MMI_SR_RECO_STOP_CON), (T_RVF_BUFFER **) (&p_message)); // If insufficient resources, then report a memory error and abort. if (mb_status == RVF_RED) { // the memory is insufficient to continue the non regression test AUDIO_SEND_TRACE("AUDIO entity has no memory for L1 confirm",RV_TRACE_LEVEL_ERROR); return; } // Fill the message ID ((T_MMI_SR_RECO_STOP_CON *)(p_message))->header.msg_id = MMI_SR_RECO_STOP_CON; // Fill the message parameter ((T_MMI_SR_RECO_STOP_CON *)(p_message))->error_id = SC_BAD_RECOGNITION; // send the messsage to the audio entity rvf_send_msg (p_audio_gbl_var->addrId, p_message); #else // OP_RIV_AUDIO // Allocate confirmation message... conf_msg = os_alloc_sig(sizeof(T_MMI_SR_RECO_STOP_CON)); DEBUGMSG(status,NU_ALLOC_ERR) conf_msg->SignalCode = MMI_SR_RECO_STOP_CON; // File the message ((T_MMI_SR_RECO_STOP_CON *)(conf_msg->SigP))->error_id = SC_BAD_RECOGNITION; #if (TRACE_TYPE==1) || (TRACE_TYPE==4) l1_trace_message(conf_msg); #endif // Send the confirmation message... os_send_sig(conf_msg, MMI_QUEUE); DEBUGMSG(status,NU_SEND_QUEUE_ERR) #endif // OP_RIV_AUDIO *state = RESET; } else { // End process return; } } break; case WAIT_BACK_STOP: { if (SignalCode == L1_SRBACK_LOAD_MODEL_CON) { // Send the MMI_SR_RECO_STOP_CON with an bad recognition error #if (OP_RIV_AUDIO == 1) // Allocate the Riviera buffer mb_status = rvf_get_buf ( p_audio_gbl_var->mb_internal, sizeof (T_MMI_SR_RECO_STOP_CON), (T_RVF_BUFFER **) (&p_message)); // If insufficient resources, then report a memory error and abort. if (mb_status == RVF_RED) { // the memory is insufficient to continue the non regression test AUDIO_SEND_TRACE("AUDIO entity has no memory for L1 confirm",RV_TRACE_LEVEL_ERROR); return; } // Fill the message ID ((T_MMI_SR_RECO_STOP_CON *)(p_message))->header.msg_id = MMI_SR_RECO_STOP_CON; // Fill the message parameter ((T_MMI_SR_RECO_STOP_CON *)(p_message))->error_id = SC_BAD_RECOGNITION; // send the messsage to the audio entity rvf_send_msg (p_audio_gbl_var->addrId, p_message); #else // OP_RIV_AUDIO // Allocate confirmation message... conf_msg = os_alloc_sig(sizeof(T_MMI_SR_RECO_STOP_CON)); DEBUGMSG(status,NU_ALLOC_ERR) conf_msg->SignalCode = MMI_SR_RECO_STOP_CON; // Fill the message ((T_MMI_SR_RECO_STOP_CON *)(conf_msg->SigP))->error_id = SC_BAD_RECOGNITION; #if (TRACE_TYPE==1) || (TRACE_TYPE==4) l1_trace_message(conf_msg); #endif // Send the confirmation message... os_send_sig(conf_msg, MMI_QUEUE); DEBUGMSG(status,NU_SEND_QUEUE_ERR) #endif // OP_RIV_AUDIO *state = RESET; } else { // End process return; } } break; } // switch } // while(1) } /*---------------------------------------------------------*/ /* l1a_mmi_sr_update_check_process() */ /*---------------------------------------------------------*/ /* */ /* Description: */ /* ------------ */ /* This function is a state machine which handles the */ /* speech recognition update check feature. */ /* */ /* Starting messages: MMI_SR_UPDATE_CHECK_START_REQ */ /* */ /* Result messages (input): L1_SR_UPDATE_START_CON */ /* */ /* Result messages (output): MMI_SR_UPDATE_CHECK_START_CON */ /* */ /* Reset messages (input): none */ /* */ /* Stop message (input): MMI_SR_UPDATE_CHECK_STOP_REQ */ /* L1_SR_RECO_STOP_IND */ /* */ /* Stop message (output): MMI_SR_UPDATE_CHECK_STOP_CON */ /* */ /* Rem: */ /* ---- */ /* */ /*---------------------------------------------------------*/ void l1a_mmi_sr_update_check_process(xSignalHeaderRec *msg) { enum states { RESET = 0, WAIT_START_REQ = 1, WAIT_DYN_DWNLD = 2, WAIT_MODEL = 3, WAIT_UPDATE_START = 4, WAIT_UPDATE_STOP = 5, WAIT_TEMP_SAVE_DONE = 6, LOAD_MODEL = 7, WAIT_MODEL_LOADED = 8, WAIT_PROCESSING_STOP = 9, WAIT_SAVE_DONE = 10, WAIT_L1S_STOP = 11, WAIT_BACK_STOP = 12 }; UWORD8 *state = &l1a.state[L1A_SR_UPDATE_CHECK_STATE]; UWORD32 SignalCode = msg->SignalCode; #if (OP_RIV_AUDIO == 1) void *p_message; T_RVF_MB_STATUS mb_status; #define AUDIO_MSG (p_message) #else xSignalHeaderRec *conf_msg; #define AUDIO_MSG (conf_msg->SigP) #endif while(1) { switch(*state) { case RESET: { // Reset the commands l1a_l1s_com.speechreco_task.command.update_start = FALSE; l1a_l1s_com.speechreco_task.command.update_stop = FALSE; l1a_l1s_com.speechreco_task.command.speech_start = FALSE; l1a_l1s_com.speechreco_task.command.speech_stop = FALSE; *state = WAIT_START_REQ; } break; case WAIT_START_REQ: { if(SignalCode == MMI_SR_UPDATE_CHECK_START_REQ) { // Download the message parameters to the parameters memory l1a_l1s_com.speechreco_task.parameters.database_id = ((T_MMI_SR_UPDATE_CHECK_REQ *)(msg->SigP))->database_id; l1a_l1s_com.speechreco_task.parameters.word_index = ((T_MMI_SR_UPDATE_CHECK_REQ *)(msg->SigP))->word_index; l1a_l1s_com.speechreco_task.parameters.word_to_check = ((T_MMI_SR_UPDATE_CHECK_REQ *)(msg->SigP))->word_index; l1a_l1s_com.speechreco_task.parameters.model_address = l1s_dsp_com.dsp_ndb_ptr->a_model; l1a_l1s_com.speechreco_task.parameters.model_temp_address = ((T_MMI_SR_UPDATE_CHECK_REQ *)(msg->SigP))->model_address; l1a_l1s_com.speechreco_task.parameters.speech = ((T_MMI_SR_UPDATE_CHECK_REQ *)(msg->SigP))->speech; l1a_l1s_com.speechreco_task.parameters.speech_address = ((T_MMI_SR_UPDATE_CHECK_REQ *)(msg->SigP))->speech_address; l1a_l1s_com.speechreco_task.parameters.vocabulary_size = ((T_MMI_SR_UPDATE_CHECK_REQ *)(msg->SigP))->vocabulary_size; // Reset the background task emergency stop l1_srback_com.emergency_stop = FALSE; l1a_l1s_com.speechreco_task.parameters.CTO_algorithm = FALSE; if (l1a.dyn_dwnld.semaphore_vect[SPEECH_RECO_SM] == GREEN) { // WARNING: code below must be duplicated in WAIT_DYN_DWNLD state // Start to download the model to the API l1_send_sr_background_msg(L1_SRBACK_LOAD_MODEL_REQ); // Send the start confirmation message l1a_audio_send_confirmation(MMI_SR_UPDATE_CHECK_START_CON); *state = WAIT_MODEL; } else { *state = WAIT_DYN_DWNLD; #if ((TRACE_TYPE == 1) || (TRACE_TYPE == 4) || (TRACE_TYPE == 5)) if((trace_info.current_config->l1_dyn_trace) & (1<<L1_DYN_TRACE_DYN_DWNLD)) { char str[30]; sprintf(str,"SPEECH RECO SM blocked\r\n"); #if(CODE_VERSION == SIMULATION) trace_fct_simu_dyn_dwnld(str); #else rvt_send_trace_cpy((T_RVT_BUFFER)str,trace_info.l1_trace_user_id,strlen(str),RVT_ASCII_FORMAT); #endif } #endif // (TRACE_TYPE == 1) || (TRACE_TYPE == 4) } } // End process return; } break; case WAIT_DYN_DWNLD: { if((SignalCode == API_L1_DYN_DWNLD_FINISHED) && (l1a.dyn_dwnld.semaphore_vect[SPEECH_RECO_SM] == GREEN)) { // Start to download the model to the API l1_send_sr_background_msg(L1_SRBACK_LOAD_MODEL_REQ); // Send the start confirmation message l1a_audio_send_confirmation(MMI_SR_UPDATE_CHECK_START_CON); *state = WAIT_MODEL; #if ((TRACE_TYPE == 1) || (TRACE_TYPE == 4) || (TRACE_TYPE == 5)) if((trace_info.current_config->l1_dyn_trace) & (1<<L1_DYN_TRACE_DYN_DWNLD)) { char str[30]; sprintf(str,"SPEECH RECO SM un-blocked\r\n"); #if(CODE_VERSION == SIMULATION) trace_fct_simu_dyn_dwnld(str); #else rvt_send_trace_cpy((T_RVT_BUFFER)str,trace_info.l1_trace_user_id,strlen(str),RVT_ASCII_FORMAT); #endif } #endif // (TRACE_TYPE == 1) || (TRACE_TYPE == 4) } return; } break; case WAIT_MODEL: { if (SignalCode == MMI_SR_UPDATE_CHECK_STOP_REQ) { // Stop immediatly the background task l1_srback_com.emergency_stop = TRUE; *state = WAIT_BACK_STOP; } else if (SignalCode == L1_SRBACK_LOAD_MODEL_CON) { // Set the start command of the speech recording task l1a_l1s_com.speechreco_task.command.speech_start = l1a_l1s_com.speechreco_task.parameters.speech; // Start the speech recognition update task l1a_l1s_com.speechreco_task.command.update_start = TRUE; *state = WAIT_UPDATE_START; } // End process return; } break; case WAIT_UPDATE_START: { if (SignalCode == MMI_SR_UPDATE_CHECK_STOP_REQ) { // Stop the speech recognition update task l1a_l1s_com.speechreco_task.command.update_stop = TRUE; // Stop the speech recording task (if present) l1a_l1s_com.speechreco_task.command.speech_stop = l1a_l1s_com.speechreco_task.parameters.speech; *state = WAIT_L1S_STOP; } else if (SignalCode == L1_SR_UPDATE_START_CON) { // Reset the commands l1a_l1s_com.speechreco_task.command.update_start = FALSE; l1a_l1s_com.speechreco_task.command.speech_start = FALSE; *state = WAIT_UPDATE_STOP; } // End process return; } break; case WAIT_UPDATE_STOP: { if (SignalCode == MMI_SR_UPDATE_CHECK_STOP_REQ) { // Stop the speech recognition update task l1a_l1s_com.speechreco_task.command.update_stop = TRUE; // Stop the speech recording task (if present) l1a_l1s_com.speechreco_task.command.speech_stop = l1a_l1s_com.speechreco_task.parameters.speech; *state = WAIT_L1S_STOP; // End process return; } else if (SignalCode == L1_SR_UPDATE_STOP_CON) { // There is an error during the update task? if ( ((T_L1_SR_UPDATE_STOP_CON *)(msg->SigP))->error_id == SC_NO_ERROR ) { // Reset the background task emergency stop l1_srback_com.emergency_stop = FALSE; // Send the message L1_SRBACK_SAVE_DATA_REQ to the background task l1_send_sr_background_msg(L1_SRBACK_TEMP_SAVE_DATA_REQ); *state = WAIT_TEMP_SAVE_DONE; // End process return; } else { // Forward the stop confirmation message l1a_audio_send_result(MMI_SR_UPDATE_CHECK_STOP_CON, msg, MMI_QUEUE); *state = RESET; } } else { // End process return; } } break; case WAIT_TEMP_SAVE_DONE: { if (SignalCode == MMI_SR_UPDATE_CHECK_STOP_REQ) { // Stop immediatly the background task l1_srback_com.emergency_stop = TRUE; *state = WAIT_BACK_STOP; // End process return; } else if (SignalCode == L1_SRBACK_TEMP_SAVE_DATA_CON) { // Reset the command l1a_l1s_com.speechreco_task.command.processing_start = FALSE; l1a_l1s_com.speechreco_task.command.processing_stop = FALSE; // Reset the index counter l1a_l1s_com.speechreco_task.parameters.index_counter = 0; // The CTO algorithm must be used? if (l1a_l1s_com.speechreco_task.parameters.vocabulary_size <= SC_SR_MAX_WORDS_FOR_CTO) { // Enable the CTO algorithm l1a_l1s_com.speechreco_task.parameters.CTO_algorithm = TRUE; // Double the vocabulary size l1a_l1s_com.speechreco_task.parameters.vocabulary_size <<= 1; } else { // Disable the CTO algorithm l1a_l1s_com.speechreco_task.parameters.CTO_algorithm = FALSE; } *state = LOAD_MODEL; } else { // End process return; } } break; case LOAD_MODEL: { // Initialize the background task stop command l1_srback_com.emergency_stop = FALSE; // Start to load the model to the API l1a_l1s_com.speechreco_task.parameters.word_index = l1a_l1s_com.speechreco_task.parameters.index_counter; l1_send_sr_background_msg(L1_SRBACK_LOAD_MODEL_REQ); // Increase the index counter l1a_l1s_com.speechreco_task.parameters.index_counter++; *state = WAIT_MODEL_LOADED; // End process return; } break; case WAIT_MODEL_LOADED: { if (SignalCode == L1_SRBACK_LOAD_MODEL_CON) { // Start the DSP processing task l1a_l1s_com.speechreco_task.command.processing_start = TRUE; *state = WAIT_PROCESSING_STOP; } else if (SignalCode == MMI_SR_UPDATE_CHECK_STOP_REQ) { // Stop immediatly the background task l1_srback_com.emergency_stop = TRUE; *state = WAIT_BACK_STOP; } // End process return; } break; case WAIT_PROCESSING_STOP: { if (SignalCode == L1_SR_PROCESSING_STOP_CON) { // The processing phase is good or not? if ( ((T_L1_SR_PROCESSING_STOP_CON *)(msg->SigP))->error_id == SC_NO_ERROR ) { *state = LOAD_MODEL; } else { // Send the MMI_SR_UPDATE_CHECK_STOP_CON message with an error #if (OP_RIV_AUDIO == 1) // Allocate the Riviera buffer mb_status = rvf_get_buf ( p_audio_gbl_var->mb_internal, sizeof (T_MMI_SR_UPDATE_CHECK_STOP_CON), (T_RVF_BUFFER **) (&p_message)); // If insufficient resources, then report a memory error and abort. if (mb_status == RVF_RED) { // the memory is insufficient to continue the non regression test AUDIO_SEND_TRACE("AUDIO entity has no memory for L1 confirm",RV_TRACE_LEVEL_ERROR); return; } // Fill the message ID ((T_MMI_SR_UPDATE_CHECK_STOP_CON *)(p_message))->header.msg_id = MMI_SR_UPDATE_CHECK_STOP_CON; // Fill the message parameter ((T_MMI_SR_UPDATE_CHECK_STOP_CON *)(p_message))->error_id = ((T_L1_SR_PROCESSING_STOP_CON *)(msg->SigP))->error_id; // send the messsage to the audio entity rvf_send_msg (p_audio_gbl_var->addrId, p_message); #else // OP_RIV_AUDIO // Allocate confirmation message... conf_msg = os_alloc_sig(sizeof(T_MMI_SR_UPDATE_CHECK_STOP_CON)); DEBUGMSG(status,NU_ALLOC_ERR) conf_msg->SignalCode = MMI_SR_UPDATE_CHECK_STOP_CON; // File the message ((T_MMI_SR_UPDATE_CHECK_STOP_CON *)(conf_msg->SigP))->error_id = ((T_L1_SR_PROCESSING_STOP_CON *)(msg->SigP))->error_id; #if (TRACE_TYPE==1) || (TRACE_TYPE==4) l1_trace_message(conf_msg); #endif // Send the confirmation message... os_send_sig(conf_msg, MMI_QUEUE); DEBUGMSG(status,NU_SEND_QUEUE_ERR) #endif // OP_RIV_AUDIO *state = RESET; } } else if (SignalCode == L1_SR_RECO_STOP_IND) { // There is an error during the recognition? if ( ((T_L1_SR_RECO_STOP_IND *)(msg->SigP))->error_id == SC_NO_ERROR ) { // The CTO algorithm is used? if (l1a_l1s_com.speechreco_task.parameters.CTO_algorithm) { // The best word is odd? if ( ((T_L1_SR_RECO_STOP_IND *)(msg->SigP))->best_word_index & 0x01 ) { // Change the error to SC_CTO_WORD ((T_L1_SR_RECO_STOP_IND *)(msg->SigP))->error_id = SC_CTO_WORD; // Forward the message in the MMI_SR_RECO_STOP_CON l1a_audio_send_result(MMI_SR_UPDATE_CHECK_STOP_CON, msg, MMI_QUEUE); *state = RESET; // End process return; } else { // Devided by 2 the 4 indexes of the best words in the message ((T_L1_SR_RECO_STOP_IND *)(msg->SigP))->best_word_index >>= 1; ((T_L1_SR_RECO_STOP_IND *)(msg->SigP))->second_best_word_index >>= 1; ((T_L1_SR_RECO_STOP_IND *)(msg->SigP))->third_best_word_index >>= 1; ((T_L1_SR_RECO_STOP_IND *)(msg->SigP))->fourth_best_word_index >>= 1; } } // Is it the good word? if ( ((T_L1_SR_RECO_STOP_IND *)(msg->SigP))->best_word_index == l1a_l1s_com.speechreco_task.parameters.word_to_check ) { // Save the message informations in the l1a_l1s_com memory l1a_l1s_com.speechreco_task.parameters.best_word_index = ((T_L1_SR_RECO_STOP_IND *)(msg->SigP))->best_word_index; l1a_l1s_com.speechreco_task.parameters.best_word_score = ((T_L1_SR_RECO_STOP_IND *)(msg->SigP))->best_word_score; l1a_l1s_com.speechreco_task.parameters.second_best_word_index = ((T_L1_SR_RECO_STOP_IND *)(msg->SigP))->second_best_word_index; l1a_l1s_com.speechreco_task.parameters.second_best_word_score = ((T_L1_SR_RECO_STOP_IND *)(msg->SigP))->second_best_word_score; l1a_l1s_com.speechreco_task.parameters.third_best_word_index = ((T_L1_SR_RECO_STOP_IND *)(msg->SigP))->third_best_word_index; l1a_l1s_com.speechreco_task.parameters.third_best_word_score = ((T_L1_SR_RECO_STOP_IND *)(msg->SigP))->third_best_word_score; l1a_l1s_com.speechreco_task.parameters.fourth_best_word_index = ((T_L1_SR_RECO_STOP_IND *)(msg->SigP))->fourth_best_word_index; l1a_l1s_com.speechreco_task.parameters.fourth_best_word_score = ((T_L1_SR_RECO_STOP_IND *)(msg->SigP))->fourth_best_word_score; l1a_l1s_com.speechreco_task.parameters.d_sr_db_level = ((T_L1_SR_RECO_STOP_IND *)(msg->SigP))->d_sr_db_level; l1a_l1s_com.speechreco_task.parameters.d_sr_db_noise = ((T_L1_SR_RECO_STOP_IND *)(msg->SigP))->d_sr_db_noise; l1a_l1s_com.speechreco_task.parameters.d_sr_model_size = ((T_L1_SR_RECO_STOP_IND *)(msg->SigP))->d_sr_model_size; // Reset the stop background task l1_srback_com.emergency_stop = FALSE; // Start the background task to save the model in the database l1a_l1s_com.speechreco_task.parameters.word_index = l1a_l1s_com.speechreco_task.parameters.word_to_check; l1a_l1s_com.speechreco_task.parameters.model_address = l1a_l1s_com.speechreco_task.parameters.model_temp_address; l1_send_sr_background_msg(L1_SRBACK_SAVE_DATA_REQ); *state = WAIT_SAVE_DONE; // End process return; } else { // Change the error to SC_CHECK_ERROR ((T_L1_SR_RECO_STOP_IND *)(msg->SigP))->error_id = SC_CHECK_ERROR; } } // Forward the message in the MMI_SR_RECO_STOP_CON l1a_audio_send_result(MMI_SR_UPDATE_CHECK_STOP_CON, msg, MMI_QUEUE); *state = RESET; } else if (SignalCode == MMI_SR_UPDATE_CHECK_STOP_REQ) { // Stop the L1S processing task l1a_l1s_com.speechreco_task.command.processing_stop = TRUE; *state = WAIT_L1S_STOP; // end process return; } else { // end process return; } } break; case WAIT_SAVE_DONE: { if (SignalCode == MMI_SR_UPDATE_CHECK_STOP_REQ) { // Stop immediatly the background task l1_srback_com.emergency_stop = TRUE; *state = WAIT_BACK_STOP; // End process return; } else if (SignalCode == L1_SRBACK_SAVE_DATA_CON) { // Send the MMI_SR_UPDATE_CHECK_STOP_CON message with an error #if (OP_RIV_AUDIO == 1) // Allocate the Riviera buffer mb_status = rvf_get_buf ( p_audio_gbl_var->mb_internal, sizeof (T_MMI_SR_UPDATE_CHECK_STOP_CON), (T_RVF_BUFFER **) (&p_message)); // If insufficient resources, then report a memory error and abort. if (mb_status == RVF_RED) { // the memory is insufficient to continue the non regression test AUDIO_SEND_TRACE("AUDIO entity has no memory for L1 confirm",RV_TRACE_LEVEL_ERROR); return; } // Fill the message ID ((T_MMI_SR_UPDATE_CHECK_STOP_CON *)(p_message))->header.msg_id = MMI_SR_UPDATE_CHECK_STOP_CON; #else // OP_RIV_AUDIO // Allocate confirmation message... conf_msg = os_alloc_sig(sizeof(T_MMI_SR_UPDATE_CHECK_STOP_CON)); DEBUGMSG(status,NU_ALLOC_ERR) conf_msg->SignalCode = MMI_SR_UPDATE_CHECK_STOP_CON; #endif // OP_RIV_AUDIO // Fill the message parameter ((T_MMI_SR_UPDATE_CHECK_STOP_CON *)(AUDIO_MSG))->error_id = SC_NO_ERROR; ((T_MMI_SR_UPDATE_CHECK_STOP_CON *)(AUDIO_MSG))->best_word_index = l1a_l1s_com.speechreco_task.parameters.best_word_index; ((T_MMI_SR_UPDATE_CHECK_STOP_CON *)(AUDIO_MSG))->best_word_score = l1a_l1s_com.speechreco_task.parameters.best_word_score; ((T_MMI_SR_UPDATE_CHECK_STOP_CON *)(AUDIO_MSG))->second_best_word_index = l1a_l1s_com.speechreco_task.parameters.second_best_word_index; ((T_MMI_SR_UPDATE_CHECK_STOP_CON *)(AUDIO_MSG))->second_best_word_score = l1a_l1s_com.speechreco_task.parameters.second_best_word_score; ((T_MMI_SR_UPDATE_CHECK_STOP_CON *)(AUDIO_MSG))->third_best_word_index = l1a_l1s_com.speechreco_task.parameters.third_best_word_index; ((T_MMI_SR_UPDATE_CHECK_STOP_CON *)(AUDIO_MSG))->third_best_word_score = l1a_l1s_com.speechreco_task.parameters.third_best_word_score; ((T_MMI_SR_UPDATE_CHECK_STOP_CON *)(AUDIO_MSG))->fourth_best_word_index = l1a_l1s_com.speechreco_task.parameters.fourth_best_word_index; ((T_MMI_SR_UPDATE_CHECK_STOP_CON *)(AUDIO_MSG))->fourth_best_word_score = l1a_l1s_com.speechreco_task.parameters.fourth_best_word_score; ((T_MMI_SR_UPDATE_CHECK_STOP_CON *)(AUDIO_MSG))->d_sr_db_level = l1a_l1s_com.speechreco_task.parameters.d_sr_db_level; ((T_MMI_SR_UPDATE_CHECK_STOP_CON *)(AUDIO_MSG))->d_sr_db_noise = l1a_l1s_com.speechreco_task.parameters.d_sr_db_noise; ((T_MMI_SR_UPDATE_CHECK_STOP_CON *)(AUDIO_MSG))->d_sr_model_size = l1a_l1s_com.speechreco_task.parameters.d_sr_model_size; #if (OP_RIV_AUDIO == 1) // send the messsage to the audio entity rvf_send_msg (p_audio_gbl_var->addrId, p_message); #else // OP_RIV_AUDIO #if (TRACE_TYPE==1) || (TRACE_TYPE==4) l1_trace_message(conf_msg); #endif // Send the confirmation message... os_send_sig(conf_msg, MMI_QUEUE); DEBUGMSG(status,NU_SEND_QUEUE_ERR) #endif // OP_RIV_AUDIO *state = RESET; } else { // End process return; } } break; case WAIT_BACK_STOP: { if ( (SignalCode == L1_SRBACK_SAVE_DATA_CON) || (SignalCode == L1_SRBACK_LOAD_MODEL_CON) || (SignalCode == L1_SRBACK_TEMP_SAVE_DATA_CON) ) { // Send the message MMI_SR_UPDATE_STOP_CON with an update error #if (OP_RIV_AUDIO == 1) // Allocate the Riviera buffer mb_status = rvf_get_buf ( p_audio_gbl_var->mb_internal, sizeof (T_MMI_SR_UPDATE_CHECK_STOP_CON), (T_RVF_BUFFER **) (&p_message)); // If insufficient resources, then report a memory error and abort. if (mb_status == RVF_RED) { // the memory is insufficient to continue the non regression test AUDIO_SEND_TRACE("AUDIO entity has no memory for L1 confirm",RV_TRACE_LEVEL_ERROR); return; } // Fill the message ID ((T_MMI_SR_UPDATE_CHECK_STOP_CON *)(p_message))->header.msg_id = MMI_SR_UPDATE_CHECK_STOP_CON; // Fill the message parameter ((T_MMI_SR_UPDATE_CHECK_STOP_CON *)(p_message))->error_id = SC_CHECK_ERROR; // send the messsage to the audio entity rvf_send_msg (p_audio_gbl_var->addrId, p_message); #else // OP_RIV_AUDIO // Allocate confirmation message... conf_msg = os_alloc_sig(sizeof(T_MMI_SR_UPDATE_CHECK_STOP_CON)); DEBUGMSG(status,NU_ALLOC_ERR) conf_msg->SignalCode = MMI_SR_UPDATE_CHECK_STOP_CON; //Fill the message ((T_MMI_SR_UPDATE_CHECK_STOP_CON *)(conf_msg->SigP))->error_id = SC_CHECK_ERROR; #if (TRACE_TYPE==1) || (TRACE_TYPE==4) l1_trace_message(conf_msg); #endif // Send the confirmation message... os_send_sig(conf_msg, MMI_QUEUE); DEBUGMSG(status,NU_SEND_QUEUE_ERR) #endif // OP_RIV_AUDIO *state = RESET; } else { // End process return; } } break; case WAIT_L1S_STOP: { if ( (SignalCode == L1_SR_UPDATE_STOP_CON) || (SignalCode == L1_SR_PROCESSING_STOP_CON) || (SignalCode == L1_SR_RECO_STOP_CON) || (SignalCode == L1_SR_RECO_STOP_IND) ) { // Send the message MMI_SR_UPDATE_CHECK_STOP_CON with an update error #if (OP_RIV_AUDIO == 1) // Allocate the Riviera buffer mb_status = rvf_get_buf ( p_audio_gbl_var->mb_internal, sizeof (T_MMI_SR_UPDATE_CHECK_STOP_CON), (T_RVF_BUFFER **) (&p_message)); // If insufficient resources, then report a memory error and abort. if (mb_status == RVF_RED) { // the memory is insufficient to continue the non regression test AUDIO_SEND_TRACE("AUDIO entity has no memory for L1 confirm",RV_TRACE_LEVEL_ERROR); return; } // Fill the message ID ((T_MMI_SR_UPDATE_CHECK_STOP_CON *)(p_message))->header.msg_id = MMI_SR_UPDATE_CHECK_STOP_CON; // Fill the message parameter ((T_MMI_SR_UPDATE_CHECK_STOP_CON *)(p_message))->error_id = SC_CHECK_ERROR; // send the messsage to the audio entity rvf_send_msg (p_audio_gbl_var->addrId, p_message); #else // OP_RIV_AUDIO // Allocate confirmation message... conf_msg = os_alloc_sig(sizeof(T_MMI_SR_UPDATE_CHECK_STOP_CON)); DEBUGMSG(status,NU_ALLOC_ERR) conf_msg->SignalCode = MMI_SR_UPDATE_CHECK_STOP_CON; //Fill the message ((T_MMI_SR_UPDATE_CHECK_STOP_CON *)(conf_msg->SigP))->error_id = SC_CHECK_ERROR; #if (TRACE_TYPE==1) || (TRACE_TYPE==4) l1_trace_message(conf_msg); #endif // Send the confirmation message... os_send_sig(conf_msg, MMI_QUEUE); DEBUGMSG(status,NU_SEND_QUEUE_ERR) #endif // OP_RIV_AUDIO *state = RESET; } else { // End process return; } } break; } // switch } // while(1) // Undefine message pointer macro. #undef MSG_AUDIO } #else // L1_DYN_DSP_DWNLD = 0 /*-------------------------------------------------------*/ /* l1a_mmi_sr_enroll_process() */ /*-------------------------------------------------------*/ /* */ /* Description: */ /* ------------ */ /* This function is a state machine which handles the */ /* speech recognition enrollment feature. */ /* */ /* Starting messages: MMI_SR_ENROLL_START_REQ */ /* */ /* Result messages (input): L1_SR_ENROLL_START_CON */ /* */ /* Result messages (output): MMI_SR_ENROLL_START_CON */ /* */ /* Reset messages (input): none */ /* */ /* Stop message (input): MMI_SR_ENROLL_STOP_REQ */ /* L1_SR_ENROLL_STOP_CON */ /* */ /* Stop message (output): MMI_SR_ENROLL_STOP_CON */ /* */ /* Rem: */ /* ---- */ /* */ /*-------------------------------------------------------*/ void l1a_mmi_sr_enroll_process(xSignalHeaderRec *msg) { enum states { RESET = 0, WAIT_START_REQ = 1, WAIT_START_CON = 2, WAIT_STOP = 3, WAIT_BACK_TASK_DONE = 4, WAIT_L1S_STOP = 5, WAIT_BACK_STOP = 6 }; UWORD8 *state = &l1a.state[L1A_SR_ENROLL_STATE]; UWORD32 SignalCode = msg->SignalCode; #if (OP_RIV_AUDIO == 1) void *p_message; T_RVF_MB_STATUS mb_status; #else xSignalHeaderRec *conf_msg; #endif while(1) { switch(*state) { case RESET: { // Reset the commands l1a_l1s_com.speechreco_task.command.enroll_start = FALSE; l1a_l1s_com.speechreco_task.command.enroll_stop = FALSE; l1a_l1s_com.speechreco_task.command.speech_start = FALSE; l1a_l1s_com.speechreco_task.command.speech_stop = FALSE; *state = WAIT_START_REQ; } break; case WAIT_START_REQ: { if (SignalCode == MMI_SR_ENROLL_START_REQ) { // Download the message parameters to the parameters memory l1a_l1s_com.speechreco_task.parameters.database_id = ((T_MMI_SR_ENROLL_REQ *)(msg->SigP))->database_id; l1a_l1s_com.speechreco_task.parameters.word_index = ((T_MMI_SR_ENROLL_REQ *)(msg->SigP))->word_index; l1a_l1s_com.speechreco_task.parameters.model_address = l1s_dsp_com.dsp_ndb_ptr->a_model; l1a_l1s_com.speechreco_task.parameters.speech = ((T_MMI_SR_ENROLL_REQ *)(msg->SigP))->speech; l1a_l1s_com.speechreco_task.parameters.speech_address = ((T_MMI_SR_ENROLL_REQ *)(msg->SigP))->speech_address; // Set the start command of the speech recording task l1a_l1s_com.speechreco_task.command.speech_start = l1a_l1s_com.speechreco_task.parameters.speech; // Start the speech recognition enrollment task l1a_l1s_com.speechreco_task.command.enroll_start = TRUE; *state = WAIT_START_CON; } // End process return; } break; case WAIT_START_CON: { if (SignalCode == L1_SR_ENROLL_START_CON) { // Reset the commands l1a_l1s_com.speechreco_task.command.enroll_start = FALSE; l1a_l1s_com.speechreco_task.command.speech_start = FALSE; // Send the start confirmation message l1a_audio_send_confirmation(MMI_SR_ENROLL_START_CON); *state = WAIT_STOP; } // End process return; } break; case WAIT_STOP: { if (SignalCode == MMI_SR_ENROLL_STOP_REQ) { // Stop the speech recognition enroll task l1a_l1s_com.speechreco_task.command.enroll_stop = TRUE; // Stop the speech recording task (if present) l1a_l1s_com.speechreco_task.command.speech_stop = l1a_l1s_com.speechreco_task.parameters.speech; *state = WAIT_L1S_STOP; // End process return; } else if (SignalCode == L1_SR_ENROLL_STOP_CON) { // There is an error during the acquisition task? if ( ((T_L1_SR_ENROLL_STOP_CON *)(msg->SigP))->error_id == SC_NO_ERROR ) { // Reset the background task emergency stop l1_srback_com.emergency_stop = FALSE; // Send the message L1_SRBACK_SAVE_DATA_REQ to the background task l1_send_sr_background_msg(L1_SRBACK_SAVE_DATA_REQ); *state = WAIT_BACK_TASK_DONE; // End process return; } else // There is an error { // Forward the stop confirmation message l1a_audio_send_result(MMI_SR_ENROLL_STOP_CON, msg, MMI_QUEUE); *state = RESET; } } else { // End process return; } } break; case WAIT_BACK_TASK_DONE: { if (SignalCode == L1_SRBACK_SAVE_DATA_CON) { // Send the stop confirmation message with no error #if (OP_RIV_AUDIO == 1) // Allocate the Riviera buffer mb_status = rvf_get_buf ( p_audio_gbl_var->mb_internal, sizeof (T_MMI_SR_ENROLL_STOP_CON), (T_RVF_BUFFER **) (&p_message)); // If insufficient resources, then report a memory error and abort. if (mb_status == RVF_RED) { // the memory is insufficient to continue the non regression test AUDIO_SEND_TRACE("AUDIO entity has no memory for L1 confirm",RV_TRACE_LEVEL_ERROR); return; } // Fill the message ID ((T_MMI_SR_ENROLL_STOP_CON *)(p_message))->header.msg_id = MMI_SR_ENROLL_STOP_CON; // Fill the message parameter ((T_MMI_SR_ENROLL_STOP_CON *)(p_message))->error_id = SC_NO_ERROR; // send the messsage to the audio entity rvf_send_msg (p_audio_gbl_var->addrId, p_message); #else // OP_RIV_AUDIO // Allocate confirmation message... conf_msg = os_alloc_sig( sizeof(T_MMI_SR_ENROLL_STOP_CON) ); DEBUGMSG(status,NU_ALLOC_ERR) conf_msg->SignalCode = MMI_SR_ENROLL_STOP_CON; //Fill the message ((T_MMI_SR_ENROLL_STOP_CON *)(conf_msg->SigP))->error_id = SC_NO_ERROR; #if (TRACE_TYPE==1) || (TRACE_TYPE==4) l1_trace_message(conf_msg); #endif // Send the confirmation message... os_send_sig(conf_msg, MMI_QUEUE); DEBUGMSG(status,NU_SEND_QUEUE_ERR) #endif // OP_RIV_AUDIO *state = RESET; } else if (SignalCode == MMI_SR_ENROLL_STOP_REQ) { // Stop immediatly the background task l1_srback_com.emergency_stop = TRUE; *state = WAIT_BACK_STOP; // End process return; } else { // End process return; } } break; case WAIT_BACK_STOP: { if (SignalCode == L1_SRBACK_SAVE_DATA_CON) { // Send the message MMI_SR_ENROLL_STOP_CON with an acquisition error #if (OP_RIV_AUDIO == 1) // Allocate the Riviera buffer mb_status = rvf_get_buf ( p_audio_gbl_var->mb_internal, sizeof (T_MMI_SR_ENROLL_STOP_CON), (T_RVF_BUFFER **) (&p_message)); // If insufficient resources, then report a memory error and abort. if (mb_status == RVF_RED) { // the memory is insufficient to continue the non regression test AUDIO_SEND_TRACE("AUDIO entity has no memory for L1 confirm",RV_TRACE_LEVEL_ERROR); return; } // Fill the message ID ((T_MMI_SR_ENROLL_STOP_CON *)(p_message))->header.msg_id = MMI_SR_ENROLL_STOP_CON; // Fill the message parameter ((T_MMI_SR_ENROLL_STOP_CON *)(p_message))->error_id = SC_BAD_ACQUISITION; // send the messsage to the audio entity rvf_send_msg (p_audio_gbl_var->addrId, p_message); #else // OP_RIV_AUDIO // Allocate confirmation message... conf_msg = os_alloc_sig(sizeof(T_MMI_SR_ENROLL_STOP_CON)); DEBUGMSG(status,NU_ALLOC_ERR) conf_msg->SignalCode = MMI_SR_ENROLL_STOP_CON; //Fill the message ((T_MMI_SR_ENROLL_STOP_CON *)(conf_msg->SigP))->error_id = SC_BAD_ACQUISITION; #if (TRACE_TYPE==1) || (TRACE_TYPE==4) l1_trace_message(conf_msg); #endif // Send the confirmation message... os_send_sig(conf_msg, MMI_QUEUE); DEBUGMSG(status,NU_SEND_QUEUE_ERR) #endif // OP_RIV_AUDIO *state = RESET; } else { // End process return; } } break; case WAIT_L1S_STOP: { if (SignalCode == L1_SR_ENROLL_STOP_CON) { // Send the message MMI_SR_ENROLL_STOP_CON with an acquisition error #if (OP_RIV_AUDIO == 1) // Allocate the Riviera buffer mb_status = rvf_get_buf ( p_audio_gbl_var->mb_internal, sizeof (T_MMI_SR_ENROLL_STOP_CON), (T_RVF_BUFFER **) (&p_message)); // If insufficient resources, then report a memory error and abort. if (mb_status == RVF_RED) { // the memory is insufficient to continue the non regression test AUDIO_SEND_TRACE("AUDIO entity has no memory for L1 confirm",RV_TRACE_LEVEL_ERROR); return; } // Fill the message ID ((T_MMI_SR_ENROLL_STOP_CON *)(p_message))->header.msg_id = MMI_SR_ENROLL_STOP_CON; // Fill the message parameter ((T_MMI_SR_ENROLL_STOP_CON *)(p_message))->error_id = SC_BAD_ACQUISITION; // send the messsage to the audio entity rvf_send_msg (p_audio_gbl_var->addrId, p_message); #else // OP_RIV_AUDIO // Allocate confirmation message... conf_msg = os_alloc_sig(sizeof(T_MMI_SR_ENROLL_STOP_CON)); DEBUGMSG(status,NU_ALLOC_ERR) conf_msg->SignalCode = MMI_SR_ENROLL_STOP_CON; //Fill the message ((T_MMI_SR_ENROLL_STOP_CON *)(conf_msg->SigP))->error_id = SC_BAD_ACQUISITION; #if (TRACE_TYPE==1) || (TRACE_TYPE==4) l1_trace_message(conf_msg); #endif // Send the confirmation message... os_send_sig(conf_msg, MMI_QUEUE); DEBUGMSG(status,NU_SEND_QUEUE_ERR) #endif // OP_RIV_AUDIO *state = RESET; } else { // End process return; } } break; } // switch } // while(1) } /*-------------------------------------------------------*/ /* l1a_mmi_sr_update_process() */ /*-------------------------------------------------------*/ /* */ /* Description: */ /* ------------ */ /* This function is a state machine which handles the */ /* speech recognition update feature. */ /* */ /* Starting messages: MMI_SR_UPDATE_START_REQ */ /* */ /* Result messages (input): L1_SR_UPDATE_START_CON */ /* */ /* Result messages (output): MMI_SR_UPDATE_START_CON */ /* */ /* Reset messages (input): none */ /* */ /* Stop message (input): MMI_SR_UPDATE_STOP_REQ */ /* L1_SR_UPDATE_STOP_CON */ /* */ /* Stop message (output): MMI_SR_UPDATE_STOP_CON */ /* */ /* Rem: */ /* ---- */ /* */ /*-------------------------------------------------------*/ void l1a_mmi_sr_update_process(xSignalHeaderRec *msg) { enum states { RESET = 0, WAIT_START_REQ = 1, WAIT_MODEL_LOADED = 2, WAIT_START_CON = 3, WAIT_STOP = 4, WAIT_BACK_TASK_DONE = 5, WAIT_L1S_STOP = 6, WAIT_BACK_STOP = 7 }; UWORD8 *state = &l1a.state[L1A_SR_UPDATE_STATE]; UWORD32 SignalCode = msg->SignalCode; #if (OP_RIV_AUDIO == 1) void *p_message; T_RVF_MB_STATUS mb_status; #else xSignalHeaderRec *conf_msg; #endif while(1) { switch(*state) { case RESET: { // Reset the commands l1a_l1s_com.speechreco_task.command.update_start = FALSE; l1a_l1s_com.speechreco_task.command.update_stop = FALSE; l1a_l1s_com.speechreco_task.command.speech_start = FALSE; l1a_l1s_com.speechreco_task.command.speech_stop = FALSE; *state = WAIT_START_REQ; } break; case WAIT_START_REQ: { if (SignalCode == MMI_SR_UPDATE_START_REQ) { // Download the message parameters to the parameters memory l1a_l1s_com.speechreco_task.parameters.database_id = ((T_MMI_SR_UPDATE_REQ *)(msg->SigP))->database_id; l1a_l1s_com.speechreco_task.parameters.word_index = ((T_MMI_SR_UPDATE_REQ *)(msg->SigP))->word_index; l1a_l1s_com.speechreco_task.parameters.model_address = l1s_dsp_com.dsp_ndb_ptr->a_model; l1a_l1s_com.speechreco_task.parameters.speech = ((T_MMI_SR_UPDATE_REQ *)(msg->SigP))->speech; l1a_l1s_com.speechreco_task.parameters.speech_address = ((T_MMI_SR_UPDATE_REQ *)(msg->SigP))->speech_address; // Reset the background task emergency stop l1_srback_com.emergency_stop = FALSE; // Start to download the model to the API l1a_l1s_com.speechreco_task.parameters.CTO_algorithm = FALSE; l1_send_sr_background_msg(L1_SRBACK_LOAD_MODEL_REQ); // Send the start confirmation message l1a_audio_send_confirmation(MMI_SR_UPDATE_START_CON); *state = WAIT_MODEL_LOADED; } // End process return; } break; case WAIT_MODEL_LOADED: { if (SignalCode == MMI_SR_UPDATE_STOP_REQ) { // Stop immediatly the background task l1_srback_com.emergency_stop = TRUE; *state = WAIT_BACK_STOP; } else if (SignalCode == L1_SRBACK_LOAD_MODEL_CON) { // Set the start command of the speech recording task l1a_l1s_com.speechreco_task.command.speech_start = l1a_l1s_com.speechreco_task.parameters.speech; // Start the speech recognition update task l1a_l1s_com.speechreco_task.command.update_start = TRUE; *state = WAIT_START_CON; } // End process return; } break; case WAIT_START_CON: { if (SignalCode == MMI_SR_UPDATE_STOP_REQ) { // Stop the speech recognition update task l1a_l1s_com.speechreco_task.command.update_stop = TRUE; // Stop the speech recording task (if present) l1a_l1s_com.speechreco_task.command.speech_stop = l1a_l1s_com.speechreco_task.parameters.speech; *state = WAIT_L1S_STOP; } else if (SignalCode == L1_SR_UPDATE_START_CON) { // Reset the commands l1a_l1s_com.speechreco_task.command.update_start = FALSE; l1a_l1s_com.speechreco_task.command.speech_start = FALSE; *state = WAIT_STOP; } // End process return; } break; case WAIT_STOP: { if (SignalCode == MMI_SR_UPDATE_STOP_REQ) { // Stop the speech recognition update task l1a_l1s_com.speechreco_task.command.update_stop = TRUE; // Stop the speech recording task (if present) l1a_l1s_com.speechreco_task.command.speech_stop = l1a_l1s_com.speechreco_task.parameters.speech; *state = WAIT_L1S_STOP; // End process return; } else if (SignalCode == L1_SR_UPDATE_STOP_CON) { // There is an error during the update task? if ( ((T_L1_SR_UPDATE_STOP_CON *)(msg->SigP))->error_id == SC_NO_ERROR ) { // Reset the background task emergency stop l1_srback_com.emergency_stop = FALSE; // Send the message L1_SRBACK_SAVE_DATA_REQ to the background task l1_send_sr_background_msg(L1_SRBACK_SAVE_DATA_REQ); *state = WAIT_BACK_TASK_DONE; // End process return; } else { // Forward the stop confirmation message l1a_audio_send_result(MMI_SR_UPDATE_STOP_CON, msg, MMI_QUEUE); *state = RESET; } } else { // End process return; } } break; case WAIT_BACK_TASK_DONE: { if (SignalCode == MMI_SR_UPDATE_STOP_REQ) { // Stop immediatly the background task l1_srback_com.emergency_stop = TRUE; *state = WAIT_BACK_STOP; } else if (SignalCode == L1_SRBACK_SAVE_DATA_CON) { // Send the message MMI_SR_UPDATE_STOP_CON with an acquisition error #if (OP_RIV_AUDIO == 1) // Allocate the Riviera buffer mb_status = rvf_get_buf ( p_audio_gbl_var->mb_internal, sizeof (T_MMI_SR_UPDATE_STOP_CON), (T_RVF_BUFFER **) (&p_message)); // If insufficient resources, then report a memory error and abort. if (mb_status == RVF_RED) { // the memory is insufficient to continue the non regression test AUDIO_SEND_TRACE("AUDIO entity has no memory for L1 confirm",RV_TRACE_LEVEL_ERROR); return; } // Fill the message ID ((T_MMI_SR_UPDATE_STOP_CON *)(p_message))->header.msg_id = MMI_SR_UPDATE_STOP_CON; // Fill the message parameter ((T_MMI_SR_UPDATE_STOP_CON *)(p_message))->error_id = SC_NO_ERROR; // send the messsage to the audio entity rvf_send_msg (p_audio_gbl_var->addrId, p_message); #else // OP_RIV_AUDIO // Allocate confirmation message... conf_msg = os_alloc_sig(sizeof(T_MMI_SR_UPDATE_STOP_CON)); DEBUGMSG(status,NU_ALLOC_ERR) conf_msg->SignalCode = MMI_SR_UPDATE_STOP_CON; //Fill the message ((T_MMI_SR_UPDATE_STOP_CON *)(conf_msg->SigP))->error_id = SC_NO_ERROR; #if (TRACE_TYPE==1) || (TRACE_TYPE==4) l1_trace_message(conf_msg); #endif // Send the confirmation message... os_send_sig(conf_msg, MMI_QUEUE); DEBUGMSG(status,NU_SEND_QUEUE_ERR) #endif // OP_RIV_AUDIO *state = RESET; } else { // End process return; } } break; case WAIT_BACK_STOP: { if ( (SignalCode == L1_SRBACK_SAVE_DATA_CON) || (SignalCode == L1_SRBACK_LOAD_MODEL_CON) ) { // Send the message MMI_SR_UPDATE_STOP_CON with an update error #if (OP_RIV_AUDIO == 1) // Allocate the Riviera buffer mb_status = rvf_get_buf ( p_audio_gbl_var->mb_internal, sizeof (T_MMI_SR_UPDATE_STOP_CON), (T_RVF_BUFFER **) (&p_message)); // If insufficient resources, then report a memory error and abort. if (mb_status == RVF_RED) { // the memory is insufficient to continue the non regression test AUDIO_SEND_TRACE("AUDIO entity has no memory for L1 confirm",RV_TRACE_LEVEL_ERROR); return; } // Fill the message ID ((T_MMI_SR_UPDATE_STOP_CON *)(p_message))->header.msg_id = MMI_SR_UPDATE_STOP_CON; // Fill the message parameter ((T_MMI_SR_UPDATE_STOP_CON *)(p_message))->error_id = SC_BAD_UPDATE; // send the messsage to the audio entity rvf_send_msg (p_audio_gbl_var->addrId, p_message); #else // OP_RIV_AUDIO // Allocate confirmation message... conf_msg = os_alloc_sig(sizeof(T_MMI_SR_UPDATE_STOP_CON)); DEBUGMSG(status,NU_ALLOC_ERR) conf_msg->SignalCode = MMI_SR_UPDATE_STOP_CON; //Fill the message ((T_MMI_SR_UPDATE_STOP_CON *)(conf_msg->SigP))->error_id = SC_BAD_UPDATE; #if (TRACE_TYPE==1) || (TRACE_TYPE==4) l1_trace_message(conf_msg); #endif // Send the confirmation message... os_send_sig(conf_msg, MMI_QUEUE); DEBUGMSG(status,NU_SEND_QUEUE_ERR) #endif // OP_RIV_AUDIO *state = RESET; } else { // End process return; } } break; case WAIT_L1S_STOP: { if (SignalCode == L1_SR_UPDATE_STOP_CON) { // Send the message MMI_SR_UPDATE_STOP_CON with an update error #if (OP_RIV_AUDIO == 1) // Allocate the Riviera buffer mb_status = rvf_get_buf ( p_audio_gbl_var->mb_internal, sizeof (T_MMI_SR_UPDATE_STOP_CON), (T_RVF_BUFFER **) (&p_message)); // If insufficient resources, then report a memory error and abort. if (mb_status == RVF_RED) { // the memory is insufficient to continue the non regression test AUDIO_SEND_TRACE("AUDIO entity has no memory for L1 confirm",RV_TRACE_LEVEL_ERROR); return; } // Fill the message ID ((T_MMI_SR_UPDATE_STOP_CON *)(p_message))->header.msg_id = MMI_SR_UPDATE_STOP_CON; // Fill the message parameter ((T_MMI_SR_UPDATE_STOP_CON *)(p_message))->error_id = SC_BAD_UPDATE; // send the messsage to the audio entity rvf_send_msg (p_audio_gbl_var->addrId, p_message); #else // OP_RIV_AUDIO // Allocate confirmation message... conf_msg = os_alloc_sig(sizeof(T_MMI_SR_UPDATE_STOP_CON)); DEBUGMSG(status,NU_ALLOC_ERR) conf_msg->SignalCode = MMI_SR_UPDATE_STOP_CON; //Fill the message ((T_MMI_SR_UPDATE_STOP_CON *)(conf_msg->SigP))->error_id = SC_BAD_UPDATE; #if (TRACE_TYPE==1) || (TRACE_TYPE==4) l1_trace_message(conf_msg); #endif // Send the confirmation message... os_send_sig(conf_msg, MMI_QUEUE); DEBUGMSG(status,NU_SEND_QUEUE_ERR) #endif // OP_RIV_AUDIO *state = RESET; } else { // End process return; } } break; } // switch } // while(1) } /*-------------------------------------------------------*/ /* l1a_mmi_sr_reco_process() */ /*-------------------------------------------------------*/ /* */ /* Description: */ /* ------------ */ /* This function is a state machine which handles the */ /* speech recognition reco feature. */ /* */ /* Starting messages: MMI_SR_RECO_START_REQ */ /* */ /* Result messages (input): L1_SR_RECO_START_CON */ /* */ /* Result messages (output): MMI_SR_RECO_START_CON */ /* */ /* Reset messages (input): none */ /* */ /* Stop message (input): MMI_SR_RECO_STOP_REQ */ /* L1_SR_RECO_STOP_IND */ /* */ /* Stop message (output): MMI_SR_RECO_STOP_CON */ /* */ /* Rem: */ /* ---- */ /* */ /*-------------------------------------------------------*/ void l1a_mmi_sr_reco_process(xSignalHeaderRec *msg) { enum states { RESET = 0, WAIT_START_REQ = 1, WAIT_RECO_START = 2, WAIT_RECO_STOP = 3, LOAD_MODEL = 4, WAIT_MODEL_LOADED = 5, WAIT_PROCESSING_STOP = 6, WAIT_L1S_STOP = 7, WAIT_BACK_STOP = 8 }; UWORD8 *state = &l1a.state[L1A_SR_RECO_STATE]; UWORD32 SignalCode = msg->SignalCode; #if (OP_RIV_AUDIO == 1) void *p_message; T_RVF_MB_STATUS mb_status; #else xSignalHeaderRec *conf_msg; #endif while(1) { switch(*state) { case RESET: { // Reset the commands l1a_l1s_com.speechreco_task.command.reco_start = FALSE; l1a_l1s_com.speechreco_task.command.reco_stop = FALSE; l1a_l1s_com.speechreco_task.command.processing_start = FALSE; l1a_l1s_com.speechreco_task.command.processing_stop = FALSE; *state = WAIT_START_REQ; } break; case WAIT_START_REQ: { if (SignalCode == MMI_SR_RECO_START_REQ) { // Reset the index counter l1a_l1s_com.speechreco_task.parameters.index_counter = 0; // Download the parameters to the l1a_l1s_com.speechreco_task.parameters memory l1a_l1s_com.speechreco_task.parameters.database_id = ((T_MMI_SR_RECO_REQ *)(msg->SigP))->database_id; l1a_l1s_com.speechreco_task.parameters.vocabulary_size = ((T_MMI_SR_RECO_REQ *)(msg->SigP))->vocabulary_size; l1a_l1s_com.speechreco_task.parameters.model_address = l1s_dsp_com.dsp_ndb_ptr->a_model; // The CTO algorithm must be used? if (l1a_l1s_com.speechreco_task.parameters.vocabulary_size <= SC_SR_MAX_WORDS_FOR_CTO) { // Enable the CTO algorithm l1a_l1s_com.speechreco_task.parameters.CTO_algorithm = TRUE; // Double the vocabulary size l1a_l1s_com.speechreco_task.parameters.vocabulary_size <<= 1; } else { // Disable the CTO algorithm l1a_l1s_com.speechreco_task.parameters.CTO_algorithm = FALSE; } // Start the speech recognition reco task l1a_l1s_com.speechreco_task.command.reco_start = TRUE; *state = WAIT_RECO_START; } // End process return; } break; case WAIT_RECO_START: { if (SignalCode == L1_SR_RECO_START_CON) { // Reset the start command l1a_l1s_com.speechreco_task.command.reco_start = FALSE; // Send the start confirmation message l1a_audio_send_confirmation(MMI_SR_RECO_START_CON); *state = WAIT_RECO_STOP; } // End process return; } break; case WAIT_RECO_STOP: { if (SignalCode == L1_SR_RECO_STOP_CON) { // The acqusition is good or not? if ( ((T_L1_SR_RECO_STOP_CON *)(msg->SigP))->error_id == SC_NO_ERROR ) { *state = LOAD_MODEL; } else { // Send the message MMI_SR_RECO_STOP_CON with an error #if (OP_RIV_AUDIO == 1) // Allocate the Riviera buffer mb_status = rvf_get_buf ( p_audio_gbl_var->mb_internal, sizeof (T_MMI_SR_RECO_STOP_CON), (T_RVF_BUFFER **) (&p_message)); // If insufficient resources, then report a memory error and abort. if (mb_status == RVF_RED) { // the memory is insufficient to continue the non regression test AUDIO_SEND_TRACE("AUDIO entity has no memory for L1 confirm",RV_TRACE_LEVEL_ERROR); return; } // Fill the message ID ((T_MMI_SR_RECO_STOP_CON *)(p_message))->header.msg_id = MMI_SR_RECO_STOP_CON; // Fill the message parameter ((T_MMI_SR_RECO_STOP_CON *)(p_message))->error_id = ((T_L1_SR_RECO_STOP_CON *)(msg->SigP))->error_id; // send the messsage to the audio entity rvf_send_msg (p_audio_gbl_var->addrId, p_message); #else // OP_RIV_AUDIO // Allocate confirmation message... conf_msg = os_alloc_sig(sizeof(T_MMI_SR_RECO_STOP_CON)); DEBUGMSG(status,NU_ALLOC_ERR) conf_msg->SignalCode = MMI_SR_RECO_STOP_CON; // File the message ((T_MMI_SR_RECO_STOP_CON *)(conf_msg->SigP))->error_id = ((T_L1_SR_RECO_STOP_CON *)(msg->SigP))->error_id; #if (TRACE_TYPE==1) || (TRACE_TYPE==4) l1_trace_message(conf_msg); #endif // Send the confirmation message... os_send_sig(conf_msg, MMI_QUEUE); DEBUGMSG(status,NU_SEND_QUEUE_ERR) #endif // OP_RIV_AUDIO *state = RESET; } } else if(SignalCode == MMI_SR_RECO_STOP_REQ) { // Stop the speech recognition task l1a_l1s_com.speechreco_task.command.reco_stop = TRUE; *state = WAIT_L1S_STOP; // End process return; } else { // End process return; } } break; case LOAD_MODEL: { // Initialize the background task stop command l1_srback_com.emergency_stop = FALSE; // Start to load the model to the API l1a_l1s_com.speechreco_task.parameters.word_index = l1a_l1s_com.speechreco_task.parameters.index_counter; l1_send_sr_background_msg(L1_SRBACK_LOAD_MODEL_REQ); // Increase the index counter l1a_l1s_com.speechreco_task.parameters.index_counter++; *state = WAIT_MODEL_LOADED; // End process return; } break; case WAIT_MODEL_LOADED: { if (SignalCode == L1_SRBACK_LOAD_MODEL_CON) { // Start the DSP processing task l1a_l1s_com.speechreco_task.command.processing_start = TRUE; *state = WAIT_PROCESSING_STOP; } else if (SignalCode == MMI_SR_RECO_STOP_REQ) { // Stop immediatly the background task l1_srback_com.emergency_stop = TRUE; *state = WAIT_BACK_STOP; } // End process return; } break; case WAIT_PROCESSING_STOP: { if (SignalCode == L1_SR_PROCESSING_STOP_CON) { // The processing phase is good or not? if ( ((T_L1_SR_PROCESSING_STOP_CON *)(msg->SigP))->error_id == SC_NO_ERROR ) { *state = LOAD_MODEL; } else { // Send the MMI_SR_RECO_STOP_CON message with an error #if (OP_RIV_AUDIO == 1) // Allocate the Riviera buffer mb_status = rvf_get_buf ( p_audio_gbl_var->mb_internal, sizeof (T_MMI_SR_RECO_STOP_CON), (T_RVF_BUFFER **) (&p_message)); // If insufficient resources, then report a memory error and abort. if (mb_status == RVF_RED) { // the memory is insufficient to continue the non regression test AUDIO_SEND_TRACE("AUDIO entity has no memory for L1 confirm",RV_TRACE_LEVEL_ERROR); return; } // Fill the message ID ((T_MMI_SR_RECO_STOP_CON *)(p_message))->header.msg_id = MMI_SR_RECO_STOP_CON; // Fill the message parameter ((T_MMI_SR_RECO_STOP_CON *)(p_message))->error_id = ((T_L1_SR_PROCESSING_STOP_CON *)(msg->SigP))->error_id; #else // OP_RIV_AUDIO // Allocate confirmation message... conf_msg = os_alloc_sig(sizeof(T_MMI_SR_RECO_STOP_CON)); DEBUGMSG(status,NU_ALLOC_ERR) conf_msg->SignalCode = MMI_SR_RECO_STOP_CON; // File the message ((T_MMI_SR_RECO_STOP_CON *)(conf_msg->SigP))->error_id = ((T_L1_SR_PROCESSING_STOP_CON *)(msg->SigP))->error_id; #if (TRACE_TYPE==1) || (TRACE_TYPE==4) l1_trace_message(conf_msg); #endif // Send the confirmation message... os_send_sig(conf_msg, MMI_QUEUE); DEBUGMSG(status,NU_SEND_QUEUE_ERR) #endif // OP_RIV_AUDIO *state = RESET; } } else if (SignalCode == L1_SR_RECO_STOP_IND) { // The CTO algorithm is used? if (l1a_l1s_com.speechreco_task.parameters.CTO_algorithm) { // There is an error during the recognition? if ( ((T_L1_SR_RECO_STOP_IND *)(msg->SigP))->error_id == SC_NO_ERROR ) { // The best word is odd? if ( ((T_L1_SR_RECO_STOP_IND *)(msg->SigP))->best_word_index & 0x01 ) { // Change the error to tSC_CTO_WORD ((T_L1_SR_RECO_STOP_IND *)(msg->SigP))->error_id = SC_CTO_WORD; } else { // Devided by 2 the 4 indexes of the best words in the message ((T_L1_SR_RECO_STOP_IND *)(msg->SigP))->best_word_index >>= 1; ((T_L1_SR_RECO_STOP_IND *)(msg->SigP))->second_best_word_index >>= 1; ((T_L1_SR_RECO_STOP_IND *)(msg->SigP))->third_best_word_index >>= 1; ((T_L1_SR_RECO_STOP_IND *)(msg->SigP))->fourth_best_word_index >>= 1; } } } // Forward the message in the MMI_SR_RECO_STOP_CON l1a_audio_send_result(MMI_SR_RECO_STOP_CON, msg, MMI_QUEUE); *state = RESET; } else if (SignalCode == MMI_SR_RECO_STOP_REQ) { // Stop the L1S processing task l1a_l1s_com.speechreco_task.command.processing_stop = TRUE; *state = WAIT_L1S_STOP; // end process return; } else { // end process return; } } break; case WAIT_L1S_STOP: { if ( (SignalCode == L1_SR_PROCESSING_STOP_CON) || (SignalCode == L1_SR_RECO_STOP_CON) || (SignalCode == L1_SR_RECO_STOP_IND) ) { // Send the message MMI_SR_RECO_STOP_CON with a bad recognition error #if (OP_RIV_AUDIO == 1) // Allocate the Riviera buffer mb_status = rvf_get_buf ( p_audio_gbl_var->mb_internal, sizeof (T_MMI_SR_RECO_STOP_CON), (T_RVF_BUFFER **) (&p_message)); // If insufficient resources, then report a memory error and abort. if (mb_status == RVF_RED) { // the memory is insufficient to continue the non regression test AUDIO_SEND_TRACE("AUDIO entity has no memory for L1 confirm",RV_TRACE_LEVEL_ERROR); return; } // Fill the message ID ((T_MMI_SR_RECO_STOP_CON *)(p_message))->header.msg_id = MMI_SR_RECO_STOP_CON; // Fill the message parameter ((T_MMI_SR_RECO_STOP_CON *)(p_message))->error_id = SC_BAD_RECOGNITION; // send the messsage to the audio entity rvf_send_msg (p_audio_gbl_var->addrId, p_message); #else // OP_RIV_AUDIO // Allocate confirmation message... conf_msg = os_alloc_sig(sizeof(T_MMI_SR_RECO_STOP_CON)); DEBUGMSG(status,NU_ALLOC_ERR) conf_msg->SignalCode = MMI_SR_RECO_STOP_CON; // File the message ((T_MMI_SR_RECO_STOP_CON *)(conf_msg->SigP))->error_id = SC_BAD_RECOGNITION; #if (TRACE_TYPE==1) || (TRACE_TYPE==4) l1_trace_message(conf_msg); #endif // Send the confirmation message... os_send_sig(conf_msg, MMI_QUEUE); DEBUGMSG(status,NU_SEND_QUEUE_ERR) #endif // OP_RIV_AUDIO *state = RESET; } else { // End process return; } } break; case WAIT_BACK_STOP: { if (SignalCode == L1_SRBACK_LOAD_MODEL_CON) { // Send the MMI_SR_RECO_STOP_CON with an bad recognition error #if (OP_RIV_AUDIO == 1) // Allocate the Riviera buffer mb_status = rvf_get_buf ( p_audio_gbl_var->mb_internal, sizeof (T_MMI_SR_RECO_STOP_CON), (T_RVF_BUFFER **) (&p_message)); // If insufficient resources, then report a memory error and abort. if (mb_status == RVF_RED) { // the memory is insufficient to continue the non regression test AUDIO_SEND_TRACE("AUDIO entity has no memory for L1 confirm",RV_TRACE_LEVEL_ERROR); return; } // Fill the message ID ((T_MMI_SR_RECO_STOP_CON *)(p_message))->header.msg_id = MMI_SR_RECO_STOP_CON; // Fill the message parameter ((T_MMI_SR_RECO_STOP_CON *)(p_message))->error_id = SC_BAD_RECOGNITION; // send the messsage to the audio entity rvf_send_msg (p_audio_gbl_var->addrId, p_message); #else // OP_RIV_AUDIO // Allocate confirmation message... conf_msg = os_alloc_sig(sizeof(T_MMI_SR_RECO_STOP_CON)); DEBUGMSG(status,NU_ALLOC_ERR) conf_msg->SignalCode = MMI_SR_RECO_STOP_CON; // Fill the message ((T_MMI_SR_RECO_STOP_CON *)(conf_msg->SigP))->error_id = SC_BAD_RECOGNITION; #if (TRACE_TYPE==1) || (TRACE_TYPE==4) l1_trace_message(conf_msg); #endif // Send the confirmation message... os_send_sig(conf_msg, MMI_QUEUE); DEBUGMSG(status,NU_SEND_QUEUE_ERR) #endif // OP_RIV_AUDIO *state = RESET; } else { // End process return; } } break; } // switch } // while(1) } /*---------------------------------------------------------*/ /* l1a_mmi_sr_update_check_process() */ /*---------------------------------------------------------*/ /* */ /* Description: */ /* ------------ */ /* This function is a state machine which handles the */ /* speech recognition update check feature. */ /* */ /* Starting messages: MMI_SR_UPDATE_CHECK_START_REQ */ /* */ /* Result messages (input): L1_SR_UPDATE_START_CON */ /* */ /* Result messages (output): MMI_SR_UPDATE_CHECK_START_CON */ /* */ /* Reset messages (input): none */ /* */ /* Stop message (input): MMI_SR_UPDATE_CHECK_STOP_REQ */ /* L1_SR_RECO_STOP_IND */ /* */ /* Stop message (output): MMI_SR_UPDATE_CHECK_STOP_CON */ /* */ /* Rem: */ /* ---- */ /* */ /*---------------------------------------------------------*/ void l1a_mmi_sr_update_check_process(xSignalHeaderRec *msg) { enum states { RESET = 0, WAIT_START_REQ = 1, WAIT_MODEL = 2, WAIT_UPDATE_START = 3, WAIT_UPDATE_STOP = 4, WAIT_TEMP_SAVE_DONE = 5, LOAD_MODEL = 6, WAIT_MODEL_LOADED = 7, WAIT_PROCESSING_STOP = 8, WAIT_SAVE_DONE = 9, WAIT_L1S_STOP = 10, WAIT_BACK_STOP = 11 }; UWORD8 *state = &l1a.state[L1A_SR_UPDATE_CHECK_STATE]; UWORD32 SignalCode = msg->SignalCode; #if (OP_RIV_AUDIO == 1) void *p_message; T_RVF_MB_STATUS mb_status; #define AUDIO_MSG (p_message) #else xSignalHeaderRec *conf_msg; #define AUDIO_MSG (conf_msg->SigP) #endif while(1) { switch(*state) { case RESET: { // Reset the commands l1a_l1s_com.speechreco_task.command.update_start = FALSE; l1a_l1s_com.speechreco_task.command.update_stop = FALSE; l1a_l1s_com.speechreco_task.command.speech_start = FALSE; l1a_l1s_com.speechreco_task.command.speech_stop = FALSE; *state = WAIT_START_REQ; } break; case WAIT_START_REQ: { if (SignalCode == MMI_SR_UPDATE_CHECK_START_REQ) { // Download the message parameters to the parameters memory l1a_l1s_com.speechreco_task.parameters.database_id = ((T_MMI_SR_UPDATE_CHECK_REQ *)(msg->SigP))->database_id; l1a_l1s_com.speechreco_task.parameters.word_index = ((T_MMI_SR_UPDATE_CHECK_REQ *)(msg->SigP))->word_index; l1a_l1s_com.speechreco_task.parameters.word_to_check = ((T_MMI_SR_UPDATE_CHECK_REQ *)(msg->SigP))->word_index; l1a_l1s_com.speechreco_task.parameters.model_address = l1s_dsp_com.dsp_ndb_ptr->a_model; l1a_l1s_com.speechreco_task.parameters.model_temp_address = ((T_MMI_SR_UPDATE_CHECK_REQ *)(msg->SigP))->model_address; l1a_l1s_com.speechreco_task.parameters.speech = ((T_MMI_SR_UPDATE_CHECK_REQ *)(msg->SigP))->speech; l1a_l1s_com.speechreco_task.parameters.speech_address = ((T_MMI_SR_UPDATE_CHECK_REQ *)(msg->SigP))->speech_address; l1a_l1s_com.speechreco_task.parameters.vocabulary_size = ((T_MMI_SR_UPDATE_CHECK_REQ *)(msg->SigP))->vocabulary_size; // Reset the background task emergency stop l1_srback_com.emergency_stop = FALSE; // Start to download the model to the API l1a_l1s_com.speechreco_task.parameters.CTO_algorithm = FALSE; l1_send_sr_background_msg(L1_SRBACK_LOAD_MODEL_REQ); // Send the start confirmation message l1a_audio_send_confirmation(MMI_SR_UPDATE_CHECK_START_CON); *state = WAIT_MODEL; } // End process return; } break; case WAIT_MODEL: { if (SignalCode == MMI_SR_UPDATE_CHECK_STOP_REQ) { // Stop immediatly the background task l1_srback_com.emergency_stop = TRUE; *state = WAIT_BACK_STOP; } else if (SignalCode == L1_SRBACK_LOAD_MODEL_CON) { // Set the start command of the speech recording task l1a_l1s_com.speechreco_task.command.speech_start = l1a_l1s_com.speechreco_task.parameters.speech; // Start the speech recognition update task l1a_l1s_com.speechreco_task.command.update_start = TRUE; *state = WAIT_UPDATE_START; } // End process return; } break; case WAIT_UPDATE_START: { if (SignalCode == MMI_SR_UPDATE_CHECK_STOP_REQ) { // Stop the speech recognition update task l1a_l1s_com.speechreco_task.command.update_stop = TRUE; // Stop the speech recording task (if present) l1a_l1s_com.speechreco_task.command.speech_stop = l1a_l1s_com.speechreco_task.parameters.speech; *state = WAIT_L1S_STOP; } else if (SignalCode == L1_SR_UPDATE_START_CON) { // Reset the commands l1a_l1s_com.speechreco_task.command.update_start = FALSE; l1a_l1s_com.speechreco_task.command.speech_start = FALSE; *state = WAIT_UPDATE_STOP; } // End process return; } break; case WAIT_UPDATE_STOP: { if (SignalCode == MMI_SR_UPDATE_CHECK_STOP_REQ) { // Stop the speech recognition update task l1a_l1s_com.speechreco_task.command.update_stop = TRUE; // Stop the speech recording task (if present) l1a_l1s_com.speechreco_task.command.speech_stop = l1a_l1s_com.speechreco_task.parameters.speech; *state = WAIT_L1S_STOP; // End process return; } else if (SignalCode == L1_SR_UPDATE_STOP_CON) { // There is an error during the update task? if ( ((T_L1_SR_UPDATE_STOP_CON *)(msg->SigP))->error_id == SC_NO_ERROR ) { // Reset the background task emergency stop l1_srback_com.emergency_stop = FALSE; // Send the message L1_SRBACK_SAVE_DATA_REQ to the background task l1_send_sr_background_msg(L1_SRBACK_TEMP_SAVE_DATA_REQ); *state = WAIT_TEMP_SAVE_DONE; // End process return; } else { // Forward the stop confirmation message l1a_audio_send_result(MMI_SR_UPDATE_CHECK_STOP_CON, msg, MMI_QUEUE); *state = RESET; } } else { // End process return; } } break; case WAIT_TEMP_SAVE_DONE: { if (SignalCode == MMI_SR_UPDATE_CHECK_STOP_REQ) { // Stop immediatly the background task l1_srback_com.emergency_stop = TRUE; *state = WAIT_BACK_STOP; // End process return; } else if (SignalCode == L1_SRBACK_TEMP_SAVE_DATA_CON) { // Reset the command l1a_l1s_com.speechreco_task.command.processing_start = FALSE; l1a_l1s_com.speechreco_task.command.processing_stop = FALSE; // Reset the index counter l1a_l1s_com.speechreco_task.parameters.index_counter = 0; // The CTO algorithm must be used? if (l1a_l1s_com.speechreco_task.parameters.vocabulary_size <= SC_SR_MAX_WORDS_FOR_CTO) { // Enable the CTO algorithm l1a_l1s_com.speechreco_task.parameters.CTO_algorithm = TRUE; // Double the vocabulary size l1a_l1s_com.speechreco_task.parameters.vocabulary_size <<= 1; } else { // Disable the CTO algorithm l1a_l1s_com.speechreco_task.parameters.CTO_algorithm = FALSE; } *state = LOAD_MODEL; } else { // End process return; } } break; case LOAD_MODEL: { // Initialize the background task stop command l1_srback_com.emergency_stop = FALSE; // Start to load the model to the API l1a_l1s_com.speechreco_task.parameters.word_index = l1a_l1s_com.speechreco_task.parameters.index_counter; l1_send_sr_background_msg(L1_SRBACK_LOAD_MODEL_REQ); // Increase the index counter l1a_l1s_com.speechreco_task.parameters.index_counter++; *state = WAIT_MODEL_LOADED; // End process return; } break; case WAIT_MODEL_LOADED: { if (SignalCode == L1_SRBACK_LOAD_MODEL_CON) { // Start the DSP processing task l1a_l1s_com.speechreco_task.command.processing_start = TRUE; *state = WAIT_PROCESSING_STOP; } else if (SignalCode == MMI_SR_UPDATE_CHECK_STOP_REQ) { // Stop immediatly the background task l1_srback_com.emergency_stop = TRUE; *state = WAIT_BACK_STOP; } // End process return; } break; case WAIT_PROCESSING_STOP: { if (SignalCode == L1_SR_PROCESSING_STOP_CON) { // The processing phase is good or not? if ( ((T_L1_SR_PROCESSING_STOP_CON *)(msg->SigP))->error_id == SC_NO_ERROR ) { *state = LOAD_MODEL; } else { // Send the MMI_SR_UPDATE_CHECK_STOP_CON message with an error #if (OP_RIV_AUDIO == 1) // Allocate the Riviera buffer mb_status = rvf_get_buf ( p_audio_gbl_var->mb_internal, sizeof (T_MMI_SR_UPDATE_CHECK_STOP_CON), (T_RVF_BUFFER **) (&p_message)); // If insufficient resources, then report a memory error and abort. if (mb_status == RVF_RED) { // the memory is insufficient to continue the non regression test AUDIO_SEND_TRACE("AUDIO entity has no memory for L1 confirm",RV_TRACE_LEVEL_ERROR); return; } // Fill the message ID ((T_MMI_SR_UPDATE_CHECK_STOP_CON *)(p_message))->header.msg_id = MMI_SR_UPDATE_CHECK_STOP_CON; // Fill the message parameter ((T_MMI_SR_UPDATE_CHECK_STOP_CON *)(p_message))->error_id = ((T_L1_SR_PROCESSING_STOP_CON *)(msg->SigP))->error_id; // send the messsage to the audio entity rvf_send_msg (p_audio_gbl_var->addrId, p_message); #else // OP_RIV_AUDIO // Allocate confirmation message... conf_msg = os_alloc_sig(sizeof(T_MMI_SR_UPDATE_CHECK_STOP_CON)); DEBUGMSG(status,NU_ALLOC_ERR) conf_msg->SignalCode = MMI_SR_UPDATE_CHECK_STOP_CON; // File the message ((T_MMI_SR_UPDATE_CHECK_STOP_CON *)(conf_msg->SigP))->error_id = ((T_L1_SR_PROCESSING_STOP_CON *)(msg->SigP))->error_id; #if (TRACE_TYPE==1) || (TRACE_TYPE==4) l1_trace_message(conf_msg); #endif // Send the confirmation message... os_send_sig(conf_msg, MMI_QUEUE); DEBUGMSG(status,NU_SEND_QUEUE_ERR) #endif // OP_RIV_AUDIO *state = RESET; } } else if (SignalCode == L1_SR_RECO_STOP_IND) { // There is an error during the recognition? if ( ((T_L1_SR_RECO_STOP_IND *)(msg->SigP))->error_id == SC_NO_ERROR ) { // The CTO algorithm is used? if (l1a_l1s_com.speechreco_task.parameters.CTO_algorithm) { // The best word is odd? if ( ((T_L1_SR_RECO_STOP_IND *)(msg->SigP))->best_word_index & 0x01 ) { // Change the error to SC_CTO_WORD ((T_L1_SR_RECO_STOP_IND *)(msg->SigP))->error_id = SC_CTO_WORD; // Forward the message in the MMI_SR_RECO_STOP_CON l1a_audio_send_result(MMI_SR_UPDATE_CHECK_STOP_CON, msg, MMI_QUEUE); *state = RESET; // End process return; } else { // Devided by 2 the 4 indexes of the best words in the message ((T_L1_SR_RECO_STOP_IND *)(msg->SigP))->best_word_index >>= 1; ((T_L1_SR_RECO_STOP_IND *)(msg->SigP))->second_best_word_index >>= 1; ((T_L1_SR_RECO_STOP_IND *)(msg->SigP))->third_best_word_index >>= 1; ((T_L1_SR_RECO_STOP_IND *)(msg->SigP))->fourth_best_word_index >>= 1; } } // Is it the good word? if ( ((T_L1_SR_RECO_STOP_IND *)(msg->SigP))->best_word_index == l1a_l1s_com.speechreco_task.parameters.word_to_check ) { // Save the message informations in the l1a_l1s_com memory l1a_l1s_com.speechreco_task.parameters.best_word_index = ((T_L1_SR_RECO_STOP_IND *)(msg->SigP))->best_word_index; l1a_l1s_com.speechreco_task.parameters.best_word_score = ((T_L1_SR_RECO_STOP_IND *)(msg->SigP))->best_word_score; l1a_l1s_com.speechreco_task.parameters.second_best_word_index = ((T_L1_SR_RECO_STOP_IND *)(msg->SigP))->second_best_word_index; l1a_l1s_com.speechreco_task.parameters.second_best_word_score = ((T_L1_SR_RECO_STOP_IND *)(msg->SigP))->second_best_word_score; l1a_l1s_com.speechreco_task.parameters.third_best_word_index = ((T_L1_SR_RECO_STOP_IND *)(msg->SigP))->third_best_word_index; l1a_l1s_com.speechreco_task.parameters.third_best_word_score = ((T_L1_SR_RECO_STOP_IND *)(msg->SigP))->third_best_word_score; l1a_l1s_com.speechreco_task.parameters.fourth_best_word_index = ((T_L1_SR_RECO_STOP_IND *)(msg->SigP))->fourth_best_word_index; l1a_l1s_com.speechreco_task.parameters.fourth_best_word_score = ((T_L1_SR_RECO_STOP_IND *)(msg->SigP))->fourth_best_word_score; l1a_l1s_com.speechreco_task.parameters.d_sr_db_level = ((T_L1_SR_RECO_STOP_IND *)(msg->SigP))->d_sr_db_level; l1a_l1s_com.speechreco_task.parameters.d_sr_db_noise = ((T_L1_SR_RECO_STOP_IND *)(msg->SigP))->d_sr_db_noise; l1a_l1s_com.speechreco_task.parameters.d_sr_model_size = ((T_L1_SR_RECO_STOP_IND *)(msg->SigP))->d_sr_model_size; // Reset the stop background task l1_srback_com.emergency_stop = FALSE; // Start the background task to save the model in the database l1a_l1s_com.speechreco_task.parameters.word_index = l1a_l1s_com.speechreco_task.parameters.word_to_check; l1a_l1s_com.speechreco_task.parameters.model_address = l1a_l1s_com.speechreco_task.parameters.model_temp_address; l1_send_sr_background_msg(L1_SRBACK_SAVE_DATA_REQ); *state = WAIT_SAVE_DONE; // End process return; } else { // Change the error to SC_CHECK_ERROR ((T_L1_SR_RECO_STOP_IND *)(msg->SigP))->error_id = SC_CHECK_ERROR; } } // Forward the message in the MMI_SR_RECO_STOP_CON l1a_audio_send_result(MMI_SR_UPDATE_CHECK_STOP_CON, msg, MMI_QUEUE); *state = RESET; } else if (SignalCode == MMI_SR_UPDATE_CHECK_STOP_REQ) { // Stop the L1S processing task l1a_l1s_com.speechreco_task.command.processing_stop = TRUE; *state = WAIT_L1S_STOP; // end process return; } else { // end process return; } } break; case WAIT_SAVE_DONE: { if (SignalCode == MMI_SR_UPDATE_CHECK_STOP_REQ) { // Stop immediatly the background task l1_srback_com.emergency_stop = TRUE; *state = WAIT_BACK_STOP; // End process return; } else if (SignalCode == L1_SRBACK_SAVE_DATA_CON) { // Send the MMI_SR_UPDATE_CHECK_STOP_CON message with an error #if (OP_RIV_AUDIO == 1) // Allocate the Riviera buffer mb_status = rvf_get_buf ( p_audio_gbl_var->mb_internal, sizeof (T_MMI_SR_UPDATE_CHECK_STOP_CON), (T_RVF_BUFFER **) (&p_message)); // If insufficient resources, then report a memory error and abort. if (mb_status == RVF_RED) { // the memory is insufficient to continue the non regression test AUDIO_SEND_TRACE("AUDIO entity has no memory for L1 confirm",RV_TRACE_LEVEL_ERROR); return; } // Fill the message ID ((T_MMI_SR_UPDATE_CHECK_STOP_CON *)(p_message))->header.msg_id = MMI_SR_UPDATE_CHECK_STOP_CON; #else // OP_RIV_AUDIO // Allocate confirmation message... conf_msg = os_alloc_sig(sizeof(T_MMI_SR_UPDATE_CHECK_STOP_CON)); DEBUGMSG(status,NU_ALLOC_ERR) conf_msg->SignalCode = MMI_SR_UPDATE_CHECK_STOP_CON; #endif // OP_RIV_AUDIO // Fill the message parameter ((T_MMI_SR_UPDATE_CHECK_STOP_CON *)(AUDIO_MSG))->error_id = SC_NO_ERROR; ((T_MMI_SR_UPDATE_CHECK_STOP_CON *)(AUDIO_MSG))->best_word_index = l1a_l1s_com.speechreco_task.parameters.best_word_index; ((T_MMI_SR_UPDATE_CHECK_STOP_CON *)(AUDIO_MSG))->best_word_score = l1a_l1s_com.speechreco_task.parameters.best_word_score; ((T_MMI_SR_UPDATE_CHECK_STOP_CON *)(AUDIO_MSG))->second_best_word_index = l1a_l1s_com.speechreco_task.parameters.second_best_word_index; ((T_MMI_SR_UPDATE_CHECK_STOP_CON *)(AUDIO_MSG))->second_best_word_score = l1a_l1s_com.speechreco_task.parameters.second_best_word_score; ((T_MMI_SR_UPDATE_CHECK_STOP_CON *)(AUDIO_MSG))->third_best_word_index = l1a_l1s_com.speechreco_task.parameters.third_best_word_index; ((T_MMI_SR_UPDATE_CHECK_STOP_CON *)(AUDIO_MSG))->third_best_word_score = l1a_l1s_com.speechreco_task.parameters.third_best_word_score; ((T_MMI_SR_UPDATE_CHECK_STOP_CON *)(AUDIO_MSG))->fourth_best_word_index = l1a_l1s_com.speechreco_task.parameters.fourth_best_word_index; ((T_MMI_SR_UPDATE_CHECK_STOP_CON *)(AUDIO_MSG))->fourth_best_word_score = l1a_l1s_com.speechreco_task.parameters.fourth_best_word_score; ((T_MMI_SR_UPDATE_CHECK_STOP_CON *)(AUDIO_MSG))->d_sr_db_level = l1a_l1s_com.speechreco_task.parameters.d_sr_db_level; ((T_MMI_SR_UPDATE_CHECK_STOP_CON *)(AUDIO_MSG))->d_sr_db_noise = l1a_l1s_com.speechreco_task.parameters.d_sr_db_noise; ((T_MMI_SR_UPDATE_CHECK_STOP_CON *)(AUDIO_MSG))->d_sr_model_size = l1a_l1s_com.speechreco_task.parameters.d_sr_model_size; #if (OP_RIV_AUDIO == 1) // send the messsage to the audio entity rvf_send_msg (p_audio_gbl_var->addrId, p_message); #else // OP_RIV_AUDIO #if (TRACE_TYPE==1) || (TRACE_TYPE==4) l1_trace_message(conf_msg); #endif // Send the confirmation message... os_send_sig(conf_msg, MMI_QUEUE); DEBUGMSG(status,NU_SEND_QUEUE_ERR) #endif // OP_RIV_AUDIO *state = RESET; } else { // End process return; } } break; case WAIT_BACK_STOP: { if ( (SignalCode == L1_SRBACK_SAVE_DATA_CON) || (SignalCode == L1_SRBACK_LOAD_MODEL_CON) || (SignalCode == L1_SRBACK_TEMP_SAVE_DATA_CON) ) { // Send the message MMI_SR_UPDATE_STOP_CON with an update error #if (OP_RIV_AUDIO == 1) // Allocate the Riviera buffer mb_status = rvf_get_buf ( p_audio_gbl_var->mb_internal, sizeof (T_MMI_SR_UPDATE_CHECK_STOP_CON), (T_RVF_BUFFER **) (&p_message)); // If insufficient resources, then report a memory error and abort. if (mb_status == RVF_RED) { // the memory is insufficient to continue the non regression test AUDIO_SEND_TRACE("AUDIO entity has no memory for L1 confirm",RV_TRACE_LEVEL_ERROR); return; } // Fill the message ID ((T_MMI_SR_UPDATE_CHECK_STOP_CON *)(p_message))->header.msg_id = MMI_SR_UPDATE_CHECK_STOP_CON; // Fill the message parameter ((T_MMI_SR_UPDATE_CHECK_STOP_CON *)(p_message))->error_id = SC_CHECK_ERROR; // send the messsage to the audio entity rvf_send_msg (p_audio_gbl_var->addrId, p_message); #else // OP_RIV_AUDIO // Allocate confirmation message... conf_msg = os_alloc_sig(sizeof(T_MMI_SR_UPDATE_CHECK_STOP_CON)); DEBUGMSG(status,NU_ALLOC_ERR) conf_msg->SignalCode = MMI_SR_UPDATE_CHECK_STOP_CON; //Fill the message ((T_MMI_SR_UPDATE_CHECK_STOP_CON *)(conf_msg->SigP))->error_id = SC_CHECK_ERROR; #if (TRACE_TYPE==1) || (TRACE_TYPE==4) l1_trace_message(conf_msg); #endif // Send the confirmation message... os_send_sig(conf_msg, MMI_QUEUE); DEBUGMSG(status,NU_SEND_QUEUE_ERR) #endif // OP_RIV_AUDIO *state = RESET; } else { // End process return; } } break; case WAIT_L1S_STOP: { if ( (SignalCode == L1_SR_UPDATE_STOP_CON) || (SignalCode == L1_SR_PROCESSING_STOP_CON) || (SignalCode == L1_SR_RECO_STOP_CON) || (SignalCode == L1_SR_RECO_STOP_IND) ) { // Send the message MMI_SR_UPDATE_CHECK_STOP_CON with an update error #if (OP_RIV_AUDIO == 1) // Allocate the Riviera buffer mb_status = rvf_get_buf ( p_audio_gbl_var->mb_internal, sizeof (T_MMI_SR_UPDATE_CHECK_STOP_CON), (T_RVF_BUFFER **) (&p_message)); // If insufficient resources, then report a memory error and abort. if (mb_status == RVF_RED) { // the memory is insufficient to continue the non regression test AUDIO_SEND_TRACE("AUDIO entity has no memory for L1 confirm",RV_TRACE_LEVEL_ERROR); return; } // Fill the message ID ((T_MMI_SR_UPDATE_CHECK_STOP_CON *)(p_message))->header.msg_id = MMI_SR_UPDATE_CHECK_STOP_CON; // Fill the message parameter ((T_MMI_SR_UPDATE_CHECK_STOP_CON *)(p_message))->error_id = SC_CHECK_ERROR; // send the messsage to the audio entity rvf_send_msg (p_audio_gbl_var->addrId, p_message); #else // OP_RIV_AUDIO // Allocate confirmation message... conf_msg = os_alloc_sig(sizeof(T_MMI_SR_UPDATE_CHECK_STOP_CON)); DEBUGMSG(status,NU_ALLOC_ERR) conf_msg->SignalCode = MMI_SR_UPDATE_CHECK_STOP_CON; //Fill the message ((T_MMI_SR_UPDATE_CHECK_STOP_CON *)(conf_msg->SigP))->error_id = SC_CHECK_ERROR; #if (TRACE_TYPE==1) || (TRACE_TYPE==4) l1_trace_message(conf_msg); #endif // Send the confirmation message... os_send_sig(conf_msg, MMI_QUEUE); DEBUGMSG(status,NU_SEND_QUEUE_ERR) #endif // OP_RIV_AUDIO *state = RESET; } else { // End process return; } } break; } // switch } // while(1) // Undefine message pointer macro. #undef MSG_AUDIO } #endif // L1_DYN_DSP_DWNLD #endif // SPEECH_RECO #if (AEC == 1) /*-------------------------------------------------------*/ /* l1a_mmi_aec_process() */ /*-------------------------------------------------------*/ /* */ /* Description: */ /* ------------ */ /* This function is a state machine which handles the */ /* AEC feature. */ /* */ /* Starting messages: MMI_AEC_REQ */ /* */ /* Result messages (input): none */ /* */ /* Result messages (output): MMI_AEC_CON */ /* */ /* Reset messages (input): none */ /* */ /* Stop message (input): none */ /* */ /* Stop message (output): none */ /* */ /* Rem: */ /* ---- */ /* */ /*-------------------------------------------------------*/ #if 0 //(L1_DYN_DSP_DWNLD == 1) void l1a_mmi_aec_process(xSignalHeaderRec *msg) { enum states { RESET = 0, WAIT_AEC_REQ = 1, WAIT_DYN_DWNLD = 2, WAIT_AEC_CON = 3 }; UWORD8 *state = &l1a.state[L1A_AEC_STATE]; UWORD32 SignalCode = msg->SignalCode; while(1) { switch(*state) { case RESET: { // Reset the command l1a_l1s_com.aec_task.command.start = FALSE; *state = WAIT_AEC_REQ; } break; case WAIT_AEC_REQ: { if (SignalCode == MMI_AEC_REQ) { // Load the message into the l1a_l1s_com memory. l1a_l1s_com.aec_task.parameters.aec_control = ((T_MMI_AEC_REQ *)(msg->SigP))->aec_control; #if (L1_NEW_AEC) l1a_l1s_com.aec_task.parameters.cont_filter = ((T_MMI_AEC_REQ *)(msg->SigP))->cont_filter; l1a_l1s_com.aec_task.parameters.granularity_att = ((T_MMI_AEC_REQ *)(msg->SigP))->granularity_att; l1a_l1s_com.aec_task.parameters.coef_smooth = ((T_MMI_AEC_REQ *)(msg->SigP))->coef_smooth; l1a_l1s_com.aec_task.parameters.es_level_max = ((T_MMI_AEC_REQ *)(msg->SigP))->es_level_max; l1a_l1s_com.aec_task.parameters.fact_vad = ((T_MMI_AEC_REQ *)(msg->SigP))->fact_vad; l1a_l1s_com.aec_task.parameters.thrs_abs = ((T_MMI_AEC_REQ *)(msg->SigP))->thrs_abs; l1a_l1s_com.aec_task.parameters.fact_asd_fil = ((T_MMI_AEC_REQ *)(msg->SigP))->fact_asd_fil; l1a_l1s_com.aec_task.parameters.fact_asd_mut = ((T_MMI_AEC_REQ *)(msg->SigP))->fact_asd_mut; #endif #if (L1_ANR == 1) if (l1a_l1s_com.aec_task.parameters.aec_control & 0x0004) { // Noise suppression enabled: enable new ANR module for backward compatibility l1a_l1s_com.aec_task.parameters.aec_control &= ~(0x0104); // Clear noise suppression bits in AEC control // Enable L1S ANR task (default settings are used) l1a_l1s_com.anr_task.parameters.anr_enable = 1; l1a_l1s_com.anr_task.parameters.min_gain = 0x3313; l1a_l1s_com.anr_task.parameters.div_factor_shift = -2; l1a_l1s_com.anr_task.parameters.ns_level = 1; l1a_l1s_com.anr_task.command.update = TRUE; // Here we do not wait for L1S confirmation to have simple implementation // because the state machine already wait for AEC confirmation and // ANR confirmation would occur on the same frame } else { // Noise suppression disabled: disable ANR l1a_l1s_com.anr_task.parameters.anr_enable = 0; l1a_l1s_com.anr_task.command.update = TRUE; // Here we do not wait for L1S confirmation to have simple implementation // because the state machine already wait for AEC confirmation and // ANR confirmation would occur on the same frame } #endif if (l1a.dyn_dwnld.semaphore_vect[ANR_STATE_MACHINE] == GREEN) { // WARNING: The following code must be duplicated in WAIT_DYN_DWNLD state when // activating the command at L1s level // Start the L1S AEC task l1a_l1s_com.aec_task.command.start = TRUE; *state = WAIT_AEC_CON; } else { *state = WAIT_DYN_DWNLD; #if ((TRACE_TYPE == 1) || (TRACE_TYPE == 4) || (TRACE_TYPE == 5)) if((trace_info.current_config->l1_dyn_trace) & (1<<L1_DYN_TRACE_DYN_DWNLD)) { char str[30]; sprintf(str,"AEC SM blocked by DYN DWNLD\r\n"); #if(CODE_VERSION == SIMULATION) trace_fct_simu_dyn_dwnld(str); #else rvt_send_trace_cpy((T_RVT_BUFFER)str,trace_info.l1_trace_user_id,strlen(str),RVT_ASCII_FORMAT); #endif } #endif // (TRACE_TYPE == 1) || (TRACE_TYPE == 4) } } // End process return; } break; case WAIT_DYN_DWNLD: { if (SignalCode == API_L1_DYN_DWNLD_FINISHED && l1a.dyn_dwnld.semaphore_vect[ANR_STATE_MACHINE] == GREEN) { // Start the L1S AEC task l1a_l1s_com.aec_task.command.start = TRUE; *state = WAIT_AEC_CON; #if ((TRACE_TYPE == 1) || (TRACE_TYPE == 4) || (TRACE_TYPE == 5)) if((trace_info.current_config->l1_dyn_trace) & (1<<L1_DYN_TRACE_DYN_DWNLD)) { char str[30]; sprintf(str,"AEC SM un-blocked\r\n"); #if(CODE_VERSION == SIMULATION) trace_fct_simu_dyn_dwnld(str); #else rvt_send_trace_cpy((T_RVT_BUFFER)str,trace_info.l1_trace_user_id,strlen(str),RVT_ASCII_FORMAT); #endif } #endif // (TRACE_TYPE == 1) || (TRACE_TYPE == 4) } return; } break; case WAIT_AEC_CON: { if (SignalCode == L1_AEC_CON) { // Send the AEC confirmation message l1a_audio_send_confirmation(MMI_AEC_CON); *state = RESET; } else { // End process return; } } break; } // switch } // while(1) } #else void l1a_mmi_aec_process(xSignalHeaderRec *msg) { enum states { RESET = 0, WAIT_AEC_REQ = 1, WAIT_AEC_CON = 2 }; UWORD8 *state = &l1a.state[L1A_AEC_STATE]; UWORD32 SignalCode = msg->SignalCode; while(1) { switch(*state) { case RESET: { // Reset the command l1a_l1s_com.aec_task.command.start = FALSE; *state = WAIT_AEC_REQ; } break; case WAIT_AEC_REQ: { if (SignalCode == MMI_AEC_REQ) { // Load the message into the l1a_l1s_com memory. l1a_l1s_com.aec_task.parameters.aec_control = ((T_MMI_AEC_REQ *)(msg->SigP))->aec_control; #if (L1_NEW_AEC) l1a_l1s_com.aec_task.parameters.cont_filter = ((T_MMI_AEC_REQ *)(msg->SigP))->cont_filter; l1a_l1s_com.aec_task.parameters.granularity_att = ((T_MMI_AEC_REQ *)(msg->SigP))->granularity_att; l1a_l1s_com.aec_task.parameters.coef_smooth = ((T_MMI_AEC_REQ *)(msg->SigP))->coef_smooth; l1a_l1s_com.aec_task.parameters.es_level_max = ((T_MMI_AEC_REQ *)(msg->SigP))->es_level_max; l1a_l1s_com.aec_task.parameters.fact_vad = ((T_MMI_AEC_REQ *)(msg->SigP))->fact_vad; l1a_l1s_com.aec_task.parameters.thrs_abs = ((T_MMI_AEC_REQ *)(msg->SigP))->thrs_abs; l1a_l1s_com.aec_task.parameters.fact_asd_fil = ((T_MMI_AEC_REQ *)(msg->SigP))->fact_asd_fil; l1a_l1s_com.aec_task.parameters.fact_asd_mut = ((T_MMI_AEC_REQ *)(msg->SigP))->fact_asd_mut; #endif #if (L1_ANR == 1) if (l1a_l1s_com.aec_task.parameters.aec_control & 0x0004) { // Noise suppression enabled: enable new ANR module for backward compatibility l1a_l1s_com.aec_task.parameters.aec_control &= ~(0x0104); // Clear noise suppression bits in AEC control // Enable L1S ANR task (default settings are used) l1a_l1s_com.anr_task.parameters.anr_enable = 1; l1a_l1s_com.anr_task.parameters.min_gain = 0x3313; l1a_l1s_com.anr_task.parameters.div_factor_shift = -2; l1a_l1s_com.anr_task.parameters.ns_level = 1; l1a_l1s_com.anr_task.command.update = TRUE; // Here we do not wait for L1S confirmation to have simple implementation // because the state machine already wait for AEC confirmation and // ANR confirmation would occur on the same frame } else { // Noise suppression disabled: disable ANR l1a_l1s_com.anr_task.parameters.anr_enable = 0; l1a_l1s_com.anr_task.command.update = TRUE; // Here we do not wait for L1S confirmation to have simple implementation // because the state machine already wait for AEC confirmation and // ANR confirmation would occur on the same frame } #endif // Start the L1S AEC task l1a_l1s_com.aec_task.command.start = TRUE; *state = WAIT_AEC_CON; } // End process return; } break; case WAIT_AEC_CON: { if (SignalCode == L1_AEC_CON) { // Send the AEC confirmation message l1a_audio_send_confirmation(MMI_AEC_CON); *state = RESET; } else { // End process return; } } break; } // switch } // while(1) } #endif // L1_DYN_DSP_DWNLD == 1 #endif // AEC #if (AEC == 2) /*-------------------------------------------------------*/ /* l1a_mmi_aec_process() */ /*-------------------------------------------------------*/ /* */ /* Description: */ /* ------------ */ /* This function is a state machine which handles the */ /* AEC feature. */ /* */ /* Starting messages: MMI_AEC_REQ */ /* */ /* Result messages (input): none */ /* */ /* Result messages (output): MMI_AEC_CON */ /* */ /* Reset messages (input): none */ /* */ /* Stop message (input): none */ /* */ /* Stop message (output): none */ /* */ /* Rem: */ /* ---- */ /* */ /*-------------------------------------------------------*/ #if 0 //(L1_DYN_DSP_DWNLD == 1) void l1a_mmi_aec_process(xSignalHeaderRec *msg) { enum states { RESET = 0, WAIT_AEC_REQ = 1, WAIT_DYN_DWNLD = 2, WAIT_AEC_CON = 3 }; UWORD8 *state = &l1a.state[L1A_AEC_STATE]; UWORD32 SignalCode = msg->SignalCode; while(1) { switch(*state) { case RESET: { // Reset the command l1a_l1s_com.aec_task.command.start = FALSE; *state = WAIT_AEC_REQ; } break; case WAIT_AEC_REQ: { if (SignalCode == MMI_AQI_AEC_REQ) { // Load the message into the l1a_l1s_com memory. l1a_l1s_com.aec_task.aec_control = ((T_MMI_AQI_AEC_REQ *)(msg->SigP))->aec_control; if(l1a_l1s_com.aec_task.aec_control != L1_AQI_AEC_STOP) { l1a_l1s_com.aec_task.parameters.cont_filter = ((T_MMI_AQI_AEC_REQ *)(msg->SigP))->aec_parameters.cont_filter; l1a_l1s_com.aec_task.parameters.granularity_att = ((T_MMI_AQI_AEC_REQ *)(msg->SigP))->aec_parameters.granularity_att; l1a_l1s_com.aec_task.parameters.coef_smooth = ((T_MMI_AQI_AEC_REQ *)(msg->SigP))->aec_parameters.coef_smooth; l1a_l1s_com.aec_task.parameters.es_level_max = ((T_MMI_AQI_AEC_REQ *)(msg->SigP))->aec_parameters.es_level_max; l1a_l1s_com.aec_task.parameters.fact_vad = ((T_MMI_AQI_AEC_REQ *)(msg->SigP))->aec_parameters.fact_vad; l1a_l1s_com.aec_task.parameters.thrs_abs = ((T_MMI_AQI_AEC_REQ *)(msg->SigP))->aec_parameters.thrs_abs; l1a_l1s_com.aec_task.parameters.fact_asd_fil = ((T_MMI_AQI_AEC_REQ *)(msg->SigP))->aec_parameters.fact_asd_fil; l1a_l1s_com.aec_task.parameters.fact_asd_mut = ((T_MMI_AQI_AEC_REQ *)(msg->SigP))->aec_parameters.fact_asd_mut; l1a_l1s_com.aec_task.parameters.aec_mode = ((T_MMI_AQI_AEC_REQ *)(msg->SigP))->aec_parameters.aec_mode; l1a_l1s_com.aec_task.parameters.mu = ((T_MMI_AQI_AEC_REQ *)(msg->SigP))->aec_parameters.mu; l1a_l1s_com.aec_task.parameters.scale_input_ul = ((T_MMI_AQI_AEC_REQ *)(msg->SigP))->aec_parameters.scale_input_ul; l1a_l1s_com.aec_task.parameters.scale_input_dl = ((T_MMI_AQI_AEC_REQ *)(msg->SigP))->aec_parameters.scale_input_dl; l1a_l1s_com.aec_task.parameters.div_dmax = ((T_MMI_AQI_AEC_REQ *)(msg->SigP))->aec_parameters.div_dmax; l1a_l1s_com.aec_task.parameters.div_swap_good = ((T_MMI_AQI_AEC_REQ *)(msg->SigP))->aec_parameters.div_swap_good; l1a_l1s_com.aec_task.parameters.div_swap_bad = ((T_MMI_AQI_AEC_REQ *)(msg->SigP))->aec_parameters.div_swap_bad; l1a_l1s_com.aec_task.parameters.block_init = ((T_MMI_AQI_AEC_REQ *)(msg->SigP))->aec_parameters.block_init; // l1a_l1s_com.aec_task.parameters.block_size = ((T_MMI_AQI_AEC_REQ *)(msg->SigP))->aec_parameters.block_size; } if (l1a.dyn_dwnld.semaphore_vect[AEC_STATE_MACHINE] == GREEN) { // WARNING: The following code must be duplicated in WAIT_DYN_DWNLD state when // activating the command at L1s level // Start the L1S AEC task l1a_l1s_com.aec_task.command.start = TRUE; *state = WAIT_AEC_CON; } else { *state = WAIT_DYN_DWNLD; #if ((TRACE_TYPE == 1) || (TRACE_TYPE == 4) || (TRACE_TYPE == 5)) if((trace_info.current_config->l1_dyn_trace) & (1<<L1_DYN_TRACE_DYN_DWNLD)) { char str[30]; sprintf(str,"AEC SM blocked by DYN DWNLD\r\n"); #if(CODE_VERSION == SIMULATION) trace_fct_simu_dyn_dwnld(str); #else rvt_send_trace_cpy((T_RVT_BUFFER)str,trace_info.l1_trace_user_id,strlen(str),RVT_ASCII_FORMAT); #endif } #endif // (TRACE_TYPE == 1) || (TRACE_TYPE == 4) } } // End process return; } // omaps00090550 break; case WAIT_DYN_DWNLD: { if (SignalCode == API_L1_DYN_DWNLD_FINISHED && l1a.dyn_dwnld.semaphore_vect[ANR_STATE_MACHINE] == GREEN) { // Start the L1S AEC task l1a_l1s_com.aec_task.command.start = TRUE; *state = WAIT_AEC_CON; #if ((TRACE_TYPE == 1) || (TRACE_TYPE == 4) || (TRACE_TYPE == 5)) if((trace_info.current_config->l1_dyn_trace) & (1<<L1_DYN_TRACE_DYN_DWNLD)) { char str[30]; sprintf(str,"AEC SM un-blocked\r\n"); #if(CODE_VERSION == SIMULATION) trace_fct_simu_dyn_dwnld(str); #else rvt_send_trace_cpy((T_RVT_BUFFER)str,trace_info.l1_trace_user_id,strlen(str),RVT_ASCII_FORMAT); #endif } #endif // (TRACE_TYPE == 1) || (TRACE_TYPE == 4) } return; } // omaps00090550 break; case WAIT_AEC_CON: { if (SignalCode == L1_AQI_AEC_CON) { // Send the AEC confirmation message l1a_audio_send_result(MMI_AQI_AEC_CON, msg, MMI_QUEUE); *state = RESET; } else { // End process return; } } break; } // switch } // while(1) } #else void l1a_mmi_aec_process(xSignalHeaderRec *msg) { enum states { RESET = 0, WAIT_AEC_REQ = 1, WAIT_AEC_CON = 2 }; UWORD8 *state = &l1a.state[L1A_AEC_STATE]; UWORD32 SignalCode = msg->SignalCode; while(1) { switch(*state) { case RESET: { // Reset the command l1a_l1s_com.aec_task.command.start = FALSE; *state = WAIT_AEC_REQ; } break; case WAIT_AEC_REQ: { if (SignalCode == MMI_AQI_AEC_REQ) { // Load the message into the l1a_l1s_com memory. l1a_l1s_com.aec_task.aec_control = ((T_MMI_AQI_AEC_REQ *)(msg->SigP))->aec_control; if(l1a_l1s_com.aec_task.aec_control != L1_AQI_AEC_STOP) { l1a_l1s_com.aec_task.parameters.cont_filter = ((T_MMI_AQI_AEC_REQ *)(msg->SigP))->aec_parameters.cont_filter; l1a_l1s_com.aec_task.parameters.granularity_att = ((T_MMI_AQI_AEC_REQ *)(msg->SigP))->aec_parameters.granularity_att; l1a_l1s_com.aec_task.parameters.coef_smooth = ((T_MMI_AQI_AEC_REQ *)(msg->SigP))->aec_parameters.coef_smooth; l1a_l1s_com.aec_task.parameters.es_level_max = ((T_MMI_AQI_AEC_REQ *)(msg->SigP))->aec_parameters.es_level_max; l1a_l1s_com.aec_task.parameters.fact_vad = ((T_MMI_AQI_AEC_REQ *)(msg->SigP))->aec_parameters.fact_vad; l1a_l1s_com.aec_task.parameters.thrs_abs = ((T_MMI_AQI_AEC_REQ *)(msg->SigP))->aec_parameters.thrs_abs; l1a_l1s_com.aec_task.parameters.fact_asd_fil = ((T_MMI_AQI_AEC_REQ *)(msg->SigP))->aec_parameters.fact_asd_fil; l1a_l1s_com.aec_task.parameters.fact_asd_mut = ((T_MMI_AQI_AEC_REQ *)(msg->SigP))->aec_parameters.fact_asd_mut; l1a_l1s_com.aec_task.parameters.aec_mode = ((T_MMI_AQI_AEC_REQ *)(msg->SigP))->aec_parameters.aec_mode; l1a_l1s_com.aec_task.parameters.mu = ((T_MMI_AQI_AEC_REQ *)(msg->SigP))->aec_parameters.mu; l1a_l1s_com.aec_task.parameters.scale_input_ul = ((T_MMI_AQI_AEC_REQ *)(msg->SigP))->aec_parameters.scale_input_ul; l1a_l1s_com.aec_task.parameters.scale_input_dl = ((T_MMI_AQI_AEC_REQ *)(msg->SigP))->aec_parameters.scale_input_dl; l1a_l1s_com.aec_task.parameters.div_dmax = ((T_MMI_AQI_AEC_REQ *)(msg->SigP))->aec_parameters.div_dmax; l1a_l1s_com.aec_task.parameters.div_swap_good = ((T_MMI_AQI_AEC_REQ *)(msg->SigP))->aec_parameters.div_swap_good; l1a_l1s_com.aec_task.parameters.div_swap_bad = ((T_MMI_AQI_AEC_REQ *)(msg->SigP))->aec_parameters.div_swap_bad; l1a_l1s_com.aec_task.parameters.block_init = ((T_MMI_AQI_AEC_REQ *)(msg->SigP))->aec_parameters.block_init; // l1a_l1s_com.aec_task.parameters.block_size = ((T_MMI_AQI_AEC_REQ *)(msg->SigP))->aec_parameters.block_size; } #if (L1_ANR == 1) if (l1a_l1s_com.aec_task.aec_control & 0x0004) { // Noise suppression enabled: enable new ANR module for backward compatibility l1a_l1s_com.aec_task.aec_control &= ~(0x0104); // Clear noise suppression bits in AEC control // Enable L1S ANR task (default settings are used) l1a_l1s_com.anr_task.parameters.anr_enable = 1; l1a_l1s_com.anr_task.parameters.min_gain = 0x3313; l1a_l1s_com.anr_task.parameters.div_factor_shift = -2; l1a_l1s_com.anr_task.parameters.ns_level = 1; l1a_l1s_com.anr_task.command.update = TRUE; // Here we do not wait for L1S confirmation to have simple implementation // because the state machine already wait for AEC confirmation and // ANR confirmation would occur on the same frame } else { // Noise suppression disabled: disable ANR l1a_l1s_com.anr_task.parameters.anr_enable = 0; l1a_l1s_com.anr_task.command.update = TRUE; // Here we do not wait for L1S confirmation to have simple implementation // because the state machine already wait for AEC confirmation and // ANR confirmation would occur on the same frame } #endif // Start the L1S AEC task l1a_l1s_com.aec_task.command.start = TRUE; *state = WAIT_AEC_CON; } // End process return; } break; case WAIT_AEC_CON: { if (SignalCode == L1_AQI_AEC_CON) { // Send the AEC confirmation message l1a_audio_send_result(MMI_AQI_AEC_CON, msg, MMI_QUEUE); *state = RESET; } else { // End process return; } } break; } // switch } // while(1) } #endif // L1_DYN_DSP_DWNLD == 1 #endif // AEC == 2 #if (FIR) /*-------------------------------------------------------*/ /* l1a_mmi_fir_process() */ /*-------------------------------------------------------*/ /* */ /* Description: */ /* ------------ */ /* This function is a state machine which handles the */ /* FIR feature. */ /* */ /* Starting messages: MMI_AUDIO_FIR_REQ */ /* */ /* Result messages (input): none */ /* */ /* Result messages (output): MMI_AUDIO_FIR_CON */ /* */ /* Reset messages (input): none */ /* */ /* Stop message (input): none */ /* */ /* Stop message (output): none */ /* */ /* Rem: */ /* ---- */ /* */ /*-------------------------------------------------------*/ void l1a_mmi_fir_process(xSignalHeaderRec *msg) { enum states { RESET = 0, WAIT_FIR_REQ = 1, WAIT_FIR_CON = 2 }; UWORD8 *state = &l1a.state[L1A_FIR_STATE]; UWORD32 SignalCode = msg->SignalCode; while(1) { switch(*state) { case RESET: { // Reset the command l1a_l1s_com.fir_task.command.start = FALSE; *state = WAIT_FIR_REQ; } break; case WAIT_FIR_REQ: { if (SignalCode == MMI_AUDIO_FIR_REQ) { // Load the message into the l1a_l1s_com memory. l1a_l1s_com.fir_task.parameters.fir_loop = ((T_MMI_AUDIO_FIR_REQ *)(msg->SigP))->fir_loop; l1a_l1s_com.fir_task.parameters.update_fir = ((T_MMI_AUDIO_FIR_REQ *)(msg->SigP))->update_fir; l1a_l1s_com.fir_task.parameters.fir_ul_coefficient = ((T_MMI_AUDIO_FIR_REQ *)(msg->SigP))->fir_ul_coefficient; // we update FIR coefficients even if L1_IIR==1 because in case of loop mode // this is the old FIR API that is used l1a_l1s_com.fir_task.parameters.fir_dl_coefficient = ((T_MMI_AUDIO_FIR_REQ *)(msg->SigP))->fir_dl_coefficient; #if (L1_IIR == 1) if (l1a_l1s_com.fir_task.parameters.update_fir & DL_FIR) { // FIR DL update enabled: enable new IIR/DL module for backward compatibility // Enable L1S IIR task // Settings tuned to have same behavior as DL FIR l1a_l1s_com.iir_task.parameters.iir_enable = 1; // Filter always enabled l1a_l1s_com.iir_task.parameters.nb_iir_blocks = 0; // IIR part disabled l1a_l1s_com.iir_task.parameters.iir_coefs = 0; l1a_l1s_com.iir_task.parameters.nb_fir_coefs = 0x1f; l1a_l1s_com.iir_task.parameters.fir_coefs = (WORD16 *)((T_MMI_AUDIO_FIR_REQ *)(msg->SigP))->fir_dl_coefficient; l1a_l1s_com.iir_task.parameters.input_scaling = 0; l1a_l1s_com.iir_task.parameters.fir_scaling = 0; l1a_l1s_com.iir_task.parameters.input_gain_scaling = 0; l1a_l1s_com.iir_task.parameters.output_gain_scaling = 0; l1a_l1s_com.iir_task.parameters.output_gain = 0xffff; // Used for IIR using in FIR mode l1a_l1s_com.iir_task.parameters.feedback = 0; l1a_l1s_com.iir_task.command.update = TRUE; // Here we do not wait for L1S confirmation to have simple implementation // because the state machine already wait for FIR confirmation and // there is no chance that upper layer frees the memory used to store // DL coefficients before L1S copy them into API } #endif // Start the L1S FIR task l1a_l1s_com.fir_task.command.start = TRUE; *state = WAIT_FIR_CON; } // End process return; } // omaps00090550 break; case WAIT_FIR_CON: { if (SignalCode == L1_AUDIO_FIR_CON) { // Send the FIR confirmation message l1a_audio_send_confirmation(MMI_AUDIO_FIR_CON); *state = RESET; } else { // End process return; } } break; } // switch } // while(1) } #endif // FIR #if (AUDIO_MODE) /*-------------------------------------------------------*/ /* l1a_mmi_audio_mode_process() */ /*-------------------------------------------------------*/ /* */ /* Description: */ /* ------------ */ /* This function is a state machine which handles the */ /* audio mode features. */ /* */ /* Starting messages: MMI_AUDIO_MODE_REQ */ /* */ /* Result messages (input): none */ /* */ /* Result messages (output): MMI_AUDIO_MODE_CON */ /* */ /* Reset messages (input): none */ /* */ /* Stop message (input): none */ /* */ /* Stop message (output): none */ /* */ /* Rem: */ /* ---- */ /* */ /*-------------------------------------------------------*/ void l1a_mmi_audio_mode_process (xSignalHeaderRec *msg) { enum states { RESET = 0, WAIT_AUDIO_MODE_REQ = 1, WAIT_AUDIO_MODE_CON = 2 }; UWORD8 *state = &l1a.state[L1A_AUDIO_MODE_STATE]; UWORD32 SignalCode = msg->SignalCode; while(1) { switch(*state) { case RESET: { // Reset the command l1a_l1s_com.audio_mode_task.command.start = FALSE; *state = WAIT_AUDIO_MODE_REQ; } break; case WAIT_AUDIO_MODE_REQ: { if (SignalCode == MMI_AUDIO_MODE_REQ) { switch (((T_MMI_AUDIO_MODE *)(msg->SigP))->audio_mode) { case GSM_ONLY: { // Set the GSM only mode l1a_l1s_com.audio_mode_task.parameters.audio_mode = B_GSM_ONLY; break; } case BT_CORDLESS: { // Set the bluetooth cordless mode l1a_l1s_com.audio_mode_task.parameters.audio_mode = B_BT_CORDLESS; break; } case BT_HEADSET: { // Set the bluetooth headset mode l1a_l1s_com.audio_mode_task.parameters.audio_mode = B_BT_HEADSET; break; } default : { break; } } // switch // Start the L1S AUDIO MODE task l1a_l1s_com.audio_mode_task.command.start = TRUE; *state = WAIT_AUDIO_MODE_CON; } // End process return; } // omaps00090550 break; case WAIT_AUDIO_MODE_CON: { if (SignalCode == L1_AUDIO_MODE_CON) { // Send the AUDIO MODE confirmation message l1a_audio_send_confirmation(MMI_AUDIO_MODE_CON); *state = RESET; } else { // End process return; } } break; } // switch } // while(1) } #endif // AUDIO_MODE #if (MELODY_E2) #if(L1_DYN_DSP_DWNLD==1) /*-------------------------------------------------------*/ /* l1a_mmi_melody0_e2_process() */ /*-------------------------------------------------------*/ /* */ /* Description: */ /* ------------ */ /* This function is a state machine which handles the */ /* melody 0 format E2 feature. */ /* */ /* Starting messages: MMI_MELODY0_E2_START_REQ */ /* */ /* Result messages (input): L1_MELODY0_E2_START_CON */ /* */ /* Result messages (output): MMI_MELODY0_E2_START_CON */ /* */ /* Reset messages (input): none */ /* */ /* Stop message (input): MMI_MELDOY0_E2_STOP_REQ */ /* L1_MELODY0_E2_STOP_CON */ /* */ /* Stop message (output): MMI_MELODY0_E2_STOP_CON */ /* */ /* Rem: */ /* ---- */ /* */ /*-------------------------------------------------------*/ void l1a_mmi_melody0_e2_process(xSignalHeaderRec *msg) { enum states { M0_RESET = 0, M0_WAIT_START_REQ = 1, WAIT_DYN_DWNLD = 2, M0_WAIT_LOAD_INSTRUMENT = 3, M0_WAIT_STOP = 4, M0_WAIT_UNLOAD_INSTRUMENT = 5 }; UWORD8 *state = &l1a.state[L1A_MELODY0_E2_STATE], i; UWORD32 SignalCode = msg->SignalCode; while(1) { switch(*state) { case M0_RESET: { // Reset the commands: l1a_l1s_com.melody0_e2_task.command.start = FALSE; l1a_l1s_com.melody0_e2_task.command.stop = FALSE; *state = M0_WAIT_START_REQ; } break; case M0_WAIT_START_REQ: { if (SignalCode == MMI_MELODY0_E2_START_REQ) { // Download the parameters from the message: l1a_l1s_com.melody0_e2_task.parameters.session_id = ((T_MMI_MELODY_E2_REQ *)(msg->SigP))->session_id; l1a_l1s_com.melody0_e2_task.parameters.loopback = ((T_MMI_MELODY_E2_REQ *)(msg->SigP))->loopback; if(l1a.dyn_dwnld.semaphore_vect[E2_STATE_MACHINE]==GREEN) { // WARNING: code below must be duplicated in WAIT_DYN_DWNLD state #if 0 //((TRACE_TYPE==1) || (TRACE_TYPE == 4)) // Disable trace DSP upon E2 MELODY activation l1_disable_dsp_trace(); #endif // Reset the emergency flag l1a_l1s_com.melody0_e2_task.parameters.emergency_stop = FALSE; // Initialize the buffer parameters l1a_l1s_com.melody0_e2_task.parameters.ptr_buf = NULL; l1a_l1s_com.melody0_e2_task.parameters.buffer_size = 0; l1a_l1s_com.melody0_e2_task.parameters.error_id = Cust_get_pointer((UWORD16 **)&l1a_l1s_com.melody0_e2_task.parameters.ptr_buf, &l1a_l1s_com.melody0_e2_task.parameters.buffer_size, l1a_l1s_com.melody0_e2_task.parameters.session_id); // Convert the buffer size in bytes unit because the E2 melody is defined in byte unit l1a_l1s_com.melody0_e2_task.parameters.buffer_size <<= 1; // Jump the NumberOfOscillator parameter l1a_l1s_com.melody0_e2_task.parameters.error_id = copy_byte_data_from_buffer (l1a_l1s_com.melody0_e2_task.parameters.session_id, &l1a_l1s_com.melody0_e2_task.parameters.buffer_size, (UWORD8 **)&l1a_l1s_com.melody0_e2_task.parameters.ptr_buf, 1, (UWORD8 *)(&(i))); // Read the Header of the melody description in order to download the time factor // clean the MSB of the global time factor register l1s_dsp_com.dsp_ndb_ptr->d_melody_e2_globaltimefactor &= 0x00FF; l1a_l1s_com.melody0_e2_task.parameters.error_id = copy_byte_data_from_buffer (l1a_l1s_com.melody0_e2_task.parameters.session_id, &l1a_l1s_com.melody0_e2_task.parameters.buffer_size, (UWORD8 **)&l1a_l1s_com.melody0_e2_task.parameters.ptr_buf, 1, (UWORD8 *)(&(i))); l1s_dsp_com.dsp_ndb_ptr->d_melody_e2_globaltimefactor = i; // Find the number of insturment of the melody (jump the header memory) l1a_l1s_com.melody0_e2_task.parameters.error_id = copy_byte_data_from_buffer (l1a_l1s_com.melody0_e2_task.parameters.session_id, &l1a_l1s_com.melody0_e2_task.parameters.buffer_size, (UWORD8 **)&l1a_l1s_com.melody0_e2_task.parameters.ptr_buf, 1, &(l1a_l1s_com.melody0_e2_task.parameters.number_of_instrument)); for (i=0; i<(l1a_l1s_com.melody0_e2_task.parameters.number_of_instrument); i++) { // find the beginning of the melody description (after the header field) // and put it in the buf_ptr buffer l1a_l1s_com.melody0_e2_task.parameters.error_id = copy_byte_data_from_buffer (l1a_l1s_com.melody0_e2_task.parameters.session_id, &l1a_l1s_com.melody0_e2_task.parameters.buffer_size, (UWORD8 **)&l1a_l1s_com.melody0_e2_task.parameters.ptr_buf, 1, &(l1a_l1s_com.melody0_e2_task.parameters.waves_table_id[i])); } // Initialize the size (in byte unit) of the header l1a_l1s_com.melody0_e2_task.parameters.header_size = 3 + l1a_l1s_com.melody0_e2_task.parameters.number_of_instrument; // download the instrument l1_send_melody_e2_background_msg(L1_BACK_MELODY_E2_LOAD_INSTRUMENT_REQ, 0); // Send the start confirmation message l1a_audio_send_confirmation(MMI_MELODY0_E2_START_CON); *state = M0_WAIT_LOAD_INSTRUMENT; } else { *state = WAIT_DYN_DWNLD; #if ((TRACE_TYPE == 1) || (TRACE_TYPE == 4) || (TRACE_TYPE == 5)) if((trace_info.current_config->l1_dyn_trace) & (1<<L1_DYN_TRACE_DYN_DWNLD)) { char str[30]; sprintf(str,"E20 SM blocked by DYN DWNLD\r\n"); #if(CODE_VERSION == SIMULATION) trace_fct_simu_dyn_dwnld(str); #else rvt_send_trace_cpy((T_RVT_BUFFER)str,trace_info.l1_trace_user_id,strlen(str),RVT_ASCII_FORMAT); #endif } #endif // (TRACE_TYPE == 1) || (TRACE_TYPE == 4) } } return; } break; case WAIT_DYN_DWNLD: { if((SignalCode == API_L1_DYN_DWNLD_FINISHED) && (l1a.dyn_dwnld.semaphore_vect[E2_STATE_MACHINE] == GREEN)) { // Reset the emergency flag l1a_l1s_com.melody0_e2_task.parameters.emergency_stop = FALSE; // Initialize the buffer parameters l1a_l1s_com.melody0_e2_task.parameters.ptr_buf = NULL; l1a_l1s_com.melody0_e2_task.parameters.buffer_size = 0; l1a_l1s_com.melody0_e2_task.parameters.error_id = Cust_get_pointer((UWORD16 **)&l1a_l1s_com.melody0_e2_task.parameters.ptr_buf, &l1a_l1s_com.melody0_e2_task.parameters.buffer_size, l1a_l1s_com.melody0_e2_task.parameters.session_id); // Convert the buffer size in bytes unit because the E2 melody is defined in byte unit l1a_l1s_com.melody0_e2_task.parameters.buffer_size <<= 1; // Jump the NumberOfOscillator parameter l1a_l1s_com.melody0_e2_task.parameters.error_id = copy_byte_data_from_buffer (l1a_l1s_com.melody0_e2_task.parameters.session_id, &l1a_l1s_com.melody0_e2_task.parameters.buffer_size, (UWORD8 **)&l1a_l1s_com.melody0_e2_task.parameters.ptr_buf, 1, (UWORD8 *)(&(i))); // Read the Header of the melody description in order to download the time factor // clean the MSB of the global time factor register l1s_dsp_com.dsp_ndb_ptr->d_melody_e2_globaltimefactor &= 0x00FF; l1a_l1s_com.melody0_e2_task.parameters.error_id = copy_byte_data_from_buffer (l1a_l1s_com.melody0_e2_task.parameters.session_id, &l1a_l1s_com.melody0_e2_task.parameters.buffer_size, (UWORD8 **)&l1a_l1s_com.melody0_e2_task.parameters.ptr_buf, 1, (UWORD8 *)(&(i))); l1s_dsp_com.dsp_ndb_ptr->d_melody_e2_globaltimefactor = i; // Find the number of insturment of the melody (jump the header memory) l1a_l1s_com.melody0_e2_task.parameters.error_id = copy_byte_data_from_buffer (l1a_l1s_com.melody0_e2_task.parameters.session_id, &l1a_l1s_com.melody0_e2_task.parameters.buffer_size, (UWORD8 **)&l1a_l1s_com.melody0_e2_task.parameters.ptr_buf, 1, &(l1a_l1s_com.melody0_e2_task.parameters.number_of_instrument)); for (i=0; i<(l1a_l1s_com.melody0_e2_task.parameters.number_of_instrument); i++) { // find the beginning of the melody description (after the header field) // and put it in the buf_ptr buffer l1a_l1s_com.melody0_e2_task.parameters.error_id = copy_byte_data_from_buffer (l1a_l1s_com.melody0_e2_task.parameters.session_id, &l1a_l1s_com.melody0_e2_task.parameters.buffer_size, (UWORD8 **)&l1a_l1s_com.melody0_e2_task.parameters.ptr_buf, 1, &(l1a_l1s_com.melody0_e2_task.parameters.waves_table_id[i])); } // Initialize the size (in byte unit) of the header l1a_l1s_com.melody0_e2_task.parameters.header_size = 3 + l1a_l1s_com.melody0_e2_task.parameters.number_of_instrument; // download the instrument l1_send_melody_e2_background_msg(L1_BACK_MELODY_E2_LOAD_INSTRUMENT_REQ, 0); // Send the start confirmation message l1a_audio_send_confirmation(MMI_MELODY0_E2_START_CON); *state = M0_WAIT_LOAD_INSTRUMENT; #if ((TRACE_TYPE == 1) || (TRACE_TYPE == 4) || (TRACE_TYPE == 5)) if((trace_info.current_config->l1_dyn_trace) & (1<<L1_DYN_TRACE_DYN_DWNLD)) { char str[30]; sprintf(str,"E20 SM un-blocked\r\n"); #if(CODE_VERSION == SIMULATION) trace_fct_simu_dyn_dwnld(str); #else rvt_send_trace_cpy((T_RVT_BUFFER)str,trace_info.l1_trace_user_id,strlen(str),RVT_ASCII_FORMAT); #endif } #endif // (TRACE_TYPE == 1) || (TRACE_TYPE == 4) } return; } break; case M0_WAIT_LOAD_INSTRUMENT: { if (SignalCode == L1_BACK_MELODY_E2_LOAD_INSTRUMENT_CON) { if ( ((T_L1_BACK_MELODY_E2_LOAD_INSTRUMENT_REQ *)(msg->SigP))->melody_id == 0 ) { // The load instrument confirmation message is for the melody 0 if (l1a_l1s_com.melody0_e2_task.parameters.emergency_stop) { // Unload the instrument l1_send_melody_e2_background_msg(L1_BACK_MELODY_E2_UNLOAD_INSTRUMENT_REQ, 0); *state = M0_WAIT_UNLOAD_INSTRUMENT; } else { // Start to play the melody0 l1a_l1s_com.melody0_e2_task.command.start = TRUE; *state = M0_WAIT_STOP; } } } else if (SignalCode == MMI_MELODY0_E2_STOP_REQ) { // Set the emergency flag l1a_l1s_com.melody0_e2_task.parameters.emergency_stop = TRUE; } // End process return; } break; case M0_WAIT_STOP: { if (SignalCode == L1_MELODY0_E2_STOP_CON) { // Unload the instrument l1_send_melody_e2_background_msg(L1_BACK_MELODY_E2_UNLOAD_INSTRUMENT_REQ, 0); *state = M0_WAIT_UNLOAD_INSTRUMENT; } else if (SignalCode == MMI_MELODY0_E2_STOP_REQ) { // Stop the melody 0 L1S task: l1a_l1s_com.melody0_e2_task.command.stop = TRUE; } // End process return; } break; case M0_WAIT_UNLOAD_INSTRUMENT: { if (SignalCode == L1_BACK_MELODY_E2_UNLOAD_INSTRUMENT_CON) { if ( ((T_L1_BACK_MELODY_E2_UNLOAD_INSTRUMENT_REQ *)(msg->SigP))->melody_id == 0 ) { // Send the stop confirmation message l1a_audio_send_confirmation(MMI_MELODY0_E2_STOP_CON); #if 0 //((TRACE_TYPE==1) || (TRACE_TYPE == 4)) // Enable trace DSP upon E2 MELODY deactivation l1_enable_dsp_trace(); #endif *state = M0_RESET; } } // End process return; } break; } // switch } // while(1) } /*-------------------------------------------------------*/ /* l1a_mmi_melody1_e2_process() */ /*-------------------------------------------------------*/ /* */ /* Description: */ /* ------------ */ /* This function is a state machine which handles the */ /* melody 1 format E2 feature. */ /* */ /* Starting messages: MMI_MELODY1_E2_START_REQ */ /* */ /* Result messages (input): L1_MELODY1_E2_START_CON */ /* */ /* Result messages (output): MMI_MELODY1_E2_START_CON */ /* */ /* Reset messages (input): none */ /* */ /* Stop message (input): MMI_MELDOY0_E2_STOP_REQ */ /* L1_MELODY1_E2_STOP_CON */ /* */ /* Stop message (output): MMI_MELODY1_E2_STOP_CON */ /* */ /* Rem: */ /* ---- */ /* */ /*-------------------------------------------------------*/ void l1a_mmi_melody1_e2_process(xSignalHeaderRec *msg) { enum states { M1_RESET = 0, M1_WAIT_START_REQ = 1, WAIT_DYN_DWNLD = 2, M1_WAIT_LOAD_INSTRUMENT = 3, M1_WAIT_STOP = 4, M1_WAIT_UNLOAD_INSTRUMENT = 5 }; UWORD8 *state = &l1a.state[L1A_MELODY1_E2_STATE], i; UWORD32 SignalCode = msg->SignalCode; while(1) { switch(*state) { case M1_RESET: { // Reset the commands: l1a_l1s_com.melody1_e2_task.command.start = FALSE; l1a_l1s_com.melody1_e2_task.command.stop = FALSE; *state = M1_WAIT_START_REQ; } break; case M1_WAIT_START_REQ: { if (SignalCode == MMI_MELODY1_E2_START_REQ) { // Download the parameters from the message: l1a_l1s_com.melody1_e2_task.parameters.session_id = ((T_MMI_MELODY_E2_REQ *)(msg->SigP))->session_id; l1a_l1s_com.melody1_e2_task.parameters.loopback = ((T_MMI_MELODY_E2_REQ *)(msg->SigP))->loopback; if(l1a.dyn_dwnld.semaphore_vect[E2_STATE_MACHINE] == GREEN) { // WARNING: code below must be duplicated in WAIT_DYN_DWNLD state #if 0 //((TRACE_TYPE==1) || (TRACE_TYPE == 4)) // Disable trace DSP upon E2 MELODY activation l1_disable_dsp_trace(); #endif // Reset the emergency flag l1a_l1s_com.melody1_e2_task.parameters.emergency_stop = FALSE; // Initialize the buffer parameters l1a_l1s_com.melody1_e2_task.parameters.ptr_buf = NULL; l1a_l1s_com.melody1_e2_task.parameters.buffer_size = 0; l1a_l1s_com.melody1_e2_task.parameters.error_id = Cust_get_pointer((UWORD16 **)&l1a_l1s_com.melody1_e2_task.parameters.ptr_buf, &l1a_l1s_com.melody1_e2_task.parameters.buffer_size, l1a_l1s_com.melody1_e2_task.parameters.session_id); // Convert the buffer size in bytes unit because the E2 melody is defined in byte unit l1a_l1s_com.melody1_e2_task.parameters.buffer_size <<= 1; // Jump the NumberOfOscillator parameter l1a_l1s_com.melody1_e2_task.parameters.error_id = copy_byte_data_from_buffer (l1a_l1s_com.melody1_e2_task.parameters.session_id, &l1a_l1s_com.melody1_e2_task.parameters.buffer_size, (UWORD8 **)&l1a_l1s_com.melody1_e2_task.parameters.ptr_buf, 1, (UWORD8 *)(&(i))); // Read the Header of the melody description in order to download the time factor // clean the MSB of the global time factor register l1s_dsp_com.dsp_ndb_ptr->d_melody_e2_globaltimefactor &= 0x00FF; l1a_l1s_com.melody1_e2_task.parameters.error_id = copy_byte_data_from_buffer (l1a_l1s_com.melody1_e2_task.parameters.session_id, &l1a_l1s_com.melody1_e2_task.parameters.buffer_size, (UWORD8 **)&l1a_l1s_com.melody1_e2_task.parameters.ptr_buf, 1, (UWORD8 *)(&(i))); l1s_dsp_com.dsp_ndb_ptr->d_melody_e2_globaltimefactor = i; // Find the number of insturment of the melody (jump the header memory) l1a_l1s_com.melody1_e2_task.parameters.error_id = copy_byte_data_from_buffer (l1a_l1s_com.melody1_e2_task.parameters.session_id, &l1a_l1s_com.melody1_e2_task.parameters.buffer_size, (UWORD8 **)&l1a_l1s_com.melody1_e2_task.parameters.ptr_buf, 1, &(l1a_l1s_com.melody1_e2_task.parameters.number_of_instrument)); for (i=0; i<(l1a_l1s_com.melody1_e2_task.parameters.number_of_instrument); i++) { // find the beginning of the melody description (after the header field) // and put it in the buf_ptr buffer l1a_l1s_com.melody1_e2_task.parameters.error_id = copy_byte_data_from_buffer (l1a_l1s_com.melody1_e2_task.parameters.session_id, &l1a_l1s_com.melody1_e2_task.parameters.buffer_size, (UWORD8 **)&l1a_l1s_com.melody1_e2_task.parameters.ptr_buf, 1, &(l1a_l1s_com.melody1_e2_task.parameters.waves_table_id[i])); } // Initialize the size (in byte unit) of the header l1a_l1s_com.melody1_e2_task.parameters.header_size = 3 + l1a_l1s_com.melody1_e2_task.parameters.number_of_instrument; // download the instrument l1_send_melody_e2_background_msg(L1_BACK_MELODY_E2_LOAD_INSTRUMENT_REQ, 1); // Send the start confirmation message l1a_audio_send_confirmation(MMI_MELODY1_E2_START_CON); *state = M1_WAIT_LOAD_INSTRUMENT; } else { *state = WAIT_DYN_DWNLD; #if ((TRACE_TYPE == 1) || (TRACE_TYPE == 4) || (TRACE_TYPE == 5)) if((trace_info.current_config->l1_dyn_trace) & (1<<L1_DYN_TRACE_DYN_DWNLD)) { char str[30]; sprintf(str,"E21 SM blocked by DYN DWNLD\r\n"); #if(CODE_VERSION == SIMULATION) trace_fct_simu_dyn_dwnld(str); #else rvt_send_trace_cpy((T_RVT_BUFFER)str,trace_info.l1_trace_user_id,strlen(str),RVT_ASCII_FORMAT); #endif } #endif // (TRACE_TYPE == 1) || (TRACE_TYPE == 4) } } // End process return; } break; case WAIT_DYN_DWNLD: { if((SignalCode == API_L1_DYN_DWNLD_FINISHED) && (l1a.dyn_dwnld.semaphore_vect[E2_STATE_MACHINE] == GREEN)) { #if 0 //((TRACE_TYPE==1) || (TRACE_TYPE == 4)) // Disable trace DSP upon E2 MELODY activation l1_disable_dsp_trace(); #endif // Reset the emergency flag l1a_l1s_com.melody1_e2_task.parameters.emergency_stop = FALSE; // Initialize the buffer parameters l1a_l1s_com.melody1_e2_task.parameters.ptr_buf = NULL; l1a_l1s_com.melody1_e2_task.parameters.buffer_size = 0; l1a_l1s_com.melody1_e2_task.parameters.error_id = Cust_get_pointer((UWORD16 **)&l1a_l1s_com.melody1_e2_task.parameters.ptr_buf, &l1a_l1s_com.melody1_e2_task.parameters.buffer_size, l1a_l1s_com.melody1_e2_task.parameters.session_id); // Convert the buffer size in bytes unit because the E2 melody is defined in byte unit l1a_l1s_com.melody1_e2_task.parameters.buffer_size <<= 1; // Jump the NumberOfOscillator parameter l1a_l1s_com.melody1_e2_task.parameters.error_id = copy_byte_data_from_buffer (l1a_l1s_com.melody1_e2_task.parameters.session_id, &l1a_l1s_com.melody1_e2_task.parameters.buffer_size, (UWORD8 **)&l1a_l1s_com.melody1_e2_task.parameters.ptr_buf, 1, (UWORD8 *)(&(i))); // Read the Header of the melody description in order to download the time factor // clean the MSB of the global time factor register l1s_dsp_com.dsp_ndb_ptr->d_melody_e2_globaltimefactor &= 0x00FF; l1a_l1s_com.melody1_e2_task.parameters.error_id = copy_byte_data_from_buffer (l1a_l1s_com.melody1_e2_task.parameters.session_id, &l1a_l1s_com.melody1_e2_task.parameters.buffer_size, (UWORD8 **)&l1a_l1s_com.melody1_e2_task.parameters.ptr_buf, 1, (UWORD8 *)(&(i))); l1s_dsp_com.dsp_ndb_ptr->d_melody_e2_globaltimefactor = i; // Find the number of insturment of the melody (jump the header memory) l1a_l1s_com.melody1_e2_task.parameters.error_id = copy_byte_data_from_buffer (l1a_l1s_com.melody1_e2_task.parameters.session_id, &l1a_l1s_com.melody1_e2_task.parameters.buffer_size, (UWORD8 **)&l1a_l1s_com.melody1_e2_task.parameters.ptr_buf, 1, &(l1a_l1s_com.melody1_e2_task.parameters.number_of_instrument)); for (i=0; i<(l1a_l1s_com.melody1_e2_task.parameters.number_of_instrument); i++) { // find the beginning of the melody description (after the header field) // and put it in the buf_ptr buffer l1a_l1s_com.melody1_e2_task.parameters.error_id = copy_byte_data_from_buffer (l1a_l1s_com.melody1_e2_task.parameters.session_id, &l1a_l1s_com.melody1_e2_task.parameters.buffer_size, (UWORD8 **)&l1a_l1s_com.melody1_e2_task.parameters.ptr_buf, 1, &(l1a_l1s_com.melody1_e2_task.parameters.waves_table_id[i])); } // Initialize the size (in byte unit) of the header l1a_l1s_com.melody1_e2_task.parameters.header_size = 3 + l1a_l1s_com.melody1_e2_task.parameters.number_of_instrument; // download the instrument l1_send_melody_e2_background_msg(L1_BACK_MELODY_E2_LOAD_INSTRUMENT_REQ, 1); // Send the start confirmation message l1a_audio_send_confirmation(MMI_MELODY1_E2_START_CON); *state = M1_WAIT_LOAD_INSTRUMENT; #if ((TRACE_TYPE == 1) || (TRACE_TYPE == 4) || (TRACE_TYPE == 5)) if((trace_info.current_config->l1_dyn_trace) & (1<<L1_DYN_TRACE_DYN_DWNLD)) { char str[30]; sprintf(str,"E21 SM un-blocked\r\n"); #if(CODE_VERSION == SIMULATION) trace_fct_simu_dyn_dwnld(str); #else rvt_send_trace_cpy((T_RVT_BUFFER)str,trace_info.l1_trace_user_id,strlen(str),RVT_ASCII_FORMAT); #endif } #endif // (TRACE_TYPE == 1) || (TRACE_TYPE == 4) } return; } break; case M1_WAIT_LOAD_INSTRUMENT: { if (SignalCode == L1_BACK_MELODY_E2_LOAD_INSTRUMENT_CON) { if ( ((T_L1_BACK_MELODY_E2_LOAD_INSTRUMENT_REQ *)(msg->SigP))->melody_id == 1 ) { // The load instrument confirmation message is for the melody 1 if (l1a_l1s_com.melody1_e2_task.parameters.emergency_stop) { // Unload the instrument l1_send_melody_e2_background_msg(L1_BACK_MELODY_E2_UNLOAD_INSTRUMENT_REQ, 1); *state = M1_WAIT_UNLOAD_INSTRUMENT; } else { // Start to play the melody1 l1a_l1s_com.melody1_e2_task.command.start = TRUE; *state = M1_WAIT_STOP; } } } else if (SignalCode == MMI_MELODY1_E2_STOP_REQ) { // Set the emergency flag l1a_l1s_com.melody1_e2_task.parameters.emergency_stop = TRUE; } // End process return; } break; case M1_WAIT_STOP: { if (SignalCode == L1_MELODY1_E2_STOP_CON) { // Unload the instrument l1_send_melody_e2_background_msg(L1_BACK_MELODY_E2_UNLOAD_INSTRUMENT_REQ, 1); *state = M1_WAIT_UNLOAD_INSTRUMENT; } else if (SignalCode == MMI_MELODY1_E2_STOP_REQ) { // Stop the melody 0 L1S task: l1a_l1s_com.melody1_e2_task.command.stop = TRUE; } // End process return; } break; case M1_WAIT_UNLOAD_INSTRUMENT: { if (SignalCode == L1_BACK_MELODY_E2_UNLOAD_INSTRUMENT_CON) { if ( ((T_L1_BACK_MELODY_E2_UNLOAD_INSTRUMENT_REQ *)(msg->SigP))->melody_id == 1 ) { // Send the stop confirmation message l1a_audio_send_confirmation(MMI_MELODY1_E2_STOP_CON); *state = M1_RESET; #if 0 //((TRACE_TYPE==1) || (TRACE_TYPE == 4)) // Enable trace DSP upon E2 MELODY deactivation l1_enable_dsp_trace(); #endif } } // End process return; } break; } // switch } // while(1) } #else // L1_DYN_DSP_DWNLD = 0 /*-------------------------------------------------------*/ /* l1a_mmi_melody0_e2_process() */ /*-------------------------------------------------------*/ /* */ /* Description: */ /* ------------ */ /* This function is a state machine which handles the */ /* melody 0 format E2 feature. */ /* */ /* Starting messages: MMI_MELODY0_E2_START_REQ */ /* */ /* Result messages (input): L1_MELODY0_E2_START_CON */ /* */ /* Result messages (output): MMI_MELODY0_E2_START_CON */ /* */ /* Reset messages (input): none */ /* */ /* Stop message (input): MMI_MELDOY0_E2_STOP_REQ */ /* L1_MELODY0_E2_STOP_CON */ /* */ /* Stop message (output): MMI_MELODY0_E2_STOP_CON */ /* */ /* Rem: */ /* ---- */ /* */ /*-------------------------------------------------------*/ void l1a_mmi_melody0_e2_process(xSignalHeaderRec *msg) { enum states { M0_RESET = 0, M0_WAIT_START_REQ = 1, M0_WAIT_LOAD_INSTRUMENT = 2, M0_WAIT_STOP = 3, M0_WAIT_UNLOAD_INSTRUMENT = 4 }; UWORD8 *state = &l1a.state[L1A_MELODY0_E2_STATE], i; UWORD32 SignalCode = msg->SignalCode; while(1) { switch(*state) { case M0_RESET: { // Reset the commands: l1a_l1s_com.melody0_e2_task.command.start = FALSE; l1a_l1s_com.melody0_e2_task.command.stop = FALSE; *state = M0_WAIT_START_REQ; } break; case M0_WAIT_START_REQ: { if (SignalCode == MMI_MELODY0_E2_START_REQ) { #if 0 //((TRACE_TYPE==1) || (TRACE_TYPE == 4)) // Disable trace DSP upon E2 MELODY activation l1_disable_dsp_trace(); #endif // Download the parameters from the message: l1a_l1s_com.melody0_e2_task.parameters.session_id = ((T_MMI_MELODY_E2_REQ *)(msg->SigP))->session_id; l1a_l1s_com.melody0_e2_task.parameters.loopback = ((T_MMI_MELODY_E2_REQ *)(msg->SigP))->loopback; // Reset the emergency flag l1a_l1s_com.melody0_e2_task.parameters.emergency_stop = FALSE; // Initialize the buffer parameters l1a_l1s_com.melody0_e2_task.parameters.ptr_buf = NULL; l1a_l1s_com.melody0_e2_task.parameters.buffer_size = 0; l1a_l1s_com.melody0_e2_task.parameters.error_id = Cust_get_pointer((UWORD16 **)&l1a_l1s_com.melody0_e2_task.parameters.ptr_buf, &l1a_l1s_com.melody0_e2_task.parameters.buffer_size, l1a_l1s_com.melody0_e2_task.parameters.session_id); // Convert the buffer size in bytes unit because the E2 melody is defined in byte unit l1a_l1s_com.melody0_e2_task.parameters.buffer_size <<= 1; // Jump the NumberOfOscillator parameter l1a_l1s_com.melody0_e2_task.parameters.error_id = copy_byte_data_from_buffer (l1a_l1s_com.melody0_e2_task.parameters.session_id, &l1a_l1s_com.melody0_e2_task.parameters.buffer_size, (UWORD8 **)&l1a_l1s_com.melody0_e2_task.parameters.ptr_buf, 1, (UWORD8 *)(&(i))); // Read the Header of the melody description in order to download the time factor // clean the MSB of the global time factor register l1s_dsp_com.dsp_ndb_ptr->d_melody_e2_globaltimefactor &= 0x00FF; l1a_l1s_com.melody0_e2_task.parameters.error_id = copy_byte_data_from_buffer (l1a_l1s_com.melody0_e2_task.parameters.session_id, &l1a_l1s_com.melody0_e2_task.parameters.buffer_size, (UWORD8 **)&l1a_l1s_com.melody0_e2_task.parameters.ptr_buf, 1, (UWORD8 *)(&(i))); l1s_dsp_com.dsp_ndb_ptr->d_melody_e2_globaltimefactor = i; // Find the number of insturment of the melody (jump the header memory) l1a_l1s_com.melody0_e2_task.parameters.error_id = copy_byte_data_from_buffer (l1a_l1s_com.melody0_e2_task.parameters.session_id, &l1a_l1s_com.melody0_e2_task.parameters.buffer_size, (UWORD8 **)&l1a_l1s_com.melody0_e2_task.parameters.ptr_buf, 1, &(l1a_l1s_com.melody0_e2_task.parameters.number_of_instrument)); for (i=0; i<(l1a_l1s_com.melody0_e2_task.parameters.number_of_instrument); i++) { // find the beginning of the melody description (after the header field) // and put it in the buf_ptr buffer l1a_l1s_com.melody0_e2_task.parameters.error_id = copy_byte_data_from_buffer (l1a_l1s_com.melody0_e2_task.parameters.session_id, &l1a_l1s_com.melody0_e2_task.parameters.buffer_size, (UWORD8 **)&l1a_l1s_com.melody0_e2_task.parameters.ptr_buf, 1, &(l1a_l1s_com.melody0_e2_task.parameters.waves_table_id[i])); } // Initialize the size (in byte unit) of the header l1a_l1s_com.melody0_e2_task.parameters.header_size = 3 + l1a_l1s_com.melody0_e2_task.parameters.number_of_instrument; // download the instrument l1_send_melody_e2_background_msg(L1_BACK_MELODY_E2_LOAD_INSTRUMENT_REQ, 0); // Send the start confirmation message l1a_audio_send_confirmation(MMI_MELODY0_E2_START_CON); *state = M0_WAIT_LOAD_INSTRUMENT; } // End process return; } break; case M0_WAIT_LOAD_INSTRUMENT: { if (SignalCode == L1_BACK_MELODY_E2_LOAD_INSTRUMENT_CON) { if ( ((T_L1_BACK_MELODY_E2_LOAD_INSTRUMENT_REQ *)(msg->SigP))->melody_id == 0 ) { // The load instrument confirmation message is for the melody 0 if (l1a_l1s_com.melody0_e2_task.parameters.emergency_stop) { // Unload the instrument l1_send_melody_e2_background_msg(L1_BACK_MELODY_E2_UNLOAD_INSTRUMENT_REQ, 0); *state = M0_WAIT_UNLOAD_INSTRUMENT; } else { // Start to play the melody0 l1a_l1s_com.melody0_e2_task.command.start = TRUE; *state = M0_WAIT_STOP; } } } else if (SignalCode == MMI_MELODY0_E2_STOP_REQ) { // Set the emergency flag l1a_l1s_com.melody0_e2_task.parameters.emergency_stop = TRUE; } // End process return; } break; case M0_WAIT_STOP: { if (SignalCode == L1_MELODY0_E2_STOP_CON) { // Unload the instrument l1_send_melody_e2_background_msg(L1_BACK_MELODY_E2_UNLOAD_INSTRUMENT_REQ, 0); *state = M0_WAIT_UNLOAD_INSTRUMENT; } else if (SignalCode == MMI_MELODY0_E2_STOP_REQ) { // Stop the melody 0 L1S task: l1a_l1s_com.melody0_e2_task.command.stop = TRUE; } // End process return; } break; case M0_WAIT_UNLOAD_INSTRUMENT: { if (SignalCode == L1_BACK_MELODY_E2_UNLOAD_INSTRUMENT_CON) { if ( ((T_L1_BACK_MELODY_E2_UNLOAD_INSTRUMENT_REQ *)(msg->SigP))->melody_id == 0 ) { // Send the stop confirmation message l1a_audio_send_confirmation(MMI_MELODY0_E2_STOP_CON); *state = M0_RESET; #if 0 //((TRACE_TYPE==1) || (TRACE_TYPE == 4)) // Enable trace DSP upon E2 MELODY deactivation l1_enable_dsp_trace(); #endif } } // End process return; } break; } // switch } // while(1) } /*-------------------------------------------------------*/ /* l1a_mmi_melody1_e2_process() */ /*-------------------------------------------------------*/ /* */ /* Description: */ /* ------------ */ /* This function is a state machine which handles the */ /* melody 1 format E2 feature. */ /* */ /* Starting messages: MMI_MELODY1_E2_START_REQ */ /* */ /* Result messages (input): L1_MELODY1_E2_START_CON */ /* */ /* Result messages (output): MMI_MELODY1_E2_START_CON */ /* */ /* Reset messages (input): none */ /* */ /* Stop message (input): MMI_MELDOY0_E2_STOP_REQ */ /* L1_MELODY1_E2_STOP_CON */ /* */ /* Stop message (output): MMI_MELODY1_E2_STOP_CON */ /* */ /* Rem: */ /* ---- */ /* */ /*-------------------------------------------------------*/ void l1a_mmi_melody1_e2_process(xSignalHeaderRec *msg) { enum states { M1_RESET = 0, M1_WAIT_START_REQ = 1, M1_WAIT_LOAD_INSTRUMENT = 2, M1_WAIT_STOP = 3, M1_WAIT_UNLOAD_INSTRUMENT = 4 }; UWORD8 *state = &l1a.state[L1A_MELODY1_E2_STATE], i; UWORD32 SignalCode = msg->SignalCode; while(1) { switch(*state) { case M1_RESET: { // Reset the commands: l1a_l1s_com.melody1_e2_task.command.start = FALSE; l1a_l1s_com.melody1_e2_task.command.stop = FALSE; *state = M1_WAIT_START_REQ; } break; case M1_WAIT_START_REQ: { if (SignalCode == MMI_MELODY1_E2_START_REQ) { #if 0 //((TRACE_TYPE==1) || (TRACE_TYPE == 4)) // Disable trace DSP upon E2 MELODY activation l1_disable_dsp_trace(); #endif // Download the parameters from the message: l1a_l1s_com.melody1_e2_task.parameters.session_id = ((T_MMI_MELODY_E2_REQ *)(msg->SigP))->session_id; l1a_l1s_com.melody1_e2_task.parameters.loopback = ((T_MMI_MELODY_E2_REQ *)(msg->SigP))->loopback; // Reset the emergency flag l1a_l1s_com.melody1_e2_task.parameters.emergency_stop = FALSE; // Initialize the buffer parameters l1a_l1s_com.melody1_e2_task.parameters.ptr_buf = NULL; l1a_l1s_com.melody1_e2_task.parameters.buffer_size = 0; l1a_l1s_com.melody1_e2_task.parameters.error_id = Cust_get_pointer((UWORD16 **)&l1a_l1s_com.melody1_e2_task.parameters.ptr_buf, &l1a_l1s_com.melody1_e2_task.parameters.buffer_size, l1a_l1s_com.melody1_e2_task.parameters.session_id); // Convert the buffer size in bytes unit because the E2 melody is defined in byte unit l1a_l1s_com.melody1_e2_task.parameters.buffer_size <<= 1; // Jump the NumberOfOscillator parameter l1a_l1s_com.melody1_e2_task.parameters.error_id = copy_byte_data_from_buffer (l1a_l1s_com.melody1_e2_task.parameters.session_id, &l1a_l1s_com.melody1_e2_task.parameters.buffer_size, (UWORD8 **)&l1a_l1s_com.melody1_e2_task.parameters.ptr_buf, 1, (UWORD8 *)(&(i))); // Read the Header of the melody description in order to download the time factor // clean the MSB of the global time factor register l1s_dsp_com.dsp_ndb_ptr->d_melody_e2_globaltimefactor &= 0x00FF; l1a_l1s_com.melody1_e2_task.parameters.error_id = copy_byte_data_from_buffer (l1a_l1s_com.melody1_e2_task.parameters.session_id, &l1a_l1s_com.melody1_e2_task.parameters.buffer_size, (UWORD8 **)&l1a_l1s_com.melody1_e2_task.parameters.ptr_buf, 1, (UWORD8 *)(&(i))); l1s_dsp_com.dsp_ndb_ptr->d_melody_e2_globaltimefactor = i; // Find the number of insturment of the melody (jump the header memory) l1a_l1s_com.melody1_e2_task.parameters.error_id = copy_byte_data_from_buffer (l1a_l1s_com.melody1_e2_task.parameters.session_id, &l1a_l1s_com.melody1_e2_task.parameters.buffer_size, (UWORD8 **)&l1a_l1s_com.melody1_e2_task.parameters.ptr_buf, 1, &(l1a_l1s_com.melody1_e2_task.parameters.number_of_instrument)); for (i=0; i<(l1a_l1s_com.melody1_e2_task.parameters.number_of_instrument); i++) { // find the beginning of the melody description (after the header field) // and put it in the buf_ptr buffer l1a_l1s_com.melody1_e2_task.parameters.error_id = copy_byte_data_from_buffer (l1a_l1s_com.melody1_e2_task.parameters.session_id, &l1a_l1s_com.melody1_e2_task.parameters.buffer_size, (UWORD8 **)&l1a_l1s_com.melody1_e2_task.parameters.ptr_buf, 1, &(l1a_l1s_com.melody1_e2_task.parameters.waves_table_id[i])); } // Initialize the size (in byte unit) of the header l1a_l1s_com.melody1_e2_task.parameters.header_size = 3 + l1a_l1s_com.melody1_e2_task.parameters.number_of_instrument; // download the instrument l1_send_melody_e2_background_msg(L1_BACK_MELODY_E2_LOAD_INSTRUMENT_REQ, 1); // Send the start confirmation message l1a_audio_send_confirmation(MMI_MELODY1_E2_START_CON); *state = M1_WAIT_LOAD_INSTRUMENT; } // End process return; } break; case M1_WAIT_LOAD_INSTRUMENT: { if (SignalCode == L1_BACK_MELODY_E2_LOAD_INSTRUMENT_CON) { if ( ((T_L1_BACK_MELODY_E2_LOAD_INSTRUMENT_REQ *)(msg->SigP))->melody_id == 1 ) { // The load instrument confirmation message is for the melody 1 if (l1a_l1s_com.melody1_e2_task.parameters.emergency_stop) { // Unload the instrument l1_send_melody_e2_background_msg(L1_BACK_MELODY_E2_UNLOAD_INSTRUMENT_REQ, 1); *state = M1_WAIT_UNLOAD_INSTRUMENT; } else { // Start to play the melody1 l1a_l1s_com.melody1_e2_task.command.start = TRUE; *state = M1_WAIT_STOP; } } } else if (SignalCode == MMI_MELODY1_E2_STOP_REQ) { // Set the emergency flag l1a_l1s_com.melody1_e2_task.parameters.emergency_stop = TRUE; } // End process return; } break; case M1_WAIT_STOP: { if (SignalCode == L1_MELODY1_E2_STOP_CON) { // Unload the instrument l1_send_melody_e2_background_msg(L1_BACK_MELODY_E2_UNLOAD_INSTRUMENT_REQ, 1); *state = M1_WAIT_UNLOAD_INSTRUMENT; } else if (SignalCode == MMI_MELODY1_E2_STOP_REQ) { // Stop the melody 0 L1S task: l1a_l1s_com.melody1_e2_task.command.stop = TRUE; } // End process return; } break; case M1_WAIT_UNLOAD_INSTRUMENT: { if (SignalCode == L1_BACK_MELODY_E2_UNLOAD_INSTRUMENT_CON) { if ( ((T_L1_BACK_MELODY_E2_UNLOAD_INSTRUMENT_REQ *)(msg->SigP))->melody_id == 1 ) { // Send the stop confirmation message l1a_audio_send_confirmation(MMI_MELODY1_E2_STOP_CON); *state = M1_RESET; #if 0 //((TRACE_TYPE==1) || (TRACE_TYPE == 4)) // Enable trace DSP upon E2 MELODY deactivation l1_enable_dsp_trace(); #endif } } // End process return; } break; } // switch } // while(1) } #endif // L1_DYN_DSP_DWNLD #endif // MELODY_E2 #if (L1_CPORT == 1) /*-------------------------------------------------------*/ /* l1a_mmi_cport_process() */ /*-------------------------------------------------------*/ /* */ /* Description: */ /* ------------ */ /* This function is a state machine which handles the */ /* cport configuration feature. */ /* */ /* Starting messages: MMI_CPORT_CONFIGURE_REQ */ /* */ /* Result messages (input): L1_CPORT_CONFIGURE_CON */ /* */ /* Result messages (output): MMI_CPORT_CONFIGURE_CON */ /* */ /* Reset messages (input): none */ /* */ /* Stop message (input): none */ /* */ /* Stop message (output): none */ /* */ /* Rem: */ /* ---- */ /* */ /*-------------------------------------------------------*/ void l1a_mmi_cport_process(xSignalHeaderRec *msg) { enum states { RESET = 0, WAIT_START_REQ = 1, WAIT_START_CON = 2 }; UWORD8 *state = &l1a.state[L1A_CPORT_STATE]; UWORD32 SignalCode = msg->SignalCode; while(1) { switch(*state) { case RESET: { // Reset the command l1a_l1s_com.cport_task.command.start = FALSE; *state = WAIT_START_REQ; } break; case WAIT_START_REQ: { if (SignalCode == MMI_CPORT_CONFIGURE_REQ) { // Download the parameters from the message: l1a_l1s_com.cport_task.parameters.configuration = ((T_MMI_CPORT_CONFIGURE_REQ *)(msg->SigP))->configuration; l1a_l1s_com.cport_task.parameters.cpcfr1 = ((T_MMI_CPORT_CONFIGURE_REQ *)(msg->SigP))->cpcfr1; l1a_l1s_com.cport_task.parameters.cpcfr2 = ((T_MMI_CPORT_CONFIGURE_REQ *)(msg->SigP))->cpcfr2; l1a_l1s_com.cport_task.parameters.cpcfr3 = ((T_MMI_CPORT_CONFIGURE_REQ *)(msg->SigP))->cpcfr3; l1a_l1s_com.cport_task.parameters.cpcfr4 = ((T_MMI_CPORT_CONFIGURE_REQ *)(msg->SigP))->cpcfr4; l1a_l1s_com.cport_task.parameters.cptctl = ((T_MMI_CPORT_CONFIGURE_REQ *)(msg->SigP))->cptctl; l1a_l1s_com.cport_task.parameters.cptdat = ((T_MMI_CPORT_CONFIGURE_REQ *)(msg->SigP))->cptdat; l1a_l1s_com.cport_task.parameters.cpttaddr = ((T_MMI_CPORT_CONFIGURE_REQ *)(msg->SigP))->cpttaddr; l1a_l1s_com.cport_task.parameters.cptvs = ((T_MMI_CPORT_CONFIGURE_REQ *)(msg->SigP))->cptvs; l1a_l1s_com.cport_task.parameters.ctrl = ((T_MMI_CPORT_CONFIGURE_REQ *)(msg->SigP))->ctrl; // Start the L1S cport task l1a_l1s_com.cport_task.command.start = TRUE; *state = WAIT_START_CON; } // End process return; } break; case WAIT_START_CON: { if (SignalCode == L1_CPORT_CONFIGURE_CON) { // Forward the stop confirmation message l1a_audio_send_result(MMI_CPORT_CONFIGURE_CON, msg, MMI_QUEUE); *state = RESET; } // End process return; } break; } // switch } // while(1) } #endif // L1_CPORT == 1 #if (L1_EXTERNAL_AUDIO_VOICE_ONOFF == 1) /*-------------------------------------------------------*/ /* l1a_mmi_audio_onoff_process() */ /*-------------------------------------------------------*/ /* */ /* Description: */ /* ------------ */ /* This function is a state machine which handles the */ /* audio on/off feature. */ /* */ /* Starting messages: MMI_AUDIO_ONOFF_REQ */ /* */ /* Result messages (input): L1_AUDIO_ONOFF_CON */ /* */ /* Result messages (output): MMI_AUDIO_ONOFF_CON */ /* */ /* Reset messages (input): none */ /* */ /* Stop message (input): none */ /* */ /* Stop message (output): none */ /* */ /* Rem: */ /* ---- */ /* */ /*-------------------------------------------------------*/ void l1a_mmi_audio_onoff_process(xSignalHeaderRec *msg) { enum states { RESET = 0, WAIT_START_REQ = 1, WAIT_START_CON = 2 }; UWORD8 *state = &l1a.state[L1A_AUDIO_ONOFF_STATE]; UWORD32 SignalCode = msg->SignalCode; while(1) { switch(*state) { case RESET: { // Reset the command l1a_l1s_com.audio_onoff_task.command.start = FALSE; *state = WAIT_START_REQ; } break; case WAIT_START_REQ: { if (SignalCode == MMI_AUDIO_ONOFF_REQ) { // Download the parameters from the message: l1a_l1s_com.audio_onoff_task.parameters.onoff_value = ((T_MMI_AUDIO_ONOFF_REQ *)(msg->SigP))->onoff_value; // Start the L1S keybeep task l1a_l1s_com.audio_onoff_task.command.start = TRUE; *state = WAIT_START_CON; } // End process return; } break; case WAIT_START_CON: { if (SignalCode == L1_AUDIO_ONOFF_CON) { // Send the start confirmation message l1a_audio_send_confirmation(MMI_AUDIO_ONOFF_CON); *state = RESET; } // End process return; } break; } // switch } // while(1) } #endif #if (L1_EXT_MCU_AUDIO_VOICE_ONOFF == 1) /*-------------------------------------------------------*/ /* l1a_mmi_audio_onoff_process() */ /*-------------------------------------------------------*/ /* */ /* Description: */ /* ------------ */ /* This function is a state machine which handles the */ /* audio on/off feature. */ /* */ /* Starting messages: MMI_AUDIO_ONOFF_REQ */ /* */ /* Result messages (input): L1_AUDIO_ONOFF_CON */ /* */ /* Result messages (output): MMI_AUDIO_ONOFF_CON */ /* */ /* Reset messages (input): none */ /* */ /* Stop message (input): none */ /* */ /* Stop message (output): none */ /* */ /* Rem: */ /* ---- */ /* */ /*-------------------------------------------------------*/ void l1a_mmi_audio_onoff_process(xSignalHeaderRec *msg) { enum states { RESET = 0, WAIT_START_REQ = 1, WAIT_START_CON = 2 }; UWORD8 *state = &l1a.state[L1A_AUDIO_ONOFF_STATE]; UWORD32 SignalCode = msg->SignalCode; while(1) { switch(*state) { case RESET: { // Reset the command l1a_l1s_com.audio_onoff_task.command.start = FALSE; *state = WAIT_START_REQ; } break; case WAIT_START_REQ: { if (SignalCode == MMI_AUDIO_ONOFF_REQ) { // Download the parameters from the message: l1a_l1s_com.audio_onoff_task.parameters.vul_onoff_value = ((T_MMI_AUDIO_ONOFF_REQ *)(msg->SigP))->vul_onoff_value; l1a_l1s_com.audio_onoff_task.parameters.vdl_onoff_value = ((T_MMI_AUDIO_ONOFF_REQ *)(msg->SigP))->vdl_onoff_value; // Start the L1S keybeep task l1a_l1s_com.audio_onoff_task.command.start = TRUE; *state = WAIT_START_CON; } // End process return; } // omaps00090550 break; case WAIT_START_CON: { if (SignalCode == L1_AUDIO_ONOFF_CON) { // Send the start confirmation message l1a_audio_send_confirmation(MMI_AUDIO_ONOFF_CON); *state = RESET; } // End process return; } // omaps00090550 break; } // switch } // while(1) } #endif #if (L1_EXT_AUDIO_MGT == 1) /*-------------------------------------------------------*/ /* l1a_mmi_ext_audio_mgt_process() */ /*-------------------------------------------------------*/ /* */ /* Description: */ /* ------------ */ /* This function is a state machine which handles the */ /* external audio management feature. */ /* */ /* Starting messages: MMI_EXT_AUDIO_MGT_START_REQ */ /* */ /* Result messages (input): L1_STEREOPATH_DRV_START_CON */ /* */ /* Result messages (output): MMI_EXT_AUDIO_MGT_START_CON */ /* */ /* Reset messages (input): none */ /* */ /* Stop message (input): MMI_EXT_AUDIO_MGT_STOP_REQ */ /* L1_STEREOPATH_DRV_STOP_CON */ /* */ /* Stop message (output): MMI_EXT_AUDIO_MGT_STOP_CON */ /* */ /* Rem: */ /* ---- */ /* */ /*-------------------------------------------------------*/ void l1a_mmi_ext_audio_mgt_process(xSignalHeaderRec *msg) { enum states { RESET = 0, WAIT_START_REQ = 1, WAIT_START_CON = 2, WAIT_STOP = 3 }; UWORD8 *state = &l1a.state[L1A_EXT_AUDIO_MGT_STATE]; UWORD32 SignalCode = msg->SignalCode; UWORD8 sample_rate; while(1) { switch(*state) { case RESET: { #if(L1_BT_AUDIO ==1) midi_task_running=FALSE; #endif *state = WAIT_START_REQ; } break; case WAIT_START_REQ: { if (SignalCode == MMI_EXT_AUDIO_MGT_START_REQ) { // save global variable l1s.ext_audio_mgt.session_id = ((T_MMI_EXT_AUDIO_MGT_START_REQ *)(msg->SigP))->session_id; #if(L1_BT_AUDIO ==1) l1_audio_bt_init(AUDIO_EXT_MIDI_BUFFER_SIZE); if(bt_audio.connected_status==TRUE) { bt_audio.pcmconfig.bitsPerSample=16; bt_audio.pcmconfig.numChannels =((T_MMI_EXT_AUDIO_MGT_START_REQ *)(msg->SigP))->mono_stereo+1; sample_rate =((T_MMI_EXT_AUDIO_MGT_START_REQ *)(msg->SigP))->sampling_frequency; bt_audio.pcmconfig.sampleRate =l1_ext_audio_get_frequencyrate(sample_rate); bt_audio.audio_configure_callback(&bt_audio.pcmconfig); } #endif if(bt_audio.connected_status==FALSE) { // Download the stereopath description. l1a_l1s_com.stereopath_drv_task.parameters.sampling_frequency = ((T_MMI_EXT_AUDIO_MGT_START_REQ *)(msg->SigP))->sampling_frequency; l1a_l1s_com.stereopath_drv_task.parameters.DMA_allocation = AUDIO_SP_DMA_ALLOC_MCU; l1a_l1s_com.stereopath_drv_task.parameters.DMA_int_callback_fct = l1_ext_audio_mgt_dma_handler; l1a_l1s_com.stereopath_drv_task.parameters.DMA_channel_number = ((T_MMI_EXT_AUDIO_MGT_START_REQ *)(msg->SigP))->DMA_channel_number; l1a_l1s_com.stereopath_drv_task.parameters.data_type = ((T_MMI_EXT_AUDIO_MGT_START_REQ *)(msg->SigP))->data_type; l1a_l1s_com.stereopath_drv_task.parameters.source_port = AUDIO_SP_SOURCE_IMIF; l1a_l1s_com.stereopath_drv_task.parameters.source_buffer_address = ((T_MMI_EXT_AUDIO_MGT_START_REQ *)(msg->SigP))->source_buffer_address; l1a_l1s_com.stereopath_drv_task.parameters.element_number = ((T_MMI_EXT_AUDIO_MGT_START_REQ *)(msg->SigP))->element_number; l1a_l1s_com.stereopath_drv_task.parameters.frame_number = ((T_MMI_EXT_AUDIO_MGT_START_REQ *)(msg->SigP))->frame_number; l1a_l1s_com.stereopath_drv_task.parameters.mono_stereo = ((T_MMI_EXT_AUDIO_MGT_START_REQ *)(msg->SigP))->mono_stereo; l1a_l1s_com.stereopath_drv_task.parameters.feature_identifier = AUDIO_SP_EXT_AUDIO_ID; // Start the L1S stereopath task l1a_l1s_com.stereopath_drv_task.command.start = TRUE; #if(L1_BT_AUDIO ==1) midi_task_running=TRUE; #endif *state = WAIT_START_CON; } else { l1a_audio_send_confirmation(MMI_EXT_AUDIO_MGT_START_CON); *state = WAIT_STOP; } // End process return; } } // omaps00090550 break; case WAIT_START_CON: { if (SignalCode == L1_STEREOPATH_DRV_START_CON) { // Send the start confirmation message l1a_audio_send_confirmation(MMI_EXT_AUDIO_MGT_START_CON); *state = WAIT_STOP; } // End process return; } // omaps00090550 break; case WAIT_STOP: { if (SignalCode == MMI_EXT_AUDIO_MGT_STOP_REQ) { if(bt_audio.connected_status==TRUE) { // Send the stop confirmation message l1a_audio_send_confirmation(MMI_EXT_AUDIO_MGT_STOP_CON); midi_task_running=FALSE; *state = RESET; } else { // Stop the L1S stereopath task l1a_l1s_com.stereopath_drv_task.command.stop = TRUE; // End process return; } } if (SignalCode == L1_STEREOPATH_DRV_STOP_CON) { // Send the stop confirmation message l1a_audio_send_confirmation(MMI_EXT_AUDIO_MGT_STOP_CON); #if(L1_BT_AUDIO ==1) midi_task_running=FALSE; #endif *state = RESET; } else { // End process return; } } break; } // switch } // while(1) } #endif // EXT_AUDIO_MGT == 1 #if (L1_ANR == 1) /*-------------------------------------------------------*/ /* l1a_mmi_anr_process() */ /*-------------------------------------------------------*/ /* */ /* Description: */ /* ------------ */ /* This function is a state machine which handles the */ /* ANR feature. */ /* */ /* Starting messages: MMI_ANR_REQ */ /* */ /* Result messages (input): L1_ANR_CON */ /* */ /* Result messages (output): MMI_ANR_CON */ /* */ /* Reset messages (input): none */ /* */ /* Stop message (input): none */ /* */ /* Stop message (output): none */ /* */ /*-------------------------------------------------------*/ #if(L1_DYN_DSP_DWNLD == 1) void l1a_mmi_anr_process(xSignalHeaderRec *msg) { enum states { RESET = 0, WAIT_REQ = 1, WAIT_DYN_DWNLD = 2, WAIT_CON = 3 }; UWORD8 *state = &l1a.state[L1A_ANR_STATE]; UWORD32 SignalCode = msg->SignalCode; while(1) { switch(*state) { case RESET: { // Reset the command l1a_l1s_com.anr_task.command.update = FALSE; *state = WAIT_REQ; } break; case WAIT_REQ: { if (SignalCode == MMI_ANR_REQ) { // Load the message into the l1a_l1s_com memory. l1a_l1s_com.anr_task.parameters.anr_enable = ((T_MMI_ANR_REQ *)(msg->SigP))->anr_enable; l1a_l1s_com.anr_task.parameters.min_gain = ((T_MMI_ANR_REQ *)(msg->SigP))->min_gain; l1a_l1s_com.anr_task.parameters.div_factor_shift = ((T_MMI_ANR_REQ *)(msg->SigP))->div_factor_shift; l1a_l1s_com.anr_task.parameters.ns_level = ((T_MMI_ANR_REQ *)(msg->SigP))->ns_level; if (l1a.dyn_dwnld.semaphore_vect[ANR_STATE_MACHINE] == GREEN) { // WARNING: the following code must be copied in the state WAIT_DYN_DWNLD // when activating the task at L1s level // Enable the L1S task l1a_l1s_com.anr_task.command.update = TRUE; *state = WAIT_CON; } else { *state = WAIT_DYN_DWNLD; #if ((TRACE_TYPE == 1) || (TRACE_TYPE == 4) || (TRACE_TYPE == 5)) if((trace_info.current_config->l1_dyn_trace) & (1<<L1_DYN_TRACE_DYN_DWNLD)) { char str[30]; sprintf(str,"ANR SM blocked by DYN DWNLD\r\n"); #if(CODE_VERSION == SIMULATION) trace_fct_simu_dyn_dwnld(str); #else rvt_send_trace_cpy((T_RVT_BUFFER)str,trace_info.l1_trace_user_id,strlen(str),RVT_ASCII_FORMAT); #endif } #endif // (TRACE_TYPE == 1) || (TRACE_TYPE == 4) } } // End process return; } break; case WAIT_DYN_DWNLD: { if(SignalCode == API_L1_DYN_DWNLD_FINISHED && l1a.dyn_dwnld.semaphore_vect[ANR_STATE_MACHINE] == GREEN) { // Enable the L1S task l1a_l1s_com.anr_task.command.update = TRUE; *state = WAIT_CON; #if ((TRACE_TYPE == 1) || (TRACE_TYPE == 4) || (TRACE_TYPE == 5)) if((trace_info.current_config->l1_dyn_trace) & (1<<L1_DYN_TRACE_DYN_DWNLD)) { char str[30]; sprintf(str,"ANR SM un-blocked\r\n"); #if(CODE_VERSION == SIMULATION) trace_fct_simu_dyn_dwnld(str); #else rvt_send_trace_cpy((T_RVT_BUFFER)str,trace_info.l1_trace_user_id,strlen(str),RVT_ASCII_FORMAT); #endif } #endif // (TRACE_TYPE == 1) || (TRACE_TYPE == 4) } return; } break; case WAIT_CON: { if (SignalCode == L1_ANR_CON) { // Send the start confirmation message l1a_audio_send_confirmation(MMI_ANR_CON); *state = RESET; } // End process return; } break; } // switch } // while(1) } #else void l1a_mmi_anr_process(xSignalHeaderRec *msg) { enum states { RESET = 0, WAIT_REQ = 1, WAIT_CON = 2 }; UWORD8 *state = &l1a.state[L1A_ANR_STATE]; UWORD32 SignalCode = msg->SignalCode; while(1) { switch(*state) { case RESET: { // Reset the command l1a_l1s_com.anr_task.command.update = FALSE; *state = WAIT_REQ; } break; case WAIT_REQ: { if (SignalCode == MMI_ANR_REQ) { // Load the message into the l1a_l1s_com memory. l1a_l1s_com.anr_task.parameters.anr_enable = ((T_MMI_ANR_REQ *)(msg->SigP))->anr_enable; l1a_l1s_com.anr_task.parameters.min_gain = ((T_MMI_ANR_REQ *)(msg->SigP))->min_gain; l1a_l1s_com.anr_task.parameters.div_factor_shift = ((T_MMI_ANR_REQ *)(msg->SigP))->div_factor_shift; l1a_l1s_com.anr_task.parameters.ns_level = ((T_MMI_ANR_REQ *)(msg->SigP))->ns_level; // Enable the L1S task l1a_l1s_com.anr_task.command.update = TRUE; *state = WAIT_CON; } // End process return; } break; case WAIT_CON: { if (SignalCode == L1_ANR_CON) { // Send the start confirmation message l1a_audio_send_confirmation(MMI_ANR_CON); *state = RESET; } // End process return; } break; } // switch } // while(1) } #endif // L1_DYN_DSP_DWNLD #endif // L1_ANR #if (L1_ANR == 2) // ANR 2.13 /*-------------------------------------------------------*/ /* l1a_mmi_anr_process() */ /*-------------------------------------------------------*/ /* */ /* Description: */ /* ------------ */ /* This function is a state machine which handles the */ /* ANR 2.13 feature. */ /* */ /* Starting messages: MMI_AQI_ANR_REQ */ /* */ /* Result messages (input): L1_AQI_ANR_CON */ /* */ /* Result messages (output): MMI_AQI_ANR_CON */ /* */ /* Reset messages (input): none */ /* */ /* Stop message (input): none */ /* */ /* Stop message (output): none */ /* */ /*-------------------------------------------------------*/ #if(L1_DYN_DSP_DWNLD == 1) void l1a_mmi_anr_process(xSignalHeaderRec *msg) { enum states { RESET = 0, WAIT_REQ = 1, WAIT_DYN_DWNLD = 2, WAIT_CON = 3 }; UWORD8 *state = &l1a.state[L1A_ANR_STATE]; UWORD32 SignalCode = msg->SignalCode; while(1) { switch(*state) { case RESET: { // Reset the command l1a_l1s_com.anr_task.command.update = FALSE; *state = WAIT_REQ; } break; case WAIT_REQ: { if (SignalCode == MMI_AQI_ANR_REQ) { // Load the message into the l1a_l1s_com memory. l1a_l1s_com.anr_task.parameters.anr_ul_control = ((T_MMI_AQI_ANR_REQ *)(msg->SigP))->anr_ul_control; l1a_l1s_com.anr_task.parameters.control = ((T_MMI_AQI_ANR_REQ *)(msg->SigP))->parameters.control; l1a_l1s_com.anr_task.parameters.ns_level = ((T_MMI_AQI_ANR_REQ *)(msg->SigP))->parameters.ns_level; l1a_l1s_com.anr_task.parameters.tone_ene_th = ((T_MMI_AQI_ANR_REQ *)(msg->SigP))->parameters.tone_ene_th; l1a_l1s_com.anr_task.parameters.tone_cnt_th = ((T_MMI_AQI_ANR_REQ *)(msg->SigP))->parameters.tone_cnt_th; if (l1a.dyn_dwnld.semaphore_vect[ANR_STATE_MACHINE] == GREEN) { // WARNING: the following code must be copied in the state WAIT_DYN_DWNLD // when activating the task at L1s level // Enable the L1S task l1a_l1s_com.anr_task.command.update = TRUE; *state = WAIT_CON; } else { *state = WAIT_DYN_DWNLD; #if ((TRACE_TYPE == 1) || (TRACE_TYPE == 4) || (TRACE_TYPE == 5)) if((trace_info.current_config->l1_dyn_trace) & (1<<L1_DYN_TRACE_DYN_DWNLD)) { char str[30]; sprintf(str,"ANR SM blocked by DYN DWNLD\r\n"); #if(CODE_VERSION == SIMULATION) trace_fct_simu_dyn_dwnld(str); #else rvt_send_trace_cpy((T_RVT_BUFFER)str,trace_info.l1_trace_user_id,strlen(str),RVT_ASCII_FORMAT); #endif } #endif // (TRACE_TYPE == 1) || (TRACE_TYPE == 4) } } // End process return; } // omaps00090550 break; case WAIT_DYN_DWNLD: { if(SignalCode == API_L1_DYN_DWNLD_FINISHED && l1a.dyn_dwnld.semaphore_vect[ANR_STATE_MACHINE] == GREEN) { // Enable the L1S task l1a_l1s_com.anr_task.command.update = TRUE; *state = WAIT_CON; #if ((TRACE_TYPE == 1) || (TRACE_TYPE == 4) || (TRACE_TYPE == 5)) if((trace_info.current_config->l1_dyn_trace) & (1<<L1_DYN_TRACE_DYN_DWNLD)) { char str[30]; sprintf(str,"ANR SM un-blocked\r\n"); #if(CODE_VERSION == SIMULATION) trace_fct_simu_dyn_dwnld(str); #else rvt_send_trace_cpy((T_RVT_BUFFER)str,trace_info.l1_trace_user_id,strlen(str),RVT_ASCII_FORMAT); #endif } #endif // (TRACE_TYPE == 1) || (TRACE_TYPE == 4) } return; } // omaps00090550 break; case WAIT_CON: { if (SignalCode == L1_AQI_ANR_CON) { // Send the confirmation message l1a_audio_send_result(MMI_AQI_ANR_CON, msg, MMI_QUEUE); *state = RESET; } // End process return; } // omaps00090550 break; } // switch } // while(1) } #else void l1a_mmi_anr_process(xSignalHeaderRec *msg) { enum states { RESET = 0, WAIT_REQ = 1, WAIT_CON = 2 }; UWORD8 *state = &l1a.state[L1A_ANR_STATE]; UWORD32 SignalCode = msg->SignalCode; while(1) { switch(*state) { case RESET: { // Reset the command l1a_l1s_com.anr_task.command.update = FALSE; *state = WAIT_REQ; } break; case WAIT_REQ: { if (SignalCode == MMI_AQI_ANR_REQ) { // Load the message into the l1a_l1s_com memory. l1a_l1s_com.anr_task.parameters.anr_ul_control = ((T_MMI_AQI_ANR_REQ *)(msg->SigP))->anr_ul_control; l1a_l1s_com.anr_task.parameters.control = ((T_MMI_AQI_ANR_REQ *)(msg->SigP))->parameters.control; l1a_l1s_com.anr_task.parameters.ns_level = ((T_MMI_AQI_ANR_REQ *)(msg->SigP))->parameters.ns_level; l1a_l1s_com.anr_task.parameters.tone_ene_th = ((T_MMI_AQI_ANR_REQ *)(msg->SigP))->parameters.tone_ene_th; l1a_l1s_com.anr_task.parameters.tone_cnt_th = ((T_MMI_AQI_ANR_REQ *)(msg->SigP))->parameters.tone_cnt_th; // Enable the L1S task l1a_l1s_com.anr_task.command.update = TRUE; *state = WAIT_CON; } // End process return; } break; case WAIT_CON: { if (SignalCode == L1_AQI_ANR_CON) { // Send the confirmation message l1a_audio_send_result(MMI_AQI_ANR_CON, msg, MMI_QUEUE); *state = RESET; } // End process return; } break; } // switch } // while(1) } #endif // L1_DYN_DSP_DWNLD #endif // L1_ANR #if (L1_IIR == 1) /*-------------------------------------------------------*/ /* l1a_mmi_iir_process() */ /*-------------------------------------------------------*/ /* */ /* Description: */ /* ------------ */ /* This function is a state machine which handles the */ /* IIR feature. */ /* */ /* Starting messages: MMI_IIR_REQ */ /* */ /* Result messages (input): L1_IIR_CON */ /* */ /* Result messages (output): MMI_IIR_CON */ /* */ /* Reset messages (input): none */ /* */ /* Stop message (input): none */ /* */ /* Stop message (output): none */ /* */ /*-------------------------------------------------------*/ void l1a_mmi_iir_process(xSignalHeaderRec *msg) { enum states { RESET = 0, WAIT_REQ = 1, WAIT_CON = 2 }; UWORD8 *state = &l1a.state[L1A_IIR_STATE]; UWORD32 SignalCode = msg->SignalCode; while(1) { switch(*state) { case RESET: { // Reset the command l1a_l1s_com.iir_task.command.update = FALSE; *state = WAIT_REQ; } break; case WAIT_REQ: { if (SignalCode == MMI_IIR_REQ) { // Load the message into the l1a_l1s_com memory. l1a_l1s_com.iir_task.parameters.iir_enable = ((T_MMI_IIR_REQ *)(msg->SigP))->iir_enable; l1a_l1s_com.iir_task.parameters.nb_iir_blocks = ((T_MMI_IIR_REQ *)(msg->SigP))->nb_iir_blocks; l1a_l1s_com.iir_task.parameters.iir_coefs = ((T_MMI_IIR_REQ *)(msg->SigP))->iir_coefs; l1a_l1s_com.iir_task.parameters.nb_fir_coefs = ((T_MMI_IIR_REQ *)(msg->SigP))->nb_fir_coefs; l1a_l1s_com.iir_task.parameters.fir_coefs = ((T_MMI_IIR_REQ *)(msg->SigP))->fir_coefs; l1a_l1s_com.iir_task.parameters.input_scaling = ((T_MMI_IIR_REQ *)(msg->SigP))->input_scaling; l1a_l1s_com.iir_task.parameters.fir_scaling = ((T_MMI_IIR_REQ *)(msg->SigP))->fir_scaling; l1a_l1s_com.iir_task.parameters.input_gain_scaling = ((T_MMI_IIR_REQ *)(msg->SigP))->input_gain_scaling; l1a_l1s_com.iir_task.parameters.output_gain_scaling = ((T_MMI_IIR_REQ *)(msg->SigP))->output_gain_scaling; l1a_l1s_com.iir_task.parameters.output_gain = ((T_MMI_IIR_REQ *)(msg->SigP))->output_gain; l1a_l1s_com.iir_task.parameters.feedback = ((T_MMI_IIR_REQ *)(msg->SigP))->feedback; // Enable the L1S task l1a_l1s_com.iir_task.command.update = TRUE; *state = WAIT_CON; } // End process return; } break; case WAIT_CON: { if (SignalCode == L1_IIR_CON) { // Send the start confirmation message l1a_audio_send_confirmation(MMI_IIR_CON); *state = RESET; } // End process return; } break; } // switch } // while(1) } #endif // L1_IIR #if (L1_AGC_UL == 1) /*-------------------------------------------------------*/ /* l1a_mmi_agc_ul_process() */ /*-------------------------------------------------------*/ /* */ /* Description: */ /* ------------ */ /* This function is a state machine which handles the */ /* AGC UL feature. */ /* */ /* Starting messages: MMI_AQI_AGC_UL_REQ */ /* */ /* Result messages (input): L1_AQI_AGC_UL_CON */ /* */ /* Result messages (output): MMI_AQI_AGC_UL_CON */ /* */ /* Reset messages (input): none */ /* */ /* Stop message (input): none */ /* */ /* Stop message (output): none */ /* */ /*-------------------------------------------------------*/ #if(L1_DYN_DSP_DWNLD == 1) void l1a_mmi_agc_ul_process(xSignalHeaderRec *msg) { enum states { RESET = 0, WAIT_REQ = 1, WAIT_DYN_DWNLD = 2, WAIT_CON = 3 }; UWORD8 *state = &l1a.state[L1A_AGC_UL_STATE]; UWORD32 SignalCode = msg->SignalCode; while(1) { switch(*state) { case RESET: { // Reset the command l1a_l1s_com.agc_ul_task.command.update = FALSE; *state = WAIT_REQ; } break; case WAIT_REQ: { if (SignalCode == MMI_AQI_AGC_UL_REQ) { // Load the message into the l1a_l1s_com memory. l1a_l1s_com.agc_ul_task.parameters.agc_ul_control = ((T_MMI_AQI_AGC_UL_REQ *)(msg->SigP))->agc_ul_control; l1a_l1s_com.agc_ul_task.parameters.control = ((T_MMI_AQI_AGC_UL_REQ *)(msg->SigP))->parameters.control; l1a_l1s_com.agc_ul_task.parameters.frame_size = ((T_MMI_AQI_AGC_UL_REQ *)(msg->SigP))->parameters.frame_size; l1a_l1s_com.agc_ul_task.parameters.targeted_level = ((T_MMI_AQI_AGC_UL_REQ *)(msg->SigP))->parameters.targeted_level; l1a_l1s_com.agc_ul_task.parameters.signal_up = ((T_MMI_AQI_AGC_UL_REQ *)(msg->SigP))->parameters.signal_up; l1a_l1s_com.agc_ul_task.parameters.signal_down = ((T_MMI_AQI_AGC_UL_REQ *)(msg->SigP))->parameters.signal_down; l1a_l1s_com.agc_ul_task.parameters.max_scale = ((T_MMI_AQI_AGC_UL_REQ *)(msg->SigP))->parameters.max_scale; l1a_l1s_com.agc_ul_task.parameters.gain_smooth_alpha = ((T_MMI_AQI_AGC_UL_REQ *)(msg->SigP))->parameters.gain_smooth_alpha; l1a_l1s_com.agc_ul_task.parameters.gain_smooth_alpha_fast = ((T_MMI_AQI_AGC_UL_REQ *)(msg->SigP))->parameters.gain_smooth_alpha_fast; l1a_l1s_com.agc_ul_task.parameters.gain_smooth_beta = ((T_MMI_AQI_AGC_UL_REQ *)(msg->SigP))->parameters.gain_smooth_beta; l1a_l1s_com.agc_ul_task.parameters.gain_smooth_beta_fast = ((T_MMI_AQI_AGC_UL_REQ *)(msg->SigP))->parameters.gain_smooth_beta_fast; l1a_l1s_com.agc_ul_task.parameters.gain_intp_flag = ((T_MMI_AQI_AGC_UL_REQ *)(msg->SigP))->parameters.gain_intp_flag; if (l1a.dyn_dwnld.semaphore_vect[AGC_UL_STATE_MACHINE] == GREEN) { // WARNING: the following code must be copied in the state WAIT_DYN_DWNLD // when activating the task at L1s level // Enable the L1S task l1a_l1s_com.agc_ul_task.command.update = TRUE; *state = WAIT_CON; } else { *state = WAIT_DYN_DWNLD; #if ((TRACE_TYPE == 1) || (TRACE_TYPE == 4) || (TRACE_TYPE == 5)) if((trace_info.current_config->l1_dyn_trace) & (1<<L1_DYN_TRACE_DYN_DWNLD)) { char str[30]; sprintf(str,"AGC_UL SM blocked by DYN DWNLD\r\n"); #if(CODE_VERSION == SIMULATION) trace_fct_simu_dyn_dwnld(str); #else rvt_send_trace_cpy((T_RVT_BUFFER)str,trace_info.l1_trace_user_id,strlen(str),RVT_ASCII_FORMAT); #endif } #endif // (TRACE_TYPE == 1) || (TRACE_TYPE == 4) } } // End process return; } // omaps00090550 break; case WAIT_DYN_DWNLD: { if(SignalCode == API_L1_DYN_DWNLD_FINISHED && l1a.dyn_dwnld.semaphore_vect[AGC_UL_STATE_MACHINE] == GREEN) { // Enable the L1S task l1a_l1s_com.agc_ul_task.command.update = TRUE; *state = WAIT_CON; #if ((TRACE_TYPE == 1) || (TRACE_TYPE == 4) || (TRACE_TYPE == 5)) if((trace_info.current_config->l1_dyn_trace) & (1<<L1_DYN_TRACE_DYN_DWNLD)) { char str[30]; sprintf(str,"AGC_UL SM un-blocked\r\n"); #if(CODE_VERSION == SIMULATION) trace_fct_simu_dyn_dwnld(str); #else rvt_send_trace_cpy((T_RVT_BUFFER)str,trace_info.l1_trace_user_id,strlen(str),RVT_ASCII_FORMAT); #endif } #endif // (TRACE_TYPE == 1) || (TRACE_TYPE == 4) } return; } // omaps00090550 break; case WAIT_CON: { if (SignalCode == L1_AQI_AGC_UL_CON) { // Send the start confirmation message l1a_audio_send_result(MMI_AQI_AGC_UL_CON, msg, MMI_QUEUE); *state = RESET; } // End process return; } // omaps00090550 break; } // switch } // while(1) } #else void l1a_mmi_agc_ul_process(xSignalHeaderRec *msg) { enum states { RESET = 0, WAIT_REQ = 1, WAIT_CON = 2 }; UWORD8 *state = &l1a.state[L1A_AGC_UL_STATE]; UWORD32 SignalCode = msg->SignalCode; while(1) { switch(*state) { case RESET: { // Reset the command l1a_l1s_com.agc_ul_task.command.update = FALSE; *state = WAIT_REQ; } break; case WAIT_REQ: { if (SignalCode == MMI_AQI_AGC_UL_REQ) { // Load the message into the l1a_l1s_com memory. l1a_l1s_com.agc_ul_task.parameters.agc_ul_control = ((T_MMI_AQI_AGC_UL_REQ *)(msg->SigP))->agc_ul_control; l1a_l1s_com.agc_ul_task.parameters.control = ((T_MMI_AQI_AGC_UL_REQ *)(msg->SigP))->parameters.control; l1a_l1s_com.agc_ul_task.parameters.frame_size = ((T_MMI_AQI_AGC_UL_REQ *)(msg->SigP))->parameters.frame_size; l1a_l1s_com.agc_ul_task.parameters.targeted_level = ((T_MMI_AQI_AGC_UL_REQ *)(msg->SigP))->parameters.targeted_level; l1a_l1s_com.agc_ul_task.parameters.signal_up = ((T_MMI_AQI_AGC_UL_REQ *)(msg->SigP))->parameters.signal_up; l1a_l1s_com.agc_ul_task.parameters.signal_down = ((T_MMI_AQI_AGC_UL_REQ *)(msg->SigP))->parameters.signal_down; l1a_l1s_com.agc_ul_task.parameters.max_scale = ((T_MMI_AQI_AGC_UL_REQ *)(msg->SigP))->parameters.max_scale; l1a_l1s_com.agc_ul_task.parameters.gain_smooth_alpha = ((T_MMI_AQI_AGC_UL_REQ *)(msg->SigP))->parameters.gain_smooth_alpha; l1a_l1s_com.agc_ul_task.parameters.gain_smooth_alpha_fast = ((T_MMI_AQI_AGC_UL_REQ *)(msg->SigP))->parameters.gain_smooth_alpha_fast; l1a_l1s_com.agc_ul_task.parameters.gain_smooth_beta = ((T_MMI_AQI_AGC_UL_REQ *)(msg->SigP))->parameters.gain_smooth_beta; l1a_l1s_com.agc_ul_task.parameters.gain_smooth_beta_fast = ((T_MMI_AQI_AGC_UL_REQ *)(msg->SigP))->parameters.gain_smooth_beta_fast; l1a_l1s_com.agc_ul_task.parameters.gain_intp_flag = ((T_MMI_AQI_AGC_UL_REQ *)(msg->SigP))->parameters.gain_intp_flag; // Enable the L1S task l1a_l1s_com.agc_ul_task.command.update = TRUE; *state = WAIT_CON; } // End process return; } break; case WAIT_CON: { if (SignalCode == L1_AQI_AGC_UL_CON) { // Send the start confirmation message l1a_audio_send_result(MMI_AQI_AGC_UL_CON, msg, MMI_QUEUE); *state = RESET; } // End process return; } break; } // switch } // while(1) } #endif // L1_DYN_DSP_DWNLD #endif // L1_AGC_UL #if (L1_AGC_DL == 1) /*-------------------------------------------------------*/ /* l1a_mmi_agc_dl_process() */ /*-------------------------------------------------------*/ /* */ /* Description: */ /* ------------ */ /* This function is a state machine which handles the */ /* AGC DL feature. */ /* */ /* Starting messages: MMI_AQI_AGC_DL_REQ */ /* */ /* Result messages (input): L1_AQI_AGC_DL_CON */ /* */ /* Result messages (output): MMI_AQI_AGC_DL_CON */ /* */ /* Reset messages (input): none */ /* */ /* Stop message (input): none */ /* */ /* Stop message (output): none */ /* */ /*-------------------------------------------------------*/ #if(L1_DYN_DSP_DWNLD == 1) void l1a_mmi_agc_dl_process(xSignalHeaderRec *msg) { enum states { RESET = 0, WAIT_REQ = 1, WAIT_DYN_DWNLD = 2, WAIT_CON = 3 }; UWORD8 *state = &l1a.state[L1A_AGC_DL_STATE]; UWORD32 SignalCode = msg->SignalCode; while(1) { switch(*state) { case RESET: { // Reset the command l1a_l1s_com.agc_dl_task.command.update = FALSE; *state = WAIT_REQ; } break; case WAIT_REQ: { if (SignalCode == MMI_AQI_AGC_DL_REQ) { // Load the message into the l1a_l1s_com memory. l1a_l1s_com.agc_dl_task.parameters.agc_dl_control = ((T_MMI_AQI_AGC_DL_REQ *)(msg->SigP))->agc_dl_control; l1a_l1s_com.agc_dl_task.parameters.control = ((T_MMI_AQI_AGC_DL_REQ *)(msg->SigP))->parameters.control; l1a_l1s_com.agc_dl_task.parameters.frame_size = ((T_MMI_AQI_AGC_DL_REQ *)(msg->SigP))->parameters.frame_size; l1a_l1s_com.agc_dl_task.parameters.targeted_level = ((T_MMI_AQI_AGC_DL_REQ *)(msg->SigP))->parameters.targeted_level; l1a_l1s_com.agc_dl_task.parameters.signal_up = ((T_MMI_AQI_AGC_DL_REQ *)(msg->SigP))->parameters.signal_up; l1a_l1s_com.agc_dl_task.parameters.signal_down = ((T_MMI_AQI_AGC_DL_REQ *)(msg->SigP))->parameters.signal_down; l1a_l1s_com.agc_dl_task.parameters.max_scale = ((T_MMI_AQI_AGC_DL_REQ *)(msg->SigP))->parameters.max_scale; l1a_l1s_com.agc_dl_task.parameters.gain_smooth_alpha = ((T_MMI_AQI_AGC_DL_REQ *)(msg->SigP))->parameters.gain_smooth_alpha; l1a_l1s_com.agc_dl_task.parameters.gain_smooth_alpha_fast = ((T_MMI_AQI_AGC_DL_REQ *)(msg->SigP))->parameters.gain_smooth_alpha_fast; l1a_l1s_com.agc_dl_task.parameters.gain_smooth_beta = ((T_MMI_AQI_AGC_DL_REQ *)(msg->SigP))->parameters.gain_smooth_beta; l1a_l1s_com.agc_dl_task.parameters.gain_smooth_beta_fast = ((T_MMI_AQI_AGC_DL_REQ *)(msg->SigP))->parameters.gain_smooth_beta_fast; l1a_l1s_com.agc_dl_task.parameters.gain_intp_flag = ((T_MMI_AQI_AGC_DL_REQ *)(msg->SigP))->parameters.gain_intp_flag; if (l1a.dyn_dwnld.semaphore_vect[AGC_DL_STATE_MACHINE] == GREEN) { // WARNING: the following code must be copied in the state WAIT_DYN_DWNLD // when activating the task at L1s level // Enable the L1S task l1a_l1s_com.agc_dl_task.command.update = TRUE; *state = WAIT_CON; } else { *state = WAIT_DYN_DWNLD; #if ((TRACE_TYPE == 1) || (TRACE_TYPE == 4) || (TRACE_TYPE == 5)) if((trace_info.current_config->l1_dyn_trace) & (1<<L1_DYN_TRACE_DYN_DWNLD)) { char str[30]; sprintf(str,"AGC_DL SM blocked by DYN DWNLD\r\n"); #if(CODE_VERSION == SIMULATION) trace_fct_simu_dyn_dwnld(str); #else rvt_send_trace_cpy((T_RVT_BUFFER)str,trace_info.l1_trace_user_id,strlen(str),RVT_ASCII_FORMAT); #endif } #endif // (TRACE_TYPE == 1) || (TRACE_TYPE == 4) } } // End process return; } // omaps00090550 break; case WAIT_DYN_DWNLD: { if(SignalCode == API_L1_DYN_DWNLD_FINISHED && l1a.dyn_dwnld.semaphore_vect[AGC_DL_STATE_MACHINE] == GREEN) { // Enable the L1S task l1a_l1s_com.agc_dl_task.command.update = TRUE; *state = WAIT_CON; #if ((TRACE_TYPE == 1) || (TRACE_TYPE == 4) || (TRACE_TYPE == 5)) if((trace_info.current_config->l1_dyn_trace) & (1<<L1_DYN_TRACE_DYN_DWNLD)) { char str[30]; sprintf(str,"AGC_DL SM un-blocked\r\n"); #if(CODE_VERSION == SIMULATION) trace_fct_simu_dyn_dwnld(str); #else rvt_send_trace_cpy((T_RVT_BUFFER)str,trace_info.l1_trace_user_id,strlen(str),RVT_ASCII_FORMAT); #endif } #endif // (TRACE_TYPE == 1) || (TRACE_TYPE == 4) } return; } // omaps00090550 break; case WAIT_CON: { if (SignalCode == L1_AQI_AGC_DL_CON) { // Send the start confirmation message l1a_audio_send_result(MMI_AQI_AGC_DL_CON, msg, MMI_QUEUE); *state = RESET; } // End process return; } // omaps00090550 break; } // switch } // while(1) } #else void l1a_mmi_agc_dl_process(xSignalHeaderRec *msg) { enum states { RESET = 0, WAIT_REQ = 1, WAIT_CON = 2 }; UWORD8 *state = &l1a.state[L1A_AGC_DL_STATE]; UWORD32 SignalCode = msg->SignalCode; while(1) { switch(*state) { case RESET: { // Reset the command l1a_l1s_com.agc_dl_task.command.update = FALSE; *state = WAIT_REQ; } break; case WAIT_REQ: { if (SignalCode == MMI_AQI_AGC_DL_REQ) { // Load the message into the l1a_l1s_com memory. l1a_l1s_com.agc_dl_task.parameters.agc_dl_control = ((T_MMI_AQI_AGC_DL_REQ *)(msg->SigP))->agc_dl_control; l1a_l1s_com.agc_dl_task.parameters.control = ((T_MMI_AQI_AGC_DL_REQ *)(msg->SigP))->parameters.control; l1a_l1s_com.agc_dl_task.parameters.frame_size = ((T_MMI_AQI_AGC_DL_REQ *)(msg->SigP))->parameters.frame_size; l1a_l1s_com.agc_dl_task.parameters.targeted_level = ((T_MMI_AQI_AGC_DL_REQ *)(msg->SigP))->parameters.targeted_level; l1a_l1s_com.agc_dl_task.parameters.signal_up = ((T_MMI_AQI_AGC_DL_REQ *)(msg->SigP))->parameters.signal_up; l1a_l1s_com.agc_dl_task.parameters.signal_down = ((T_MMI_AQI_AGC_DL_REQ *)(msg->SigP))->parameters.signal_down; l1a_l1s_com.agc_dl_task.parameters.max_scale = ((T_MMI_AQI_AGC_DL_REQ *)(msg->SigP))->parameters.max_scale; l1a_l1s_com.agc_dl_task.parameters.gain_smooth_alpha = ((T_MMI_AQI_AGC_DL_REQ *)(msg->SigP))->parameters.gain_smooth_alpha; l1a_l1s_com.agc_dl_task.parameters.gain_smooth_alpha_fast = ((T_MMI_AQI_AGC_DL_REQ *)(msg->SigP))->parameters.gain_smooth_alpha_fast; l1a_l1s_com.agc_dl_task.parameters.gain_smooth_beta = ((T_MMI_AQI_AGC_DL_REQ *)(msg->SigP))->parameters.gain_smooth_beta; l1a_l1s_com.agc_dl_task.parameters.gain_smooth_beta_fast = ((T_MMI_AQI_AGC_DL_REQ *)(msg->SigP))->parameters.gain_smooth_beta_fast; l1a_l1s_com.agc_dl_task.parameters.gain_intp_flag = ((T_MMI_AQI_AGC_DL_REQ *)(msg->SigP))->parameters.gain_intp_flag; // Enable the L1S task l1a_l1s_com.agc_dl_task.command.update = TRUE; *state = WAIT_CON; } // End process return; } break; case WAIT_CON: { if (SignalCode == L1_AQI_AGC_DL_CON) { // Send the start confirmation message l1a_audio_send_result(MMI_AQI_AGC_DL_CON, msg, MMI_QUEUE); *state = RESET; } // End process return; } break; } // switch } // while(1) } #endif // L1_DYN_DSP_DWNLD #endif // L1_AGC_DL #if (L1_IIR == 2) /*-------------------------------------------------------*/ /* l1a_mmi_iir_process() */ /*-------------------------------------------------------*/ /* */ /* Description: */ /* ------------ */ /* This function is a state machine which handles the */ /* IIR feature. */ /* */ /* Starting messages: MMI_AQI_IIR_DL_REQ */ /* */ /* Result messages (input): L1_AQI_IIR_DL_CON */ /* */ /* Result messages (output): MMI_AQI_IIR_DL_CON */ /* */ /* Reset messages (input): none */ /* */ /* Stop message (input): none */ /* */ /* Stop message (output): none */ /* */ /*-------------------------------------------------------*/ void l1a_mmi_iir_process(xSignalHeaderRec *msg) { enum states { RESET = 0, WAIT_REQ = 1, WAIT_CON = 2 }; UWORD8 *state = &l1a.state[L1A_IIR_STATE]; UWORD32 SignalCode = msg->SignalCode; while(1) { switch(*state) { case RESET: { // Reset the command l1a_l1s_com.iir_task.command.update = FALSE; *state = WAIT_REQ; } break; case WAIT_REQ: { if (SignalCode == MMI_AQI_IIR_DL_REQ) { l1a.iir_req_msg_ptr = msg; l1a.l1_msg_forwarded = TRUE; // Load the message into the l1a_l1s_com memory. l1a_l1s_com.iir_task.parameters = (T_MMI_AQI_IIR_DL_REQ *) (msg->SigP); // Enable the L1S task l1a_l1s_com.iir_task.command.update = TRUE; *state = WAIT_CON; } // End process return; } // omaps00090550 break; case WAIT_CON: { if (SignalCode == L1_AQI_IIR_DL_CON) { os_free_sig(l1a.iir_req_msg_ptr); // Send the start confirmation message l1a_audio_send_result(MMI_AQI_IIR_DL_CON, msg, MMI_QUEUE); *state = RESET; } // End process return; } // omaps00090550 break; } // switch } // while(1) } #endif // L1_IIR #if (L1_WCM == 1) /*-------------------------------------------------------*/ /* l1a_mmi_wcm_process() */ /*-------------------------------------------------------*/ /* */ /* Description: */ /* ------------ */ /* This function is a state machine which handles the */ /* WCM feature. */ /* */ /* Starting messages: MMI_AQI_WCM_REQ */ /* */ /* Result messages (input): L1_AQI_WCM_CON */ /* */ /* Result messages (output): MMI_AQI_WCM_CON */ /* */ /* Reset messages (input): none */ /* */ /* Stop message (input): none */ /* */ /* Stop message (output): none */ /* */ /*-------------------------------------------------------*/ #if(L1_DYN_DSP_DWNLD == 1) void l1a_mmi_wcm_process(xSignalHeaderRec *msg) { enum states { RESET = 0, WAIT_REQ = 1, WAIT_DYN_DWNLD = 2, WAIT_CON = 3 }; UWORD8 *state = &l1a.state[L1A_WCM_STATE]; UWORD32 SignalCode = msg->SignalCode; while(1) { switch(*state) { case RESET: { // Reset the command l1a_l1s_com.wcm_task.command.update = FALSE; *state = WAIT_REQ; } break; case WAIT_REQ: { if (SignalCode == MMI_AQI_WCM_REQ) { l1a.wcm_req_msg_ptr = msg; l1a.l1_msg_forwarded = TRUE; // Load the message into the l1a_l1s_com memory l1a_l1s_com.wcm_task.parameters = (T_MMI_AQI_WCM_REQ *) (msg->SigP); if (l1a.dyn_dwnld.semaphore_vect[WCM_STATE_MACHINE] == GREEN) { // WARNING: the following code must be copied in the state WAIT_DYN_DWNLD // when activating the task at L1s level // Enable the L1S task l1a_l1s_com.wcm_task.command.update = TRUE; *state = WAIT_CON; } else { *state = WAIT_DYN_DWNLD; #if ((TRACE_TYPE == 1) || (TRACE_TYPE == 4) || (TRACE_TYPE == 5)) if((trace_info.current_config->l1_dyn_trace) & (1<<L1_DYN_TRACE_DYN_DWNLD)) { char str[30]; sprintf(str,"WCM SM blocked by DYN DWNLD\r\n"); #if(CODE_VERSION == SIMULATION) trace_fct_simu_dyn_dwnld(str); #else rvt_send_trace_cpy((T_RVT_BUFFER)str,trace_info.l1_trace_user_id,strlen(str),RVT_ASCII_FORMAT); #endif } #endif // (TRACE_TYPE == 1) || (TRACE_TYPE == 4) } } // End process return; } // omaps00090550 break; case WAIT_DYN_DWNLD: { if(SignalCode == API_L1_DYN_DWNLD_FINISHED && l1a.dyn_dwnld.semaphore_vect[WCM_STATE_MACHINE] == GREEN) { // Enable the L1S task l1a_l1s_com.wcm_task.command.update = TRUE; *state = WAIT_CON; #if ((TRACE_TYPE == 1) || (TRACE_TYPE == 4) || (TRACE_TYPE == 5)) if((trace_info.current_config->l1_dyn_trace) & (1<<L1_DYN_TRACE_DYN_DWNLD)) { char str[30]; sprintf(str,"WCM SM un-blocked\r\n"); #if(CODE_VERSION == SIMULATION) trace_fct_simu_dyn_dwnld(str); #else rvt_send_trace_cpy((T_RVT_BUFFER)str,trace_info.l1_trace_user_id,strlen(str),RVT_ASCII_FORMAT); #endif } #endif // (TRACE_TYPE == 1) || (TRACE_TYPE == 4) } return; } // omaps00090550 break; case WAIT_CON: { if (SignalCode == L1_AQI_WCM_CON) { os_free_sig(l1a.wcm_req_msg_ptr); // Send the start confirmation message l1a_audio_send_result(MMI_AQI_WCM_CON, msg, MMI_QUEUE); *state = RESET; } // End process return; } // omaps00090550 break; } // switch } // while(1) } #else void l1a_mmi_wcm_process(xSignalHeaderRec *msg) { enum states { RESET = 0, WAIT_REQ = 1, WAIT_CON = 2 }; UWORD8 *state = &l1a.state[L1A_WCM_STATE]; UWORD32 SignalCode = msg->SignalCode; while(1) { switch(*state) { case RESET: { // Reset the command l1a_l1s_com.wcm_task.command.update = FALSE; *state = WAIT_REQ; } break; case WAIT_REQ: { if (SignalCode == MMI_AQI_WCM_REQ) { l1a.wcm_req_msg_ptr = msg; l1a.l1_msg_forwarded = TRUE; // Load the message into the l1a_l1s_com memory. l1a_l1s_com.wcm_task.parameters = (T_MMI_AQI_WCM_REQ *) (msg->SigP); // Enable the L1S task l1a_l1s_com.wcm_task.command.update = TRUE; *state = WAIT_CON; } // End process return; } break; case WAIT_CON: { if (SignalCode == L1_AQI_WCM_CON) { os_free_sig(l1a.wcm_req_msg_ptr); // Send the start confirmation message l1a_audio_send_result(MMI_AQI_WCM_CON, msg, MMI_QUEUE); *state = RESET; } // End process return; } break; } // switch } // while(1) } #endif // L1_DYN_DSP_DWNLD #endif // L1_WCM #if (L1_DRC == 1) // DRC 1.x // DRC NDB API T_DRC_MCU_DSP *drc_ndb; #if (CODE_VERSION == SIMULATION) T_DRC_MCU_DSP drc_ndb_sim; #endif /*-------------------------------------------------------*/ /* l1a_mmi_drc_process() */ /*-------------------------------------------------------*/ /* */ /* Description: */ /* ------------ */ /* This function is a state machine which handles the */ /* DRC 1.x feature. */ /* */ /* Starting messages: MMI_AQI_DRC_REQ */ /* */ /* Result messages (input): L1_AQI_DRC_CON */ /* */ /* Result messages (output): MMI_AQI_DRC_CON */ /* */ /* Reset messages (input): none */ /* */ /* Stop message (input): none */ /* */ /* Stop message (output): none */ /* */ /*-------------------------------------------------------*/ #if(L1_DYN_DSP_DWNLD == 1) void l1a_mmi_drc_process(xSignalHeaderRec *msg) { enum states { RESET = 0, WAIT_REQ = 1, WAIT_DYN_DWNLD = 2, WAIT_CON = 3 }; UWORD8 *state = &l1a.state[L1A_DRC_STATE]; UWORD32 SignalCode = msg->SignalCode; while(1) { switch(*state) { case RESET: { // Reset the command l1a_l1s_com.drc_task.command.update = FALSE; *state = WAIT_REQ; } break; case WAIT_REQ: { if (SignalCode == MMI_AQI_DRC_REQ) { l1a.drc_req_msg_ptr = msg; l1a.l1_msg_forwarded = TRUE; // Load the message into the l1a_l1s_com memory. l1a_l1s_com.drc_task.parameters = (T_MMI_AQI_DRC_REQ *) (msg->SigP); if (l1a.dyn_dwnld.semaphore_vect[DRC_STATE_MACHINE] == GREEN) { // WARNING: the following code must be copied in the state WAIT_DYN_DWNLD // when activating the task at L1s level // Enable the L1S task l1a_l1s_com.drc_task.command.update = TRUE; *state = WAIT_CON; } else { *state = WAIT_DYN_DWNLD; #if ((TRACE_TYPE == 1) || (TRACE_TYPE == 4) || (TRACE_TYPE == 5)) if((trace_info.current_config->l1_dyn_trace) & (1<<L1_DYN_TRACE_DYN_DWNLD)) { char str[30]; sprintf(str,"DRC SM blocked by DYN DWNLD\r\n"); #if(CODE_VERSION == SIMULATION) trace_fct_simu_dyn_dwnld(str); #else rvt_send_trace_cpy((T_RVT_BUFFER)str,trace_info.l1_trace_user_id,strlen(str),RVT_ASCII_FORMAT); #endif } #endif // (TRACE_TYPE == 1) || (TRACE_TYPE == 4) } } // End process return; } // omaps00090550 break; case WAIT_DYN_DWNLD: { if(SignalCode == API_L1_DYN_DWNLD_FINISHED && l1a.dyn_dwnld.semaphore_vect[DRC_STATE_MACHINE] == GREEN) { // Enable the L1S task l1a_l1s_com.drc_task.command.update = TRUE; *state = WAIT_CON; #if ((TRACE_TYPE == 1) || (TRACE_TYPE == 4) || (TRACE_TYPE == 5)) if((trace_info.current_config->l1_dyn_trace) & (1<<L1_DYN_TRACE_DYN_DWNLD)) { char str[30]; sprintf(str,"DRC SM un-blocked\r\n"); #if(CODE_VERSION == SIMULATION) trace_fct_simu_dyn_dwnld(str); #else rvt_send_trace_cpy((T_RVT_BUFFER)str,trace_info.l1_trace_user_id,strlen(str),RVT_ASCII_FORMAT); #endif } #endif // (TRACE_TYPE == 1) || (TRACE_TYPE == 4) } return; } // omaps00090550 break; case WAIT_CON: { if (SignalCode == L1_AQI_DRC_CON) { os_free_sig(l1a.drc_req_msg_ptr); // Send the confirmation message l1a_audio_send_result(MMI_AQI_DRC_CON, msg, MMI_QUEUE); *state = RESET; } // End process return; } // omaps00090550 break; } // switch } // while(1) } #else void l1a_mmi_drc_process(xSignalHeaderRec *msg) { enum states { RESET = 0, WAIT_REQ = 1, WAIT_CON = 2 }; UWORD8 *state = &l1a.state[L1A_DRC_STATE]; UWORD32 SignalCode = msg->SignalCode; while(1) { switch(*state) { case RESET: { // Reset the command l1a_l1s_com.drc_task.command.update = FALSE; *state = WAIT_REQ; } break; case WAIT_REQ: { if (SignalCode == MMI_AQI_DRC_REQ) { l1a.drc_req_msg_ptr = msg; l1a.l1_msg_forwarded = TRUE; // Load the message into the l1a_l1s_com memory. l1a_l1s_com.drc_task.parameters = (T_MMI_AQI_DRC_REQ *) (msg->SigP); // Enable the L1S task l1a_l1s_com.drc_task.command.update = TRUE; *state = WAIT_CON; } // End process return; } break; case WAIT_CON: { if (SignalCode == L1_AQI_DRC_CON) { os_free_sig(l1a.drc_req_msg_ptr); // Send the confirmation message l1a_audio_send_result(MMI_AQI_DRC_CON, msg, MMI_QUEUE); *state = RESET; } // End process return; } break; } // switch } // while(1) } #endif // L1_DYN_DSP_DWNLD #endif // L1_DRC #if (L1_LIMITER == 1) /*-------------------------------------------------------*/ /* l1a_mmi_limiter_process() */ /*-------------------------------------------------------*/ /* */ /* Description: */ /* ------------ */ /* This function is a state machine which handles the */ /* LIMITER feature. */ /* */ /* Starting messages: MMI_LIMITER_REQ */ /* */ /* Result messages (input): L1_LIMITER_CON */ /* */ /* Result messages (output): MMI_LIMITER_CON */ /* */ /* Reset messages (input): none */ /* */ /* Stop message (input): none */ /* */ /* Stop message (output): none */ /* */ /*-------------------------------------------------------*/ void l1a_mmi_limiter_process(xSignalHeaderRec *msg) { enum states { RESET = 0, WAIT_REQ = 1, WAIT_CON = 2 }; UWORD8 *state = &l1a.state[L1A_LIMITER_STATE]; UWORD32 SignalCode = msg->SignalCode; while(1) { switch(*state) { case RESET: { // Reset the commands l1a_l1s_com.limiter_task.command.update = FALSE; l1a_l1s_com.limiter_task.command.partial_update = FALSE; *state = WAIT_REQ; } break; case WAIT_REQ: { if (SignalCode == MMI_LIMITER_REQ) { // Load the message into the l1a_l1s_com memory. l1a_l1s_com.limiter_task.parameters.limiter_enable = ((T_MMI_LIMITER_REQ *)(msg->SigP))->limiter_enable; l1a_l1s_com.limiter_task.parameters.block_size = ((T_MMI_LIMITER_REQ *)(msg->SigP))->block_size; l1a_l1s_com.limiter_task.parameters.slope_update_period = ((T_MMI_LIMITER_REQ *)(msg->SigP))->slope_update_period; l1a_l1s_com.limiter_task.parameters.nb_fir_coefs = ((T_MMI_LIMITER_REQ *)(msg->SigP))->nb_fir_coefs; l1a_l1s_com.limiter_task.parameters.filter_coefs = ((T_MMI_LIMITER_REQ *)(msg->SigP))->filter_coefs; l1a_l1s_com.limiter_task.parameters.thr_low_0 = ((T_MMI_LIMITER_REQ *)(msg->SigP))->thr_low_0; l1a_l1s_com.limiter_task.parameters.thr_low_slope = ((T_MMI_LIMITER_REQ *)(msg->SigP))->thr_low_slope; l1a_l1s_com.limiter_task.parameters.thr_high_0 = ((T_MMI_LIMITER_REQ *)(msg->SigP))->thr_high_0; l1a_l1s_com.limiter_task.parameters.thr_high_slope = ((T_MMI_LIMITER_REQ *)(msg->SigP))->thr_high_slope; l1a_l1s_com.limiter_task.parameters.gain_fall = ((T_MMI_LIMITER_REQ *)(msg->SigP))->gain_fall; l1a_l1s_com.limiter_task.parameters.gain_rise = ((T_MMI_LIMITER_REQ *)(msg->SigP))->gain_rise; // Enable the L1S task l1a_l1s_com.limiter_task.command.update = TRUE; *state = WAIT_CON; } // End process return; } // omaps00090550 break; case WAIT_CON: { if (SignalCode == L1_LIMITER_CON) { // Send the start confirmation message l1a_audio_send_confirmation(MMI_LIMITER_CON); *state = RESET; } // End process return; } // omaps00090550 break; } // switch } // while(1) } #endif // L1_LIMITER #if (L1_ES == 1) /*-------------------------------------------------------*/ /* l1a_mmi_es_process() */ /*-------------------------------------------------------*/ /* */ /* Description: */ /* ------------ */ /* This function is a state machine which handles the */ /* Echo Suppressor feature. */ /* */ /* Starting messages: MMI_ES_REQ */ /* */ /* Result messages (input): L1_ES_CON */ /* */ /* Result messages (output): MMI_ES_CON */ /* */ /* Reset messages (input): none */ /* */ /* Stop message (input): none */ /* */ /* Stop message (output): none */ /* */ /*-------------------------------------------------------*/ #if (L1_DYN_DSP_DWNLD == 1) void l1a_mmi_es_process(xSignalHeaderRec *msg) { enum states { RESET = 0, WAIT_REQ = 1, WAIT_DYN_DWNLD = 2, WAIT_CON = 3 }; UWORD8 *state = &l1a.state[L1A_ES_STATE]; UWORD32 SignalCode = msg->SignalCode; while(1) { switch(*state) { case RESET: { // Reset the command l1a_l1s_com.es_task.command.update = FALSE; *state = WAIT_REQ; } break; case WAIT_REQ: { if (SignalCode == MMI_ES_REQ) { // Load the message into the l1a_l1s_com memory l1a_l1s_com.es_task.parameters.es_enable = ((T_MMI_ES_REQ *)(msg->SigP))->es_enable; l1a_l1s_com.es_task.parameters.es_behavior = ((T_MMI_ES_REQ *)(msg->SigP))->es_behavior; if (l1a_l1s_com.es_task.parameters.es_behavior == ES_CUSTOM_PARAM) { // Load every parameters from the message l1a_l1s_com.es_task.parameters.es_config.es_mode = ((T_MMI_ES_REQ *)(msg->SigP))->es_mode; l1a_l1s_com.es_task.parameters.es_config.es_gain_dl = ((T_MMI_ES_REQ *)(msg->SigP))->es_gain_dl; l1a_l1s_com.es_task.parameters.es_config.es_gain_ul_1 = ((T_MMI_ES_REQ *)(msg->SigP))->es_gain_ul_1; l1a_l1s_com.es_task.parameters.es_config.es_gain_ul_2 = ((T_MMI_ES_REQ *)(msg->SigP))->es_gain_ul_2; l1a_l1s_com.es_task.parameters.es_config.tcl_fe_ls_thr = ((T_MMI_ES_REQ *)(msg->SigP))->tcl_fe_ls_thr; l1a_l1s_com.es_task.parameters.es_config.tcl_dt_ls_thr = ((T_MMI_ES_REQ *)(msg->SigP))->tcl_dt_ls_thr; l1a_l1s_com.es_task.parameters.es_config.tcl_fe_ns_thr = ((T_MMI_ES_REQ *)(msg->SigP))->tcl_fe_ns_thr; l1a_l1s_com.es_task.parameters.es_config.tcl_dt_ns_thr = ((T_MMI_ES_REQ *)(msg->SigP))->tcl_dt_ns_thr; l1a_l1s_com.es_task.parameters.es_config.tcl_ne_thr = ((T_MMI_ES_REQ *)(msg->SigP))->tcl_ne_thr; l1a_l1s_com.es_task.parameters.es_config.ref_ls_pwr = ((T_MMI_ES_REQ *)(msg->SigP))->ref_ls_pwr; l1a_l1s_com.es_task.parameters.es_config.switching_time = ((T_MMI_ES_REQ *)(msg->SigP))->switching_time; l1a_l1s_com.es_task.parameters.es_config.switching_time_dt = ((T_MMI_ES_REQ *)(msg->SigP))->switching_time_dt; l1a_l1s_com.es_task.parameters.es_config.hang_time = ((T_MMI_ES_REQ *)(msg->SigP))->hang_time; l1a_l1s_com.es_task.parameters.es_config.gain_lin_dl_vect[0] = ((T_MMI_ES_REQ *)(msg->SigP))->gain_lin_dl_vect[0]; l1a_l1s_com.es_task.parameters.es_config.gain_lin_dl_vect[1] = ((T_MMI_ES_REQ *)(msg->SigP))->gain_lin_dl_vect[1]; l1a_l1s_com.es_task.parameters.es_config.gain_lin_dl_vect[2] = ((T_MMI_ES_REQ *)(msg->SigP))->gain_lin_dl_vect[2]; l1a_l1s_com.es_task.parameters.es_config.gain_lin_dl_vect[3] = ((T_MMI_ES_REQ *)(msg->SigP))->gain_lin_dl_vect[3]; l1a_l1s_com.es_task.parameters.es_config.gain_lin_ul_vect[0] = ((T_MMI_ES_REQ *)(msg->SigP))->gain_lin_ul_vect[0]; l1a_l1s_com.es_task.parameters.es_config.gain_lin_ul_vect[1] = ((T_MMI_ES_REQ *)(msg->SigP))->gain_lin_ul_vect[1]; l1a_l1s_com.es_task.parameters.es_config.gain_lin_ul_vect[2] = ((T_MMI_ES_REQ *)(msg->SigP))->gain_lin_ul_vect[2]; l1a_l1s_com.es_task.parameters.es_config.gain_lin_ul_vect[3] = ((T_MMI_ES_REQ *)(msg->SigP))->gain_lin_ul_vect[3]; } if (l1a.dyn_dwnld.semaphore_vect[ANR_STATE_MACHINE] == GREEN) { // WARNING: The following code must be copied in the state WAIT_DYN_DWNLD // when ES task is activated at L1s level // Enable the L1S task l1a_l1s_com.es_task.command.update = TRUE; *state = WAIT_CON; } else { *state = WAIT_DYN_DWNLD; #if ((TRACE_TYPE == 1) || (TRACE_TYPE == 4) || (TRACE_TYPE == 5)) if((trace_info.current_config->l1_dyn_trace) & (1<<L1_DYN_TRACE_DYN_DWNLD)) { char str[30]; sprintf(str,"ES SM blocked by DYN DWNLD\r\n"); #if(CODE_VERSION == SIMULATION) trace_fct_simu_dyn_dwnld(str); #else rvt_send_trace_cpy((T_RVT_BUFFER)str,trace_info.l1_trace_user_id,strlen(str),RVT_ASCII_FORMAT); #endif } #endif // (TRACE_TYPE == 1) || (TRACE_TYPE == 4) } } // End process return; } // omaps00090550 break; case WAIT_DYN_DWNLD: { if (SignalCode == API_L1_DYN_DWNLD_FINISHED && l1a.dyn_dwnld.semaphore_vect[ANR_STATE_MACHINE] == GREEN) { // Enable the L1S task l1a_l1s_com.es_task.command.update = TRUE; *state = WAIT_CON; #if ((TRACE_TYPE == 1) || (TRACE_TYPE == 4) || (TRACE_TYPE == 5)) if((trace_info.current_config->l1_dyn_trace) & (1<<L1_DYN_TRACE_DYN_DWNLD)) { char str[30]; sprintf(str,"ES SM un-blocked\r\n"); #if(CODE_VERSION == SIMULATION) trace_fct_simu_dyn_dwnld(str); #else rvt_send_trace_cpy((T_RVT_BUFFER)str,trace_info.l1_trace_user_id,strlen(str),RVT_ASCII_FORMAT); #endif } #endif // (TRACE_TYPE == 1) || (TRACE_TYPE == 4) } return; } // omaps00090550 break; case WAIT_CON: { if (SignalCode == L1_ES_CON) { // Send the start confirmation message l1a_audio_send_confirmation(MMI_ES_CON); *state = RESET; } // End process return; } // omaps00090550 break; } // switch } // while(1) } #else void l1a_mmi_es_process(xSignalHeaderRec *msg) { enum states { RESET = 0, WAIT_REQ = 1, WAIT_CON = 2 }; UWORD8 *state = &l1a.state[L1A_ES_STATE]; UWORD32 SignalCode = msg->SignalCode; while(1) { switch(*state) { case RESET: { // Reset the command l1a_l1s_com.es_task.command.update = FALSE; *state = WAIT_REQ; } break; case WAIT_REQ: { if (SignalCode == MMI_ES_REQ) { // Load the message into the l1a_l1s_com memory l1a_l1s_com.es_task.parameters.es_enable = ((T_MMI_ES_REQ *)(msg->SigP))->es_enable; l1a_l1s_com.es_task.parameters.es_behavior = ((T_MMI_ES_REQ *)(msg->SigP))->es_behavior; if (l1a_l1s_com.es_task.parameters.es_behavior == ES_CUSTOM_PARAM) { // Load every parameters from the message l1a_l1s_com.es_task.parameters.es_config.es_mode = ((T_MMI_ES_REQ *)(msg->SigP))->es_mode; l1a_l1s_com.es_task.parameters.es_config.es_gain_dl = ((T_MMI_ES_REQ *)(msg->SigP))->es_gain_dl; l1a_l1s_com.es_task.parameters.es_config.es_gain_ul_1 = ((T_MMI_ES_REQ *)(msg->SigP))->es_gain_ul_1; l1a_l1s_com.es_task.parameters.es_config.es_gain_ul_2 = ((T_MMI_ES_REQ *)(msg->SigP))->es_gain_ul_2; l1a_l1s_com.es_task.parameters.es_config.tcl_fe_ls_thr = ((T_MMI_ES_REQ *)(msg->SigP))->tcl_fe_ls_thr; l1a_l1s_com.es_task.parameters.es_config.tcl_dt_ls_thr = ((T_MMI_ES_REQ *)(msg->SigP))->tcl_dt_ls_thr; l1a_l1s_com.es_task.parameters.es_config.tcl_fe_ns_thr = ((T_MMI_ES_REQ *)(msg->SigP))->tcl_fe_ns_thr; l1a_l1s_com.es_task.parameters.es_config.tcl_dt_ns_thr = ((T_MMI_ES_REQ *)(msg->SigP))->tcl_dt_ns_thr; l1a_l1s_com.es_task.parameters.es_config.tcl_ne_thr = ((T_MMI_ES_REQ *)(msg->SigP))->tcl_ne_thr; l1a_l1s_com.es_task.parameters.es_config.ref_ls_pwr = ((T_MMI_ES_REQ *)(msg->SigP))->ref_ls_pwr; l1a_l1s_com.es_task.parameters.es_config.switching_time = ((T_MMI_ES_REQ *)(msg->SigP))->switching_time; l1a_l1s_com.es_task.parameters.es_config.switching_time_dt = ((T_MMI_ES_REQ *)(msg->SigP))->switching_time_dt; l1a_l1s_com.es_task.parameters.es_config.hang_time = ((T_MMI_ES_REQ *)(msg->SigP))->hang_time; l1a_l1s_com.es_task.parameters.es_config.gain_lin_dl_vect[0] = ((T_MMI_ES_REQ *)(msg->SigP))->gain_lin_dl_vect[0]; l1a_l1s_com.es_task.parameters.es_config.gain_lin_dl_vect[1] = ((T_MMI_ES_REQ *)(msg->SigP))->gain_lin_dl_vect[1]; l1a_l1s_com.es_task.parameters.es_config.gain_lin_dl_vect[2] = ((T_MMI_ES_REQ *)(msg->SigP))->gain_lin_dl_vect[2]; l1a_l1s_com.es_task.parameters.es_config.gain_lin_dl_vect[3] = ((T_MMI_ES_REQ *)(msg->SigP))->gain_lin_dl_vect[3]; l1a_l1s_com.es_task.parameters.es_config.gain_lin_ul_vect[0] = ((T_MMI_ES_REQ *)(msg->SigP))->gain_lin_ul_vect[0]; l1a_l1s_com.es_task.parameters.es_config.gain_lin_ul_vect[1] = ((T_MMI_ES_REQ *)(msg->SigP))->gain_lin_ul_vect[1]; l1a_l1s_com.es_task.parameters.es_config.gain_lin_ul_vect[2] = ((T_MMI_ES_REQ *)(msg->SigP))->gain_lin_ul_vect[2]; l1a_l1s_com.es_task.parameters.es_config.gain_lin_ul_vect[3] = ((T_MMI_ES_REQ *)(msg->SigP))->gain_lin_ul_vect[3]; } // Enable the L1S task l1a_l1s_com.es_task.command.update = TRUE; *state = WAIT_CON; } // End process return; } break; case WAIT_CON: { if (SignalCode == L1_ES_CON) { // Send the start confirmation message l1a_audio_send_confirmation(MMI_ES_CON); *state = RESET; } // End process return; } break; } // switch } // while(1) } #endif //L1_DYN_DSP_DWNLD #endif // L1_ES // New Vocoder IF process #if (L1_VOCODER_IF_CHANGE == 1) void l1a_mmi_vocoder_cfg_process (xSignalHeaderRec *msg) { BOOL msg_parameter; enum states { WAIT_REQ = 0, WAIT_ENABLE_CON = 1, WAIT_DISABLE_CON = 2 }; enum vocoder_cfg_req { VOCODER_DISABLE_REQ = 0, VOCODER_ENABLE_REQ = 1 }; UWORD8 *state = &l1a.state[L1A_VOCODER_CFG_STATE]; UWORD32 SignalCode = msg->SignalCode; while (1) { switch(*state) { case WAIT_REQ: { // Waiting PS messages.... // If SignalCode is an MPHC_STOP_DEDICATED_REQ and vocoders are enabled, they must be stopped automatically #if(L1_CHECK_COMPATIBLE == 1) if (((SignalCode == MPHC_STOP_DEDICATED_REQ) && (l1a.vocoder_state.enabled == TRUE)) || (l1a.vch_auto_disable == TRUE)) #else if (((SignalCode == MPHC_STOP_DEDICATED_REQ) && (l1a.vocoder_state.enabled == TRUE))) #endif { // Command vocoder disabling at L1A-L1s interface and set the automatic disable flag to TRUE l1a_l1s_com.dedic_set.start_vocoder = TCH_VOCODER_DISABLE_COMMAND; l1a.vocoder_state.automatic_disable = TRUE; *state = WAIT_DISABLE_CON; #if(L1_CHECK_COMPATIBLE == 1) l1a.vch_auto_disable = FALSE; #endif } else if (SignalCode == MMI_TCH_VOCODER_CFG_REQ) { // In case the vocoder START or STOP is commanded by PS msg_parameter = ((T_MMI_TCH_VOCODER_CFG_REQ *) (msg->SigP))->vocoder_state; // If it is an explicit STOP.... if (msg_parameter == VOCODER_DISABLE_REQ) { #if (AUDIO_DEBUG == 1) trace_info.audio_debug_var.vocoder_enable_status = 0; #endif //... explicitely disable vocoders if they're enabled commanidng the stop at L1A-L1s interface if (l1a.vocoder_state.enabled == TRUE) { l1a_l1s_com.dedic_set.start_vocoder = TCH_VOCODER_DISABLE_COMMAND; l1a.vocoder_state.automatic_disable = FALSE; *state = WAIT_DISABLE_CON; } else { // ...else, if vocoders are already disabled but PS is sending erroneously the request // send him however the confirmation without doing anything (protection check). // In case L1 standalone or SIMULATION, confirmation message must be // sent to MMI mailbox, else with complete PS software the message must be // addressed to the ACI queue (WARNING: ACI_QUEUE must be properly defined). l1a_send_confirmation(MMI_TCH_VOCODER_CFG_CON, ACI_QUEUE); } } else if (msg_parameter == VOCODER_ENABLE_REQ) { #if (AUDIO_DEBUG == 1) trace_info.audio_debug_var.vocoder_enable_status = 1; #endif // If it is a START if (l1a.vocoder_state.enabled == FALSE) { // Command the start at L1A-L1s interface if vocoders are disabled l1a_l1s_com.dedic_set.start_vocoder = TCH_VOCODER_ENABLE_COMMAND; *state = WAIT_ENABLE_CON; } else { // ...else, if vocoders are already enabled but PS is sending erroneously the request // send him however the confirmation without doing anything (protection check). // In case L1 standalone or SIMULATION, confirmation message must be // sent to MMI mailbox, else with complete PS software the message must be // addressed to the ACI queue (WARNING: ACI_QUEUE must be properly defined). l1a_send_confirmation(MMI_TCH_VOCODER_CFG_CON, ACI_QUEUE); } } } return; } // omaps00090550 break; case WAIT_ENABLE_CON: { if (SignalCode == L1_VOCODER_CFG_ENABLE_CON) { // when L1s confirms the enabling, forward the confirmation to PS and set the vocoders enabled flag to TRUE l1a.vocoder_state.enabled = TRUE; // in case L1 standalone or SIMULATION, confirmation message must be // sent to MMI mailbox, else with complete PS software the message must be // addressed to the ACI queue (WARNING: ACI_QUEUE must be properly defined). l1a_send_confirmation(MMI_TCH_VOCODER_CFG_CON, ACI_QUEUE); *state = WAIT_REQ; } return; } // omaps00090550 break; case WAIT_DISABLE_CON: { if (SignalCode == L1_VOCODER_CFG_DISABLE_CON) { // when L1s confirms the disabling, forwards the confirmation to PS and set the vocoders enabled flag to FALSE l1a.vocoder_state.enabled = FALSE; *state = WAIT_REQ; if (l1a.vocoder_state.automatic_disable == FALSE) { // Only in case it is an explicit request to STOP the vocoders (made previously by PS) // send him the confirmation. // In case L1 standalone or SIMULATION, confirmation message must be // sent to MMI mailbox, else with complete PS software the message must be // addressed to the ACI queue (WARNING: ACI_QUEUE must be properly defined). l1a_send_confirmation(MMI_TCH_VOCODER_CFG_CON, ACI_QUEUE); } else // Reset automatic disable flag l1a.vocoder_state.automatic_disable = FALSE; } return; } // omaps00090550 break; } } } #endif // L1_VOCODER_IF_CHANGE == 1 #if 0 /* FreeCalypso: LoCosto-ism removed */ void l1a_mmi_outen_cfg_process (xSignalHeaderRec *msg) { #if (OP_RIV_AUDIO == 1) UWORD32 SignalCode = msg->SignalCode; void *p_message; T_RVF_MB_STATUS mb_status; if (SignalCode == MMI_OUTEN_CFG_REQ) { l1a_l1s_com.outen_cfg_task.outen1 = ((T_MMI_OUTEN_CFG_REQ *)(msg->SigP))->outen1; l1a_l1s_com.outen_cfg_task.outen2 = ((T_MMI_OUTEN_CFG_REQ *)(msg->SigP))->outen2; l1a_l1s_com.outen_cfg_task.outen3 = ((T_MMI_OUTEN_CFG_REQ *)(msg->SigP))->outen3; l1a_l1s_com.outen_cfg_task.classD = ((T_MMI_OUTEN_CFG_REQ *)(msg->SigP))->classD; l1a_l1s_com.outen_cfg_task.command_requested++; // Send the confirmation message l1a_audio_send_confirmation(MMI_OUTEN_CFG_CON); } else if(SignalCode == MMI_OUTEN_CFG_READ_REQ) { // Allocate the Riviera buffer mb_status = rvf_get_buf ( p_audio_gbl_var->mb_external, sizeof (T_MMI_OUTEN_CFG_READ_CON), (T_RVF_BUFFER **) (&p_message)); // If insufficient resources, then report a memory error and abort. if (mb_status == RVF_RED) { // the memory is insufficient to continue the non regression test AUDIO_SEND_TRACE("AUDIO entity has no memory for L1 confirm",RV_TRACE_LEVEL_ERROR); return; } // Fill the message ID ((T_MMI_OUTEN_CFG_READ_CON *)(p_message))->header.msg_id = MMI_OUTEN_CFG_READ_CON; // Fill the message parameter ((T_MMI_OUTEN_CFG_READ_CON*)(p_message))->outen1 = l1a_l1s_com.outen_cfg_task.outen1; ((T_MMI_OUTEN_CFG_READ_CON*)(p_message))->outen2 = l1a_l1s_com.outen_cfg_task.outen2; ((T_MMI_OUTEN_CFG_READ_CON*)(p_message))->outen3 = l1a_l1s_com.outen_cfg_task.outen3; ((T_MMI_OUTEN_CFG_READ_CON*)(p_message))->classD = l1a_l1s_com.outen_cfg_task.classD; // send the messsage to the audio entity rvf_send_msg (p_audio_gbl_var->addrId,p_message); } #endif /*OP_RIV_AUDIO*/ } /* end function l1a_mmi_outen_cfg_process */ #endif #if(L1_BT_AUDIO ==1) void l1a_mmi_bt_process(xSignalHeaderRec *msg) { UWORD32 SignalCode = msg->SignalCode; if (SignalCode == MMI_BT_ENABLE_REQ) bt_audio.connected_status = TRUE; else if(SignalCode == MMI_BT_DISABLE_REQ) bt_audio.connected_status = FALSE; } #endif #endif // AUDIO_TASK