view src/cs/layer1/p_include/l1p_vare.h @ 303:f76436d19a7a default tip

!GPRS config: fix long-standing AT+COPS chance hanging bug There has been a long-standing bug in FreeCalypso going back years: sometimes in the AT command bring-up sequence of an ACI-only MS, the AT+COPS command would produce only a power scan followed by cessation of protocol stack activity (only L1 ADC traces), instead of the expected network search sequence. This behaviour was seen in different FC firmware versions going back to Citrine, and seemed to follow some law of chance, not reliably repeatable. This bug has been tracked down and found to be specific to !GPRS configuration, stemming from our TCS2/TCS3 hybrid and reconstruction of !GPRS support that was bitrotten in TCS3.2/LoCosto version. ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3 version and had to be pulled from TCS2 - but as it turns out, there is a new field in the MMR_REG_REQ primitive that needs to be set correctly, and that psa_mms.c module is the place where this initialization needed to be added.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 08 Jun 2023 08:23:37 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/************* Revision Controle System Header *************
 *                  GSM Layer 1 software 
 * L1P_VAREX.H
 *
 *        Filename l1p_vare.h
 *  Copyright 2003 (C) Texas Instruments  
 *
 ************* Revision Controle System Header *************/

#ifdef L1P_ASYN_C

#if (LONG_JUMP == 3)
  #ifdef __GNUC__
    #define SECTION_ATTR __attribute__ ((section (".l1s_global")))
  #else
    #define SECTION_ATTR
    #pragma DATA_SECTION(l1ps,".l1s_global")
    #pragma DATA_SECTION(l1pa_l1ps_com,".l1s_global")
    #pragma DATA_SECTION(l1ps_macs_com,".l1s_global")
    #pragma DATA_SECTION(l1ps_dsp_com,".l1s_global")
  #endif
#else
  #define SECTION_ATTR
#endif

  // Global Packet L1A structure
  T_L1PA_GLOBAL    l1pa;

  // Global Packet L1S structure
  T_L1PS_GLOBAL    l1ps SECTION_ATTR;

  // Common structure between L1A and L1S in packet mode
  T_L1PA_L1PS_COM  l1pa_l1ps_com SECTION_ATTR;
 
  // Communication between L1S and MAC-S in packet mode
  T_L1PS_MACS_COM  l1ps_macs_com SECTION_ATTR;

  // MCU / DSP interface
  T_L1PS_DSP_COM  l1ps_dsp_com SECTION_ATTR;

  #undef SECTION_ATTR

#else
  extern T_L1PA_GLOBAL    l1pa;
  extern T_L1PS_GLOBAL    l1ps;
  extern T_L1PA_L1PS_COM  l1pa_l1ps_com;
  extern T_L1PS_DSP_COM   l1ps_dsp_com;
  extern T_L1PS_MACS_COM  l1ps_macs_com;

#endif