FreeCalypso > hg > fc-tourmaline

view src/cs/layer1/tpu_drivers/source/makefile_p_pc @ 303:f76436d19a7a default tip

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
!GPRS config: fix long-standing AT+COPS chance hanging bug There has been a long-standing bug in FreeCalypso going back years: sometimes in the AT command bring-up sequence of an ACI-only MS, the AT+COPS command would produce only a power scan followed by cessation of protocol stack activity (only L1 ADC traces), instead of the expected network search sequence. This behaviour was seen in different FC firmware versions going back to Citrine, and seemed to follow some law of chance, not reliably repeatable. This bug has been tracked down and found to be specific to !GPRS configuration, stemming from our TCS2/TCS3 hybrid and reconstruction of !GPRS support that was bitrotten in TCS3.2/LoCosto version. ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3 version and had to be pulled from TCS2 - but as it turns out, there is a new field in the MMR_REG_REQ primitive that needs to be set correctly, and that psa_mms.c module is the place where this initialization needed to be added.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 08 Jun 2023 08:23:37 +0000
parents 4e78acac3d88
children
line wrap: on
line source

#    Filename makefile_p_pc                  
#    Version  1.8                  
#    Date     09/18/02                  
#        
#       Makefile for GSM TPU drivers - PC version
#
#       Copyright (c) Texas Instruments 1996
#      
#
.SUFFIXES: .obj $(SUFFIXES)


# Grab customer and rf id's
#--------------------------
CUST=$(cust)
RF=$(rf)
CHIPSET=$(bsb)
ANALOG=$(anl)
DSP=$(dsp)
BOARD=$(board)
LONG_JUMP=$(ljump)
TESTMODE=$(testmode)

# Directories for PC system
#----------------------------
ARMTOOLS =u:/470tools
PTOOL_DIR =u:/ptool/tools
INTRAM_DIR = u:/tools/INTRAM/TOOLS

CL470_0 = $(ARMTOOLS)/cl470
CL470_1 = $(PTOOL_DIR)/pcl470
CL470_2 = $(PTOOL_DIR)/vcl470
CL470_3 = $(INTRAM_DIR)/icl470 $(PTOOL_DIR)/vcl470

CL470 = $(CL470_$(LONG_JUMP))
AR470   =$(ARMTOOLS)/ar470
ASM470  =$(ARMTOOLS)/asm470

# Source code path
#-----------------
SOURCE=../source$(CUST)
PSOURCE=../p_source$(CUST)

# Include file source paths
#--------------------------
INCLUDE = \
	-I../../nucleus/include \
	-I../../include \
	-I../../drivers1/common \
	-I../source$(CUST) \
	-I../../cust$(CUST) \
	-I../../tm_include \
	-I../p_source$(CUST) \
  -I../../audio_include \
  -I../../audio_cust$(CUST) \
  -I../../hint

 
DEPEND = $(SOURCE)/tpudrv$(RF).h \
	../../include/l1_time.h \
	../../drivers1/common/iq.h \
	../../cust$(CUST)/l1_rf$(RF).h \
	tpudrv.h


# Object files path
#------------------
OBJ=$(SOURCE)/obj
OBJS=obj_$(CHIPSET)_$(ANALOG)

# EXECUTION TARGET
#-----------------
all:	../lib/tpudrv_$(CUST)_$(RF)_$(CHIPSET)_$(ANALOG)_$(DSP)_$(BOARD)_$(LONG_JUMP)_$(TESTMODE).lib 

clean:
	-rm obj/tpudrv.obj_$(ANALOG) $(OBJ)/tpudrv$(RF).obj_$(ANALOG)_$(BOARD) 
	-rm ../lib/tpudrv_$(CUST)_$(RF)_$(ANALOG)_$(BOARD)_$(LONG_JUMP).lib

# How to...
#----------

#...generate the library
#-----------------------
../lib/tpudrv_$(CUST)_$(RF)_$(CHIPSET)_$(ANALOG)_$(DSP)_$(BOARD)_$(LONG_JUMP)_$(TESTMODE).lib: obj/tpudrv.obj_$(CHIPSET)_$(ANALOG) $(OBJ)/tpudrv$(RF).obj $(OBJ)/p_tpudr$(RF).obj
	$(AR470) r $@ obj/tpudrv.obj_$(CHIPSET)_$(ANALOG) $(OBJ)/tpudrv$(RF).obj $(OBJ)/p_tpudr$(RF).obj

#...generate the common object file
#----------------------------------
obj/tpudrv.obj_$(CHIPSET)_$(ANALOG): $(DEPEND) tpudrv.c
	$(CL470) $(INCLUDE) -i$(ARMTOOLS)  -dCHIPSET=$(bsb) -dANALOG=$(anl) -dDSP=$(dsp) -dLONG_JUMP=$(LONG_JUMP) -dTESTMODE=$(TESTMODE) -c -g -me -mt -mw -o2 -pw2 -fr obj -eo$(OBJS) tpudrv.c


#...generate the target dependant object file
#--------------------------------------------
$(OBJ)/tpudrv$(RF).obj: $(DEPEND) $(SOURCE)/tpudrv$(RF).c 
	$(CL470) $(INCLUDE) -i$(ARMTOOLS)  -dCHIPSET=$(bsb) -dANALOG=$(anl) -dDSP=$(dsp) -dBOARD=$(BOARD) -dLONG_JUMP=$(LONG_JUMP) -dTESTMODE=$(TESTMODE) -c -g -me -mt -mw -o2 -pw2 -fr$(OBJ) $(SOURCE)/tpudrv$(RF).c 

#...generate the target dependant GPRS object file
#-------------------------------------------------
$(OBJ)/p_tpudr$(RF).obj: $(DEPEND) $(PSOURCE)/p_tpudr$(RF).c 
	$(CL470) $(INCLUDE) -i$(ARMTOOLS) -dCHIPSET=$(bsb) -dANALOG=$(anl) -dDSP=$(dsp) -dBOARD=$(BOARD) -dLONG_JUMP=$(LONG_JUMP) -c -g -me -mt -mw -o2 -pw2 -fr$(OBJ) $(PSOURCE)/p_tpudr$(RF).c