view src/cs/services/audio/audio_mode.c @ 303:f76436d19a7a default tip

!GPRS config: fix long-standing AT+COPS chance hanging bug There has been a long-standing bug in FreeCalypso going back years: sometimes in the AT command bring-up sequence of an ACI-only MS, the AT+COPS command would produce only a power scan followed by cessation of protocol stack activity (only L1 ADC traces), instead of the expected network search sequence. This behaviour was seen in different FC firmware versions going back to Citrine, and seemed to follow some law of chance, not reliably repeatable. This bug has been tracked down and found to be specific to !GPRS configuration, stemming from our TCS2/TCS3 hybrid and reconstruction of !GPRS support that was bitrotten in TCS3.2/LoCosto version. ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3 version and had to be pulled from TCS2 - but as it turns out, there is a new field in the MMR_REG_REQ primitive that needs to be set correctly, and that psa_mms.c module is the place where this initialization needed to be added.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 08 Jun 2023 08:23:37 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/****************************************************************************/
/*                                                                          */
/*  File Name:  audio_mode.c                                                */
/*                                                                          */
/*  Purpose:  This file contains all the functions used for audio mode misc */
/*            services.                                                     */
/*                                                                          */
/*  Version   0.1                                                           */
/*                                                                          */
/*  Date        Modification                                                */
/*  ------------------------------------------------------------------------*/
/*  14 Jan 2002  Create                                                     */
/*                                                                          */
/*  Author      Francois Mazard                                             */
/*                                                                          */
/* (C) Copyright 2001 by Texas Instruments Incorporated, All Rights Reserved*/
/****************************************************************************/

#include "rv/rv_defined_swe.h"

#ifdef RVM_AUDIO_MAIN_SWE
  #ifndef _WINDOWS
    #include "config/swconfig.cfg"
    #include "config/sys.cfg"
    #include "config/chipset.cfg"
  #endif

  #include "l1_confg.h"
  #include "rv/rv_general.h"
  #include "rvm/rvm_gen.h"
  #include "audio/audio_ffs_i.h"
  #include "audio/audio_api.h"
  #include "audio/audio_structs_i.h"
  #include "audio/audio_error_hdlr_i.h"
  #include "audio/audio_var_i.h"
  #include "audio/audio_messages_i.h"
  #include "audio/audio_macro_i.h"
  #include "rvf/rvf_target.h"
  #include "audio/audio_const_i.h"

  /* include the usefull L1 header */
  #ifdef _WINDOWS
    #define BOOL_FLAG
    //#define CHAR_FLAG
  #endif
  #include "l1_types.h"
  #include "l1audio_const.h"
  #include "l1audio_cust.h"
  #include "l1audio_defty.h"
  #include "l1audio_msgty.h"
  #include "l1audio_signa.h"
  #if TESTMODE
   #include "l1tm_defty.h"
  #endif
  #if (L1_GTT == 1)
    #include "l1gtt_const.h"
    #include "l1gtt_defty.h"
  #endif
  #include "l1_const.h"
  #include "l1_defty.h"
  #include "l1_msgty.h"
  #include "l1_signa.h"
  #ifdef _WINDOWS
    #define L1_ASYNC_C
  #endif
  #include "l1_varex.h"

  /* external functions */
  extern void audio_mode_full_access_write_send_status (T_AUDIO_RET status, T_RV_RETURN return_path);
  extern void audio_mode_load_send_status              (T_AUDIO_RET status, T_RV_RETURN return_path);
  extern void audio_mode_save_send_status              (T_AUDIO_RET status, T_RV_RETURN return_path);
  extern void audio_mode_speaker_volume_send_status    (T_AUDIO_RET status, T_RV_RETURN return_path);

  /********************************************************************************/
  /*                                                                              */
  /*    Function Name:   audio_mode_message_switch                                */
  /*                                                                              */
  /*    Purpose:  This function manages the dispatching of the message usefull    */
  /*              for audio mode services.                                        */
  /*                                                                              */
  /*    Input Parameters:                                                         */
  /*        Audio message.                                                        */
  /*                                                                              */
  /*    Output Parameters:                                                        */
  /*        ID of the message receptor.                                           */
  /*                                                                              */
  /*    Note:                                                                     */
  /*        None.                                                                 */
  /*                                                                              */
  /*    Revision History:                                                         */
  /*        None.                                                                 */
  /*                                                                              */
  /********************************************************************************/
  UINT8 audio_mode_message_switch(T_RV_HDR *p_message)
  {
    switch(p_message->msg_id)
    {
      case AUDIO_MODE_LOAD_REQ :
      {
        if ( (p_audio_gbl_var->audio_mode_var.audio_mode_load_var.state != AUDIO_MODE_LOAD_IDLE) ||
             (p_audio_gbl_var->audio_mode_var.full_access_write_var.state != AUDIO_MODE_FULL_WRITE_IDLE) )
        {
          AUDIO_SEND_TRACE("AUDIO MODE LOAD: an entity already uses this service", RV_TRACE_LEVEL_ERROR);
          audio_mode_load_send_status (AUDIO_ERROR, ((T_AUDIO_MODE_LOAD_REQ *)p_message)->return_path);
          p_audio_gbl_var->message_processed = TRUE;
          return (AUDIO_MODE_NONE);
        }
        return(AUDIO_MODE_LOAD);
        break;
      }
      case AUDIO_MODE_SAVE_REQ :
      {
        if ( (p_audio_gbl_var->audio_mode_var.audio_mode_load_var.state != AUDIO_MODE_LOAD_IDLE) ||
             (p_audio_gbl_var->audio_mode_var.full_access_write_var.state != AUDIO_MODE_FULL_WRITE_IDLE) )
        {
          AUDIO_SEND_TRACE("AUDIO MODE SAVE: an entity currently changes the audio mode", RV_TRACE_LEVEL_ERROR);
          audio_mode_save_send_status (AUDIO_ERROR, ((T_AUDIO_MODE_SAVE_REQ *)p_message)->return_path);
          p_audio_gbl_var->message_processed = TRUE;
          return (AUDIO_MODE_NONE);
        }
        return(AUDIO_MODE_SAVE);
        break;
      }
      case AUDIO_MODE_WRITE_REQ :
      {
        if ( (p_audio_gbl_var->audio_mode_var.audio_mode_load_var.state != AUDIO_MODE_LOAD_IDLE) ||
             (p_audio_gbl_var->audio_mode_var.full_access_write_var.state != AUDIO_MODE_FULL_WRITE_IDLE) )
        {
          AUDIO_SEND_TRACE("AUDIO MODE FULL ACCESS WRITE: an entity currently changes the audio mode", RV_TRACE_LEVEL_ERROR);
          audio_mode_full_access_write_send_status (AUDIO_ERROR,
            ((T_AUDIO_MODE_FULL_ACCESS_WRITE_REQ *)p_message)->return_path);
          p_audio_gbl_var->message_processed = TRUE;
          return (AUDIO_MODE_NONE);
        }
        return(AUDIO_FULL_ACCESS_WRITE);
        break;
      }
      case OML1_START_DAI_TEST_CON :
      case OML1_STOP_DAI_TEST_CON :
      #if (AUDIO_MODE)
        case MMI_AUDIO_MODE_CON :
      #endif
      #if (FIR)
        case MMI_AUDIO_FIR_CON :
      #endif
      case MMI_AEC_CON :
      {
        if (p_audio_gbl_var->audio_mode_var.audio_mode_load_var.state != AUDIO_MODE_LOAD_IDLE)
        {
          return(AUDIO_MODE_LOAD);
        }
        else
        if (p_audio_gbl_var->audio_mode_var.full_access_write_var.state != AUDIO_MODE_FULL_WRITE_IDLE)
        {
          return(AUDIO_FULL_ACCESS_WRITE);
        }
        break;
      }
      case AUDIO_SPEAKER_VOLUME_REQ:
      {
        if ( (p_audio_gbl_var->audio_mode_var.audio_mode_load_var.state != AUDIO_MODE_LOAD_IDLE) ||
             (p_audio_gbl_var->audio_mode_var.full_access_write_var.state != AUDIO_MODE_FULL_WRITE_IDLE) )
        {
          AUDIO_SEND_TRACE("AUDIO MODE SPEAKER VOLUME: an entity currently changes the audio mode", RV_TRACE_LEVEL_ERROR);
          audio_mode_speaker_volume_send_status (AUDIO_ERROR,
            ((T_AUDIO_SPEAKER_VOLUME_REQ *)p_message)->return_path);
          p_audio_gbl_var->message_processed = TRUE;
          return (AUDIO_MODE_NONE);
        }
        return(AUDIO_SPEAKER_VOLUME);
        break;
      }
    }
    return (AUDIO_MODE_NONE);
  }
#endif /*RVM_AUDIO_MAIN_SWE*/