view src/cs/services/audio/audio_vm_amr.c @ 303:f76436d19a7a default tip

!GPRS config: fix long-standing AT+COPS chance hanging bug There has been a long-standing bug in FreeCalypso going back years: sometimes in the AT command bring-up sequence of an ACI-only MS, the AT+COPS command would produce only a power scan followed by cessation of protocol stack activity (only L1 ADC traces), instead of the expected network search sequence. This behaviour was seen in different FC firmware versions going back to Citrine, and seemed to follow some law of chance, not reliably repeatable. This bug has been tracked down and found to be specific to !GPRS configuration, stemming from our TCS2/TCS3 hybrid and reconstruction of !GPRS support that was bitrotten in TCS3.2/LoCosto version. ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3 version and had to be pulled from TCS2 - but as it turns out, there is a new field in the MMR_REG_REQ primitive that needs to be set correctly, and that psa_mms.c module is the place where this initialization needed to be added.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 08 Jun 2023 08:23:37 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/****************************************************************************/
/*                                                                          */
/*  File Name:  audio_vm_amr.c		                                        */
/*                                                                          */
/*  Purpose:  This file contains all the functions used to manage the       */
/*            Voice Memorization AMR.                                       */
/*                                                                          */
/*  Version   0.1                                                           */
/*                                                                          */
/*  Date        Modification                                                */
/*  ------------------------------------                                    */
/*  2 November 2002 Create                                                  */
/*                                                                          */
/*  Author                                                                  */
/*     Frederic Turgis                                                      */
/*                                                                          */
/* (C) Copyright 2002 by Texas Instruments Incorporated, All Rights Reserved*/
/****************************************************************************/

#include "rv/rv_defined_swe.h"
#ifdef RVM_AUDIO_MAIN_SWE
#ifndef _WINDOWS
    #include "config/swconfig.cfg"
    #include "config/sys.cfg"
    #include "config/chipset.cfg"
  #endif

  /* include the usefull L1 header */
  #include "l1_confg.h"

#if (L1_VOICE_MEMO_AMR)
  #include "rv/rv_general.h"
  #include "rvm/rvm_gen.h"
  #include "audio/audio_features_i.h"
  #include "audio/audio_ffs_i.h"
  #include "audio/audio_api.h"
  #include "audio/audio_structs_i.h"
  #include "audio/audio_var_i.h"
  #include "audio/audio_messages_i.h"
  #include "rvf/rvf_target.h"
  #include "audio/audio_const_i.h"
  #include "audio/audio_error_hdlr_i.h"

  /* include the usefull L1 header */
  #define BOOL_FLAG
  #define CHAR_FLAG
  #include "l1_types.h"
  #include "l1audio_cust.h"
  #include "l1audio_msgty.h"
  #include "l1audio_signa.h"

  /********************************************************************************/
  /*                                                                              */
  /*    Function Name:   audio_voice_memo_amr_message_switch	                  */
  /*                                                                              */
  /*    Purpose:  Manage the message supply between the voice memo play and the   */
  /*              voice memo record AMR                                           */
  /*                                                                              */
  /*    Input Parameters:                                                         */
  /*        start or stop message from the voice memo features                    */
  /*                                                                              */
  /*    Output Parameters:                                                        */
  /*        index of the manager                                                  */
  /*                                                                              */
  /*    Note:                                                                     */
  /*        None.                                                                 */
  /*                                                                              */
  /*    Revision History:                                                         */
  /*        None.                                                                 */
  /*                                                                              */
  /********************************************************************************/
#if (AUDIO_MEM_MANAGER)
  UINT8 audio_voice_memo_amr_memory_message_switch (T_RV_HDR *p_message)
  {
    switch (p_message->msg_id)
    {
    #if(AUDIO_NEW_FFS_MANAGER)
      case AUDIO_VM_AMR_RECORD_TO_FFS_START_REQ:
      case AUDIO_VM_AMR_RECORD_TO_FFS_STOP_REQ:
      {
        return(AUDIO_VM_AMR_RECORD);
      }
      break;
    #endif
    #if(AUDIO_RAM_MANAGER)
      case AUDIO_VM_AMR_RECORD_TO_RAM_START_REQ:
      case AUDIO_VM_AMR_RECORD_TO_RAM_STOP_REQ:
      {
        return(AUDIO_VM_AMR_RECORD);
      }
      break;
    #endif
    #if (AUDIO_NEW_FFS_MANAGER)
      case AUDIO_VM_AMR_PLAY_FROM_FFS_START_REQ:
      case AUDIO_VM_AMR_PLAY_FROM_FFS_STOP_REQ:
      {
        return(AUDIO_VM_AMR_PLAY);
      }
      break;
    #endif
    #if (AUDIO_RAM_MANAGER)
      case AUDIO_VM_AMR_PLAY_FROM_RAM_START_REQ:
      case AUDIO_VM_AMR_PLAY_FROM_RAM_STOP_REQ:
      {
        return(AUDIO_VM_AMR_PLAY);
      }
      break;
    #endif
    #if (AUDIO_MEM_MANAGER)
      /* check channel_id is the one given by driver initialization*/
      case AUDIO_MEM_STATUS_MSG:
      {
        /* check VM AMR is active for the given channel_id */
        if ((p_audio_gbl_var->audio_vm_amr_record.state != AUDIO_IDLE) &&
            ( ((T_AUDIO_MEM_STATUS *)p_message)->channel_id == p_audio_gbl_var->audio_vm_amr_record.channel_id))
          return(AUDIO_VM_AMR_RECORD);

        if ((p_audio_gbl_var->audio_vm_amr_play.state != AUDIO_IDLE) &&
            ( ((T_AUDIO_MEM_STATUS *)p_message)->channel_id == p_audio_gbl_var->audio_vm_amr_play.channel_id))
          return(AUDIO_VM_AMR_PLAY);

        return(AUDIO_VM_AMR_NONE);
      }
      break;
    #endif
      /* driver init => check session_id is VM AMR */
      case AUDIO_DRIVER_INIT_STATUS_MSG:
      {
        UINT8 session_id = ((T_AUDIO_DRIVER_INIT_STATUS *)p_message)->session_id;

        /* session_id is VM AMR */
        if ( (session_id == AUDIO_VM_AMR_PLAY_SESSION_ID)&&
             (p_audio_gbl_var->audio_vm_amr_play.state != AUDIO_IDLE))
        {
          return (AUDIO_VM_AMR_PLAY);
        }

        if ( (session_id == AUDIO_VM_AMR_RECORD_SESSION_ID)&&
             (p_audio_gbl_var->audio_vm_amr_record.state != AUDIO_IDLE))
        {
          return (AUDIO_VM_AMR_RECORD);
        }

        return(AUDIO_VM_AMR_NONE);
      }
      break;

      default:
        return(AUDIO_VM_AMR_NONE);
      break;
    } /* switch */
  }
#endif // #if (AUDIO_MEM_MANAGER)

#endif /* L1_VOICE_MEMO_AMR */
#endif /* RVM_AUDIO_MAIN_SWE */