view src/g23m-fad/tcpip/rnet/rnet_rt/rnet_rt_api_bind.c @ 303:f76436d19a7a default tip

!GPRS config: fix long-standing AT+COPS chance hanging bug There has been a long-standing bug in FreeCalypso going back years: sometimes in the AT command bring-up sequence of an ACI-only MS, the AT+COPS command would produce only a power scan followed by cessation of protocol stack activity (only L1 ADC traces), instead of the expected network search sequence. This behaviour was seen in different FC firmware versions going back to Citrine, and seemed to follow some law of chance, not reliably repeatable. This bug has been tracked down and found to be specific to !GPRS configuration, stemming from our TCS2/TCS3 hybrid and reconstruction of !GPRS support that was bitrotten in TCS3.2/LoCosto version. ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3 version and had to be pulled from TCS2 - but as it turns out, there is a new field in the MMR_REG_REQ primitive that needs to be set correctly, and that psa_mms.c module is the place where this initialization needed to be added.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 08 Jun 2023 08:23:37 +0000
parents fa8dc04885d8
children
line wrap: on
line source

/**
 * @file    rnet_rt_api_bind.c
 *
 * RNET_RT API
 *
 * @author  Regis Feneon
 * @version 0.1
 */

/*
 * $Id: rnet_rt_api_bind.c,v 1.3 2002/10/30 15:23:34 rf Exp $
 * $Name: ti_20021030 $
 *
 * History:
 *
 *  Date        Author        Modification
 *  --------------------------------------------------
 *  3/22/2002   Regis Feneon  Create
 *
 * (C) Copyright 2002 by TI, All Rights Reserved
 *
 */

#include "rnet_cfg.h"
#ifdef RNET_CFG_REAL_TRANSPORT

#include "rnet_rt_i.h"
#include "rnet_rt_env.h"

/**
 * Binds the connection to a local IP address and port number.
 *
 * @param  desc  Connection identifier [IN].
 * @param  local_addr  Local IP address
 *          The IP address can be specified as RNET_IP_ADDR_ANY
 *          in order to bind the connection to all local IP addresses [IN].
 * @param  local_port  If the port is not specified, the allocation of a port
 *          is done automatically by the system [IN].
 * @return  RNET_IN_USE        Another connection bound to the same address/port.
 *      RNET_NOT_INITIALIZED  NET subsystem not initialized (internal error).
 *      RNET_INTERNAL_ERR    Network subsystem failed.
 *      RNET_INVALID_PARAMETER  Invalid connection ID.
 *                or  Specified address not a valid address
 *      RNET_NOT_READY      Still processing a callback function.
 *      RNET_MEMORY_ERR      Not enough buffers available, too many connections.
 *      RNET_OK          Connection successfully bound.
 */

T_RNET_RET rnet_rt_bind (T_RNET_DESC * desc,
            T_RNET_IP_ADDR local_addr,
            T_RNET_PORT local_port)
{
  NGsockaddr addr;
  int err;

  /* convert address to network-byte order */
  addr.sin_port = ngHTONS( local_port);
  addr.sin_addr = ngHTONL( local_addr);

  /* bind local address & port */
  rvf_lock_mutex( &rnet_rt_env_ctrl_blk_p->mutex);
  err = ngSAIOBind( (NGsock *) desc, &addr);
  rvf_unlock_mutex( &rnet_rt_env_ctrl_blk_p->mutex);

  return( rnet_rt_ngip_error( err));
}

#endif /* ifdef RNET_CFG_REAL_TRANSPORT */