view src/g23m-gprs/grlc/grlc_gfff.c @ 303:f76436d19a7a default tip

!GPRS config: fix long-standing AT+COPS chance hanging bug There has been a long-standing bug in FreeCalypso going back years: sometimes in the AT command bring-up sequence of an ACI-only MS, the AT+COPS command would produce only a power scan followed by cessation of protocol stack activity (only L1 ADC traces), instead of the expected network search sequence. This behaviour was seen in different FC firmware versions going back to Citrine, and seemed to follow some law of chance, not reliably repeatable. This bug has been tracked down and found to be specific to !GPRS configuration, stemming from our TCS2/TCS3 hybrid and reconstruction of !GPRS support that was bitrotten in TCS3.2/LoCosto version. ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3 version and had to be pulled from TCS2 - but as it turns out, there is a new field in the MMR_REG_REQ primitive that needs to be set correctly, and that psa_mms.c module is the place where this initialization needed to be added.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 08 Jun 2023 08:23:37 +0000
parents fa8dc04885d8
children
line wrap: on
line source

/*  
+----------------------------------------------------------------------------- 
|  Project :  GPRS (8441)
|  Modul   :  GRLC
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  This module implements local functions for service GFF of
|             entity GRLC.
+----------------------------------------------------------------------------- 
*/ 

#ifndef  GRLC_GFFF_C
#define  GRLC_GFFF_C
#endif

#define ENTITY_GRLC

/*==== INCLUDES =============================================================*/
#include <string.h>
#include "typedefs.h"   /* to get Condat data types */
#include <stdio.h>
#include "vsi.h"        /* to get a lot of macros */
#include "macdef.h"
#include "gprs.h"
#include "gsm.h"        /* to get a lot of macros */
#include "ccdapi.h"     /* to get CCD API */
#include "prim.h"       /* to get the definitions of used SAP and directions */
#include "message.h"
#include "grlc.h"        
#include "grlc_f.h" 
#include "grlc_tms.h"   
#include "grlc_rus.h"   
#include "grlc_rds.h"   
#include "grlc_gfff.h"        
#include "cl_rlcmac.h"

/*==== CONST ================================================================*/

#define D_DL_DUMMY_c 0x25

/*==== LOCAL VARS ===========================================================*/

/*==== PRIVATE FUNCTIONS ====================================================*/

/*==== PUBLIC FUNCTIONS =====================================================*/

/*
+------------------------------------------------------------------------------
| Function    : gff_init
+------------------------------------------------------------------------------
| Description : The function gff_init() .... 
|
| Parameters  : dummy - description of parameter dummy
|
+------------------------------------------------------------------------------
*/
GLOBAL void gff_init ( void )
{ 
  TRACE_FUNCTION( "gff_init" );

  grlc_data->gff.rlc_status = RLC_STATUS_NULL;
  grlc_data->ul_tfi         = 0xFF;
  grlc_data->dl_tfi         = 0xFF;

  grlc_data->next_poll_fn      = 1;
  grlc_data->ul_poll_pos_index = 0xFF;
  grlc_data->nr_of_crc_errors  = 0xFFFF;
  grlc_data->ta_value          = 0xFF;

  INIT_STATE(GFF,GFF_DEACTIVE); 
} /* gff_init() */



/*
+------------------------------------------------------------------------------
| Function    : gff_tbf_init
+------------------------------------------------------------------------------
| Description : The function gff_tbf_init() .... 
|
| Parameters  : dummy - description of parameter dummy
|
+------------------------------------------------------------------------------
*/
GLOBAL void gff_tbf_init ( void )
{ 
  TRACE_FUNCTION( "gff_tbf_init" );
 
  /*
   * set segmented control block array
   */
  grlc_data->ul_poll_pos_index = 0;
  grlc_data->nr_of_crc_errors  = 0;


#if defined (_TARGET_)
  {
    UBYTE i;
    /* target debugging*/

    grlc_data->last_dl_fn = 1; 
    
    for (i=0; i < CALL_ERROR_NR_OF_ST_FN;i++)
    {
      grlc_data->ul_fn_store[i]  = 0;
      grlc_data->ul_fn_errors[i] = 0;
      grlc_data->dl_fn_store[i]  = 0;
      grlc_data->dl_fn_errors[i] = 0;
    }
    grlc_data->ul_cnt_syn        = 0;  /*for target, count calls in rlc uplink*/
    grlc_data->ul_cnt_asyn       = 0;  /*for target, count calls in gffp mac_ready_ind*/
    grlc_data->dl_cnt_syn        = 0;  /*for target, count calls in rlc downlink*/
    grlc_data->dl_cnt_asyn       = 0;  /*for target, count calls in gffp mac_data_ind*/
    grlc_data->ul_call_errors    = 0;  /*for target, count calls in rlc uplink during grlc is active*/
    grlc_data->dl_call_errors    = 0;  /*for target, count calls in rlc downlink during grlc is active*/
  }
#endif /* defined (_TARGET_) */

} /* gff_tbf_init() */



/*
+------------------------------------------------------------------------------
| Function    : gff_send_ctrl_block
+------------------------------------------------------------------------------
| Description : The function gff_send_ctrl_block() .... 
|
| Parameters  : dummy - description of parameter dummy
|
+------------------------------------------------------------------------------
*/
GLOBAL void gff_send_ctrl_block (ULONG fn_i, UBYTE tn_i, UBYTE * ptr_ctrl_block_i )
{
  PALLOC(cgrlc_data_ind,CGRLC_DATA_IND); /*T_CGRLC_DATA_IND*/

  TRACE_FUNCTION( "gff_send_ctrl_block" );

  cgrlc_data_ind->fn = fn_i;
  cgrlc_data_ind->tn = tn_i;  

  memcpy( cgrlc_data_ind->data_array, 
          ptr_ctrl_block_i,
          CGRLC_MAX_CTRL_MSG_SIZE );

  PSEND(hCommGRR,cgrlc_data_ind);

}/* gff_send_ctrl_block() */




/*
+------------------------------------------------------------------------------
| Function    : gff_analyse_dl_data
+------------------------------------------------------------------------------
| Description : The function gff_analyse_dl_data() .... It returns whether
|               the downlink block was intended for that MS or not.
|
| Parameters  : dummy - description of parameter dummy
|
+------------------------------------------------------------------------------
*/
GLOBAL BOOL gff_analyse_dl_data (ULONG fn_i, T_dl_data * ptr_dl_data_i )
{ 

  BOOL        tfi_correct = FALSE;
  UBYTE       payload,rrbp,sp,tfi,*ptr_blk;

  TRACE_FUNCTION( "gff_analyse_dl_data" );

/*
 *  Layer 1 buffer
 *  B1 B0  --> ptr_dl_data_i->dl_block[0]
 *  B3 B2
 *
 * B0 is the mac header
 */


  ptr_blk = (UBYTE *) (&ptr_dl_data_i->dl_block[0]);


  payload = (ptr_blk[0] & 0xC0) >> 6;
  rrbp    = (ptr_blk[0] & 0x30) >> 4;
  sp      = (ptr_blk[0] & 0x08) >> 3;

  
  /* 
   * In Test mode B,if there is CRC error on the payload data the MS will,
   * where required by the USF, transmit the decoded payload data. The block
   * transmitted will be a valid uplink block format.
   */
  if(((ptr_dl_data_i->block_status & 0x0100) NEQ 0x0000) AND ((grlc_data->testmode.mode EQ CGRLC_LOOP)))
  {
    UBYTE       bsn,e_bit;
     
    bsn     = (ptr_blk[2] & 0xFE)>>1;
    e_bit   = (ptr_blk[2] & 0x01);
    
    TRACE_EVENT(" Bad CRC - In Testmode B ");

    sig_gff_rd_data(  fn_i, 
                        (UBYTE)ptr_dl_data_i->tn, 
                        ptr_dl_data_i->block_status,
                        rrbp,
                        sp,
                        bsn,
                        0,
                        e_bit,
                        ptr_blk);
  }
  else
  {
    if(payload EQ RLC_DATA_BLOCK) 
    {
      UBYTE       bsn,fbi,e_bit;
     
      tfi     = (ptr_blk[1] & 0x3E) >> 1;
      bsn     = (ptr_blk[2] & 0xFE)>>1;
      fbi     = (ptr_blk[1] & 0x01);
      e_bit   = (ptr_blk[2] & 0x01);
      ptr_blk = (UBYTE *) (&ptr_blk[3]);

      if((tfi EQ grlc_data->dl_tfi) AND
         ((0x80>>ptr_dl_data_i->tn) & grlc_data->dl_tn_mask))
      {
        tfi_correct = TRUE;
        if(sp)
        {
          grlc_save_poll_pos ( fn_i,(UBYTE)ptr_dl_data_i->tn,rrbp, CGRLC_POLL_DATA, 3);
        }
        sig_gff_rd_data(  fn_i, 
                          (UBYTE)ptr_dl_data_i->tn, 
                          ptr_dl_data_i->block_status,
                          rrbp,
                          sp,
                          bsn,
                          fbi,
                          e_bit,
                          ptr_blk);
  #ifdef _TARGET_
      
        TRACE_BINDUMP( hCommGRLC, TC_USER6,
                 		  "D_DATA_BLOCK including MAC header", &ptr_dl_data_i->dl_block[0],53);
  #endif /* _TARGET_ */

      }
      else
      {
        TRACE_EVENT_P6("wrong tfi in data block  ad.tfi=%d dl_tfi=%d  bsn=%d || tn=%d->mask=%x tn_mask=%x"
                                                                ,tfi
                                                                ,grlc_data->dl_tfi
                                                                ,bsn
                                                                ,ptr_dl_data_i->tn
                                                                ,(0x80>>ptr_dl_data_i->tn)
                                                                ,grlc_data->dl_tn_mask);
      }


    }
    else
    {
      /*
       * any rlc control message received.
       * check if it is a packet uplink ack/nack and if it is adressed to MS
       */
      ULONG tc_user        = TC_USER4;
      UBYTE trace_msg_type = D_MSG_TYPE_UNKNOWN_c;

      UBYTE msg_type=0,i=0;

      if( payload EQ CTRL_BLK_NO_OPT )
      {
        msg_type = trace_msg_type = ptr_blk[1]>>2; 
        i        = 2; /* Byte position of tfi in puan */
      }
      else if( payload EQ CTRL_BLK_OPT )
      {
        if( !(ptr_blk[1] & 0x01) )           /* no tfi octet present: ac   = 0 */
        {
          if( !(ptr_blk[1] & 0x80) )         /* not segmented       : rbsn = 0 */
          {
            if( (ptr_blk[1] & 0x02) )        /* not segmented       : fs   = 1 */ 
            {
              msg_type = trace_msg_type = ptr_blk[2]>>2; 
              i        = 3; /* Byte position of tfi in puan */
            }
            else                             /* segmented           : fs   = 0 */
            {
              trace_msg_type = ptr_blk[2]>>2; 
            }
          }
          else                               /* segmented           : rbsn = 1 */
          {
            trace_msg_type = D_MSG_TYPE_2ND_SEGMENT_c;
          }
        }
        else                                 /* tfi octet present   : ac   = 1 */
        {
          if( !(ptr_blk[1] & 0x80) )         /* not segmented       : rbsn = 0 */ 
          {
            if( (ptr_blk[1] & 0x02) )        /* not segmented       : fs   = 1 */
            {
              msg_type = trace_msg_type = ptr_blk[3]>>2;
              i        = 4; /* Byte position of tfi in puan */
            }
            else                             /* segmented           : fs   = 0 */
            {
              trace_msg_type = ptr_blk[3]>>2;
            }
          }
          else                               /* segmented           : rbsn = 1 */ 
          {
            trace_msg_type = D_MSG_TYPE_2ND_SEGMENT_c;
          }
        }
      }

      /*
       * send control message to GRR
       */
      if(msg_type NEQ D_DL_DUMMY_c ) /* No Dummy blocks sent to GRR , to primitive load between GRR and GRLC*/
      {  
        gff_send_ctrl_block(fn_i, (UBYTE)ptr_dl_data_i->tn,ptr_blk);
      }
  
      if( trace_msg_type EQ D_DL_DUMMY_c )
      {
        tc_user = TC_USER5;
      }

      TRACE_BINDUMP( hCommGRLC, tc_user,
                     cl_rlcmac_get_msg_name( trace_msg_type, RLC_MAC_ROUTE_DL ),
                     ptr_blk, MAX_L2_FRAME_SIZE ); /*lint !e569*/

      if(msg_type EQ D_GRLC_UL_ACK_c)
      {
        /*
         * tfi check for packet uplink ack nack
         */
        if(i EQ 4                AND                          /* tfi in header present       */
          !(ptr_blk[2] & 0x01)   AND                          /* D=0 packet uplink tfi add.  */
          (((ptr_blk[2]) & 0x3E)>>1) EQ grlc_data->ul_tfi)    /* header tfi addressed to MS  */
        {
          tfi = ((ptr_blk[2]) & 0x3E)>>1;
        }
        else
        {
          tfi = ((ptr_blk[i]) & 0x3E)>>1;  /* Take tfi from airmessage*/
        }

        if((grlc_data->ul_tfi EQ tfi) AND
           ((0x80>>ptr_dl_data_i->tn) & grlc_data->ul_tn_mask))
        {
          T_MSGBUF msg;
          UBYTE    data[22];

          memset(data,0xEE,22);

          msg.l_buf  = (23 - i + 1) * 8;
          msg.o_buf  = 0;
          msg.buf[0] = data[0];

          memcpy(msg.buf, &(ptr_blk[i-1]), (msg.l_buf)/8);


          if(sp)
          {
            grlc_save_poll_pos ( fn_i,(UBYTE)ptr_dl_data_i->tn,rrbp, CGRLC_POLL_UACK, 3);
          }
          grlc_decode_grlc (&msg);
          sig_gff_ru_ul_ack ( fn_i,(UBYTE)ptr_dl_data_i->tn,rrbp,sp); 
        } 
      }
    }
  }


  return( tfi_correct );
} /* gff_analyse_dl_data() */


/*
+------------------------------------------------------------------------------
| Function    : gff_handle_continious_ta
+------------------------------------------------------------------------------
| Description : store the new ta value, and pass it to L1
|
| Parameters  : 
|
+------------------------------------------------------------------------------
*/
GLOBAL void gff_handle_continious_ta ( void )
{

  TRACE_FUNCTION( "gff_handle_continious_ta" );

 
  if(grlc_data->func.mac_ready_ind.ta_value NEQ 0xFF)
  {
    /*
     * valid TA in L1
     */
    if(grlc_data->ta_value NEQ grlc_data->func.mac_ready_ind.ta_value )
    {
      PALLOC(cgrlc_ta_value_ind,CGRLC_TA_VALUE_IND);

      /*
       * Current TA in GRLC differs from the TA in L1: store in GRLC
       */
      grlc_data->ta_value           = grlc_data->func.mac_ready_ind.ta_value;
      cgrlc_ta_value_ind->ta_value  = grlc_data->ta_value;
      PSEND(hCommGRR,cgrlc_ta_value_ind);
    }
  }

} /* gff_handle_continious_ta */

/*
+------------------------------------------------------------------------------
| Function    : gff_clip_rxlev
+------------------------------------------------------------------------------
| Description : This function is used to clip received signal level values.
|
| Parameters  : clipp  - pointer to clipped received signal level values
|               rxlev  - pointer to received signal level values
|               number - number of received signal level values
|
+------------------------------------------------------------------------------
*/
GLOBAL void gff_clip_rxlev ( UBYTE *clipp, UBYTE *rxlev, UBYTE number )
{ 
  UBYTE i; /* used for counting */
  
  TRACE_FUNCTION( "gff_clip_rxlev" );

  for( i = 0; i < number; i++ )
  { 
    if( (signed char)( rxlev[i] ) <   MAC_RXLEV_MIN  AND
                       rxlev[i]   NEQ MAC_RXLEV_NONE     )
    {
      clipp[i] = MAC_RXLEV_MIN;
    }
    else if ( (signed char)( rxlev[i] ) > MAC_RXLEV_MAX )
    {
      clipp[i] = MAC_RXLEV_MAX;
    }
    else if( rxlev[i] EQ MAC_RXLEV_NONE )
    {
      clipp[i] = MAC_RXLEV_NONE;
    }
    else
    {
      clipp[i] = rxlev[i];
    }
  }
} /* gff_clip_rxlev() */