FreeCalypso > hg > fc-tourmaline
view src/gpf/ccd/tdd_ci.c @ 303:f76436d19a7a default tip
!GPRS config: fix long-standing AT+COPS chance hanging bug
There has been a long-standing bug in FreeCalypso going back years:
sometimes in the AT command bring-up sequence of an ACI-only MS,
the AT+COPS command would produce only a power scan followed by
cessation of protocol stack activity (only L1 ADC traces), instead
of the expected network search sequence. This behaviour was seen
in different FC firmware versions going back to Citrine, and seemed
to follow some law of chance, not reliably repeatable.
This bug has been tracked down and found to be specific to !GPRS
configuration, stemming from our TCS2/TCS3 hybrid and reconstruction
of !GPRS support that was bitrotten in TCS3.2/LoCosto version.
ACI module psa_mms.c, needed only for !GPRS, was missing in the TCS3
version and had to be pulled from TCS2 - but as it turns out,
there is a new field in the MMR_REG_REQ primitive that needs to be
set correctly, and that psa_mms.c module is the place where this
initialization needed to be added.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 08 Jun 2023 08:23:37 +0000 |
parents | 4e78acac3d88 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : CCD | Modul : tdd_ci.c +----------------------------------------------------------------------------- | Copyright 2004 Texas Instruments Deutschland GmbH | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Deutschland GmbH | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Deutschland GmbH. +----------------------------------------------------------------------------- | Purpose : Definition of encoding and decoding functions for TDD_CI type +----------------------------------------------------------------------------- */ /* * standard definitions like GLOBAL, UCHAR, ERROR etc. */ #include "typedefs.h" #include "header.h" /* * Types and functions for bit access and manipulation */ #include "ccd_globs.h" /* * Prototypes of ccd internal functions */ #include "ccd.h" #include "bitfun.h" /* * Declaration of coder/decoder tables */ #include "ccdtable.h" /* * Function prototypes of CCD-CCDDATA interface */ #include "ccddata.h" #if !(defined (CCD_TEST)) #include "vsi.h" #endif #ifndef RUN_INT_RAM /* Attention: static data, only used in cdc_tdd_ci_decode */ static const U8 params_bSize[21] = { 0, 9, 17, 25, 32, 39, 46, 53, 59, 65, 71, 77, 83, 89, 95, 101, 106, 111, 116, 121, 126 }; /* +--------------------------------------------------------------------+ | PROJECT : CCD MODULE : cdc_tdd_ci_decode | +--------------------------------------------------------------------+ PURPOSE : Decoding of the TDD_CELL_INFORMATION Field reusing RANGE 511 format of frequency lists (with w0=0.). This field allows to compute a set of 9-bit-long TDD_CELL_INFORMATION aprameters. The IE is preceded by TDD_Indic0(1 bit) and made of the following two IEs: 1) NR_OF_TDD_CELLS(5 bit field), 2) TDD_CELL_INFORMATION information parameters TDD_Indic0 indicates if the parameter value '0000000000' is a member of the set. The total number of bits q of this field depends on the value of the parameter NR_OF_TDD_CELLS = m as follows (with q=0 if m=0): m q m q m q m q m q 0 0 5 39 10 71 15 101 20 126 1 9 6 46 11 77 16 106 21-31 0 2 17 7 53 12 83 17 111 3 25 8 59 13 89 18 116 4 32 9 65 14 95 19 121 The message is sent from net to MS and a MS supporting enhanced measurements has to understand it. The space this IE takes in the C-structure is made of a counter for the number of decoded parameter and an array of them. */ SHORT cdc_tdd_ci_decode (const ULONG c_ref, const ULONG e_ref, T_CCD_Globs *globs) { U8 ListSize = 0; U16 ListBitLen = 0; ULONG cix_ref, num_prolog_steps, prolog_step_ref; short *w; #ifdef DEBUG_CCD TRACE_CCD (globs, "cdc_tdd_ci_decode()"); #ifdef CCD_SYMBOLS TRACE_CCD (globs, "decoding list %s with range 512 format", ccddata_get_alias((USHORT) e_ref, 1)); #else TRACE_CCD (globs, "decoding list %d of range 512 format", melem[e_ref].elemRef); #endif #endif globs->SeekTLVExt = FALSE; cix_ref = melem[e_ref].calcIdxRef; num_prolog_steps = calcidx[cix_ref].numPrologSteps; prolog_step_ref = calcidx[cix_ref].prologStepRef; /* * if this element have a defined Prolog * we have to process it before decoding the bitstream */ if (num_prolog_steps) { ccd_performOperations (num_prolog_steps, prolog_step_ref, globs); } /* * First read NR_OF_TDD_CELLS (5 bits). */ globs->pstructOffs = melem[e_ref].structOffs;; bf_readBits (5, globs); ListSize = globs->pstruct[globs->pstructOffs++]; /* If n=0 there is nothing to do for this IE. */ if (!ListSize) { return 1; } /* Read the corresponding bit number or suppose the maximum length. */ if (ListSize <= 20) { ListBitLen = params_bSize [ListSize]; } else { /* If n>20 there is nothing to do for this IE. */ return 1; } /* * Bit size for params is bigger than the size of unread bits in the * message buffer. Danger: buffer overwriting! */ if ( ListBitLen > globs->maxBitpos - globs->bitpos) { ccd_recordFault (globs, ERR_ELEM_LEN, BREAK, (USHORT) e_ref, globs->pstruct + globs->pstructOffs); ListBitLen = (U16)(globs->maxBitpos - globs->bitpos); } /* * Use dynamic memory for calculation instead of global memory or stack. */ MALLOC (w, 257 * sizeof (U16)); /* * Decode the W-parameter. * As a rule for this type w(0) must be 0. */ w[0] = 0; cdc_decode_param (param_512+1, &w[1], ListBitLen, globs); /* * Decode and set the remaining channel number according the * algorithm described in GSM 4.08. */ cdc_decode_frequencies (511, &w[1], 0, TDD_CI_LIST, globs); /* Free the dynamic allocated memory. */ MFREE (w); return 1; } #endif /* !RUN_INT_RAM */ #ifndef RUN_INT_RAM /* +--------------------------------------------------------------------+ | PROJECT : CCD MODULE : cdc_tdd_ci_encode | +--------------------------------------------------------------------+ PURPOSE : Encoding function is not needed, since this message is sent from net to MS. It could be only useful for testing procedure if there were an encoder function at this place. This will be a future work. */ SHORT cdc_tdd_ci_encode (const ULONG c_ref, const ULONG e_ref, T_CCD_Globs *globs) { #ifdef DEBUG_CCD TRACE_CCD (globs, "cdc_tdd_ci_encode()"); #endif #ifdef TARGET_WIN32 /* TBD */ #endif return 1; } #endif /* !RUN_INT_RAM */