FreeCalypso > hg > fc-usbser-tools

annotate doc/FTDI-EEPROM-tools @ 72:6dc3aa777fd6

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
doc/FTDI-EEPROM-format: document config file language
author Mychaela Falconia <falcon@freecalypso.org>
date Mon, 25 Sep 2023 00:04:22 +0000
parents 9cfe3223fbf8
children 930bd5316d56
Ignore whitespace changes - Everywhere: Within whitespace: At end of lines:
rev   line source
34
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
1 Mother Mychaela has developed a set of Linux command line tools for manipulating
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
2 configuration EEPROMs that are attached to FT2232x devices and accessed in-band
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
3 via USB. This document describes these tools.
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
4
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
5 Supported FTDI chips and EEPROMs
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
6 ================================
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
7
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
8 The present tools work with 93C46, 93C56 and 93C66 EEPROMs attached behind
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
9 FT2232x dual-channel UART/FIFO/MPSSE/etc chips, both FT2232C/D and FT2232H.
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
10 We can read these EEPROMs for examination or backup, and we can program them
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
11 with new bits, either restoring a previously saved backup or creating a new
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
12 from-scratch configuration. These EEPROM configurations (which we can save,
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
13 restore or create from scratch) set the USB VID:PID and the textual strings
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
14 naming the manufacturer, the product model and an optional serial number,
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
15 select whether each FT2232x channel will come up in the default UART mode or
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
16 one of the other EEPROM-configurable modes (245 FIFO, CPU-style FIFO or fast
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
17 opto-isolated serial), and allow a few other obscure chip settings to be
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
18 tweaked.
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
19
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
20 Some work has also been done toward the goal of being able to program the
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
21 internal EEPROM in FT232R chips (a very popular single-channel USB to UART
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
22 converter needing no external components), but this work should be considered
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
23 experimental: the tools appear to work on an UB232R module from Digi-Key
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
24 (presumably containing a genuine FT232RQ chip) and on a no-name FT232RL adapter
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
25 where the chip is uncertain, but because we have no real production use case
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
26 yet, we are not ready to truly vouch for FT232R support.
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
27
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
28 More generally:
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
29
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
30 * our fteeprom-read tool should be able to read out the EEPROM content from
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
31 just about any FTDI chip;
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
32
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
33 * our fteeprom-prog tool should be able to program a user-supplied set of bits
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
34 into any FTDI+EEPROM combo where the EEPROM is a separate chip, or into FT232R
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
35 internal EEPROM - but it most likely won't work for newer FT-X chips;
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
36
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
37 * if the goal is to generate a new EEPROM config from scratch, as opposed to
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
38 restoring a saved backup, we currently have generators only for FT2232C/D,
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
39 for FT2232H and for FT232R, with the last one considered experimental and not
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
40 proven.
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
41
35
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
42 No more libftdi dependency!
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
43 ===========================
34
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
44
35
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
45 Our initial implementation of fteeprom-* tools was based on libftdi; more
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
46 specifically, one had to use an old libftdi-0.x version, as these old versions
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
47 were the only ones that allowed writing to the EEPROM directly with
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
48 ftdi_write_eeprom_location() API calls. However, the present version has been
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
49 reimplemented to NOT use libftdi at all - instead we have our own minilibs,
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
50 maintained as part of fc-usbser-tools package, that are built on top of
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
51 libusb-0.x API. (The version of libftdi we used previously was also built on
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
52 top of the same libusb-0.x API, hence no change in that dependency.) The
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
53 libusb-0.x API we use consists of <usb.h> include header and -lusb link library
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
54 pull-in; on "modern" systems these pieces will typically be provided by
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
55 libusb-compat-0.1 package wrapping around libusb-1.x, but in the spirit of Holy
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
56 retrocomputing, really old systems can be used with native libusb-0.1.
34
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
57
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
58 Selecting the device to operate on
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
59 ==================================
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
60
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
61 Our fteeprom-read, fteeprom-prog and fteeprom-erase tools take a device selector
35
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
62 argument, selecting the device to operate on. The design of this device
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
63 selector mechanism has been copied from libftdi; while we no longer use libftdi,
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
64 we found its device selector mechanism to be a really good design and we have
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
65 fully reimplemented it. The device selector argument is a string in one of the
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
66 following formats (some wording copied from libftdi documentation):
34
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
67
35
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
68 d:<devicenode> - path of bus and device-node (e.g. "003/001") within USB device
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
69 tree as enumerated via libusb-0.x API. Libftdi documentation said
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
70 /proc/bus/usb, but at least on Mother's Slackware 14.2 system, the observed
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
71 location of this device tree is /dev/bus/usb.
34
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
72
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
73 i:<vendor>:<product> - first device with given vendor and product id, ids can
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
74 be decimal, octal (preceded by "0") or hex (preceded by "0x")
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
75
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
76 i:<vendor>:<product>:<index> - as above with index being the number of the
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
77 device (starting with 0) if there are more than one
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
78
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
79 s:<vendor>:<product>:<serial> - first device with given vendor id, product id
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
80 and serial string
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
81
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
82 If you have only one FTDI device connected to your PC or laptop at the time of
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
83 your EEPROM manipulation session (generally a good idea to avoid hitting the
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
84 wrong device by mistake) and if that FTDI device has some sensible starting
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
85 USB VID:PID (either from the previous EEPROM config or the chip's sans-EEPROM
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
86 default) that doesn't clash with anything else, then the i: form will probably
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
87 be the most convenient, e.g.:
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
88
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
89 i:0x0403:0x6001 for single-channel FT232x devices running with the default ID
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
90 i:0x0403:0x6010 for dual-channel FT2232x devices running with the default ID
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
91 i:0x0403:0xPPPP for custom PIDs assigned out of FTDI's VID range
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
92 i:0xVVVV:0xPPPP for totally custom USB IDs
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
93
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
94 Or if the current device config is totally hosed (the EEPROM has a passing
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
95 checksum, but sets some completely bogus USB ID), then the d: form will
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
96 probably be required for recovery.
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
97
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
98 Reading the EEPROM
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
99 ==================
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
100
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
101 The basic EEPROM read command is as follows:
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
102
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
103 fteeprom-read <device-selector>
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
104
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
105 See the previous section for the device selector argument. In this default
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
106 form the tool will read the first 64 EEPROM words, which is appropriate for
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
107 93C46 external EEPROMs or for the internal 1024-bit EEPROM in the FT232R chip.
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
108 However, if you are working with an FT2232x board with an external EEPROM and
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
109 that EEPROM is of a larger variety (93C56 or 93C66), this basic form with give
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
110 you an incomplete (truncated) read, and you will need one of the following
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
111 extended forms to read the complete EEPROM:
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
112
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
113 fteeprom-read -b <device-selector> -- read 128 EEPROM words (93C56)
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
114 fteeprom-read -B <device-selector> -- read 256 EEPROM words (93C66)
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
115
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
116 (If you use one of the extended forms on a smaller EEPROM, you will get 2 or 4
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
117 copies of the same bits.)
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
118
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
119 The output of fteeprom-read is in the same format as the input to fteeprom-prog,
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
120 thus you can redirect the output to a file and get a restorable backup copy of
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
121 your EEPROM.
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
122
35
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
123 Change from previous version
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
124 ----------------------------
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
125
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
126 In the original libftdi-based implementation of fteeprom-read, the act of
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
127 reading the EEPROM was invasive: libftdi's open function would unbind the
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
128 kernel's ftdi_sio driver (Channel A ttyUSB device disappears) and
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
129 reset/reinitialize the SIO channel itself. However, it turns out that these
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
130 invasive steps aren't needed if the goal is only to read the EEPROM - the
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
131 necessary USB control endpoint transactions can be done while the kernel's
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
132 ftdi_sio driver remains attached with ttyUSBx devices intact on all channels.
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
133 The current version of fteeprom-read has been fixed to be non-invasive in this
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
134 regard: you can now freely read the EEPROM of any connected FTDI device
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
135 *without* bumping off that device's ttyUSB.
34
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
136
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
137 Programming the EEPROM
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
138 ======================
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
139
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
140 In terms of the primitives provided over USB, writing to EEPROMs sitting behind
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
141 FTDI chips is accomplished by writing one 16-bit word at a time: the
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
142 SIO_WRITE_EEPROM_REQUEST command writes a user-supplied word at a user-supplied
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
143 EEPROM address. However, our fteeprom-prog tool currently supports only writing
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
144 complete EEPROMs (64 or 128 or 256 16-bit words starting at address 0) and we
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
145 do not currently provide any kind of "random access write" utility; the primary
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
146 reason for this design decision is practical usefulness: FTDI's EEPROM structure
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
147 includes a checksum over the first 64 words for 1024-bit EEPROMs or over the
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
148 first 128 words for larger ones, and if this checksum fails to match, the entire
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
149 structure is deemed to be invalid - hence there is no practical use case for
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
150 selectively rewriting individual words. The only exception may be with 93C66
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
151 EEPROMs: on these giants only the first half would be subject to the checksum,
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
152 and the second half could be used arbitrarily. However, we have not yet
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
153 encountered any boards out in the wild with such big EEPROMs, and we have no
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
154 plans to use such in any of our own hardware designs either, hence there is no
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
155 business case at the present moment to develop tooling support for them.
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
156
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
157 There are two primary modes of usage for our fteeprom-prog tool: restoring a
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
158 saved EEPROM backup or writing a new EEPROM config which you generate yourself.
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
159 To restore a saved EEPROM backup, run the tool as follows:
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
160
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
161 fteeprom-prog <device-selector> <eeprom-image-file>
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
162
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
163 To program a new EEPROM config of your own, run a pipeline of this form:
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
164
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
165 <generator-tool> | fteeprom-prog <device-selector>
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
166
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
167 fteeprom-prog reads the EEPROM image from stdin if no image file is named on
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
168 the command line; the image format is the same in both cases, and the length of
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
169 this EEPROM image tells the tool how many words need to be programmed - there
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
170 are no -b or -B options to fteeprom-prog.
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
171
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
172 Generator tools
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
173 ===============
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
174
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
175 Unfortunately FTDI never documented the format of their EEPROM configuration
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
176 structure - apparently they consider it a proprietary trade secret just like
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
177 the wire protocol spoken over USB between their chips and their closed-source
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
178 proprietary drivers. All FOSS community support for these chips is based on
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
179 reverse engineering, and that includes the EEPROM format.
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
180
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
181 The present suite of tools includes ftee-gen2232c and ftee-gen2232h EEPROM image
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
182 generators, meant for use with FT2232C/D and FT2232H chips, respectively. These
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
183 tools are based on the knowledge extracted from other (pre-existing) community
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
184 tools, primarily the EEPROM config code built into various libftdi versions -
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
185 we haven't done any FTDI RE of our own, instead the goal of this project has
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
186 been to create a set of tools that are better fit for production use.
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
187
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
188 Our ftee-gen2232c and ftee-gen2232h tools are invoked as follows:
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
189
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
190 ftee-gen2232[ch] [-b|-B] <config-file> [serial-num]
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
191
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
192 The output of these generator tools is meant to be piped directly into
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
193 fteeprom-prog.
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
194
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
195 The philosophy of which settings are given in the config file vs. which ones
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
196 are given on the command line reflects configuration management and factory
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
197 production line operations. In the envisioned usage there would be a config
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
198 file for each product, giving the USB VID:PID, textual manufacturer and product
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
199 ID strings and possibly other config settings which need to be changed from the
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
200 defaults, but the optional serial number string is given on the command line
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
201 because it would be different for each individual unit being programmed.
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
202
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
203 The EEPROM size selection is also made on the command line, so that the same
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
204 config can be programmed into a smaller EEPROM or a bigger one. By default our
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
205 tools generate an image suitable for a 93C46 EEPROM: the generated image is 64
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
206 words long, with a checksum in word 63, and the EEPROM type byte in FTDI's
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
207 structure is set to 0x46. Running with -b produces an image for a 93C56 EEPROM:
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
208 the EEPROM type byte is set to 0x56, and the checksum-covered image length is
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
209 extended to 128 words. Finally, -B sets things up for a 93C66 EEPROM: the
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
210 EEPROM type byte is set to 0x66, but the generated checksum-covered image is
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
211 still 128 words long just like with -b, as that is what FT2232x chips apparently
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
212 expect. I said "apparently" because I don't have any FT2232x hardware with
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
213 93C66 EEPROMs and I don't plan on acquiring or building any, hence this minimal
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
214 93C66 support is completely untested - use at your own risk.
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
215
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
216 It also needs to be noted that with our current RE-based understanding of FTDI's
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
217 undocumented EEPROM structure, using a bigger EEPROM does NOT provide more room
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
218 for strings: all that happens with -b and -B options is that a gap of 64 unused
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
219 EEPROM words is inserted between the end of the fixed structure and the
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
220 beginning of strings. The exact same arrangement has been observed in all 93C56
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
221 EEPROM images found in the wild, presumably produced with FTDI's official tools,
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
222 including FTDI's own USB-COM232-PLUS2 board - thus it is not clear at all if
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
223 FT2232x chips actually support longer strings with bigger EEPROMs, and if not,
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
224 what does one need a bigger EEPROM for...
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
225
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
226 For the format of config files read by our ftee-gen2232[ch] tools and what
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
227 settings can be tweaked, read the source code.
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
228
35
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
229 Installation directory for EEPROM config files
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
230 ----------------------------------------------
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
231
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
232 If the name of the config file passed to ftee-gen* does not contain any '/'
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
233 characters, the named file is sought first in an installation directory
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
234 (/opt/freecalypso/ftdi) and then in the current directory. To suppress this
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
235 search path and read EEPROM config files only from the current directory,
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
236 specify your config file as ./name - filenames (pathnames) containing slashes
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
237 are read as-is.
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
238
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
239 This installation directory and search mechanism have been added in order to
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
240 allow standard (usually developed at FreeCalypso HQ) FTDI EEPROM configs which
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
241 end users can then program into their boards by executing a fixed command line
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
242 given in a manual.
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
243
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
244 FT232R differences
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
245 ==================
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
246
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
247 The EEPROM generator tool for FT232R is ftee-gen232r; it works on the same
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
248 principle as ftee-gen2232[ch] for FT2232x. However, when you run fteeprom-prog
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
249 to program FT232R's internal EEPROM (whether you are restoring a backup or
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
250 programming the output of ftee-gen232r), you need to add -r option before the
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
251 device selector string. This option tells fteeprom-prog to execute the
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
252 FT232R-specific magic sequence (documented in FT232R-notes) before proceeding
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
253 to actual EEPROM writes - without this option the EEPROM content will be garbage
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
254 (bitwise AND of old and new EEPROM images), producing the appearance of a
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
255 bricked chip.
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
256
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
257 In the previous libftdi-based version of fteeprom-prog the magic sequence in
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
258 question was executed unconditionally - however, because it is needed only for
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
259 FT232R and because we could simplify our new sans-libftdi code by implementing
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
260 it in an FT232R-only manner (no support for different "index" values for
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
261 multichannel FTDI devices), we've changed it from unconditional to -r option.
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
262
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
263 Experiments show that fteeprom-prog -r option appears to be harmless (though
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
264 unnecessary) on FT2232D and FT2232H - however, Mother's recommendation is to
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
265 use it only on FT232R devices.
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
266
34
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
267 Erasing the EEPROM (making it blank)
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
268 ====================================
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
269
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
270 If you are playing with a "generic" FT2232x breakout board that is made for
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
271 tinkering, as opposed to a more finished product, such boards are typically
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
272 shipped with their EEPROMs completely blank. In that case restoring the EEPROM
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
273 to its "pristine" state after playing around would mean erasing it, i.e.,
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
274 bringing it into a blank (all ones) state. FT2232x chips provide two ways to
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
275 do so: one can explicitly write 0xFFFF into each individual EEPROM word with
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
276 SIO_WRITE_EEPROM_REQUEST, or one can send a SIO_ERASE_EEPROM_REQUEST command to
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
277 the chip, and the chip then erases the entire EEPROM. But we don't know how
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
278 the latter SIO_ERASE_EEPROM_REQUEST operation is implemented by FT2232x chips:
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
279 does the FT2232x chip go through and erase each word individually, or does it
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
280 issue an "erase full chip" opcode to the serial EEPROM? If the latter, then
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
281 according to some EEPROM datasheets that operation may not work if the EEPROM
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
282 is powered from a 3.3V rail rather than the full USB 5V - may be an issue in
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
283 FT2232H-based designs.
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
284
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
285 In any case our tools provide both ways. To perform the "automatic full chip
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
286 erase" operation, run the following command:
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
287
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
288 fteeprom-erase <device-selector>
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
289
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
290 To blank the EEPROM by writing 0xFFFF into each word, run one of the following
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
291 pipelines:
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
292
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
293 ftee-mkblank | fteeprom-prog <device-selector> -- blank a 93C46 EEPROM
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
294 ftee-mkblank -b | fteeprom-prog <device-selector> -- blank a 93C56 EEPROM
f5fbcf1ff032 doc: initial import from freecalypso-hwlab
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
295 ftee-mkblank -B | fteeprom-prog <device-selector> -- blank a 93C66 EEPROM
35
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
296
48
9cfe3223fbf8 doc/FTDI-EEPROM-tools: document -d options
Mychaela Falconia <falcon@freecalypso.org>
parents: 35
diff changeset
297 Unbinding of ftdi_sio ttyUSBx devices
9cfe3223fbf8 doc/FTDI-EEPROM-tools: document -d options
Mychaela Falconia <falcon@freecalypso.org>
parents: 35
diff changeset
298 =====================================
35
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
299
48
9cfe3223fbf8 doc/FTDI-EEPROM-tools: document -d options
Mychaela Falconia <falcon@freecalypso.org>
parents: 35
diff changeset
300 When invoked without any options, current versions of fteeprom-prog and
9cfe3223fbf8 doc/FTDI-EEPROM-tools: document -d options
Mychaela Falconia <falcon@freecalypso.org>
parents: 35
diff changeset
301 fteeprom-erase do NOT unbind the kernel's ftdi_sio driver from any of the chip's
9cfe3223fbf8 doc/FTDI-EEPROM-tools: document -d options
Mychaela Falconia <falcon@freecalypso.org>
parents: 35
diff changeset
302 interfaces, thus none of the associated ttyUSB devices disappear. This behavior
9cfe3223fbf8 doc/FTDI-EEPROM-tools: document -d options
Mychaela Falconia <falcon@freecalypso.org>
parents: 35
diff changeset
303 can be modified as follows:
35
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
304
48
9cfe3223fbf8 doc/FTDI-EEPROM-tools: document -d options
Mychaela Falconia <falcon@freecalypso.org>
parents: 35
diff changeset
305 * Both fteeprom-prog and fteeprom-erase support -d1, -d2 and -d4 options. These
9cfe3223fbf8 doc/FTDI-EEPROM-tools: document -d options
Mychaela Falconia <falcon@freecalypso.org>
parents: 35
diff changeset
306 options instruct the tool to command the kernel to unbind from one, two or
9cfe3223fbf8 doc/FTDI-EEPROM-tools: document -d options
Mychaela Falconia <falcon@freecalypso.org>
parents: 35
diff changeset
307 four interfaces on the target chip - they should be used with FT232x, FT2232x
9cfe3223fbf8 doc/FTDI-EEPROM-tools: document -d options
Mychaela Falconia <falcon@freecalypso.org>
parents: 35
diff changeset
308 and FT4232x, respectively.
35
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
309
48
9cfe3223fbf8 doc/FTDI-EEPROM-tools: document -d options
Mychaela Falconia <falcon@freecalypso.org>
parents: 35
diff changeset
310 * fteeprom-prog running with -r option (FT232R special mode) and no -d options
9cfe3223fbf8 doc/FTDI-EEPROM-tools: document -d options
Mychaela Falconia <falcon@freecalypso.org>
parents: 35
diff changeset
311 defaults to -d1. This default was made because -r option is intended only for
9cfe3223fbf8 doc/FTDI-EEPROM-tools: document -d options
Mychaela Falconia <falcon@freecalypso.org>
parents: 35
diff changeset
312 FT232R, which is known to be a single-channel chip, and the special magic
9cfe3223fbf8 doc/FTDI-EEPROM-tools: document -d options
Mychaela Falconia <falcon@freecalypso.org>
parents: 35
diff changeset
313 sequence is invasive/disruptive to normal UART operation, hence it isn't
9cfe3223fbf8 doc/FTDI-EEPROM-tools: document -d options
Mychaela Falconia <falcon@freecalypso.org>
parents: 35
diff changeset
314 really compatible with ttyUSB sticking around. If you are a hacker and you
9cfe3223fbf8 doc/FTDI-EEPROM-tools: document -d options
Mychaela Falconia <falcon@freecalypso.org>
parents: 35
diff changeset
315 really know what you are doing, you can defeat this logic with -r -d0.
35
f548ae912622 doc/FTDI-EEPROM-tools: update for 2023 sans-libftdi version
Mychaela Falconia <falcon@freecalypso.org>
parents: 34
diff changeset
316
48
9cfe3223fbf8 doc/FTDI-EEPROM-tools: document -d options
Mychaela Falconia <falcon@freecalypso.org>
parents: 35
diff changeset
317 Please refer to Replug-after-EEPROM-write article for additional notes.