FreeCalypso > hg > freecalypso-citrine

comparison g23m-aci/aci/cmh_mmt.c @ 0:75a11d740a02

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
initial import of gsm-fw from freecalypso-sw rev 1033:5ab737ac3ad7
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 09 Jun 2016 00:02:41 +0000
parents
children
comparison
equal deleted inserted replaced
-1:000000000000 0:75a11d740a02
1 /*
2 +-----------------------------------------------------------------------------
3 | Project : GSM-PS (6147)
4 | Modul : CMH_MMT
5 +-----------------------------------------------------------------------------
6 | Copyright 2002 Texas Instruments Berlin, AG
7 | All rights reserved.
8 |
9 | This file is confidential and a trade secret of Texas
10 | Instruments Berlin, AG
11 | The receipt of or possession of this file does not convey
12 | any rights to reproduce or disclose its contents or to
13 | manufacture, use, or sell anything it may describe, in
14 | whole, or in part, without the specific written consent of
15 | Texas Instruments Berlin, AG.
16 +-----------------------------------------------------------------------------
17 | Purpose : This module provides the test functions related to the
18 | protocol stack adapter for mobility management.
19 +-----------------------------------------------------------------------------
20 */
21
22 #ifndef CMH_MMT_C
23 #define CMH_MMT_C
24 #endif
25
26 #include "config.h"
27 #include "fixedconf.h"
28 #include "condat-features.h"
29 #include "aci_conf.h"
30
31 #include "aci_all.h"
32
33 /*==== INCLUDES ===================================================*/
34 #include "aci_cmh.h"
35
36
37 #ifdef FAX_AND_DATA
38 #include "aci_fd.h"
39 #endif /* of #ifdef FAX_AND_DATA */
40
41 #include "psa.h"
42 #include "psa_mm.h"
43 #include "cmh.h"
44 #include "cmh_mm.h"
45
46
47 #ifdef GPRS
48 #ifdef DTI
49 #include "dti_conn_mng.h"
50 #endif
51 #include "gaci.h"
52 #include "gaci_cmh.h"
53 #include "psa_gmm.h"
54 #include "cmh_gmm.h"
55 #endif
56
57 /*==== CONSTANTS ==================================================*/
58
59 /*==== EXPORT =====================================================*/
60
61 /*==== VARIABLES ==================================================*/
62
63 /*==== FUNCTIONS ==================================================*/
64 LOCAL T_ACI_RETURN get_available_network_list ( T_ACI_CMD_SRC srcId,
65 T_ACI_AT_CMD cmd,
66 SHORT startIdx,
67 SHORT * lastIdx,
68 T_ACI_COPS_OPDESC * operLst);
69 LOCAL T_ACI_RETURN tAT_Plus_Percent_COPS ( T_ACI_AT_CMD at_cmd_id,
70 T_ACI_CMD_SRC srcId,
71 SHORT startIdx,
72 SHORT * lastIdx,
73 T_ACI_COPS_OPDESC * operLst );
74
75 /*
76 +--------------------------------------------------------------------+
77 | PROJECT : GSM-PS (6147) MODULE : CMH_MMQ |
78 | STATE : code ROUTINE : qAT_PercentBAND |
79 +--------------------------------------------------------------------+
80
81 PURPOSE : This is the functional counterpart to the %BAND=? AT command
82 which returns the current multiband configuration.
83
84 <MaxBandMode>: highest value of supported band switch modes.
85 <AllowedBands>: bitfield of supported bands (manufacturer defined).
86 */
87
88 GLOBAL T_ACI_RETURN tAT_PercentBAND(T_ACI_CMD_SRC srcId,
89 T_ACI_BAND_MODE *MaxBandMode,
90 UBYTE *AllowedBands)
91 {
92 UBYTE dummy;
93
94 TRACE_FUNCTION ("tAT_PercentBAND()");
95
96 /* check command source */
97 if(!cmh_IsVldCmdSrc (srcId))
98 {
99 return( AT_FAIL );
100 }
101
102 /* process MaxBandMode parameter */
103 if(MaxBandMode NEQ NULL)
104 {
105 *MaxBandMode = BAND_MODE_Manual; /* it is currently the highest value for BandMode */
106 }
107
108 /* process BandTypeList parameter */
109 if( AllowedBands NEQ NULL )
110 {
111 if(cmhMM_getBandSettings(&dummy, AllowedBands))
112 {
113 TRACE_FUNCTION("cmhMM_getBandSettings: data reading from FFS successful");
114 }
115 else
116 {
117 TRACE_FUNCTION("cmhMM_getBandSettings: data reading from FFS failed");
118 }
119 }
120 return( AT_CMPL );
121 }
122
123
124 /*
125 +--------------------------------------------------------------------+
126 | PROJECT : GSM-PS (6147) MODULE : CMH_MMT |
127 | STATE : code ROUTINE : tAT_PlusCOPS |
128 +--------------------------------------------------------------------+
129
130 PURPOSE : This is the functional counterpart to the +COPS=? AT command
131 which is responsible to test for all available network
132 operators.
133
134 <startIdx>: Start index for reading the list.
135 Must be zero.
136 <lastIdx> : Last index buffers the last read index of the list.
137 Not used, maintained for compatibility reasons.
138 <operLst> : List buffer to copy MAX_OPER entries into.
139 Not used, maintained for compatibility reasons.
140
141 */
142
143 GLOBAL T_ACI_RETURN tAT_PlusCOPS ( T_ACI_CMD_SRC srcId,
144 SHORT startIdx,
145 SHORT * lastIdx,
146 T_ACI_COPS_OPDESC * operLst)
147 {
148 /* Implements Measure 29 */
149 return ( tAT_Plus_Percent_COPS( AT_CMD_COPS, srcId, startIdx,
150 lastIdx, operLst ) );
151 }
152
153 /*
154 +--------------------------------------------------------------------+
155 | PROJECT : GSM-PS (6147) MODULE : CMH_MMT |
156 | STATE : code ROUTINE : tAT_PercentNRG |
157 +--------------------------------------------------------------------+
158
159 PURPOSE : This is the functional counterpart to the %NRG=?
160 */
161
162 GLOBAL T_ACI_RETURN tAT_PercentNRG ( T_ACI_CMD_SRC srcId, T_ACI_NRG *NRG_options)
163 {
164
165 TRACE_FUNCTION ("tAT_PercentNRG()");
166
167 /*
168 *-------------------------------------------------------------------
169 * check command source
170 *-------------------------------------------------------------------
171 */
172 if(!cmh_IsVldCmdSrc (srcId))
173 {
174 return( AT_FAIL );
175 }
176
177 /*
178 *-------------------------------------------------------------------
179 * check entity status
180 *-------------------------------------------------------------------
181 */
182 if( mmEntStat.curCmd NEQ AT_CMD_NONE )
183 {
184 TRACE_EVENT("mmEntStat.curCmd NEQ AT_CMD_NONE");
185 return( AT_BUSY );
186 }
187 /*
188 * The response depends upon the value of the PLMN Mode bit.
189 */
190
191 NRG_options->reg_mode = NRG_REG_NotPresent;
192 NRG_options->srv_mode = NRG_SRV_NotPresent;
193 NRG_options->opr_frmt = NRG_OPR_NotPresent;
194
195 NRG_options->srv_mode = (T_ACI_NRG_SRV)
196 (NRG_options->srv_mode | NRG_SRV_Full | NRG_SRV_Limited | NRG_SRV_NoSrv | NRG_SRV_SetRegModeOnly);
197 NRG_options->opr_frmt = (T_ACI_NRG_OPR)
198 (NRG_options->opr_frmt | NRG_OPR_Long | NRG_OPR_Short | NRG_OPR_Numeric);
199 NRG_options->reg_mode = (T_ACI_NRG_REG)(NRG_options->reg_mode | NRG_REG_Auto);
200
201 if(cmhSIM_isplmnmodebit_set())
202 {
203 NRG_options->reg_mode = (T_ACI_NRG_REG)(NRG_options->reg_mode | NRG_REG_Manual | NRG_REG_Both);
204 }
205
206 return(AT_CMPL);
207
208 }
209
210 /*
211 +--------------------------------------------------------------------+
212 | PROJECT : GSM-PS (6147) MODULE : CMH_MMT |
213 | STATE : code ROUTINE : tAT_PercentCOPS |
214 +--------------------------------------------------------------------+
215
216 PURPOSE : This is the functional counterpart to the %COPS=? AT command
217 which is responsible to test for all available network
218 operators.
219
220 <startIdx>: start index for reading the list.
221 <lastIdx> : last index buffers the last read index of the
222 list
223 <operLst> : list buffer to copy MAX_OPER entries into.
224 */
225
226 GLOBAL T_ACI_RETURN tAT_PercentCOPS ( T_ACI_CMD_SRC srcId,
227 SHORT startIdx,
228 SHORT * lastIdx,
229 T_ACI_COPS_OPDESC * operLst)
230 {
231 /* Implements Measure 29 */
232 return ( tAT_Plus_Percent_COPS( AT_CMD_P_COPS, srcId, startIdx,
233 lastIdx, operLst ) );
234 }
235
236
237 /*
238 +--------------------------------------------------------------------+
239 | PROJECT : GSM-PS (6147) MODULE : CMH_MMT |
240 | STATE : code ROUTINE : get_available_network_list|
241 +--------------------------------------------------------------------+
242
243 PURPOSE : This is common function for +COPS and %COPS test functions.
244 */
245
246 LOCAL T_ACI_RETURN get_available_network_list ( T_ACI_CMD_SRC srcId,
247 T_ACI_AT_CMD cmd,
248 SHORT startIdx,
249 SHORT * lastIdx,
250 T_ACI_COPS_OPDESC * operLst)
251 {
252 T_ACI_RETURN retCd; /* holds return code */
253
254 TRACE_FUNCTION ("get_available_network_list()");
255
256 /*
257 *-------------------------------------------------------------------
258 * process the start index parameter in case of a network search
259 *-------------------------------------------------------------------
260 */
261 if(!cmhSIM_isplmnmodebit_set())
262 {
263 ACI_ERR_DESC( ACI_ERR_CLASS_Cme, CME_ERR_OpNotAllow );
264 return( AT_FAIL );
265 }
266
267 if( startIdx EQ 0 )
268 {
269 mmEntStat.curCmd = cmd;
270 mmShrdPrm.owner = (T_OWN)srcId;
271 mmEntStat.entOwn = srcId;
272
273 #if defined (GPRS) AND defined (DTI)
274 if( psaG_MM_CMD_NET_SRCH ( ) < 0 ) /* search for network */
275 #else
276 if( psaMM_NetSrch () < 0 ) /* search for network */
277 #endif
278 {
279 TRACE_EVENT( "FATAL RETURN psaMM_NetSrch in COPS" );
280 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Internal );
281 return( AT_FAIL );
282 }
283
284 retCd = AT_EXCT;
285 }
286 else
287 {
288 /*
289 * For g23m, it makes no sense to support a startIdx different from zero
290 * as MM only delivers GMMREG_MAX_PLMN_ID PLMNs which is identical to
291 * MAX_PLMN_ID. So the MMI already gets all the desired information
292 * by the callback rAT_PlusCOPS().
293 * For other programs like Neptune this maybe different, this is for
294 * further study.
295 */
296 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
297 return( AT_FAIL );
298 }
299
300 /*
301 *-------------------------------------------------------------------
302 * log command execution
303 *-------------------------------------------------------------------
304 */
305 #if defined SMI OR defined MFW OR defined FF_MMI_RIV
306 {
307 T_ACI_CLOG cmdLog; /* holds logging info */
308 cmdLog.atCmd = cmd;
309 cmdLog.cmdType = CLOG_TYPE_Test;
310 cmdLog.retCode = retCd;
311 cmdLog.cId = ACI_NumParmNotPresent;
312 cmdLog.sId = ACI_NumParmNotPresent;
313 cmdLog.cmdPrm.tCOPS.srcId = srcId;
314 cmdLog.cmdPrm.tCOPS.startIdx = startIdx;
315 cmdLog.cmdPrm.tCOPS.lastIdx = lastIdx;
316 cmdLog.cmdPrm.tCOPS.operLst = operLst;
317
318 rAT_PercentCLOG( &cmdLog );
319 }
320 #endif
321 return( retCd );
322 }
323
324 /* Implements Measure 29 */
325 /*
326 +------------------------------------------------------------------------------
327 | Function : tAT_Plus_Percent_COPS
328 +------------------------------------------------------------------------------
329 | Description : This is the functional counterpart to the +COPS=? or %COPS=?
330 | AT command which is responsible to test for all available
331 | network.
332 | Argument at_cmd_id will be used to pass AT_CMD_COPS or
333 | AT_CMD_P_COPS in case of AT command +COPS=? or %COPS=?.
334 |
335 |
336 | Parameters : at_cmd_id - AT command identifier
337 | srcId - AT command source identifier
338 | startIdx - start index for reading the list.
339 | lastIdx - last index buffers the last read index of the
340 | list
341 | operLst - list buffer to copy MAX_OPER entries into.
342 |
343 | Return : ACI functional return codes
344 +------------------------------------------------------------------------------
345 */
346
347 LOCAL T_ACI_RETURN tAT_Plus_Percent_COPS ( T_ACI_AT_CMD at_cmd_id,
348 T_ACI_CMD_SRC srcId,
349 SHORT startIdx,
350 SHORT * lastIdx,
351 T_ACI_COPS_OPDESC * operLst )
352 {
353 TRACE_FUNCTION ( "tAT_Plus_Percent_COPS()" );
354
355 /*
356 *-------------------------------------------------------------------
357 * check command source
358 *-------------------------------------------------------------------
359 */
360 if(!cmh_IsVldCmdSrc (srcId))
361 {
362 return( AT_FAIL );
363 }
364
365 /*
366 *-------------------------------------------------------------------
367 * check entity status
368 *-------------------------------------------------------------------
369 */
370 if( mmEntStat.curCmd NEQ AT_CMD_NONE )
371 {
372 return( AT_BUSY );
373 }
374
375 /*
376 *-------------------------------------------------------------------
377 * process the start index parameter in case of a network search
378 *-------------------------------------------------------------------
379 */
380
381 return( get_available_network_list( srcId, at_cmd_id, startIdx,
382 lastIdx, operLst ) );
383
384 }
385
386 /*==== EOF ========================================================*/