--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/g23m-aci/aci/cmh_mmt.c	Thu Jun 09 00:02:41 2016 +0000
@@ -0,0 +1,386 @@
+/* 
++----------------------------------------------------------------------------- 
+|  Project :  GSM-PS (6147)
+|  Modul   :  CMH_MMT
++----------------------------------------------------------------------------- 
+|  Copyright 2002 Texas Instruments Berlin, AG 
+|                 All rights reserved. 
+| 
+|                 This file is confidential and a trade secret of Texas 
+|                 Instruments Berlin, AG 
+|                 The receipt of or possession of this file does not convey 
+|                 any rights to reproduce or disclose its contents or to 
+|                 manufacture, use, or sell anything it may describe, in 
+|                 whole, or in part, without the specific written consent of 
+|                 Texas Instruments Berlin, AG. 
++----------------------------------------------------------------------------- 
+|  Purpose :  This module provides the test functions related to the
+|             protocol stack adapter for mobility management.
++----------------------------------------------------------------------------- 
+*/ 
+
+#ifndef CMH_MMT_C
+#define CMH_MMT_C
+#endif
+
+#include "config.h"
+#include "fixedconf.h"
+#include "condat-features.h"
+#include "aci_conf.h"
+
+#include "aci_all.h"
+
+/*==== INCLUDES ===================================================*/
+#include "aci_cmh.h"
+
+
+#ifdef FAX_AND_DATA
+#include "aci_fd.h"
+#endif    /* of #ifdef FAX_AND_DATA */
+
+#include "psa.h"
+#include "psa_mm.h"
+#include "cmh.h"
+#include "cmh_mm.h"
+
+
+#ifdef GPRS 
+#ifdef DTI
+#include "dti_conn_mng.h"
+#endif
+#include "gaci.h"
+#include "gaci_cmh.h"
+#include "psa_gmm.h"
+#include "cmh_gmm.h"
+#endif
+
+/*==== CONSTANTS ==================================================*/
+
+/*==== EXPORT =====================================================*/
+
+/*==== VARIABLES ==================================================*/
+
+/*==== FUNCTIONS ==================================================*/
+LOCAL T_ACI_RETURN get_available_network_list  ( T_ACI_CMD_SRC srcId,
+                                                  T_ACI_AT_CMD cmd,
+                                                  SHORT startIdx,
+                                                  SHORT * lastIdx,
+                                                  T_ACI_COPS_OPDESC * operLst);
+LOCAL T_ACI_RETURN tAT_Plus_Percent_COPS  ( T_ACI_AT_CMD at_cmd_id,
+                                            T_ACI_CMD_SRC srcId,
+                                            SHORT startIdx,
+                                            SHORT * lastIdx,
+                                            T_ACI_COPS_OPDESC * operLst );
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_MMQ                  |
+| STATE   : code                  ROUTINE : qAT_PercentBAND             |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the %BAND=? AT command
+            which returns the current multiband configuration.
+
+            <MaxBandMode>:  highest value of supported band switch modes.
+            <AllowedBands>: bitfield of supported bands (manufacturer defined).
+*/
+
+GLOBAL T_ACI_RETURN tAT_PercentBAND(T_ACI_CMD_SRC    srcId,
+                                    T_ACI_BAND_MODE  *MaxBandMode,
+                                    UBYTE            *AllowedBands)
+{
+  UBYTE dummy;
+
+  TRACE_FUNCTION ("tAT_PercentBAND()");
+
+  /* check command source */
+  if(!cmh_IsVldCmdSrc (srcId))
+  {
+    return( AT_FAIL );
+  }
+
+  /* process MaxBandMode parameter */
+  if(MaxBandMode NEQ NULL)
+  {
+    *MaxBandMode = BAND_MODE_Manual;  /* it is currently the highest value for BandMode */ 
+  }
+  
+  /* process BandTypeList parameter */
+  if( AllowedBands NEQ NULL )
+  {
+    if(cmhMM_getBandSettings(&dummy, AllowedBands))
+    {
+      TRACE_FUNCTION("cmhMM_getBandSettings: data reading from FFS successful");
+    }
+    else
+    {
+      TRACE_FUNCTION("cmhMM_getBandSettings: data reading from FFS failed");
+    }
+  }
+  return( AT_CMPL );
+}
+
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_MMT                  |
+| STATE   : code                  ROUTINE : tAT_PlusCOPS             |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the +COPS=? AT command
+            which is responsible to test for all available network
+            operators.
+
+            <startIdx>: Start index for reading the list.
+                        Must be zero.
+            <lastIdx> : Last index buffers the last read index of the list.
+                        Not used, maintained for compatibility reasons.
+            <operLst> : List buffer to copy MAX_OPER entries into.
+                        Not used, maintained for compatibility reasons.
+
+*/
+
+GLOBAL T_ACI_RETURN tAT_PlusCOPS  ( T_ACI_CMD_SRC srcId,
+                                    SHORT startIdx,
+                                    SHORT * lastIdx,
+                                    T_ACI_COPS_OPDESC * operLst)
+{
+  /* Implements Measure 29 */
+  return ( tAT_Plus_Percent_COPS( AT_CMD_COPS, srcId, startIdx,
+                                  lastIdx, operLst ) );
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_MMT                  |
+| STATE   : code                  ROUTINE : tAT_PercentNRG             |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the %NRG=?
+*/
+
+GLOBAL T_ACI_RETURN tAT_PercentNRG  ( T_ACI_CMD_SRC srcId, T_ACI_NRG *NRG_options)
+{
+  
+  TRACE_FUNCTION ("tAT_PercentNRG()");
+
+/*
+ *-------------------------------------------------------------------
+ * check command source
+ *-------------------------------------------------------------------
+ */
+  if(!cmh_IsVldCmdSrc (srcId))
+  {
+    return( AT_FAIL );
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * check entity status
+ *-------------------------------------------------------------------
+ */
+  if( mmEntStat.curCmd NEQ AT_CMD_NONE )
+  {
+    TRACE_EVENT("mmEntStat.curCmd NEQ AT_CMD_NONE");
+    return( AT_BUSY );
+  }
+/*
+ * The response depends upon the value of the PLMN Mode bit.
+ */
+
+  NRG_options->reg_mode = NRG_REG_NotPresent;
+  NRG_options->srv_mode = NRG_SRV_NotPresent;
+  NRG_options->opr_frmt = NRG_OPR_NotPresent;
+
+  NRG_options->srv_mode = (T_ACI_NRG_SRV)
+  	      (NRG_options->srv_mode | NRG_SRV_Full | NRG_SRV_Limited | NRG_SRV_NoSrv | NRG_SRV_SetRegModeOnly);
+  NRG_options->opr_frmt = (T_ACI_NRG_OPR)
+  	      (NRG_options->opr_frmt | NRG_OPR_Long | NRG_OPR_Short | NRG_OPR_Numeric);
+  NRG_options->reg_mode = (T_ACI_NRG_REG)(NRG_options->reg_mode | NRG_REG_Auto);
+  
+  if(cmhSIM_isplmnmodebit_set())
+  {
+    NRG_options->reg_mode = (T_ACI_NRG_REG)(NRG_options->reg_mode | NRG_REG_Manual | NRG_REG_Both);
+  }
+    
+  return(AT_CMPL);
+
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_MMT                  |
+| STATE   : code                  ROUTINE : tAT_PercentCOPS             |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the %COPS=? AT command
+            which is responsible to test for all available network
+            operators.
+
+            <startIdx>: start index for reading the list.
+            <lastIdx> : last index buffers the last read index of the
+                        list
+            <operLst> : list buffer to copy MAX_OPER entries into.
+*/
+
+GLOBAL T_ACI_RETURN tAT_PercentCOPS  ( T_ACI_CMD_SRC srcId,
+                                    SHORT startIdx,
+                                    SHORT * lastIdx,
+                                    T_ACI_COPS_OPDESC * operLst)
+{
+  /* Implements Measure 29 */
+  return ( tAT_Plus_Percent_COPS( AT_CMD_P_COPS, srcId, startIdx,
+                                  lastIdx, operLst ) );
+}
+
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_MMT                  |
+| STATE   : code                  ROUTINE : get_available_network_list|
++--------------------------------------------------------------------+
+
+  PURPOSE : This is common function for +COPS and %COPS test functions.
+*/
+
+LOCAL T_ACI_RETURN get_available_network_list  ( T_ACI_CMD_SRC srcId,
+                                                  T_ACI_AT_CMD cmd,
+                                                  SHORT startIdx,
+                                                  SHORT * lastIdx,
+                                                  T_ACI_COPS_OPDESC * operLst)
+{
+  T_ACI_RETURN   retCd;        /* holds return code */
+
+  TRACE_FUNCTION ("get_available_network_list()");
+
+/*
+ *-------------------------------------------------------------------
+ * process the start index parameter in case of a network search
+ *-------------------------------------------------------------------
+ */
+  if(!cmhSIM_isplmnmodebit_set())
+  {
+    ACI_ERR_DESC( ACI_ERR_CLASS_Cme, CME_ERR_OpNotAllow );
+    return( AT_FAIL );
+  }
+  
+  if( startIdx EQ 0 )
+  {
+    mmEntStat.curCmd  = cmd;
+    mmShrdPrm.owner = (T_OWN)srcId;	
+    mmEntStat.entOwn = srcId;
+
+#if defined (GPRS) AND defined (DTI) 
+    if( psaG_MM_CMD_NET_SRCH ( ) < 0 )  /* search for network */
+#else
+    if( psaMM_NetSrch () < 0 )  /* search for network */
+#endif
+    {
+      TRACE_EVENT( "FATAL RETURN psaMM_NetSrch in COPS" );
+      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Internal );
+      return( AT_FAIL );
+    }
+
+    retCd = AT_EXCT;
+  }
+  else
+  {
+    /*
+     * For g23m, it makes no sense to support a startIdx different from zero
+     * as MM only delivers GMMREG_MAX_PLMN_ID PLMNs which is identical to
+     * MAX_PLMN_ID. So the MMI already gets all the desired information 
+     * by the callback rAT_PlusCOPS().
+     * For other programs like Neptune this maybe different, this is for
+     * further study.
+     */
+    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+    return( AT_FAIL );
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * log command execution
+ *-------------------------------------------------------------------
+ */
+#if defined SMI OR defined MFW OR defined FF_MMI_RIV
+  {
+  T_ACI_CLOG     cmdLog;       /* holds logging info */
+  cmdLog.atCmd                  = cmd;
+  cmdLog.cmdType                = CLOG_TYPE_Test;
+  cmdLog.retCode                = retCd;
+  cmdLog.cId                    = ACI_NumParmNotPresent;
+  cmdLog.sId                    = ACI_NumParmNotPresent;
+  cmdLog.cmdPrm.tCOPS.srcId     = srcId;
+  cmdLog.cmdPrm.tCOPS.startIdx  = startIdx;
+  cmdLog.cmdPrm.tCOPS.lastIdx   = lastIdx;
+  cmdLog.cmdPrm.tCOPS.operLst   = operLst;
+
+  rAT_PercentCLOG( &cmdLog );
+  }
+#endif
+  return( retCd );
+}
+
+/* Implements Measure 29 */
+/*
++------------------------------------------------------------------------------
+|  Function    : tAT_Plus_Percent_COPS
++------------------------------------------------------------------------------
+|  Description : This is the functional counterpart to the +COPS=? or %COPS=?
+|                AT command which is responsible to test for all available 
+|                network.
+|                Argument at_cmd_id will be used to pass AT_CMD_COPS or 
+|                AT_CMD_P_COPS in case of AT command +COPS=? or %COPS=?.
+|
+|
+|  Parameters  : at_cmd_id  - AT command identifier 
+|                srcId      - AT command source identifier
+|                startIdx   - start index for reading the list.
+|                lastIdx    - last index buffers the last read index of the
+|                             list
+|                operLst    - list buffer to copy MAX_OPER entries into.
+|
+|  Return      : ACI functional return codes 
++------------------------------------------------------------------------------
+*/
+
+LOCAL T_ACI_RETURN tAT_Plus_Percent_COPS  ( T_ACI_AT_CMD at_cmd_id,
+                                            T_ACI_CMD_SRC srcId,
+                                            SHORT startIdx,
+                                            SHORT * lastIdx,
+                                            T_ACI_COPS_OPDESC * operLst )
+{
+  TRACE_FUNCTION ( "tAT_Plus_Percent_COPS()" );
+
+  /*
+   *-------------------------------------------------------------------
+   * check command source
+   *-------------------------------------------------------------------
+   */
+  if(!cmh_IsVldCmdSrc (srcId))
+  {
+    return( AT_FAIL );
+  }
+
+  /*
+   *-------------------------------------------------------------------
+   * check entity status
+   *-------------------------------------------------------------------
+   */
+  if( mmEntStat.curCmd NEQ AT_CMD_NONE )
+  {
+    return( AT_BUSY );
+  }
+
+  /*
+   *-------------------------------------------------------------------
+   * process the start index parameter in case of a network search
+   *-------------------------------------------------------------------
+   */
+
+  return( get_available_network_list( srcId, at_cmd_id, startIdx,
+                                      lastIdx, operLst ) );
+
+}
+
+/*==== EOF ========================================================*/