FreeCalypso > hg > freecalypso-citrine

comparison g23m-aci/aci/cmh_t30s.c @ 0:75a11d740a02

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
initial import of gsm-fw from freecalypso-sw rev 1033:5ab737ac3ad7
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 09 Jun 2016 00:02:41 +0000
parents
children
comparison
equal deleted inserted replaced
-1:000000000000 0:75a11d740a02
1 /*
2 +-----------------------------------------------------------------------------
3 | Project : GSM-PS (6147)
4 | Modul : CMH_T30S
5 +-----------------------------------------------------------------------------
6 | Copyright 2002 Texas Instruments Berlin, AG
7 | All rights reserved.
8 |
9 | This file is confidential and a trade secret of Texas
10 | Instruments Berlin, AG
11 | The receipt of or possession of this file does not convey
12 | any rights to reproduce or disclose its contents or to
13 | manufacture, use, or sell anything it may describe, in
14 | whole, or in part, without the specific written consent of
15 | Texas Instruments Berlin, AG.
16 +-----------------------------------------------------------------------------
17 | Purpose : This module provides the set functions related to the
18 | protocol stack adapter for T30.
19 +-----------------------------------------------------------------------------
20 */
21
22 #if defined (DTI) || defined (FF_FAX)
23
24 #ifndef CMH_T30S_C
25 #define CMH_T30S_C
26 #endif
27
28 #include "aci_all.h"
29 /*==== INCLUDES ===================================================*/
30 #include "aci_cmh.h"
31 #include "ati_cmd.h"
32 #include "aci_cmd.h"
33 #include "dti.h" /* functionality of the dti library */
34
35 #include "dti_conn_mng.h"
36 #include "dti_cntrl_mng.h"
37
38 #include "aci_fd.h"
39 #include "aci_io.h"
40 #include "psa.h"
41 #include "psa_t30.h"
42 #include "psa_cc.h"
43 #include "cmh.h"
44 #include "cmh_t30.h"
45 #include "cmh_cc.h"
46
47
48 #include "cmh_ra.h"
49
50 #include "psa_uart.h"
51 #include "cmh_uart.h"
52 #ifdef FF_PSI
53 #include "psa_psi.h"
54 #include "cmh_psi.h"
55 #include "ati_src_psi.h"
56 #endif /*FF_PSI*/
57
58 /*==== CONSTANTS ==================================================*/
59
60 #define T30_DEF_THLD (90) /* good page threshold in percent */
61
62 #ifdef _SIMULATION_
63 #define T30_DEF_FRMPRIM (3) /* no. frames per primitive */
64 #else
65 #define T30_DEF_FRMPRIM (42) /* no. frames per primitive */
66 #endif
67
68 /*==== EXPORT =====================================================*/
69
70 /* remove after testing ??? */
71 /* EXTERN void TST_getSimData(UBYTE *data, USHORT nomLen,
72 USHORT *actLen, UBYTE *final); */
73
74 /*==== VARIABLES ==================================================*/
75
76 /*==== FUNCTIONS ==================================================*/
77
78 /*
79 +--------------------------------------------------------------------+
80 | PROJECT : GSM-PS (6147) MODULE : CMH_T30S |
81 | STATE : code ROUTINE : sAT_PlusFCLASS |
82 +--------------------------------------------------------------------+
83
84 PURPOSE : This is the functional counterpart to the +FCLASS AT
85 command which is responsible to set the class mode.
86
87 <class_type>: class mode.
88 */
89
90 GLOBAL T_ACI_RETURN sAT_PlusFCLASS ( T_ACI_CMD_SRC srcId,
91 T_ACI_FCLASS_CLASS class_type )
92 {
93 T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */
94
95 TRACE_FUNCTION ("sAT_PlusFCLASS()");
96
97 /*
98 *-------------------------------------------------------------------
99 * check command source
100 *-------------------------------------------------------------------
101 */
102 if(!cmh_IsVldCmdSrc (srcId))
103 {
104 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
105 return( AT_FAIL );
106 }
107
108 pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm;
109
110 /*
111 *-------------------------------------------------------------------
112 * stop FIT timer
113 *-------------------------------------------------------------------
114 */
115 cmhT30_StopFIT();
116
117 /*
118 *-------------------------------------------------------------------
119 * process the class_type parameter
120 *-------------------------------------------------------------------
121 */
122 switch( class_type )
123 {
124 case( FCLASS_CLASS_NotPresent ):
125 break;
126
127 case( FCLASS_CLASS_Voice ):
128 case( FCLASS_CLASS_Data ):
129 case( FCLASS_CLASS_Fax20 ):
130 pT30CmdPrm -> FCLASSclass = class_type;
131 break;
132
133 case( FCLASS_CLASS_Fax2 ): /* not implemented */
134 default:
135
136 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
137 return( AT_FAIL );
138 }
139
140 /*
141 *-------------------------------------------------------------------
142 * start FIT timer
143 *-------------------------------------------------------------------
144 */
145 cmhT30_StartFIT();
146
147 return( AT_CMPL );
148 }
149
150 /*
151 +--------------------------------------------------------------------+
152 | PROJECT : GSM-PS (6147) MODULE : CMH_T30S |
153 | STATE : code ROUTINE : sAT_PlusFCR |
154 +--------------------------------------------------------------------+
155
156 PURPOSE : This is the functional counterpart to the +FCR AT
157 command which is responsible to set the receive
158 capability.
159
160 <value>: receive capability.
161 */
162
163 GLOBAL T_ACI_RETURN sAT_PlusFCR ( T_ACI_CMD_SRC srcId,
164 T_ACI_FCR_VAL value )
165 {
166 T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */
167
168 TRACE_FUNCTION ("sAT_PlusFCR()");
169
170 /*
171 *-------------------------------------------------------------------
172 * check command source
173 *-------------------------------------------------------------------
174 */
175 if(!cmh_IsVldCmdSrc (srcId))
176 {
177 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
178 return( AT_FAIL );
179 }
180
181 pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm;
182
183 /*
184 *-------------------------------------------------------------------
185 * stop FIT timer
186 *-------------------------------------------------------------------
187 */
188 cmhT30_StopFIT();
189
190 /*
191 *-------------------------------------------------------------------
192 * process the value parameter
193 *-------------------------------------------------------------------
194 */
195 switch( value )
196 {
197 case( FCR_VAL_NotPresent ):
198 break;
199
200 case( FCR_VAL_NoRcvCap ):
201 case( FCR_VAL_RcvCap ):
202 pT30CmdPrm -> FCRval = value;
203 break;
204
205 default:
206
207 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
208 return( AT_FAIL );
209 }
210
211 /*
212 *-------------------------------------------------------------------
213 * start FIT timer
214 *-------------------------------------------------------------------
215 */
216 cmhT30_StartFIT();
217
218 return( AT_CMPL );
219 }
220
221 /*
222 +--------------------------------------------------------------------+
223 | PROJECT : GSM-PS (6147) MODULE : CMH_T30S |
224 | STATE : code ROUTINE : sAT_PlusFLI |
225 +--------------------------------------------------------------------+
226
227 PURPOSE : This is the functional counterpart to the +FLI AT
228 command which is responsible to set the local id string
229 (CSI/TSI).
230
231 <idStr>: local id string(0 terminated).
232 */
233
234 GLOBAL T_ACI_RETURN sAT_PlusFLI ( T_ACI_CMD_SRC srcId,
235 CHAR * idStr )
236 {
237 T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */
238
239 TRACE_FUNCTION ("sAT_PlusFLI()");
240
241 /*
242 *-------------------------------------------------------------------
243 * check command source
244 *-------------------------------------------------------------------
245 */
246 if(!cmh_IsVldCmdSrc (srcId))
247 {
248 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
249 return( AT_FAIL );
250 }
251
252 pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm;
253
254 /*
255 *-------------------------------------------------------------------
256 * stop FIT timer
257 *-------------------------------------------------------------------
258 */
259 cmhT30_StopFIT();
260
261 /*
262 *-------------------------------------------------------------------
263 * process the idStr parameter
264 *-------------------------------------------------------------------
265 */
266 if( ! idStr )
267 {
268 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
269 return( AT_FAIL );
270 }
271
272 strncpy( pT30CmdPrm -> FLIstr, idStr, MAX_ID_CHAR-1 );
273 pT30CmdPrm -> FLIstr[MAX_ID_CHAR-1] = 0;
274
275 /*
276 *-------------------------------------------------------------------
277 * start FIT timer
278 *-------------------------------------------------------------------
279 */
280 cmhT30_StartFIT();
281
282 return( AT_CMPL );
283 }
284
285 /*
286 +--------------------------------------------------------------------+
287 | PROJECT : GSM-PS (6147) MODULE : CMH_T30S |
288 | STATE : code ROUTINE : sAT_PlusFPI |
289 +--------------------------------------------------------------------+
290
291 PURPOSE : This is the functional counterpart to the +FPI AT
292 command which is responsible to set the local id string
293 (CGI).
294
295 <idStr>: local id string(0 terminated).
296 */
297
298 GLOBAL T_ACI_RETURN sAT_PlusFPI ( T_ACI_CMD_SRC srcId,
299 CHAR * idStr )
300 {
301 T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */
302
303 TRACE_FUNCTION ("sAT_PlusFPI()");
304
305 /*
306 *-------------------------------------------------------------------
307 * check command source
308 *-------------------------------------------------------------------
309 */
310 if(!cmh_IsVldCmdSrc (srcId))
311 {
312 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
313 return( AT_FAIL );
314 }
315
316 pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm;
317
318 /*
319 *-------------------------------------------------------------------
320 * stop FIT timer
321 *-------------------------------------------------------------------
322 */
323 cmhT30_StopFIT();
324
325 /*
326 *-------------------------------------------------------------------
327 * process the idStr parameter
328 *-------------------------------------------------------------------
329 */
330 if( ! idStr )
331 {
332 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
333 return( AT_FAIL );
334 }
335
336 strncpy( pT30CmdPrm -> FPIstr, idStr, MAX_ID_CHAR-1 );
337 pT30CmdPrm -> FPIstr[MAX_ID_CHAR-1] = 0;
338
339 /*
340 *-------------------------------------------------------------------
341 * start FIT timer
342 *-------------------------------------------------------------------
343 */
344 cmhT30_StartFIT();
345
346 return( AT_CMPL );
347 }
348
349 /*
350 +--------------------------------------------------------------------+
351 | PROJECT : GSM-PS (6147) MODULE : CMH_T30S |
352 | STATE : code ROUTINE : sAT_PlusFSA |
353 +--------------------------------------------------------------------+
354
355 PURPOSE : This is the functional counterpart to the +FSA AT
356 command which is responsible to set the destination
357 subaddress string
358
359 <subStr>: destination subaddress string(0 terminated).
360 */
361
362 GLOBAL T_ACI_RETURN sAT_PlusFSA ( T_ACI_CMD_SRC srcId,
363 CHAR * subStr )
364 {
365 T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */
366
367 TRACE_FUNCTION ("sAT_PlusFSA()");
368
369 /*
370 *-------------------------------------------------------------------
371 * check command source
372 *-------------------------------------------------------------------
373 */
374 if(!cmh_IsVldCmdSrc (srcId))
375 {
376 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
377 return( AT_FAIL );
378 }
379
380 pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm;
381
382 /*
383 *-------------------------------------------------------------------
384 * stop FIT timer
385 *-------------------------------------------------------------------
386 */
387 cmhT30_StopFIT();
388
389 /*
390 *-------------------------------------------------------------------
391 * process the idStr parameter
392 *-------------------------------------------------------------------
393 */
394 if( ! subStr )
395 {
396 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
397 return( AT_FAIL );
398 }
399
400 strncpy( pT30CmdPrm -> FSAsub, subStr, MAX_ID_CHAR-1 );
401 pT30CmdPrm -> FSAsub[MAX_ID_CHAR-1] = 0;
402
403 /*
404 *-------------------------------------------------------------------
405 * start FIT timer
406 *-------------------------------------------------------------------
407 */
408 cmhT30_StartFIT();
409
410 return( AT_CMPL );
411 }
412
413 /*
414 +--------------------------------------------------------------------+
415 | PROJECT : GSM-PS (6147) MODULE : CMH_T30S |
416 | STATE : code ROUTINE : sAT_PlusFPA |
417 +--------------------------------------------------------------------+
418
419 PURPOSE : This is the functional counterpart to the +FPA AT
420 command which is responsible to set the selective polling
421 address string.
422
423 <sepStr>: selective polling address string(0 terminated).
424 */
425
426 GLOBAL T_ACI_RETURN sAT_PlusFPA ( T_ACI_CMD_SRC srcId,
427 CHAR * sepStr )
428 {
429 T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */
430
431 TRACE_FUNCTION ("sAT_PlusFPA()");
432
433 /*
434 *-------------------------------------------------------------------
435 * check command source
436 *-------------------------------------------------------------------
437 */
438 if(!cmh_IsVldCmdSrc (srcId))
439 {
440 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
441 return( AT_FAIL );
442 }
443
444 pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm;
445
446 /*
447 *-------------------------------------------------------------------
448 * stop FIT timer
449 *-------------------------------------------------------------------
450 */
451 cmhT30_StopFIT();
452
453 /*
454 *-------------------------------------------------------------------
455 * process the idStr parameter
456 *-------------------------------------------------------------------
457 */
458 if( ! sepStr )
459 {
460 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
461 return( AT_FAIL );
462 }
463
464 strncpy( pT30CmdPrm -> FPAsep, sepStr, MAX_ID_CHAR-1 );
465 pT30CmdPrm -> FPAsep[MAX_ID_CHAR-1] = 0;
466
467 /*
468 *-------------------------------------------------------------------
469 * start FIT timer
470 *-------------------------------------------------------------------
471 */
472 cmhT30_StartFIT();
473
474 return( AT_CMPL );
475 }
476
477 /*
478 +--------------------------------------------------------------------+
479 | PROJECT : GSM-PS (6147) MODULE : CMH_T30S |
480 | STATE : code ROUTINE : sAT_PlusFPW |
481 +--------------------------------------------------------------------+
482
483 PURPOSE : This is the functional counterpart to the +FPW AT
484 command which is responsible to set the password string.
485
486 <pwdStr>: password string(0 terminated).
487 */
488
489 GLOBAL T_ACI_RETURN sAT_PlusFPW ( T_ACI_CMD_SRC srcId,
490 CHAR * pwdStr )
491 {
492 T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */
493
494 TRACE_FUNCTION ("sAT_PlusFPW()");
495
496 /*
497 *-------------------------------------------------------------------
498 * check command source
499 *-------------------------------------------------------------------
500 */
501 if(!cmh_IsVldCmdSrc (srcId))
502 {
503 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
504 return( AT_FAIL );
505 }
506
507 pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm;
508
509 /*
510 *-------------------------------------------------------------------
511 * stop FIT timer
512 *-------------------------------------------------------------------
513 */
514 cmhT30_StopFIT();
515
516 /*
517 *-------------------------------------------------------------------
518 * process the idStr parameter
519 *-------------------------------------------------------------------
520 */
521 if( ! pwdStr )
522 {
523 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
524 return( AT_FAIL );
525 }
526
527 strncpy( pT30CmdPrm -> FPWpwd, pwdStr, MAX_ID_CHAR-1 );
528 pT30CmdPrm -> FPWpwd[MAX_ID_CHAR-1] = 0;
529
530 /*
531 *-------------------------------------------------------------------
532 * start FIT timer
533 *-------------------------------------------------------------------
534 */
535 cmhT30_StartFIT();
536
537 return( AT_CMPL );
538 }
539
540 /*
541 +--------------------------------------------------------------------+
542 | PROJECT : GSM-PS (6147) MODULE : CMH_T30S |
543 | STATE : code ROUTINE : sAT_PlusFCC |
544 +--------------------------------------------------------------------+
545
546 PURPOSE : This is the functional counterpart to the +FCC AT
547 command which is responsible to set the DCE capabilities.
548
549 <vr>: resolution.
550 <br>: bit rate.
551 <wd>: page width.
552 <ln>: page length.
553 <df>: data compression.
554 <ec>: error correction.
555 <bt>: file transer.
556 <st>: scan time.
557 <jp>: JPEG mode.
558 */
559
560 GLOBAL T_ACI_RETURN sAT_PlusFCC ( T_ACI_CMD_SRC srcId, T_ACI_F_VR vr,
561 T_ACI_F_BR br, T_ACI_F_WD wd,
562 T_ACI_F_LN ln, T_ACI_F_DF df,
563 T_ACI_F_EC ec, T_ACI_F_BF bf,
564 T_ACI_F_ST st, T_ACI_F_JP jp )
565 {
566 T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */
567
568 TRACE_FUNCTION ("sAT_PlusFCC()");
569
570 /*
571 *-------------------------------------------------------------------
572 * check command source
573 *-------------------------------------------------------------------
574 */
575 if(!cmh_IsVldCmdSrc (srcId))
576 {
577 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
578 return( AT_FAIL );
579 }
580
581 pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm;
582
583 /*
584 *-------------------------------------------------------------------
585 * stop FIT timer
586 *-------------------------------------------------------------------
587 */
588 cmhT30_StopFIT();
589
590 /*
591 *-------------------------------------------------------------------
592 * process the vr parameter
593 *-------------------------------------------------------------------
594 */
595 switch (vr)
596 {
597 case F_VR_NotPresent:
598 vr = pT30CmdPrm -> FCCvr;
599 break;
600
601 case F_VR_R8X3_85:
602 case F_VR_R8X7_7:
603 case F_VR_R8X15_4:
604 case F_VR_R16X15_4:
605 case F_VR_200X100:
606 case F_VR_200X200:
607 case F_VR_200X400:
608 case F_VR_300X300:
609 break;
610
611 default:
612 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
613 return AT_FAIL;
614 }
615
616 /*
617 *-------------------------------------------------------------------
618 * process the br parameter
619 *-------------------------------------------------------------------
620 */
621 switch( br )
622 {
623 case( F_BR_NotPresent ):
624
625 br = pT30CmdPrm -> FCCbr;
626 break;
627
628 case( F_BR_2400 ):
629 case( F_BR_4800 ):
630 case( F_BR_7200 ):
631 case( F_BR_9600 ):
632 case( F_BR_12000 ):
633 case( F_BR_14400 ):
634
635 break;
636
637 default:
638
639 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
640 return( AT_FAIL );
641 }
642
643 /*
644 *-------------------------------------------------------------------
645 * process the wd parameter
646 *-------------------------------------------------------------------
647 */
648 switch( wd )
649 {
650 case( F_WD_NotPresent ):
651
652 wd = pT30CmdPrm -> FCCwd;
653 break;
654
655 case( F_WD_1728 ):
656 case( F_WD_2048 ):
657 case( F_WD_2432 ):
658 case( F_WD_1216 ):
659 case( F_WD_864 ):
660
661 break;
662
663 default:
664
665 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
666 return( AT_FAIL );
667 }
668
669 /*
670 *-------------------------------------------------------------------
671 * process the ln parameter
672 *-------------------------------------------------------------------
673 */
674 switch( ln )
675 {
676 case( F_LN_NotPresent ):
677
678 ln = pT30CmdPrm -> FCCln;
679 break;
680
681 case( F_LN_A4 ):
682 case( F_LN_B4 ):
683 case( F_LN_Unlimited ):
684
685 break;
686
687 default:
688
689 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
690 return( AT_FAIL );
691 }
692
693 /*
694 *-------------------------------------------------------------------
695 * process the df parameter
696 *-------------------------------------------------------------------
697 */
698 switch( df )
699 {
700 case( F_DF_NotPresent ):
701
702 df = pT30CmdPrm -> FCCdf;
703 break;
704
705 case( F_DF_1D_MdfHuff ):
706
707 break;
708
709 case( F_DF_2D_MdfRd_T4 ): /* not implemented */
710 case( F_DF_2D_Uncomp ): /* not implemented */
711 case( F_DF_2D_MdfRd_T6 ): /* not implemented */
712 default:
713
714 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
715 return( AT_FAIL );
716 }
717
718 /*
719 *-------------------------------------------------------------------
720 * process the ec parameter
721 *-------------------------------------------------------------------
722 */
723 switch( ec )
724 {
725 case( F_EC_NotPresent ):
726
727 ec = pT30CmdPrm -> FCCec;
728 break;
729
730 case( F_EC_DisableECM ):
731
732 break;
733
734 case( F_EC_EnableECM ): /* not implemented */
735 case( F_EC_EnableHalfDup ): /* not implemented */
736 case( F_EC_EnableFullDup ): /* not implemented */
737 default:
738
739 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
740 return( AT_FAIL );
741 }
742
743 /*
744 *-------------------------------------------------------------------
745 * process the bf parameter
746 *-------------------------------------------------------------------
747 */
748 if( bf NEQ F_BF_NotPresent )
749 {
750 if( bf > F_BF_DisableFileTrnsf ) /* others are not implemented */
751 {
752 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
753 return( AT_FAIL );
754 }
755 }
756 else
757
758 bf = pT30CmdPrm -> FCCbf;
759
760 /*
761 *-------------------------------------------------------------------
762 * process the st parameter
763 *-------------------------------------------------------------------
764 */
765 switch( st )
766 {
767 case( F_ST_NotPresent ):
768
769 st = pT30CmdPrm -> FCCst;
770 break;
771
772 case( F_ST_0_0 ):
773 case( F_ST_5_5 ):
774 case( F_ST_10_5 ):
775 case( F_ST_10_10 ):
776 case( F_ST_20_10 ):
777 case( F_ST_20_20 ):
778 case( F_ST_40_20 ):
779 case( F_ST_40_40 ):
780
781 break;
782
783 default:
784
785 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
786 return( AT_FAIL );
787 }
788
789 /*
790 *-------------------------------------------------------------------
791 * process the jp parameter
792 *-------------------------------------------------------------------
793 */
794 if( jp NEQ F_JP_NotPresent )
795 {
796 if( jp > F_JP_DisableJPEG ) /* others are not implemented */
797 {
798 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
799 return( AT_FAIL );
800 }
801 }
802 else
803
804 jp = pT30CmdPrm -> FCCjp;
805
806
807 /*
808 *-------------------------------------------------------------------
809 * assign the parameters
810 *-------------------------------------------------------------------
811 */
812 pT30CmdPrm -> FCCvr = pT30CmdPrm -> FISvr = vr;
813 pT30CmdPrm -> FCCbr = pT30CmdPrm -> FISbr = br;
814 pT30CmdPrm -> FCCwd = pT30CmdPrm -> FISwd = wd;
815 pT30CmdPrm -> FCCln = pT30CmdPrm -> FISln = ln;
816 pT30CmdPrm -> FCCdf = pT30CmdPrm -> FISdf = df;
817 pT30CmdPrm -> FCCec = pT30CmdPrm -> FISec = ec;
818 pT30CmdPrm -> FCCbf = pT30CmdPrm -> FISbf = bf;
819 pT30CmdPrm -> FCCst = pT30CmdPrm -> FISst = st;
820 pT30CmdPrm -> FCCjp = pT30CmdPrm -> FISjp = jp;
821
822
823 /*
824 *-------------------------------------------------------------------
825 * start FIT timer
826 *-------------------------------------------------------------------
827 */
828 cmhT30_StartFIT();
829
830 return( AT_CMPL );
831 }
832
833 /*
834 +--------------------------------------------------------------------+
835 | PROJECT : GSM-PS (6147) MODULE : CMH_T30S |
836 | STATE : code ROUTINE : sAT_PlusFIS |
837 +--------------------------------------------------------------------+
838
839 PURPOSE : This is the functional counterpart to the +FIS AT
840 command which is responsible to set the current session
841 capabilities.
842
843 <vr>: resolution.
844 <br>: bit rate.
845 <wd>: page width.
846 <ln>: page length.
847 <df>: data compression.
848 <ec>: error correction.
849 <bt>: file transer.
850 <st>: scan time.
851 <jp>: JPEG mode.
852 */
853
854 GLOBAL T_ACI_RETURN sAT_PlusFIS ( T_ACI_CMD_SRC srcId, T_ACI_F_VR vr,
855 T_ACI_F_BR br, T_ACI_F_WD wd,
856 T_ACI_F_LN ln, T_ACI_F_DF df,
857 T_ACI_F_EC ec, T_ACI_F_BF bf,
858 T_ACI_F_ST st, T_ACI_F_JP jp )
859 {
860 T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */
861
862 TRACE_FUNCTION ("sAT_PlusFIS()");
863
864 /*
865 *-------------------------------------------------------------------
866 * check command source
867 *-------------------------------------------------------------------
868 */
869 if(!cmh_IsVldCmdSrc (srcId))
870 {
871 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
872 return( AT_FAIL );
873 }
874
875 pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm;
876
877 /*
878 *-------------------------------------------------------------------
879 * stop FIT timer
880 *-------------------------------------------------------------------
881 */
882 cmhT30_StopFIT();
883
884 /*
885 *-------------------------------------------------------------------
886 * process the vr parameter
887 *-------------------------------------------------------------------
888 */
889 switch (vr)
890 {
891 case F_VR_NotPresent:
892 vr = pT30CmdPrm -> FISvr;
893 break;
894
895 case F_VR_R8X3_85:
896 case F_VR_R8X7_7:
897 case F_VR_R8X15_4:
898 case F_VR_R16X15_4:
899 case F_VR_200X100:
900 case F_VR_200X200:
901 case F_VR_200X400:
902 case F_VR_300X300:
903 break;
904
905 default:
906 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
907 return AT_FAIL;
908 }
909
910 /*
911 *-------------------------------------------------------------------
912 * process the br parameter
913 *-------------------------------------------------------------------
914 */
915 switch( br )
916 {
917 case( F_BR_NotPresent ):
918
919 br = pT30CmdPrm -> FISbr;
920 break;
921
922 case( F_BR_2400 ):
923 case( F_BR_4800 ):
924 case( F_BR_7200 ):
925 case( F_BR_9600 ):
926 case( F_BR_12000 ):
927 case( F_BR_14400 ):
928
929 break;
930
931 default:
932
933 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
934 return( AT_FAIL );
935 }
936
937 /*
938 *-------------------------------------------------------------------
939 * process the wd parameter
940 *-------------------------------------------------------------------
941 */
942 switch( wd )
943 {
944 case( F_WD_NotPresent ):
945
946 wd = pT30CmdPrm -> FISwd;
947 break;
948
949 case( F_WD_1728 ):
950 case( F_WD_2048 ):
951 case( F_WD_2432 ):
952 case( F_WD_1216 ):
953 case( F_WD_864 ):
954
955 break;
956
957 default:
958
959 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
960 return( AT_FAIL );
961 }
962
963 /*
964 *-------------------------------------------------------------------
965 * process the ln parameter
966 *-------------------------------------------------------------------
967 */
968 switch( ln )
969 {
970 case( F_LN_NotPresent ):
971
972 ln = pT30CmdPrm -> FISln;
973 break;
974
975 case( F_LN_A4 ):
976 case( F_LN_B4 ):
977 case( F_LN_Unlimited ):
978
979 break;
980
981 default:
982
983 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
984 return( AT_FAIL );
985 }
986
987 /*
988 *-------------------------------------------------------------------
989 * process the df parameter
990 *-------------------------------------------------------------------
991 */
992 switch( df )
993 {
994 case( F_DF_NotPresent ):
995
996 df = pT30CmdPrm -> FISdf;
997 break;
998
999 case( F_DF_1D_MdfHuff ):
1000
1001 break;
1002
1003 case( F_DF_2D_MdfRd_T4 ): /* not implemented */
1004 case( F_DF_2D_Uncomp ): /* not implemented */
1005 case( F_DF_2D_MdfRd_T6 ): /* not implemented */
1006 default:
1007
1008 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
1009 return( AT_FAIL );
1010 }
1011
1012 /*
1013 *-------------------------------------------------------------------
1014 * process the ec parameter
1015 *-------------------------------------------------------------------
1016 */
1017 switch( ec )
1018 {
1019 case( F_EC_NotPresent ):
1020
1021 ec = pT30CmdPrm -> FISec;
1022 break;
1023
1024 case( F_EC_DisableECM ):
1025
1026 break;
1027
1028 case( F_EC_EnableECM ): /* not implemented */
1029 case( F_EC_EnableHalfDup ): /* not implemented */
1030 case( F_EC_EnableFullDup ): /* not implemented */
1031 default:
1032
1033 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
1034 return( AT_FAIL );
1035 }
1036
1037 /*
1038 *-------------------------------------------------------------------
1039 * process the bf parameter
1040 *-------------------------------------------------------------------
1041 */
1042 if( bf NEQ F_BF_NotPresent )
1043 {
1044 if( bf > F_BF_DisableFileTrnsf ) /* others are not implemented */
1045 {
1046 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
1047 return( AT_FAIL );
1048 }
1049 }
1050 else
1051
1052 bf = pT30CmdPrm -> FISbf;
1053
1054 /*
1055 *-------------------------------------------------------------------
1056 * process the st parameter
1057 *-------------------------------------------------------------------
1058 */
1059 switch( st )
1060 {
1061 case( F_ST_NotPresent ):
1062
1063 st = pT30CmdPrm -> FISst;
1064 break;
1065
1066 case( F_ST_0_0 ):
1067 case( F_ST_5_5 ):
1068 case( F_ST_10_5 ):
1069 case( F_ST_10_10 ):
1070 case( F_ST_20_10 ):
1071 case( F_ST_20_20 ):
1072 case( F_ST_40_20 ):
1073 case( F_ST_40_40 ):
1074
1075 break;
1076
1077 default:
1078
1079 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
1080 return( AT_FAIL );
1081 }
1082
1083 /*
1084 *-------------------------------------------------------------------
1085 * process the jp parameter
1086 *-------------------------------------------------------------------
1087 */
1088 if( jp NEQ F_JP_NotPresent )
1089 {
1090 if( jp > F_JP_DisableJPEG ) /* others are not implemented */
1091 {
1092 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
1093 return( AT_FAIL );
1094 }
1095 }
1096 else
1097
1098 jp = pT30CmdPrm -> FISjp;
1099
1100 /*
1101 *-------------------------------------------------------------------
1102 * assign the parameters
1103 *-------------------------------------------------------------------
1104 */
1105 pT30CmdPrm -> FISvr = vr;
1106 pT30CmdPrm -> FISbr = br;
1107 pT30CmdPrm -> FISwd = wd;
1108 pT30CmdPrm -> FISln = ln;
1109 pT30CmdPrm -> FISdf = df;
1110 pT30CmdPrm -> FISec = ec;
1111 pT30CmdPrm -> FISbf = bf;
1112 pT30CmdPrm -> FISst = st;
1113 pT30CmdPrm -> FISjp = jp;
1114
1115 /*
1116 *-------------------------------------------------------------------
1117 * start FIT timer
1118 *-------------------------------------------------------------------
1119 */
1120 cmhT30_StartFIT();
1121
1122 return( AT_CMPL );
1123 }
1124
1125 /*
1126 +--------------------------------------------------------------------+
1127 | PROJECT : GSM-PS (6147) MODULE : CMH_T30S |
1128 | STATE : code ROUTINE : sAT_PlusFNS |
1129 +--------------------------------------------------------------------+
1130
1131 PURPOSE : This is the functional counterpart to the +FNS AT
1132 command which is responsible to set the string for
1133 non-standard facilities.
1134
1135 <len>: length of nsf string.
1136 <nsf>: nsf octed string.
1137 */
1138
1139 GLOBAL T_ACI_RETURN sAT_PlusFNS ( T_ACI_CMD_SRC srcId,
1140 UBYTE len,
1141 UBYTE * nsf )
1142 {
1143 T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */
1144
1145 TRACE_FUNCTION ("sAT_PlusFNS()");
1146
1147 /*
1148 *-------------------------------------------------------------------
1149 * check command source
1150 *-------------------------------------------------------------------
1151 */
1152 if(!cmh_IsVldCmdSrc (srcId))
1153 {
1154 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
1155 return( AT_FAIL );
1156 }
1157
1158 pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm;
1159
1160 /*
1161 *-------------------------------------------------------------------
1162 * stop FIT timer
1163 *-------------------------------------------------------------------
1164 */
1165 cmhT30_StopFIT();
1166
1167 /*
1168 *-------------------------------------------------------------------
1169 * process the len and nsf parameter
1170 *-------------------------------------------------------------------
1171 */
1172 if((len > 0 AND ! nsf) OR len > MAX_NSF_BYTE )
1173 {
1174 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
1175 return( AT_FAIL );
1176 }
1177
1178 if( len EQ 0 )
1179 {
1180 pT30CmdPrm -> FNSlen = 0;
1181 }
1182 else
1183 {
1184 if (MINIMUM(MAX_NSF_BYTE - pT30CmdPrm -> FNSlen, len))
1185 {
1186 memcpy( &pT30CmdPrm -> FNSoct[pT30CmdPrm -> FNSlen], nsf,
1187 MINIMUM(MAX_NSF_BYTE - pT30CmdPrm -> FNSlen, len) );
1188 }
1189
1190 pT30CmdPrm -> FNSlen +=
1191 MINIMUM(MAX_NSF_BYTE - pT30CmdPrm -> FNSlen, len);
1192 }
1193
1194 /*
1195 *-------------------------------------------------------------------
1196 * start FIT timer
1197 *-------------------------------------------------------------------
1198 */
1199 cmhT30_StartFIT();
1200
1201 return( AT_CMPL );
1202 }
1203
1204 /*
1205 +--------------------------------------------------------------------+
1206 | PROJECT : GSM-PS (6147) MODULE : CMH_T30S |
1207 | STATE : code ROUTINE : sAT_PlusFLP |
1208 +--------------------------------------------------------------------+
1209
1210 PURPOSE : This is the functional counterpart to the +FLP AT
1211 command which is responsible to indicate a document for
1212 polling.
1213
1214 <value>: polling indication.
1215 */
1216
1217 GLOBAL T_ACI_RETURN sAT_PlusFLP (T_ACI_CMD_SRC srcId,
1218 T_ACI_FLP_VAL value )
1219 {
1220 T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */
1221
1222 TRACE_FUNCTION ("sAT_PlusFLP()");
1223
1224 /*
1225 *-------------------------------------------------------------------
1226 * check command source
1227 *-------------------------------------------------------------------
1228 */
1229 if(!cmh_IsVldCmdSrc (srcId))
1230 {
1231 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
1232 return( AT_FAIL );
1233 }
1234
1235 pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm;
1236
1237 /*
1238 *-------------------------------------------------------------------
1239 * stop FIT timer
1240 *-------------------------------------------------------------------
1241 */
1242 cmhT30_StopFIT();
1243
1244 /*
1245 *-------------------------------------------------------------------
1246 * process the value parameter
1247 *-------------------------------------------------------------------
1248 */
1249 switch( value )
1250 {
1251 case( FLP_VAL_NotPresent ):
1252
1253 break;
1254
1255 case( FLP_VAL_NoPollDoc ):
1256 case( FLP_VAL_PollDoc ):
1257
1258 pT30CmdPrm -> FLPval = value;
1259 break;
1260
1261 default:
1262
1263 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
1264 return( AT_FAIL );
1265 }
1266
1267 /*
1268 *-------------------------------------------------------------------
1269 * start FIT timer
1270 *-------------------------------------------------------------------
1271 */
1272 cmhT30_StartFIT();
1273
1274 return( AT_CMPL );
1275 }
1276
1277 /*
1278 +--------------------------------------------------------------------+
1279 | PROJECT : GSM-PS (6147) MODULE : CMH_T30S |
1280 | STATE : code ROUTINE : sAT_PlusFIE |
1281 +--------------------------------------------------------------------+
1282
1283 PURPOSE : This is the functional counterpart to the +FIE AT
1284 command which is responsible to enable procedure interrupts.
1285
1286 <value>: PI mode.
1287 */
1288
1289 GLOBAL T_ACI_RETURN sAT_PlusFIE (T_ACI_CMD_SRC srcId,
1290 T_ACI_FIE_VAL value )
1291 {
1292 T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */
1293
1294 TRACE_FUNCTION ("sAT_PlusFIE()");
1295
1296 /*
1297 *-------------------------------------------------------------------
1298 * check command source
1299 *-------------------------------------------------------------------
1300 */
1301 if(!cmh_IsVldCmdSrc (srcId))
1302 {
1303 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
1304 return( AT_FAIL );
1305 }
1306
1307 pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm;
1308
1309 /*
1310 *-------------------------------------------------------------------
1311 * stop FIT timer
1312 *-------------------------------------------------------------------
1313 */
1314 cmhT30_StopFIT();
1315
1316 /*
1317 *-------------------------------------------------------------------
1318 * process the value parameter
1319 *-------------------------------------------------------------------
1320 */
1321 switch( value )
1322 {
1323 case( FIE_VAL_NotPresent ):
1324
1325 break;
1326
1327 case( FIE_VAL_IgnorePRI ):
1328 case( FIE_VAL_AcceptPRI ):
1329
1330 pT30CmdPrm -> FIEval = value;
1331 break;
1332
1333 default:
1334
1335 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
1336 return( AT_FAIL );
1337 }
1338
1339 /*
1340 *-------------------------------------------------------------------
1341 * start FIT timer
1342 *-------------------------------------------------------------------
1343 */
1344 cmhT30_StartFIT();
1345
1346 return( AT_CMPL );
1347 }
1348
1349 /*
1350 +--------------------------------------------------------------------+
1351 | PROJECT : GSM-PS (6147) MODULE : CMH_T30S |
1352 | STATE : code ROUTINE : sAT_PlusFCQ |
1353 +--------------------------------------------------------------------+
1354
1355 PURPOSE : This is the functional counterpart to the +FCQ AT
1356 command which is responsible to set the copy quality
1357 checking.
1358
1359 <rq>: receive quality.
1360 <tq>: transmit quality.
1361 */
1362
1363 GLOBAL T_ACI_RETURN sAT_PlusFCQ (T_ACI_CMD_SRC srcId,
1364 T_ACI_FCQ_RQ rq,
1365 T_ACI_FCQ_TQ tq )
1366 {
1367 T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */
1368
1369 TRACE_FUNCTION ("sAT_PlusFCQ()");
1370
1371 /*
1372 *-------------------------------------------------------------------
1373 * check command source
1374 *-------------------------------------------------------------------
1375 */
1376 if(!cmh_IsVldCmdSrc (srcId))
1377 {
1378 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
1379 return( AT_FAIL );
1380 }
1381
1382 pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm;
1383
1384 /*
1385 *-------------------------------------------------------------------
1386 * stop FIT timer
1387 *-------------------------------------------------------------------
1388 */
1389 cmhT30_StopFIT();
1390
1391 /*
1392 *-------------------------------------------------------------------
1393 * process the rq parameter
1394 *-------------------------------------------------------------------
1395 */
1396 switch( rq )
1397 {
1398 case( FCQ_RQ_NotPresent ):
1399
1400 rq = pT30CmdPrm -> FCQrq;
1401 break;
1402
1403 case( FCQ_RQ_CQCDisabled ):
1404 case( FCQ_RQ_CQCEnabled ):
1405
1406 break;
1407
1408 case( FCQ_RQ_CQCandCorrection ):
1409 default:
1410
1411 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
1412 return( AT_FAIL );
1413 }
1414
1415 /*
1416 *-------------------------------------------------------------------
1417 * process the tq parameter
1418 *-------------------------------------------------------------------
1419 */
1420 switch( tq )
1421 {
1422 case( FCQ_TQ_NotPresent ):
1423 case( FCQ_TQ_CQCDisabled ):
1424
1425 break;
1426
1427 case( FCQ_TQ_CQCEnabled ):
1428 case( FCQ_TQ_CQCandCorrection ):
1429 default:
1430
1431 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
1432 return( AT_FAIL );
1433 }
1434
1435 /*
1436 *-------------------------------------------------------------------
1437 * assign the parameters
1438 *-------------------------------------------------------------------
1439 */
1440 pT30CmdPrm -> FCQrq = rq;
1441
1442 /*
1443 *-------------------------------------------------------------------
1444 * start FIT timer
1445 *-------------------------------------------------------------------
1446 */
1447 cmhT30_StartFIT();
1448
1449 return( AT_CMPL );
1450 }
1451
1452 /*
1453 +--------------------------------------------------------------------+
1454 | PROJECT : GSM-PS (6147) MODULE : CMH_T30S |
1455 | STATE : code ROUTINE : sAT_PlusFIT |
1456 +--------------------------------------------------------------------+
1457
1458 PURPOSE : This is the functional counterpart to the +FIT AT
1459 command which is responsible to set the inactivity timeout.
1460
1461 <time>: inactivity timeout.
1462 <act> : action.
1463 */
1464
1465 GLOBAL T_ACI_RETURN sAT_PlusFIT (T_ACI_CMD_SRC srcId,
1466 SHORT time,
1467 T_ACI_FIT_ACT act )
1468 {
1469 T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */
1470
1471 TRACE_FUNCTION ("sAT_PlusFIT()");
1472
1473 /*
1474 *-------------------------------------------------------------------
1475 * check command source
1476 *-------------------------------------------------------------------
1477 */
1478 if(!cmh_IsVldCmdSrc (srcId))
1479 {
1480 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
1481 return( AT_FAIL );
1482 }
1483
1484 pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm;
1485
1486 /*
1487 *-------------------------------------------------------------------
1488 * stop FIT timer
1489 *-------------------------------------------------------------------
1490 */
1491 cmhT30_StopFIT();
1492
1493 /*
1494 *-------------------------------------------------------------------
1495 * process the act parameter
1496 *-------------------------------------------------------------------
1497 */
1498 switch( act )
1499 {
1500 case( FIT_ACT_NotPresent ):
1501
1502 act = pT30CmdPrm -> FITact;
1503 break;
1504
1505 case( FIT_ACT_OnHookRst ):
1506 case( FIT_ACT_OnHook ):
1507
1508 break;
1509
1510 default:
1511
1512 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
1513 return( AT_FAIL );
1514 }
1515
1516 /*
1517 *-------------------------------------------------------------------
1518 * process the time parameter
1519 *-------------------------------------------------------------------
1520 */
1521 if( time > 255 )
1522 {
1523 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
1524 return( AT_FAIL );
1525 }
1526
1527 /*
1528 *-------------------------------------------------------------------
1529 * assign the parameters
1530 *-------------------------------------------------------------------
1531 */
1532 pT30CmdPrm -> FITact = act;
1533
1534 if( time NEQ ACI_NumParmNotPresent )
1535 {
1536 pT30CmdPrm -> FITtime = time * 1000;
1537 }
1538
1539 /*
1540 *-------------------------------------------------------------------
1541 * start FIT timer
1542 *-------------------------------------------------------------------
1543 */
1544 cmhT30_StartFIT();
1545
1546 return( AT_CMPL );
1547 }
1548
1549 /*
1550 +--------------------------------------------------------------------+
1551 | PROJECT : GSM-PS (6147) MODULE : CMH_T30S |
1552 | STATE : code ROUTINE : sAT_PlusFBO |
1553 +--------------------------------------------------------------------+
1554
1555 PURPOSE : This is the functional counterpart to the +FBO AT
1556 command which is responsible to set data bit order.
1557
1558 <value>: data bit order.
1559 */
1560
1561 GLOBAL T_ACI_RETURN sAT_PlusFBO (T_ACI_CMD_SRC srcId,
1562 T_ACI_FBO_VAL value )
1563 {
1564 T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */
1565
1566 TRACE_FUNCTION ("sAT_PlusFBO()");
1567
1568 /*
1569 *-------------------------------------------------------------------
1570 * check command source
1571 *-------------------------------------------------------------------
1572 */
1573 if(!cmh_IsVldCmdSrc (srcId))
1574 {
1575 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
1576 return( AT_FAIL );
1577 }
1578
1579 pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm;
1580
1581 /*
1582 *-------------------------------------------------------------------
1583 * stop FIT timer
1584 *-------------------------------------------------------------------
1585 */
1586 cmhT30_StopFIT();
1587
1588 /*
1589 *-------------------------------------------------------------------
1590 * process the value parameter
1591 *-------------------------------------------------------------------
1592 */
1593 switch( value )
1594 {
1595 case( FBO_VAL_NotPresent ):
1596
1597 value = pT30CmdPrm -> FBOval;
1598 break;
1599
1600 case( FBO_VAL_DirCDirBD ):
1601 case( FBO_VAL_RvrCDirBD ):
1602 case( FBO_VAL_DirCRvrBD ):
1603 case( FBO_VAL_RvrCRvrBD ):
1604
1605 break;
1606
1607 default:
1608
1609 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
1610 return( AT_FAIL );
1611 }
1612
1613 /*
1614 *-------------------------------------------------------------------
1615 * assign the parameters
1616 *-------------------------------------------------------------------
1617 */
1618 pT30CmdPrm -> FBOval = value;
1619
1620 /*
1621 *-------------------------------------------------------------------
1622 * start FIT timer
1623 *-------------------------------------------------------------------
1624 */
1625 cmhT30_StartFIT();
1626
1627 return( AT_CMPL );
1628 }
1629
1630 /*
1631 +--------------------------------------------------------------------+
1632 | PROJECT : GSM-PS (6147) MODULE : CMH_T30S |
1633 | STATE : code ROUTINE : sAT_PlusFRQ |
1634 +--------------------------------------------------------------------+
1635
1636 PURPOSE : This is the functional counterpart to the +FRQ AT
1637 command which is responsible to set the receive quality
1638 thresholds.
1639
1640 <pgl>: percentage of good lines.
1641 <cbl>: consecutive bad lines.
1642 */
1643
1644 GLOBAL T_ACI_RETURN sAT_PlusFRQ (T_ACI_CMD_SRC srcId,
1645 SHORT pgl,
1646 SHORT cbl )
1647 {
1648 TRACE_FUNCTION ("sAT_PlusFRQ()");
1649
1650 /* process the pgl parameter */
1651 if( pgl NEQ 0 )
1652 {
1653 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
1654 return( AT_FAIL );
1655 }
1656
1657 /* process the cbl parameter */
1658 if( cbl NEQ 0 )
1659 {
1660 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
1661 return( AT_FAIL );
1662 }
1663
1664 /* start FIT timer */
1665 cmhT30_StartFIT();
1666
1667 return( AT_CMPL );
1668 }
1669
1670 /*
1671 +--------------------------------------------------------------------+
1672 | PROJECT : GSM-PS (6147) MODULE : CMH_T30S |
1673 | STATE : code ROUTINE : sAT_PlusFEA |
1674 +--------------------------------------------------------------------+
1675
1676 PURPOSE : This is the functional counterpart to the +FEA AT
1677 command which is responsible to set phase C EOL alignment.
1678
1679 <value>: alignment.
1680 */
1681
1682 GLOBAL T_ACI_RETURN sAT_PlusFEA (T_ACI_CMD_SRC srcId,
1683 SHORT value )
1684 {
1685
1686 TRACE_FUNCTION ("sAT_PlusFEA()");
1687
1688 /*
1689 *-------------------------------------------------------------------
1690 * process the value parameter
1691 *-------------------------------------------------------------------
1692 */
1693 if( value NEQ ACI_NumParmNotPresent )
1694 {
1695 if( value NEQ 0 )
1696 {
1697 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
1698 return( AT_FAIL );
1699 }
1700 }
1701
1702 /*
1703 *-------------------------------------------------------------------
1704 * start FIT timer
1705 *-------------------------------------------------------------------
1706 */
1707 cmhT30_StartFIT();
1708
1709 return( AT_CMPL );
1710 }
1711
1712 /*
1713 +--------------------------------------------------------------------+
1714 | PROJECT : GSM-PS (6147) MODULE : CMH_T30S |
1715 | STATE : code ROUTINE : sAT_PlusFCT |
1716 +--------------------------------------------------------------------+
1717
1718 PURPOSE : This is the functional counterpart to the +FCT AT
1719 command which is responsible to set phase C response
1720 timeout.
1721
1722 <value>: timeout.
1723 */
1724
1725 GLOBAL T_ACI_RETURN sAT_PlusFCT (T_ACI_CMD_SRC srcId,
1726 SHORT value )
1727 {
1728
1729 TRACE_FUNCTION ("sAT_PlusFCT()");
1730
1731 /*
1732 *-------------------------------------------------------------------
1733 * process the value parameter
1734 *-------------------------------------------------------------------
1735 */
1736 if( value NEQ ACI_NumParmNotPresent )
1737 {
1738 if( value NEQ 30 )
1739 {
1740 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
1741 return( AT_FAIL );
1742 }
1743 }
1744
1745 /*
1746 *-------------------------------------------------------------------
1747 * start FIT timer
1748 *-------------------------------------------------------------------
1749 */
1750 cmhT30_StartFIT();
1751
1752 return( AT_CMPL );
1753 }
1754
1755 /*
1756 +--------------------------------------------------------------------+
1757 | PROJECT : GSM-PS (6147) MODULE : CMH_T30S |
1758 | STATE : code ROUTINE : sAT_PlusFMS |
1759 +--------------------------------------------------------------------+
1760
1761 PURPOSE : This is the functional counterpart to the +FMS AT
1762 command which is responsible to set the minimum phase C
1763 speed.
1764
1765 <br>: minimum phase C baud rate.
1766 */
1767
1768 GLOBAL T_ACI_RETURN sAT_PlusFMS (T_ACI_CMD_SRC srcId,
1769 T_ACI_F_BR br)
1770 {
1771 T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */
1772
1773 TRACE_FUNCTION ("sAT_PlusFMS()");
1774
1775 /*
1776 *-------------------------------------------------------------------
1777 * check command source
1778 *-------------------------------------------------------------------
1779 */
1780 if(!cmh_IsVldCmdSrc (srcId))
1781 {
1782 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
1783 return( AT_FAIL );
1784 }
1785
1786 pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm;
1787
1788 /*
1789 *-------------------------------------------------------------------
1790 * stop FIT timer
1791 *-------------------------------------------------------------------
1792 */
1793 cmhT30_StopFIT();
1794
1795 /*
1796 *-------------------------------------------------------------------
1797 * process the br parameter
1798 *-------------------------------------------------------------------
1799 */
1800 switch( br )
1801 {
1802 case( F_BR_NotPresent ):
1803
1804 break;
1805
1806 case( F_BR_2400 ):
1807 case( F_BR_4800 ):
1808 case( F_BR_7200 ):
1809 case( F_BR_9600 ):
1810 case( F_BR_12000 ):
1811 case( F_BR_14400 ):
1812
1813 pT30CmdPrm -> FMSbr = br;
1814 break;
1815
1816 default:
1817
1818 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
1819 return( AT_FAIL );
1820 }
1821
1822 /*
1823 *-------------------------------------------------------------------
1824 * start FIT timer
1825 *-------------------------------------------------------------------
1826 */
1827 cmhT30_StartFIT();
1828
1829 return( AT_CMPL );
1830 }
1831
1832 /*
1833 +--------------------------------------------------------------------+
1834 | PROJECT : GSM-PS (6147) MODULE : CMH_T30S |
1835 | STATE : code ROUTINE : sAT_PlusFFC |
1836 +--------------------------------------------------------------------+
1837
1838 PURPOSE : This is the functional counterpart to the +FFC AT
1839 command which is responsible to set the format conversion
1840 parameters.
1841
1842 <vrc>: vertical resolution format.
1843 <dfc>: data format.
1844 <lnc>: page length format.
1845 <wdc>: page width format.
1846 */
1847
1848 GLOBAL T_ACI_RETURN sAT_PlusFFC (T_ACI_CMD_SRC srcId,
1849 T_ACI_FFC_VRC vrc,
1850 T_ACI_FFC_DFC dfc,
1851 T_ACI_FFC_LNC lnc,
1852 T_ACI_FFC_WDC wdc)
1853 {
1854
1855 TRACE_FUNCTION ("sAT_PlusFFC()");
1856
1857 /*
1858 *-------------------------------------------------------------------
1859 * process the vrc parameter
1860 *-------------------------------------------------------------------
1861 */
1862 if( vrc NEQ FFC_VRC_NotPresent )
1863 {
1864 if( vrc NEQ FFC_VRC_Ignored )
1865 {
1866 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
1867 return( AT_FAIL );
1868 }
1869 }
1870
1871 /*
1872 *-------------------------------------------------------------------
1873 * process the dfc parameter
1874 *-------------------------------------------------------------------
1875 */
1876 if( dfc NEQ FFC_DFC_NotPresent )
1877 {
1878 if( dfc NEQ FFC_DFC_Ignored )
1879 {
1880 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
1881 return( AT_FAIL );
1882 }
1883 }
1884
1885 /*
1886 *-------------------------------------------------------------------
1887 * process the lnc parameter
1888 *-------------------------------------------------------------------
1889 */
1890 if( lnc NEQ FFC_LNC_NotPresent )
1891 {
1892 if( lnc NEQ FFC_LNC_Ignored )
1893 {
1894 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
1895 return( AT_FAIL );
1896 }
1897 }
1898
1899 /*
1900 *-------------------------------------------------------------------
1901 * process the wdc parameter
1902 *-------------------------------------------------------------------
1903 */
1904 if( wdc NEQ FFC_WDC_NotPresent )
1905 {
1906 if( wdc NEQ FFC_WDC_Ignored )
1907 {
1908 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
1909 return( AT_FAIL );
1910 }
1911 }
1912
1913 /*
1914 *-------------------------------------------------------------------
1915 * start FIT timer
1916 *-------------------------------------------------------------------
1917 */
1918 cmhT30_StartFIT();
1919
1920 return( AT_CMPL );
1921 }
1922
1923 /*
1924 +--------------------------------------------------------------------+
1925 | PROJECT : GSM-PS (6147) MODULE : CMH_T30S |
1926 | STATE : code ROUTINE : sAT_PlusFIP |
1927 +--------------------------------------------------------------------+
1928
1929 PURPOSE : This is the functional counterpart to the +FIP AT
1930 command which is responsible to reset the FAX parameter to
1931 their initial value.
1932
1933 */
1934
1935 GLOBAL T_ACI_RETURN sAT_PlusFIP (T_ACI_CMD_SRC srcId)
1936 {
1937
1938 TRACE_FUNCTION ("sAT_PlusFIP()");
1939
1940 /*
1941 *-------------------------------------------------------------------
1942 * check command source and reset parameters
1943 *-------------------------------------------------------------------
1944 */
1945 if(!cmh_IsVldCmdSrc (srcId))
1946 {
1947 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
1948 return( AT_FAIL );
1949 }
1950
1951 cmhT30_StopFIT();
1952
1953 cmhT30_InitFAXPrms( srcId );
1954
1955 cmhT30_RstNgtPrms();
1956
1957 /*
1958 *-------------------------------------------------------------------
1959 * start FIT timer
1960 *-------------------------------------------------------------------
1961 */
1962 cmhT30_StartFIT();
1963
1964 return( AT_CMPL );
1965 }
1966
1967 /*
1968 +--------------------------------------------------------------------+
1969 | PROJECT : GSM-PS (6147) MODULE : CMH_T30S |
1970 | STATE : code ROUTINE : sAT_PlusFPS |
1971 +--------------------------------------------------------------------+
1972
1973 PURPOSE : This is the functional counterpart to the +FPS AT command
1974 which is responsible to set the post page response.
1975
1976 <ppr>: post page response.
1977 */
1978
1979 GLOBAL T_ACI_RETURN sAT_PlusFPS (T_ACI_CMD_SRC srcId,
1980 T_ACI_FPS_PPR ppr )
1981 {
1982 T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */
1983
1984 TRACE_FUNCTION ("sAT_PlusFPS()");
1985
1986 /*
1987 *-------------------------------------------------------------------
1988 * check command source
1989 *-------------------------------------------------------------------
1990 */
1991 if(!cmh_IsVldCmdSrc (srcId))
1992 {
1993 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
1994 return( AT_FAIL );
1995 }
1996
1997 pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm;
1998
1999 /*
2000 *-------------------------------------------------------------------
2001 * stop FIT timer
2002 *-------------------------------------------------------------------
2003 */
2004 cmhT30_StopFIT();
2005
2006 /*
2007 *-------------------------------------------------------------------
2008 * process the ppr parameter
2009 *-------------------------------------------------------------------
2010 */
2011 switch( ppr )
2012 {
2013 case( FPS_PPR_NotPresent ):
2014 break;
2015
2016 case( FPS_PPR_Mcf ):
2017 case( FPS_PPR_Rtn ):
2018 case( FPS_PPR_Rtp ):
2019 case( FPS_PPR_Pip ):
2020 case( FPS_PPR_Pin ):
2021
2022 pT30CmdPrm -> FPSppr = ppr;
2023 break;
2024
2025 default:
2026
2027 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
2028 return( AT_FAIL );
2029 }
2030
2031 /*
2032 *-------------------------------------------------------------------
2033 * start FIT timer
2034 *-------------------------------------------------------------------
2035 */
2036 cmhT30_StartFIT();
2037
2038 return( AT_CMPL );
2039 }
2040
2041 /*
2042 +--------------------------------------------------------------------+
2043 | PROJECT : GSM-PS (6147) MODULE : CMH_T30S |
2044 | STATE : code ROUTINE : sAT_PlusFSP |
2045 +--------------------------------------------------------------------+
2046
2047 PURPOSE : This is the functional counterpart to the +FSP AT command
2048 which is responsible to set the possibility of polling.
2049
2050 <value>: polling mode.
2051 */
2052
2053 GLOBAL T_ACI_RETURN sAT_PlusFSP (T_ACI_CMD_SRC srcId,
2054 T_ACI_FSP_VAL value )
2055 {
2056 T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */
2057
2058 TRACE_FUNCTION ("sAT_PlusFSP()");
2059
2060 /*
2061 *-------------------------------------------------------------------
2062 * check command source
2063 *-------------------------------------------------------------------
2064 */
2065 if(!cmh_IsVldCmdSrc (srcId))
2066 {
2067 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
2068 return( AT_FAIL );
2069 }
2070
2071 pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm;
2072
2073 /*
2074 *-------------------------------------------------------------------
2075 * stop FIT timer
2076 *-------------------------------------------------------------------
2077 */
2078 cmhT30_StopFIT();
2079
2080 /*
2081 *-------------------------------------------------------------------
2082 * process the value parameter
2083 *-------------------------------------------------------------------
2084 */
2085 switch( value )
2086 {
2087 case( FSP_VAL_NotPresent ):
2088 break;
2089
2090 case( FSP_VAL_PollDisabled ):
2091 case( FSP_VAL_PollEnable ):
2092
2093 pT30CmdPrm -> FSPval = value;
2094 break;
2095
2096 default:
2097
2098 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
2099 return( AT_FAIL );
2100 }
2101
2102 /*
2103 *-------------------------------------------------------------------
2104 * start FIT timer
2105 *-------------------------------------------------------------------
2106 */
2107 cmhT30_StartFIT();
2108
2109 return( AT_CMPL );
2110 }
2111
2112 /*
2113 +--------------------------------------------------------------------+
2114 | PROJECT : GSM-PS (6147) MODULE : CMH_T30S |
2115 | STATE : code ROUTINE : sAT_PlusFAP |
2116 +--------------------------------------------------------------------+
2117
2118 PURPOSE : This is the functional counterpart to the +FAP AT
2119 command which is responsible to set the address and
2120 polling capabilities.
2121
2122 <sub>: destination subaddressing.
2123 <sep>: selective polling.
2124 <pwd>: password.
2125 */
2126
2127 GLOBAL T_ACI_RETURN sAT_PlusFAP (T_ACI_CMD_SRC srcId,
2128 T_ACI_FAP_VAL sub,
2129 T_ACI_FAP_VAL sep,
2130 T_ACI_FAP_VAL pwd )
2131 {
2132 T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */
2133
2134 TRACE_FUNCTION ("sAT_PlusFAP()");
2135
2136 /*
2137 *-------------------------------------------------------------------
2138 * check command source
2139 *-------------------------------------------------------------------
2140 */
2141 if(!cmh_IsVldCmdSrc (srcId))
2142 {
2143 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
2144 return( AT_FAIL );
2145 }
2146
2147 pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm;
2148
2149 /*
2150 *-------------------------------------------------------------------
2151 * stop FIT timer
2152 *-------------------------------------------------------------------
2153 */
2154 cmhT30_StopFIT();
2155
2156 /*
2157 *-------------------------------------------------------------------
2158 * process the sub parameter
2159 *-------------------------------------------------------------------
2160 */
2161 switch( sub )
2162 {
2163 case( FAP_VAL_NotPresent ):
2164
2165 sub = pT30CmdPrm -> FAPsub;
2166 break;
2167
2168 case( FAP_VAL_Disabled ):
2169 case( FAP_VAL_Enabled ):
2170
2171 break;
2172
2173 default:
2174
2175 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
2176 return( AT_FAIL );
2177 }
2178
2179 /*
2180 *-------------------------------------------------------------------
2181 * process the sub parameter
2182 *-------------------------------------------------------------------
2183 */
2184 switch( sep )
2185 {
2186 case( FAP_VAL_NotPresent ):
2187
2188 sep = pT30CmdPrm -> FAPsep;
2189 break;
2190
2191 case( FAP_VAL_Disabled ):
2192 case( FAP_VAL_Enabled ):
2193
2194 break;
2195
2196 default:
2197
2198 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
2199 return( AT_FAIL );
2200 }
2201
2202 /*
2203 *-------------------------------------------------------------------
2204 * process the sub parameter
2205 *-------------------------------------------------------------------
2206 */
2207 switch( pwd )
2208 {
2209 case( FAP_VAL_NotPresent ):
2210
2211 pwd = pT30CmdPrm -> FAPpwd;
2212 break;
2213
2214 case( FAP_VAL_Disabled ):
2215 case( FAP_VAL_Enabled ):
2216
2217 break;
2218
2219 default:
2220
2221 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
2222 return( AT_FAIL );
2223 }
2224
2225 /*
2226 *-------------------------------------------------------------------
2227 * assign the parameters
2228 *-------------------------------------------------------------------
2229 */
2230 pT30CmdPrm -> FAPsub = sub;
2231 pT30CmdPrm -> FAPsep = sep;
2232 pT30CmdPrm -> FAPpwd = pwd;
2233
2234 /*
2235 *-------------------------------------------------------------------
2236 * start FIT timer
2237 *-------------------------------------------------------------------
2238 */
2239 cmhT30_StartFIT();
2240
2241 return( AT_CMPL );
2242 }
2243
2244
2245 /*
2246 +--------------------------------------------------------------------+
2247 | PROJECT : GSM-PS (6147) MODULE : CMH_T30S |
2248 | STATE : code ROUTINE : sAT_PlusFDT |
2249 +--------------------------------------------------------------------+
2250
2251 PURPOSE : This is the functional counterpart to the +FDT AT
2252 command which is responsible to transmit FAX data.
2253
2254 */
2255
2256 GLOBAL T_ACI_RETURN sAT_PlusFDT (T_ACI_CMD_SRC srcId)
2257 {
2258
2259 TRACE_FUNCTION ("sAT_PlusFDT()");
2260
2261 /*
2262 *-------------------------------------------------------------------
2263 * check command source
2264 *-------------------------------------------------------------------
2265 */
2266 if(!cmh_IsVldCmdSrc (srcId) OR
2267 !psaCC_ctbIsValid (t30ShrdPrm.cId) OR
2268 (t30ShrdPrm.faxStat NEQ FS_IDL AND t30ShrdPrm.faxStat NEQ FS_SND_DOC))
2269 {
2270 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
2271 return( AT_FAIL );
2272 }
2273
2274 /*
2275 *-------------------------------------------------------------------
2276 * stop FIT timer
2277 *-------------------------------------------------------------------
2278 */
2279 cmhT30_StopFIT();
2280
2281 /*
2282 *-------------------------------------------------------------------
2283 * check entity status
2284 *-------------------------------------------------------------------
2285 */
2286 if( t30EntStat.curCmd NEQ AT_CMD_NONE )
2287
2288 return( AT_BUSY );
2289
2290 t30EntStat.curCmd = AT_CMD_FDT;
2291 t30EntStat.entOwn = srcId;
2292
2293 /*
2294 *-------------------------------------------------------------------
2295 * negotiate transmission parameters and send DCS
2296 *-------------------------------------------------------------------
2297 */
2298 if( t30ShrdPrm.faxStat EQ FS_IDL OR
2299 t30ShrdPrm.faxStat EQ FS_DOC_TRF )
2300 {
2301 cmhT30_NgtDCEPrms( srcId );
2302
2303 /* check for minimum speed condition */
2304 if( t30NgtPrms.FCSbr < fnd_cmhPrm[srcId].t30CmdPrm.FMSbr )
2305 {
2306 TRACE_EVENT("DISCONNECT CALL DUE TO FALL BELOW MINIMUM SPEED CONDITION");
2307 t30ShrdPrm.faxStat = FS_IDL;
2308 t30EntStat.curCmd = AT_CMD_NONE;
2309 ccShrdPrm.datStat = DS_DSC_REQ;
2310 cmhT30_Deactivate ();
2311 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_FaxMinSpeedCond );
2312 return( AT_FAIL );
2313 }
2314 cmhT30_SendCaps ( srcId, FRT_DCS );
2315 }
2316
2317 /*
2318 *-------------------------------------------------------------------
2319 * check for connect message
2320 *-------------------------------------------------------------------
2321 */
2322 if( t30ShrdPrm.faxStat EQ FS_IDL OR t30ShrdPrm.faxStat EQ FS_DOC_TRF )
2323 {
2324 R_AT( RAT_FCS, t30EntStat.entOwn )
2325 ( t30NgtPrms.FCSvr,
2326 t30NgtPrms.FCSbr,
2327 t30NgtPrms.FCSwd,
2328 t30NgtPrms.FCSln,
2329 t30NgtPrms.FCSdf,
2330 t30NgtPrms.FCSec,
2331 t30NgtPrms.FCSbf,
2332 t30NgtPrms.FCSst,
2333 t30NgtPrms.FCSjp);
2334 }
2335 t30ShrdPrm.faxStat = FS_SND_DOC;
2336 pageSentFlg = FALSE;
2337 ppmPendFlg = FALSE;
2338 cmhT30_StartFIT();
2339 TRACE_EVENT ("START DTE->DCE FAX DATA PHASE");
2340 /*
2341 R_AT( RAT_CONNECT, t30EntStat.entOwn )
2342 ( t30EntStat.curCmd, cmhT30_GetDataRate(), t30ShrdPrm.cId+1, FALSE );
2343 */
2344 return( AT_EXCT );
2345 }
2346
2347 /*
2348 +--------------------------------------------------------------------+
2349 | PROJECT : GSM-PS (6147) MODULE : CMH_T30S |
2350 | STATE : code ROUTINE : sAT_PlusFDR |
2351 +--------------------------------------------------------------------+
2352
2353 PURPOSE : This is the functional counterpart to the +FDR AT
2354 command which is responsible to receive FAX data.
2355
2356 */
2357
2358 GLOBAL T_ACI_RETURN sAT_PlusFDR (T_ACI_CMD_SRC srcId)
2359 {
2360 TRACE_FUNCTION ("sAT_PlusFDR()");
2361 /*
2362 *-------------------------------------------------------------------
2363 * check command source
2364 *-------------------------------------------------------------------
2365 */
2366 if(!cmh_IsVldCmdSrc (srcId) OR
2367 !psaCC_ctbIsValid (t30ShrdPrm.cId) OR
2368 fnd_cmhPrm[srcId].t30CmdPrm.FCRval EQ FCR_VAL_NoRcvCap OR
2369 (t30ShrdPrm.faxStat NEQ FS_IDL AND t30ShrdPrm.faxStat NEQ FS_RCV_DOC))
2370 {
2371 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
2372 return( AT_FAIL );
2373 }
2374 cmhT30_StopFIT();
2375
2376 /*
2377 *-------------------------------------------------------------------
2378 * check entity status
2379 *-------------------------------------------------------------------
2380 */
2381 if( t30EntStat.curCmd NEQ AT_CMD_NONE )
2382 return( AT_BUSY );
2383
2384 t30EntStat.curCmd = AT_CMD_FDR;
2385 t30EntStat.entOwn = srcId;
2386
2387 /*
2388 *-------------------------------------------------------------------
2389 * check to send a DTC frame
2390 *-------------------------------------------------------------------
2391 */
2392 if( DTCSentFlg EQ FALSE AND
2393 (t30ShrdPrm.faxStat EQ FS_IDL OR
2394 t30ShrdPrm.faxStat EQ FS_DOC_TRF) AND
2395 psaCC_ctb(t30ShrdPrm.cId)->calType EQ CT_MOC AND
2396 fnd_cmhPrm[t30EntStat.entOwn].t30CmdPrm.FSPval EQ FSP_VAL_PollEnable )
2397 {
2398 DTCSentFlg = TRUE;
2399 cmhT30_SendCaps ( srcId, FRT_DTC );
2400 }
2401
2402 /*
2403 *-------------------------------------------------------------------
2404 * check to send a post page response
2405 *-------------------------------------------------------------------
2406 */
2407 else if (t30ShrdPrm.faxStat EQ FS_RCV_DOC OR t30ShrdPrm.faxStat EQ FS_DOC_TRF)
2408 {
2409 t30ShrdPrm.sgn_snd = cmhT30_GetPpr(fnd_cmhPrm[srcId].t30CmdPrm.FPSppr);
2410 if( psaT30_Ppm( ) < 0 ) /* send ppm */
2411 {
2412 TRACE_EVENT( "FATAL RETURN psaT30 in sAT_PlusFDR" );
2413 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Internal );
2414 return( AT_FAIL );
2415 }
2416 }
2417
2418 /*
2419 *-------------------------------------------------------------------
2420 * check for connect message
2421 *-------------------------------------------------------------------
2422 */
2423 t30ShrdPrm.faxStat = FS_RCV_DOC;
2424 return( AT_EXCT );
2425 }
2426
2427 /*
2428 +--------------------------------------------------------------------+
2429 | PROJECT : GSM-PS (6147) MODULE : CMH_T30S |
2430 | STATE : code ROUTINE : sAT_PlusFKS |
2431 +--------------------------------------------------------------------+
2432
2433 PURPOSE : This is the functional counterpart to the +FKS AT
2434 command which is responsible to terminate a FAX session.
2435
2436 */
2437
2438 GLOBAL T_ACI_RETURN sAT_PlusFKS (T_ACI_CMD_SRC srcId)
2439 {
2440 TRACE_FUNCTION ("sAT_PlusFKS()");
2441
2442 /* check command source */
2443 if(!cmh_IsVldCmdSrc (srcId) )
2444 {
2445 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
2446 return( AT_FAIL );
2447 }
2448 cmhT30_StopFIT();
2449
2450 /* check entity status */
2451 if( t30EntStat.curCmd NEQ AT_CMD_NONE )
2452 return( AT_BUSY );
2453
2454 /* check for active call */
2455 if (!psaCC_ctbIsValid (t30ShrdPrm.cId))
2456 return( AT_CMPL );
2457
2458 t30EntStat.curCmd = AT_CMD_FKS;
2459 t30EntStat.entOwn = srcId;
2460
2461 /* disconnect T30 */
2462 psaT30_Disconnect( );
2463
2464 return( AT_EXCT );
2465 }
2466
2467 /*
2468 +-------------------------------------------------------------------+
2469 | PROJECT : GSM-PS (6147) MODULE : CMH_T30 |
2470 | ROUTINE : cmhT30_Activate |
2471 +-------------------------------------------------------------------+
2472
2473 PURPOSE : set all nescessary parameters and activate T30
2474
2475 */
2476
2477 GLOBAL T_ACI_RETURN cmhT30_Activate ( T_ACI_CMD_SRC srcId,
2478 T_ACI_AT_CMD cmdId,
2479 SHORT cId )
2480 {
2481 TRACE_FUNCTION ("cmhT30_Activate()");
2482
2483 /* check command source */
2484 if(!cmh_IsVldCmdSrc (srcId))
2485 return( AT_FAIL );
2486
2487 /* check entity status */
2488 if( t30EntStat.curCmd NEQ AT_CMD_NONE )
2489
2490 return( AT_BUSY );
2491
2492 /* fill in activate parameters */
2493 t30ShrdPrm.trans_rate = cmhT30_SelChnRate();
2494 if( t30ShrdPrm.trans_rate EQ NOT_PRESENT_16BIT )
2495 return( AT_FAIL );
2496
2497 t30ShrdPrm.bitord = cmhT30_SelBitOrder( srcId );
2498 if( t30ShrdPrm.bitord EQ NOT_PRESENT_8BIT )
2499 return( AT_FAIL );
2500
2501 t30ShrdPrm.half_rate = cmhT30_SelHlfRate();
2502 t30ShrdPrm.threshold = T30_DEF_THLD;
2503 t30ShrdPrm.frames_per_prim = T30_DEF_FRMPRIM;
2504 t30ShrdPrm.hdlc_report = TRUE;
2505 t30ShrdPrm.test_mode = 0; /* needed for simulation */
2506
2507 t30ShrdPrm.cId = cId;
2508 t30EntStat.curCmd = cmdId;
2509 t30EntStat.entOwn = srcId;
2510
2511 FHSstat = FHS_STAT_NormEnd; /* reset call termination status */
2512
2513 psaT30_Activate( );
2514 return( AT_EXCT );
2515 }
2516
2517 /*
2518 +-------------------------------------------------------------------+
2519 | PROJECT : GSM-PS (6147) MODULE : CMH_T30 |
2520 | ROUTINE : cmhT30_Deactivate |
2521 +-------------------------------------------------------------------+
2522
2523 PURPOSE : set all nescessary parameters and deactivate T30
2524
2525 */
2526
2527 GLOBAL T_ACI_RETURN cmhT30_Deactivate ( void )
2528 {
2529 UBYTE src_id = t30EntStat.entOwn;
2530 #ifdef FF_PSI
2531 T_ACI_DTI_PRC_PSI *src_infos = find_element (psi_src_params,
2532 src_id, cmhPSItest_srcId);
2533 #endif /*FF_PSI*/
2534 T_DTI_CNTRL info;
2535
2536 TRACE_FUNCTION ("cmht30_Deactivate()");
2537
2538
2539 if (dti_cntrl_get_info_from_src_id( src_id, &info) EQ FALSE)
2540 {
2541 TRACE_EVENT_P1("cannot find info for src_id=%d", src_id);
2542 return( AT_FAIL );
2543 }
2544
2545 if (dti_cntrl_is_dti_channel_connected(DTI_ENTITY_T30, info.dti_id))
2546 {
2547 T_DTI_ENTITY_ID entity_list[] = {DTI_ENTITY_ACI};
2548 #ifdef FF_PSI
2549 if (src_infos NEQ NULL)
2550 dti_cntrl_est_dpath_indirect ( src_id,
2551 entity_list,
2552 1,
2553 SPLIT,
2554 atiPSI_dti_cb,
2555 DTI_CPBLTY_CMD,
2556 DTI_CID_NOTPRESENT);
2557 else
2558 #endif
2559 dti_cntrl_est_dpath_indirect ( src_id,
2560 entity_list,
2561 1,
2562 SPLIT,
2563 atiUART_dti_cb,
2564 DTI_CPBLTY_CMD,
2565 DTI_CID_NOTPRESENT);
2566
2567 return( AT_EXCT );
2568 }
2569
2570 /* reset parameters to initial value */
2571 cmhT30_RstNgtPrms(); /* reset negotiation parameter */
2572
2573 /* deactivate */
2574 psaT30_Deactivate( );
2575 return( AT_EXCT );
2576 }
2577
2578 /*
2579 +-------------------------------------------------------------------+
2580 | PROJECT : GSM-PS (6147) MODULE : CMH_T30 |
2581 | ROUTINE : cmhT30_Modify |
2582 +-------------------------------------------------------------------+
2583
2584 PURPOSE : set all nescessary parameters and modify T30
2585
2586 */
2587
2588 GLOBAL T_ACI_RETURN cmhT30_Modify (void)
2589 {
2590 TRACE_FUNCTION ("cmhT30_Modify()");
2591
2592 /* fill in modify parameters */
2593 t30ShrdPrm.trans_rate = cmhT30_SelUsrRate();
2594 if (t30ShrdPrm.trans_rate EQ NOT_PRESENT_16BIT)
2595 {
2596 t30ShrdPrm.trans_rate = cmhT30_SelChnRate();
2597 }
2598 if (t30ShrdPrm.trans_rate EQ NOT_PRESENT_16BIT)
2599 return (AT_FAIL);
2600
2601 t30ShrdPrm.half_rate = cmhT30_SelHlfRate();
2602
2603 psaT30_Modify( );
2604 return( AT_EXCT );
2605 }
2606
2607 /*
2608 +-------------------------------------------------------------------+
2609 | PROJECT : GSM-PS (6147) MODULE : CMH_T30 |
2610 | ROUTINE : cmhT30_SendCaps |
2611 +-------------------------------------------------------------------+
2612
2613 PURPOSE : Send local DCE capability parameters
2614
2615 */
2616
2617 GLOBAL T_ACI_RETURN cmhT30_SendCaps ( T_ACI_CMD_SRC srcId,
2618 T_T30_FRTP frmTyp )
2619 {
2620 T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */
2621
2622 TRACE_FUNCTION ("cmhT30_SendCaps()");
2623
2624 /*
2625 *-------------------------------------------------------------------
2626 * check command source
2627 *-------------------------------------------------------------------
2628 */
2629 if(!cmh_IsVldCmdSrc (srcId))
2630
2631 return( AT_FAIL );
2632
2633 pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm;
2634
2635 /*
2636 *-------------------------------------------------------------------
2637 * build capability parameter
2638 *-------------------------------------------------------------------
2639 */
2640 t30ShrdPrm.hdlc_snd.crp = FALSE;
2641 cmhT30_BuildSndFrm( srcId, frmTyp );
2642
2643 switch( frmTyp )
2644 {
2645 /*
2646 *---------------------------------------------------------------
2647 * for a DIS frame
2648 *---------------------------------------------------------------
2649 */
2650 case( FRT_DIS ):
2651
2652 t30ShrdPrm.hdlc_snd.v_dcs = t30ShrdPrm.hdlc_snd.v_dtc = FALSE;
2653 t30ShrdPrm.hdlc_snd.c_nsc = t30ShrdPrm.hdlc_snd.c_nss = 0;
2654 t30ShrdPrm.hdlc_snd.c_tsi = t30ShrdPrm.hdlc_snd.c_cig = 0;
2655
2656 /* non-standard facility */
2657 t30ShrdPrm.hdlc_snd.c_nsf = pT30CmdPrm -> FNSlen;
2658
2659 if (pT30CmdPrm -> FNSlen)
2660 {
2661 memcpy( t30ShrdPrm.hdlc_snd.nsf, pT30CmdPrm -> FNSoct,
2662 pT30CmdPrm -> FNSlen);
2663 }
2664
2665 if( pT30CmdPrm -> FLIstr[0] NEQ 0 ) /* calling subscr. id */
2666 {
2667 t30ShrdPrm.hdlc_snd.c_csi = strlen( pT30CmdPrm -> FLIstr );
2668 strncpy( (char *) t30ShrdPrm.hdlc_snd.csi,
2669 (char *) pT30CmdPrm -> FLIstr,
2670 t30ShrdPrm.hdlc_snd.c_csi );
2671 }
2672 else
2673 {
2674 t30ShrdPrm.hdlc_snd.c_csi = 0;
2675 }
2676 break;
2677
2678 /*
2679 *---------------------------------------------------------------
2680 * for a DTC frame
2681 *---------------------------------------------------------------
2682 */
2683 case( FRT_DTC ):
2684
2685 t30ShrdPrm.hdlc_snd.v_dcs = t30ShrdPrm.hdlc_snd.v_dis = FALSE;
2686 t30ShrdPrm.hdlc_snd.c_nsf = t30ShrdPrm.hdlc_snd.c_nss = 0;
2687 t30ShrdPrm.hdlc_snd.c_tsi = t30ShrdPrm.hdlc_snd.c_csi = 0;
2688
2689 /* non-standard facility */
2690 t30ShrdPrm.hdlc_snd.c_nsc = pT30CmdPrm -> FNSlen;
2691
2692 if (pT30CmdPrm -> FNSlen)
2693 {
2694 memcpy( t30ShrdPrm.hdlc_snd.nsc, pT30CmdPrm -> FNSoct,
2695 pT30CmdPrm -> FNSlen);
2696 }
2697
2698 if( pT30CmdPrm -> FPWpwd[0] NEQ 0 ) /* password string */
2699 {
2700 t30ShrdPrm.hdlc_snd.c_pwd = strlen( pT30CmdPrm -> FPWpwd );
2701 strncpy( (char *) t30ShrdPrm.hdlc_snd.pwd,
2702 (char *) pT30CmdPrm -> FPWpwd,
2703 t30ShrdPrm.hdlc_snd.c_pwd );
2704 }
2705 else
2706 {
2707 t30ShrdPrm.hdlc_snd.c_pwd = 0;
2708 }
2709
2710 if( pT30CmdPrm -> FPAsep[0] NEQ 0 ) /* selective polling string */
2711 {
2712 t30ShrdPrm.hdlc_snd.c_sep = strlen( pT30CmdPrm -> FPAsep );
2713 strncpy( (char *) t30ShrdPrm.hdlc_snd.sep,
2714 (char *) pT30CmdPrm -> FPAsep,
2715 t30ShrdPrm.hdlc_snd.c_sep );
2716 }
2717 else
2718 {
2719 t30ShrdPrm.hdlc_snd.c_sep = 0;
2720 }
2721
2722 if( pT30CmdPrm -> FPIstr[0] NEQ 0 ) /* calling subscr. id */
2723 {
2724 t30ShrdPrm.hdlc_snd.c_cig = strlen( pT30CmdPrm -> FPIstr );
2725 strncpy( (char *) t30ShrdPrm.hdlc_snd.cig,
2726 (char *) pT30CmdPrm -> FPIstr,
2727 t30ShrdPrm.hdlc_snd.c_cig );
2728 }
2729 else
2730 {
2731 t30ShrdPrm.hdlc_snd.c_cig = 0;
2732 }
2733 break;
2734
2735 /*
2736 *---------------------------------------------------------------
2737 * for a DCS frame
2738 *---------------------------------------------------------------
2739 */
2740 case( FRT_DCS ):
2741
2742 t30ShrdPrm.hdlc_snd.v_dis = t30ShrdPrm.hdlc_snd.v_dtc = FALSE;
2743 t30ShrdPrm.hdlc_snd.c_nsc = t30ShrdPrm.hdlc_snd.c_nsf = 0;
2744 t30ShrdPrm.hdlc_snd.c_csi = t30ShrdPrm.hdlc_snd.c_cig = 0;
2745
2746 /* non-standard facility */
2747 t30ShrdPrm.hdlc_snd.c_nss = pT30CmdPrm -> FNSlen;
2748
2749 if (pT30CmdPrm -> FNSlen)
2750 {
2751 memcpy( t30ShrdPrm.hdlc_snd.nss, pT30CmdPrm -> FNSoct,
2752 pT30CmdPrm -> FNSlen);
2753 }
2754
2755 if( pT30CmdPrm -> FPWpwd[0] NEQ 0 ) /* password string */
2756 {
2757 t30ShrdPrm.hdlc_snd.c_pwd = strlen( pT30CmdPrm -> FPWpwd );
2758 strncpy( (char *) t30ShrdPrm.hdlc_snd.pwd,
2759 (char *) pT30CmdPrm -> FPWpwd,
2760 t30ShrdPrm.hdlc_snd.c_pwd );
2761 }
2762 else
2763 {
2764 t30ShrdPrm.hdlc_snd.c_pwd = 0;
2765 }
2766
2767 if( pT30CmdPrm -> FSAsub[0] NEQ 0 ) /* subaddress string */
2768 {
2769 t30ShrdPrm.hdlc_snd.c_sub = strlen( pT30CmdPrm -> FSAsub );
2770 strncpy( (char *) t30ShrdPrm.hdlc_snd.sub,
2771 (char *) pT30CmdPrm -> FSAsub,
2772 t30ShrdPrm.hdlc_snd.c_sub );
2773 }
2774 else
2775 {
2776 t30ShrdPrm.hdlc_snd.c_sub = 0;
2777 }
2778
2779 if( pT30CmdPrm -> FLIstr[0] NEQ 0 ) /* transmitting subscr. id */
2780 {
2781 t30ShrdPrm.hdlc_snd.c_tsi = strlen( pT30CmdPrm -> FLIstr );
2782 strncpy( (char *) t30ShrdPrm.hdlc_snd.tsi,
2783 (char *) pT30CmdPrm -> FLIstr,
2784 t30ShrdPrm.hdlc_snd.c_tsi );
2785 }
2786 else
2787 {
2788 t30ShrdPrm.hdlc_snd.c_tsi = 0;
2789 }
2790 break;
2791 }
2792
2793 /*
2794 *-------------------------------------------------------------------
2795 * send capability parameter
2796 *-------------------------------------------------------------------
2797 */
2798 psaT30_Capabilities( );
2799
2800 /*
2801 *-------------------------------------------------------------------
2802 * check for T30 modification
2803 *-------------------------------------------------------------------
2804 */
2805 if( frmTyp EQ FRT_DCS )
2806 {
2807 if( cmhT30_Chk4TCHAdpt() )
2808 {
2809 ccShrdPrm.datStat = DS_TCH_MDF; /* wait for TCH change */
2810 }
2811 else
2812 {
2813 if( cmhT30_Modify() NEQ AT_EXCT )
2814 {
2815 ccShrdPrm.datStat = DS_DSC_REQ;
2816 cmhT30_Deactivate();
2817 }
2818 }
2819 }
2820 return( AT_EXCT );
2821 }
2822
2823
2824 /*
2825 +-------------------------------------------------------------------+
2826 | PROJECT : GSM-PS (6147) MODULE : CMH_T30S |
2827 | ROUTINE : cmhT30_PPMRcvd |
2828 +-------------------------------------------------------------------+
2829
2830 PURPOSE : post page message was received
2831
2832 */
2833 /* does not seem to be called */
2834 #if 0
2835 GLOBAL void cmhT30_PPMRcvd ( UBYTE ppm )
2836 {
2837 TRACE_FUNCTION ("cmhT30_PPMRcvd()");
2838
2839 /* determine type of post page message */
2840 switch( ppm )
2841 {
2842 case( SGN_MPS ): /* multi-page signal */
2843 case( SGN_EOP ): /* end of procedure */
2844
2845 t30ShrdPrm.faxStat = FS_SND_DOC; /* stay in send document */
2846 break;
2847
2848 case( SGN_EOM ):
2849
2850 /*--- no more doc available for polling if polled ---*/
2851 if( ccShrdPrm.ctb[t30ShrdPrm.cId].calType EQ CT_MTC )
2852 {
2853 fnd_cmhPrm[t30EntStat.entOwn].t30CmdPrm.FLPval = FLP_VAL_NoPollDoc;
2854 }
2855
2856 t30ShrdPrm.faxStat = FS_DOC_TRF; /* switch to document transfered */
2857 break;
2858
2859 default:
2860
2861 return;
2862 }
2863
2864 /* send PPM to T.30 */
2865 t30ShrdPrm.sgn_snd = ppm;
2866
2867 if( PRIRcvdFlg AND
2868 fnd_cmhPrm[t30EntStat.entOwn].t30CmdPrm.FIEval EQ FIE_VAL_AcceptPRI)
2869
2870 t30ShrdPrm.sgn_snd |= PRI_MRK;
2871
2872 if( pageSentFlg EQ TRUE )
2873 {
2874 if( psaT30_Ppm( ) < 0 ) /* T30 PPM request */
2875 {
2876 TRACE_EVENT( "FATAL RETURN psaT30 in cmhT30_PPMRcvd" );
2877 }
2878 }
2879 else
2880
2881 ppmPendFlg = TRUE;
2882 }
2883 #endif /* 0 */
2884
2885 /*
2886 +-------------------------------------------------------------------+
2887 | PROJECT : GSM-PS (6147) MODULE : CMH_T30S |
2888 | ROUTINE : cmhT30_PRIRcvd |
2889 +-------------------------------------------------------------------+
2890
2891 PURPOSE : procedure interrupt message was received
2892
2893 */
2894
2895 GLOBAL void cmhT30_PRIRcvd ( void )
2896 {
2897 TRACE_FUNCTION ("cmhT30_PRIRcvd()");
2898
2899 PRIRcvdFlg = TRUE;
2900 }
2901
2902 /*
2903 +-------------------------------------------------------------------+
2904 | PROJECT : GSM-PS (6147) MODULE : CMH_T30 |
2905 | ROUTINE : cmhT30_FITTimeout |
2906 +-------------------------------------------------------------------+
2907
2908 PURPOSE : handle FAX inactivity timeout
2909
2910 */
2911
2912 GLOBAL void cmhT30_FITTimeout ( void )
2913 {
2914 TRACE_FUNCTION( "cmhT30_FITTimeout()" );
2915
2916 if (!psaCC_ctbIsValid (t30ShrdPrm.cId))
2917 {
2918 TRACE_ERROR ("t30ShrdPrm.cId invalid");
2919 return;
2920 }
2921
2922 /*
2923 *-------------------------------------------------------------------
2924 * notify CC to release the call
2925 *-------------------------------------------------------------------
2926 */
2927 t30ShrdPrm.faxStat = FS_IDL;
2928 t30EntStat.curCmd = AT_CMD_NONE;
2929
2930 cmhCC_T30_Failed();
2931
2932 if( fnd_cmhPrm[t30EntStat.entOwn].t30CmdPrm.FITact EQ FIT_ACT_OnHookRst )
2933
2934 fnd_cmhPrm[t30EntStat.entOwn].t30CmdPrm.FCLASSclass = FCLASS_CLASS_Data;
2935 }
2936 #endif /* DTI OR FF_FAX*/
2937 /*==== EOF ========================================================*/