FreeCalypso > hg > freecalypso-citrine
diff g23m-aci/aci/cmh_t30s.c @ 0:75a11d740a02
initial import of gsm-fw from freecalypso-sw rev 1033:5ab737ac3ad7
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Thu, 09 Jun 2016 00:02:41 +0000 |
| parents | |
| children |
line wrap: on
line diff
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/g23m-aci/aci/cmh_t30s.c Thu Jun 09 00:02:41 2016 +0000 @@ -0,0 +1,2937 @@ +/* ++----------------------------------------------------------------------------- +| Project : GSM-PS (6147) +| Modul : CMH_T30S ++----------------------------------------------------------------------------- +| Copyright 2002 Texas Instruments Berlin, AG +| All rights reserved. +| +| This file is confidential and a trade secret of Texas +| Instruments Berlin, AG +| The receipt of or possession of this file does not convey +| any rights to reproduce or disclose its contents or to +| manufacture, use, or sell anything it may describe, in +| whole, or in part, without the specific written consent of +| Texas Instruments Berlin, AG. ++----------------------------------------------------------------------------- +| Purpose : This module provides the set functions related to the +| protocol stack adapter for T30. ++----------------------------------------------------------------------------- +*/ + +#if defined (DTI) || defined (FF_FAX) + +#ifndef CMH_T30S_C +#define CMH_T30S_C +#endif + +#include "aci_all.h" +/*==== INCLUDES ===================================================*/ +#include "aci_cmh.h" +#include "ati_cmd.h" +#include "aci_cmd.h" +#include "dti.h" /* functionality of the dti library */ + +#include "dti_conn_mng.h" +#include "dti_cntrl_mng.h" + +#include "aci_fd.h" +#include "aci_io.h" +#include "psa.h" +#include "psa_t30.h" +#include "psa_cc.h" +#include "cmh.h" +#include "cmh_t30.h" +#include "cmh_cc.h" + + +#include "cmh_ra.h" + +#include "psa_uart.h" +#include "cmh_uart.h" +#ifdef FF_PSI +#include "psa_psi.h" +#include "cmh_psi.h" +#include "ati_src_psi.h" +#endif /*FF_PSI*/ + +/*==== CONSTANTS ==================================================*/ + +#define T30_DEF_THLD (90) /* good page threshold in percent */ + +#ifdef _SIMULATION_ +#define T30_DEF_FRMPRIM (3) /* no. frames per primitive */ +#else +#define T30_DEF_FRMPRIM (42) /* no. frames per primitive */ +#endif + +/*==== EXPORT =====================================================*/ + +/* remove after testing ??? */ +/* EXTERN void TST_getSimData(UBYTE *data, USHORT nomLen, + USHORT *actLen, UBYTE *final); */ + +/*==== VARIABLES ==================================================*/ + +/*==== FUNCTIONS ==================================================*/ + +/* ++--------------------------------------------------------------------+ +| PROJECT : GSM-PS (6147) MODULE : CMH_T30S | +| STATE : code ROUTINE : sAT_PlusFCLASS | ++--------------------------------------------------------------------+ + + PURPOSE : This is the functional counterpart to the +FCLASS AT + command which is responsible to set the class mode. + + <class_type>: class mode. +*/ + +GLOBAL T_ACI_RETURN sAT_PlusFCLASS ( T_ACI_CMD_SRC srcId, + T_ACI_FCLASS_CLASS class_type ) +{ + T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */ + + TRACE_FUNCTION ("sAT_PlusFCLASS()"); + +/* + *------------------------------------------------------------------- + * check command source + *------------------------------------------------------------------- + */ + if(!cmh_IsVldCmdSrc (srcId)) + { + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + + pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm; + +/* + *------------------------------------------------------------------- + * stop FIT timer + *------------------------------------------------------------------- + */ + cmhT30_StopFIT(); + +/* + *------------------------------------------------------------------- + * process the class_type parameter + *------------------------------------------------------------------- + */ + switch( class_type ) + { + case( FCLASS_CLASS_NotPresent ): + break; + + case( FCLASS_CLASS_Voice ): + case( FCLASS_CLASS_Data ): + case( FCLASS_CLASS_Fax20 ): + pT30CmdPrm -> FCLASSclass = class_type; + break; + + case( FCLASS_CLASS_Fax2 ): /* not implemented */ + default: + + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + +/* + *------------------------------------------------------------------- + * start FIT timer + *------------------------------------------------------------------- + */ + cmhT30_StartFIT(); + + return( AT_CMPL ); +} + +/* ++--------------------------------------------------------------------+ +| PROJECT : GSM-PS (6147) MODULE : CMH_T30S | +| STATE : code ROUTINE : sAT_PlusFCR | ++--------------------------------------------------------------------+ + + PURPOSE : This is the functional counterpart to the +FCR AT + command which is responsible to set the receive + capability. + + <value>: receive capability. +*/ + +GLOBAL T_ACI_RETURN sAT_PlusFCR ( T_ACI_CMD_SRC srcId, + T_ACI_FCR_VAL value ) +{ + T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */ + + TRACE_FUNCTION ("sAT_PlusFCR()"); + +/* + *------------------------------------------------------------------- + * check command source + *------------------------------------------------------------------- + */ + if(!cmh_IsVldCmdSrc (srcId)) + { + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + + pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm; + +/* + *------------------------------------------------------------------- + * stop FIT timer + *------------------------------------------------------------------- + */ + cmhT30_StopFIT(); + +/* + *------------------------------------------------------------------- + * process the value parameter + *------------------------------------------------------------------- + */ + switch( value ) + { + case( FCR_VAL_NotPresent ): + break; + + case( FCR_VAL_NoRcvCap ): + case( FCR_VAL_RcvCap ): + pT30CmdPrm -> FCRval = value; + break; + + default: + + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + +/* + *------------------------------------------------------------------- + * start FIT timer + *------------------------------------------------------------------- + */ + cmhT30_StartFIT(); + + return( AT_CMPL ); +} + +/* ++--------------------------------------------------------------------+ +| PROJECT : GSM-PS (6147) MODULE : CMH_T30S | +| STATE : code ROUTINE : sAT_PlusFLI | ++--------------------------------------------------------------------+ + + PURPOSE : This is the functional counterpart to the +FLI AT + command which is responsible to set the local id string + (CSI/TSI). + + <idStr>: local id string(0 terminated). +*/ + +GLOBAL T_ACI_RETURN sAT_PlusFLI ( T_ACI_CMD_SRC srcId, + CHAR * idStr ) +{ + T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */ + + TRACE_FUNCTION ("sAT_PlusFLI()"); + +/* + *------------------------------------------------------------------- + * check command source + *------------------------------------------------------------------- + */ + if(!cmh_IsVldCmdSrc (srcId)) + { + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + + pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm; + +/* + *------------------------------------------------------------------- + * stop FIT timer + *------------------------------------------------------------------- + */ + cmhT30_StopFIT(); + +/* + *------------------------------------------------------------------- + * process the idStr parameter + *------------------------------------------------------------------- + */ + if( ! idStr ) + { + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + + strncpy( pT30CmdPrm -> FLIstr, idStr, MAX_ID_CHAR-1 ); + pT30CmdPrm -> FLIstr[MAX_ID_CHAR-1] = 0; + +/* + *------------------------------------------------------------------- + * start FIT timer + *------------------------------------------------------------------- + */ + cmhT30_StartFIT(); + + return( AT_CMPL ); +} + +/* ++--------------------------------------------------------------------+ +| PROJECT : GSM-PS (6147) MODULE : CMH_T30S | +| STATE : code ROUTINE : sAT_PlusFPI | ++--------------------------------------------------------------------+ + + PURPOSE : This is the functional counterpart to the +FPI AT + command which is responsible to set the local id string + (CGI). + + <idStr>: local id string(0 terminated). +*/ + +GLOBAL T_ACI_RETURN sAT_PlusFPI ( T_ACI_CMD_SRC srcId, + CHAR * idStr ) +{ + T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */ + + TRACE_FUNCTION ("sAT_PlusFPI()"); + +/* + *------------------------------------------------------------------- + * check command source + *------------------------------------------------------------------- + */ + if(!cmh_IsVldCmdSrc (srcId)) + { + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + + pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm; + +/* + *------------------------------------------------------------------- + * stop FIT timer + *------------------------------------------------------------------- + */ + cmhT30_StopFIT(); + +/* + *------------------------------------------------------------------- + * process the idStr parameter + *------------------------------------------------------------------- + */ + if( ! idStr ) + { + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + + strncpy( pT30CmdPrm -> FPIstr, idStr, MAX_ID_CHAR-1 ); + pT30CmdPrm -> FPIstr[MAX_ID_CHAR-1] = 0; + +/* + *------------------------------------------------------------------- + * start FIT timer + *------------------------------------------------------------------- + */ + cmhT30_StartFIT(); + + return( AT_CMPL ); +} + +/* ++--------------------------------------------------------------------+ +| PROJECT : GSM-PS (6147) MODULE : CMH_T30S | +| STATE : code ROUTINE : sAT_PlusFSA | ++--------------------------------------------------------------------+ + + PURPOSE : This is the functional counterpart to the +FSA AT + command which is responsible to set the destination + subaddress string + + <subStr>: destination subaddress string(0 terminated). +*/ + +GLOBAL T_ACI_RETURN sAT_PlusFSA ( T_ACI_CMD_SRC srcId, + CHAR * subStr ) +{ + T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */ + + TRACE_FUNCTION ("sAT_PlusFSA()"); + +/* + *------------------------------------------------------------------- + * check command source + *------------------------------------------------------------------- + */ + if(!cmh_IsVldCmdSrc (srcId)) + { + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + + pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm; + +/* + *------------------------------------------------------------------- + * stop FIT timer + *------------------------------------------------------------------- + */ + cmhT30_StopFIT(); + +/* + *------------------------------------------------------------------- + * process the idStr parameter + *------------------------------------------------------------------- + */ + if( ! subStr ) + { + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + + strncpy( pT30CmdPrm -> FSAsub, subStr, MAX_ID_CHAR-1 ); + pT30CmdPrm -> FSAsub[MAX_ID_CHAR-1] = 0; + +/* + *------------------------------------------------------------------- + * start FIT timer + *------------------------------------------------------------------- + */ + cmhT30_StartFIT(); + + return( AT_CMPL ); +} + +/* ++--------------------------------------------------------------------+ +| PROJECT : GSM-PS (6147) MODULE : CMH_T30S | +| STATE : code ROUTINE : sAT_PlusFPA | ++--------------------------------------------------------------------+ + + PURPOSE : This is the functional counterpart to the +FPA AT + command which is responsible to set the selective polling + address string. + + <sepStr>: selective polling address string(0 terminated). +*/ + +GLOBAL T_ACI_RETURN sAT_PlusFPA ( T_ACI_CMD_SRC srcId, + CHAR * sepStr ) +{ + T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */ + + TRACE_FUNCTION ("sAT_PlusFPA()"); + +/* + *------------------------------------------------------------------- + * check command source + *------------------------------------------------------------------- + */ + if(!cmh_IsVldCmdSrc (srcId)) + { + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + + pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm; + +/* + *------------------------------------------------------------------- + * stop FIT timer + *------------------------------------------------------------------- + */ + cmhT30_StopFIT(); + +/* + *------------------------------------------------------------------- + * process the idStr parameter + *------------------------------------------------------------------- + */ + if( ! sepStr ) + { + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + + strncpy( pT30CmdPrm -> FPAsep, sepStr, MAX_ID_CHAR-1 ); + pT30CmdPrm -> FPAsep[MAX_ID_CHAR-1] = 0; + +/* + *------------------------------------------------------------------- + * start FIT timer + *------------------------------------------------------------------- + */ + cmhT30_StartFIT(); + + return( AT_CMPL ); +} + +/* ++--------------------------------------------------------------------+ +| PROJECT : GSM-PS (6147) MODULE : CMH_T30S | +| STATE : code ROUTINE : sAT_PlusFPW | ++--------------------------------------------------------------------+ + + PURPOSE : This is the functional counterpart to the +FPW AT + command which is responsible to set the password string. + + <pwdStr>: password string(0 terminated). +*/ + +GLOBAL T_ACI_RETURN sAT_PlusFPW ( T_ACI_CMD_SRC srcId, + CHAR * pwdStr ) +{ + T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */ + + TRACE_FUNCTION ("sAT_PlusFPW()"); + +/* + *------------------------------------------------------------------- + * check command source + *------------------------------------------------------------------- + */ + if(!cmh_IsVldCmdSrc (srcId)) + { + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + + pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm; + +/* + *------------------------------------------------------------------- + * stop FIT timer + *------------------------------------------------------------------- + */ + cmhT30_StopFIT(); + +/* + *------------------------------------------------------------------- + * process the idStr parameter + *------------------------------------------------------------------- + */ + if( ! pwdStr ) + { + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + + strncpy( pT30CmdPrm -> FPWpwd, pwdStr, MAX_ID_CHAR-1 ); + pT30CmdPrm -> FPWpwd[MAX_ID_CHAR-1] = 0; + +/* + *------------------------------------------------------------------- + * start FIT timer + *------------------------------------------------------------------- + */ + cmhT30_StartFIT(); + + return( AT_CMPL ); +} + +/* ++--------------------------------------------------------------------+ +| PROJECT : GSM-PS (6147) MODULE : CMH_T30S | +| STATE : code ROUTINE : sAT_PlusFCC | ++--------------------------------------------------------------------+ + + PURPOSE : This is the functional counterpart to the +FCC AT + command which is responsible to set the DCE capabilities. + + <vr>: resolution. + <br>: bit rate. + <wd>: page width. + <ln>: page length. + <df>: data compression. + <ec>: error correction. + <bt>: file transer. + <st>: scan time. + <jp>: JPEG mode. +*/ + +GLOBAL T_ACI_RETURN sAT_PlusFCC ( T_ACI_CMD_SRC srcId, T_ACI_F_VR vr, + T_ACI_F_BR br, T_ACI_F_WD wd, + T_ACI_F_LN ln, T_ACI_F_DF df, + T_ACI_F_EC ec, T_ACI_F_BF bf, + T_ACI_F_ST st, T_ACI_F_JP jp ) +{ + T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */ + + TRACE_FUNCTION ("sAT_PlusFCC()"); + +/* + *------------------------------------------------------------------- + * check command source + *------------------------------------------------------------------- + */ + if(!cmh_IsVldCmdSrc (srcId)) + { + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + + pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm; + +/* + *------------------------------------------------------------------- + * stop FIT timer + *------------------------------------------------------------------- + */ + cmhT30_StopFIT(); + +/* + *------------------------------------------------------------------- + * process the vr parameter + *------------------------------------------------------------------- + */ + switch (vr) + { + case F_VR_NotPresent: + vr = pT30CmdPrm -> FCCvr; + break; + + case F_VR_R8X3_85: + case F_VR_R8X7_7: + case F_VR_R8X15_4: + case F_VR_R16X15_4: + case F_VR_200X100: + case F_VR_200X200: + case F_VR_200X400: + case F_VR_300X300: + break; + + default: + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return AT_FAIL; + } + +/* + *------------------------------------------------------------------- + * process the br parameter + *------------------------------------------------------------------- + */ + switch( br ) + { + case( F_BR_NotPresent ): + + br = pT30CmdPrm -> FCCbr; + break; + + case( F_BR_2400 ): + case( F_BR_4800 ): + case( F_BR_7200 ): + case( F_BR_9600 ): + case( F_BR_12000 ): + case( F_BR_14400 ): + + break; + + default: + + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + +/* + *------------------------------------------------------------------- + * process the wd parameter + *------------------------------------------------------------------- + */ + switch( wd ) + { + case( F_WD_NotPresent ): + + wd = pT30CmdPrm -> FCCwd; + break; + + case( F_WD_1728 ): + case( F_WD_2048 ): + case( F_WD_2432 ): + case( F_WD_1216 ): + case( F_WD_864 ): + + break; + + default: + + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + +/* + *------------------------------------------------------------------- + * process the ln parameter + *------------------------------------------------------------------- + */ + switch( ln ) + { + case( F_LN_NotPresent ): + + ln = pT30CmdPrm -> FCCln; + break; + + case( F_LN_A4 ): + case( F_LN_B4 ): + case( F_LN_Unlimited ): + + break; + + default: + + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + +/* + *------------------------------------------------------------------- + * process the df parameter + *------------------------------------------------------------------- + */ + switch( df ) + { + case( F_DF_NotPresent ): + + df = pT30CmdPrm -> FCCdf; + break; + + case( F_DF_1D_MdfHuff ): + + break; + + case( F_DF_2D_MdfRd_T4 ): /* not implemented */ + case( F_DF_2D_Uncomp ): /* not implemented */ + case( F_DF_2D_MdfRd_T6 ): /* not implemented */ + default: + + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + +/* + *------------------------------------------------------------------- + * process the ec parameter + *------------------------------------------------------------------- + */ + switch( ec ) + { + case( F_EC_NotPresent ): + + ec = pT30CmdPrm -> FCCec; + break; + + case( F_EC_DisableECM ): + + break; + + case( F_EC_EnableECM ): /* not implemented */ + case( F_EC_EnableHalfDup ): /* not implemented */ + case( F_EC_EnableFullDup ): /* not implemented */ + default: + + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + +/* + *------------------------------------------------------------------- + * process the bf parameter + *------------------------------------------------------------------- + */ + if( bf NEQ F_BF_NotPresent ) + { + if( bf > F_BF_DisableFileTrnsf ) /* others are not implemented */ + { + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + } + else + + bf = pT30CmdPrm -> FCCbf; + +/* + *------------------------------------------------------------------- + * process the st parameter + *------------------------------------------------------------------- + */ + switch( st ) + { + case( F_ST_NotPresent ): + + st = pT30CmdPrm -> FCCst; + break; + + case( F_ST_0_0 ): + case( F_ST_5_5 ): + case( F_ST_10_5 ): + case( F_ST_10_10 ): + case( F_ST_20_10 ): + case( F_ST_20_20 ): + case( F_ST_40_20 ): + case( F_ST_40_40 ): + + break; + + default: + + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + +/* + *------------------------------------------------------------------- + * process the jp parameter + *------------------------------------------------------------------- + */ + if( jp NEQ F_JP_NotPresent ) + { + if( jp > F_JP_DisableJPEG ) /* others are not implemented */ + { + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + } + else + + jp = pT30CmdPrm -> FCCjp; + + +/* + *------------------------------------------------------------------- + * assign the parameters + *------------------------------------------------------------------- + */ + pT30CmdPrm -> FCCvr = pT30CmdPrm -> FISvr = vr; + pT30CmdPrm -> FCCbr = pT30CmdPrm -> FISbr = br; + pT30CmdPrm -> FCCwd = pT30CmdPrm -> FISwd = wd; + pT30CmdPrm -> FCCln = pT30CmdPrm -> FISln = ln; + pT30CmdPrm -> FCCdf = pT30CmdPrm -> FISdf = df; + pT30CmdPrm -> FCCec = pT30CmdPrm -> FISec = ec; + pT30CmdPrm -> FCCbf = pT30CmdPrm -> FISbf = bf; + pT30CmdPrm -> FCCst = pT30CmdPrm -> FISst = st; + pT30CmdPrm -> FCCjp = pT30CmdPrm -> FISjp = jp; + + +/* + *------------------------------------------------------------------- + * start FIT timer + *------------------------------------------------------------------- + */ + cmhT30_StartFIT(); + + return( AT_CMPL ); +} + +/* ++--------------------------------------------------------------------+ +| PROJECT : GSM-PS (6147) MODULE : CMH_T30S | +| STATE : code ROUTINE : sAT_PlusFIS | ++--------------------------------------------------------------------+ + + PURPOSE : This is the functional counterpart to the +FIS AT + command which is responsible to set the current session + capabilities. + + <vr>: resolution. + <br>: bit rate. + <wd>: page width. + <ln>: page length. + <df>: data compression. + <ec>: error correction. + <bt>: file transer. + <st>: scan time. + <jp>: JPEG mode. +*/ + +GLOBAL T_ACI_RETURN sAT_PlusFIS ( T_ACI_CMD_SRC srcId, T_ACI_F_VR vr, + T_ACI_F_BR br, T_ACI_F_WD wd, + T_ACI_F_LN ln, T_ACI_F_DF df, + T_ACI_F_EC ec, T_ACI_F_BF bf, + T_ACI_F_ST st, T_ACI_F_JP jp ) +{ + T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */ + + TRACE_FUNCTION ("sAT_PlusFIS()"); + +/* + *------------------------------------------------------------------- + * check command source + *------------------------------------------------------------------- + */ + if(!cmh_IsVldCmdSrc (srcId)) + { + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + + pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm; + +/* + *------------------------------------------------------------------- + * stop FIT timer + *------------------------------------------------------------------- + */ + cmhT30_StopFIT(); + +/* + *------------------------------------------------------------------- + * process the vr parameter + *------------------------------------------------------------------- + */ + switch (vr) + { + case F_VR_NotPresent: + vr = pT30CmdPrm -> FISvr; + break; + + case F_VR_R8X3_85: + case F_VR_R8X7_7: + case F_VR_R8X15_4: + case F_VR_R16X15_4: + case F_VR_200X100: + case F_VR_200X200: + case F_VR_200X400: + case F_VR_300X300: + break; + + default: + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return AT_FAIL; + } + +/* + *------------------------------------------------------------------- + * process the br parameter + *------------------------------------------------------------------- + */ + switch( br ) + { + case( F_BR_NotPresent ): + + br = pT30CmdPrm -> FISbr; + break; + + case( F_BR_2400 ): + case( F_BR_4800 ): + case( F_BR_7200 ): + case( F_BR_9600 ): + case( F_BR_12000 ): + case( F_BR_14400 ): + + break; + + default: + + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + +/* + *------------------------------------------------------------------- + * process the wd parameter + *------------------------------------------------------------------- + */ + switch( wd ) + { + case( F_WD_NotPresent ): + + wd = pT30CmdPrm -> FISwd; + break; + + case( F_WD_1728 ): + case( F_WD_2048 ): + case( F_WD_2432 ): + case( F_WD_1216 ): + case( F_WD_864 ): + + break; + + default: + + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + +/* + *------------------------------------------------------------------- + * process the ln parameter + *------------------------------------------------------------------- + */ + switch( ln ) + { + case( F_LN_NotPresent ): + + ln = pT30CmdPrm -> FISln; + break; + + case( F_LN_A4 ): + case( F_LN_B4 ): + case( F_LN_Unlimited ): + + break; + + default: + + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + +/* + *------------------------------------------------------------------- + * process the df parameter + *------------------------------------------------------------------- + */ + switch( df ) + { + case( F_DF_NotPresent ): + + df = pT30CmdPrm -> FISdf; + break; + + case( F_DF_1D_MdfHuff ): + + break; + + case( F_DF_2D_MdfRd_T4 ): /* not implemented */ + case( F_DF_2D_Uncomp ): /* not implemented */ + case( F_DF_2D_MdfRd_T6 ): /* not implemented */ + default: + + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + +/* + *------------------------------------------------------------------- + * process the ec parameter + *------------------------------------------------------------------- + */ + switch( ec ) + { + case( F_EC_NotPresent ): + + ec = pT30CmdPrm -> FISec; + break; + + case( F_EC_DisableECM ): + + break; + + case( F_EC_EnableECM ): /* not implemented */ + case( F_EC_EnableHalfDup ): /* not implemented */ + case( F_EC_EnableFullDup ): /* not implemented */ + default: + + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + +/* + *------------------------------------------------------------------- + * process the bf parameter + *------------------------------------------------------------------- + */ + if( bf NEQ F_BF_NotPresent ) + { + if( bf > F_BF_DisableFileTrnsf ) /* others are not implemented */ + { + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + } + else + + bf = pT30CmdPrm -> FISbf; + +/* + *------------------------------------------------------------------- + * process the st parameter + *------------------------------------------------------------------- + */ + switch( st ) + { + case( F_ST_NotPresent ): + + st = pT30CmdPrm -> FISst; + break; + + case( F_ST_0_0 ): + case( F_ST_5_5 ): + case( F_ST_10_5 ): + case( F_ST_10_10 ): + case( F_ST_20_10 ): + case( F_ST_20_20 ): + case( F_ST_40_20 ): + case( F_ST_40_40 ): + + break; + + default: + + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + +/* + *------------------------------------------------------------------- + * process the jp parameter + *------------------------------------------------------------------- + */ + if( jp NEQ F_JP_NotPresent ) + { + if( jp > F_JP_DisableJPEG ) /* others are not implemented */ + { + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + } + else + + jp = pT30CmdPrm -> FISjp; + +/* + *------------------------------------------------------------------- + * assign the parameters + *------------------------------------------------------------------- + */ + pT30CmdPrm -> FISvr = vr; + pT30CmdPrm -> FISbr = br; + pT30CmdPrm -> FISwd = wd; + pT30CmdPrm -> FISln = ln; + pT30CmdPrm -> FISdf = df; + pT30CmdPrm -> FISec = ec; + pT30CmdPrm -> FISbf = bf; + pT30CmdPrm -> FISst = st; + pT30CmdPrm -> FISjp = jp; + +/* + *------------------------------------------------------------------- + * start FIT timer + *------------------------------------------------------------------- + */ + cmhT30_StartFIT(); + + return( AT_CMPL ); +} + +/* ++--------------------------------------------------------------------+ +| PROJECT : GSM-PS (6147) MODULE : CMH_T30S | +| STATE : code ROUTINE : sAT_PlusFNS | ++--------------------------------------------------------------------+ + + PURPOSE : This is the functional counterpart to the +FNS AT + command which is responsible to set the string for + non-standard facilities. + + <len>: length of nsf string. + <nsf>: nsf octed string. +*/ + +GLOBAL T_ACI_RETURN sAT_PlusFNS ( T_ACI_CMD_SRC srcId, + UBYTE len, + UBYTE * nsf ) +{ + T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */ + + TRACE_FUNCTION ("sAT_PlusFNS()"); + +/* + *------------------------------------------------------------------- + * check command source + *------------------------------------------------------------------- + */ + if(!cmh_IsVldCmdSrc (srcId)) + { + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + + pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm; + +/* + *------------------------------------------------------------------- + * stop FIT timer + *------------------------------------------------------------------- + */ + cmhT30_StopFIT(); + +/* + *------------------------------------------------------------------- + * process the len and nsf parameter + *------------------------------------------------------------------- + */ + if((len > 0 AND ! nsf) OR len > MAX_NSF_BYTE ) + { + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + + if( len EQ 0 ) + { + pT30CmdPrm -> FNSlen = 0; + } + else + { + if (MINIMUM(MAX_NSF_BYTE - pT30CmdPrm -> FNSlen, len)) + { + memcpy( &pT30CmdPrm -> FNSoct[pT30CmdPrm -> FNSlen], nsf, + MINIMUM(MAX_NSF_BYTE - pT30CmdPrm -> FNSlen, len) ); + } + + pT30CmdPrm -> FNSlen += + MINIMUM(MAX_NSF_BYTE - pT30CmdPrm -> FNSlen, len); + } + +/* + *------------------------------------------------------------------- + * start FIT timer + *------------------------------------------------------------------- + */ + cmhT30_StartFIT(); + + return( AT_CMPL ); +} + +/* ++--------------------------------------------------------------------+ +| PROJECT : GSM-PS (6147) MODULE : CMH_T30S | +| STATE : code ROUTINE : sAT_PlusFLP | ++--------------------------------------------------------------------+ + + PURPOSE : This is the functional counterpart to the +FLP AT + command which is responsible to indicate a document for + polling. + + <value>: polling indication. +*/ + +GLOBAL T_ACI_RETURN sAT_PlusFLP (T_ACI_CMD_SRC srcId, + T_ACI_FLP_VAL value ) +{ + T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */ + + TRACE_FUNCTION ("sAT_PlusFLP()"); + +/* + *------------------------------------------------------------------- + * check command source + *------------------------------------------------------------------- + */ + if(!cmh_IsVldCmdSrc (srcId)) + { + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + + pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm; + +/* + *------------------------------------------------------------------- + * stop FIT timer + *------------------------------------------------------------------- + */ + cmhT30_StopFIT(); + +/* + *------------------------------------------------------------------- + * process the value parameter + *------------------------------------------------------------------- + */ + switch( value ) + { + case( FLP_VAL_NotPresent ): + + break; + + case( FLP_VAL_NoPollDoc ): + case( FLP_VAL_PollDoc ): + + pT30CmdPrm -> FLPval = value; + break; + + default: + + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + +/* + *------------------------------------------------------------------- + * start FIT timer + *------------------------------------------------------------------- + */ + cmhT30_StartFIT(); + + return( AT_CMPL ); +} + +/* ++--------------------------------------------------------------------+ +| PROJECT : GSM-PS (6147) MODULE : CMH_T30S | +| STATE : code ROUTINE : sAT_PlusFIE | ++--------------------------------------------------------------------+ + + PURPOSE : This is the functional counterpart to the +FIE AT + command which is responsible to enable procedure interrupts. + + <value>: PI mode. +*/ + +GLOBAL T_ACI_RETURN sAT_PlusFIE (T_ACI_CMD_SRC srcId, + T_ACI_FIE_VAL value ) +{ + T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */ + + TRACE_FUNCTION ("sAT_PlusFIE()"); + +/* + *------------------------------------------------------------------- + * check command source + *------------------------------------------------------------------- + */ + if(!cmh_IsVldCmdSrc (srcId)) + { + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + + pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm; + +/* + *------------------------------------------------------------------- + * stop FIT timer + *------------------------------------------------------------------- + */ + cmhT30_StopFIT(); + +/* + *------------------------------------------------------------------- + * process the value parameter + *------------------------------------------------------------------- + */ + switch( value ) + { + case( FIE_VAL_NotPresent ): + + break; + + case( FIE_VAL_IgnorePRI ): + case( FIE_VAL_AcceptPRI ): + + pT30CmdPrm -> FIEval = value; + break; + + default: + + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + +/* + *------------------------------------------------------------------- + * start FIT timer + *------------------------------------------------------------------- + */ + cmhT30_StartFIT(); + + return( AT_CMPL ); +} + +/* ++--------------------------------------------------------------------+ +| PROJECT : GSM-PS (6147) MODULE : CMH_T30S | +| STATE : code ROUTINE : sAT_PlusFCQ | ++--------------------------------------------------------------------+ + + PURPOSE : This is the functional counterpart to the +FCQ AT + command which is responsible to set the copy quality + checking. + + <rq>: receive quality. + <tq>: transmit quality. +*/ + +GLOBAL T_ACI_RETURN sAT_PlusFCQ (T_ACI_CMD_SRC srcId, + T_ACI_FCQ_RQ rq, + T_ACI_FCQ_TQ tq ) +{ + T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */ + + TRACE_FUNCTION ("sAT_PlusFCQ()"); + +/* + *------------------------------------------------------------------- + * check command source + *------------------------------------------------------------------- + */ + if(!cmh_IsVldCmdSrc (srcId)) + { + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + + pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm; + +/* + *------------------------------------------------------------------- + * stop FIT timer + *------------------------------------------------------------------- + */ + cmhT30_StopFIT(); + +/* + *------------------------------------------------------------------- + * process the rq parameter + *------------------------------------------------------------------- + */ + switch( rq ) + { + case( FCQ_RQ_NotPresent ): + + rq = pT30CmdPrm -> FCQrq; + break; + + case( FCQ_RQ_CQCDisabled ): + case( FCQ_RQ_CQCEnabled ): + + break; + + case( FCQ_RQ_CQCandCorrection ): + default: + + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + +/* + *------------------------------------------------------------------- + * process the tq parameter + *------------------------------------------------------------------- + */ + switch( tq ) + { + case( FCQ_TQ_NotPresent ): + case( FCQ_TQ_CQCDisabled ): + + break; + + case( FCQ_TQ_CQCEnabled ): + case( FCQ_TQ_CQCandCorrection ): + default: + + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + +/* + *------------------------------------------------------------------- + * assign the parameters + *------------------------------------------------------------------- + */ + pT30CmdPrm -> FCQrq = rq; + +/* + *------------------------------------------------------------------- + * start FIT timer + *------------------------------------------------------------------- + */ + cmhT30_StartFIT(); + + return( AT_CMPL ); +} + +/* ++--------------------------------------------------------------------+ +| PROJECT : GSM-PS (6147) MODULE : CMH_T30S | +| STATE : code ROUTINE : sAT_PlusFIT | ++--------------------------------------------------------------------+ + + PURPOSE : This is the functional counterpart to the +FIT AT + command which is responsible to set the inactivity timeout. + + <time>: inactivity timeout. + <act> : action. +*/ + +GLOBAL T_ACI_RETURN sAT_PlusFIT (T_ACI_CMD_SRC srcId, + SHORT time, + T_ACI_FIT_ACT act ) +{ + T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */ + + TRACE_FUNCTION ("sAT_PlusFIT()"); + +/* + *------------------------------------------------------------------- + * check command source + *------------------------------------------------------------------- + */ + if(!cmh_IsVldCmdSrc (srcId)) + { + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + + pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm; + +/* + *------------------------------------------------------------------- + * stop FIT timer + *------------------------------------------------------------------- + */ + cmhT30_StopFIT(); + +/* + *------------------------------------------------------------------- + * process the act parameter + *------------------------------------------------------------------- + */ + switch( act ) + { + case( FIT_ACT_NotPresent ): + + act = pT30CmdPrm -> FITact; + break; + + case( FIT_ACT_OnHookRst ): + case( FIT_ACT_OnHook ): + + break; + + default: + + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + +/* + *------------------------------------------------------------------- + * process the time parameter + *------------------------------------------------------------------- + */ + if( time > 255 ) + { + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + +/* + *------------------------------------------------------------------- + * assign the parameters + *------------------------------------------------------------------- + */ + pT30CmdPrm -> FITact = act; + + if( time NEQ ACI_NumParmNotPresent ) + { + pT30CmdPrm -> FITtime = time * 1000; + } + +/* + *------------------------------------------------------------------- + * start FIT timer + *------------------------------------------------------------------- + */ + cmhT30_StartFIT(); + + return( AT_CMPL ); +} + +/* ++--------------------------------------------------------------------+ +| PROJECT : GSM-PS (6147) MODULE : CMH_T30S | +| STATE : code ROUTINE : sAT_PlusFBO | ++--------------------------------------------------------------------+ + + PURPOSE : This is the functional counterpart to the +FBO AT + command which is responsible to set data bit order. + + <value>: data bit order. +*/ + +GLOBAL T_ACI_RETURN sAT_PlusFBO (T_ACI_CMD_SRC srcId, + T_ACI_FBO_VAL value ) +{ + T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */ + + TRACE_FUNCTION ("sAT_PlusFBO()"); + +/* + *------------------------------------------------------------------- + * check command source + *------------------------------------------------------------------- + */ + if(!cmh_IsVldCmdSrc (srcId)) + { + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + + pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm; + +/* + *------------------------------------------------------------------- + * stop FIT timer + *------------------------------------------------------------------- + */ + cmhT30_StopFIT(); + +/* + *------------------------------------------------------------------- + * process the value parameter + *------------------------------------------------------------------- + */ + switch( value ) + { + case( FBO_VAL_NotPresent ): + + value = pT30CmdPrm -> FBOval; + break; + + case( FBO_VAL_DirCDirBD ): + case( FBO_VAL_RvrCDirBD ): + case( FBO_VAL_DirCRvrBD ): + case( FBO_VAL_RvrCRvrBD ): + + break; + + default: + + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + +/* + *------------------------------------------------------------------- + * assign the parameters + *------------------------------------------------------------------- + */ + pT30CmdPrm -> FBOval = value; + +/* + *------------------------------------------------------------------- + * start FIT timer + *------------------------------------------------------------------- + */ + cmhT30_StartFIT(); + + return( AT_CMPL ); +} + +/* ++--------------------------------------------------------------------+ +| PROJECT : GSM-PS (6147) MODULE : CMH_T30S | +| STATE : code ROUTINE : sAT_PlusFRQ | ++--------------------------------------------------------------------+ + + PURPOSE : This is the functional counterpart to the +FRQ AT + command which is responsible to set the receive quality + thresholds. + + <pgl>: percentage of good lines. + <cbl>: consecutive bad lines. +*/ + +GLOBAL T_ACI_RETURN sAT_PlusFRQ (T_ACI_CMD_SRC srcId, + SHORT pgl, + SHORT cbl ) +{ + TRACE_FUNCTION ("sAT_PlusFRQ()"); + + /* process the pgl parameter */ + if( pgl NEQ 0 ) + { + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + + /* process the cbl parameter */ + if( cbl NEQ 0 ) + { + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + + /* start FIT timer */ + cmhT30_StartFIT(); + + return( AT_CMPL ); +} + +/* ++--------------------------------------------------------------------+ +| PROJECT : GSM-PS (6147) MODULE : CMH_T30S | +| STATE : code ROUTINE : sAT_PlusFEA | ++--------------------------------------------------------------------+ + + PURPOSE : This is the functional counterpart to the +FEA AT + command which is responsible to set phase C EOL alignment. + + <value>: alignment. +*/ + +GLOBAL T_ACI_RETURN sAT_PlusFEA (T_ACI_CMD_SRC srcId, + SHORT value ) +{ + + TRACE_FUNCTION ("sAT_PlusFEA()"); + +/* + *------------------------------------------------------------------- + * process the value parameter + *------------------------------------------------------------------- + */ + if( value NEQ ACI_NumParmNotPresent ) + { + if( value NEQ 0 ) + { + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + } + +/* + *------------------------------------------------------------------- + * start FIT timer + *------------------------------------------------------------------- + */ + cmhT30_StartFIT(); + + return( AT_CMPL ); +} + +/* ++--------------------------------------------------------------------+ +| PROJECT : GSM-PS (6147) MODULE : CMH_T30S | +| STATE : code ROUTINE : sAT_PlusFCT | ++--------------------------------------------------------------------+ + + PURPOSE : This is the functional counterpart to the +FCT AT + command which is responsible to set phase C response + timeout. + + <value>: timeout. +*/ + +GLOBAL T_ACI_RETURN sAT_PlusFCT (T_ACI_CMD_SRC srcId, + SHORT value ) +{ + + TRACE_FUNCTION ("sAT_PlusFCT()"); + +/* + *------------------------------------------------------------------- + * process the value parameter + *------------------------------------------------------------------- + */ + if( value NEQ ACI_NumParmNotPresent ) + { + if( value NEQ 30 ) + { + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + } + +/* + *------------------------------------------------------------------- + * start FIT timer + *------------------------------------------------------------------- + */ + cmhT30_StartFIT(); + + return( AT_CMPL ); +} + +/* ++--------------------------------------------------------------------+ +| PROJECT : GSM-PS (6147) MODULE : CMH_T30S | +| STATE : code ROUTINE : sAT_PlusFMS | ++--------------------------------------------------------------------+ + + PURPOSE : This is the functional counterpart to the +FMS AT + command which is responsible to set the minimum phase C + speed. + + <br>: minimum phase C baud rate. +*/ + +GLOBAL T_ACI_RETURN sAT_PlusFMS (T_ACI_CMD_SRC srcId, + T_ACI_F_BR br) +{ + T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */ + + TRACE_FUNCTION ("sAT_PlusFMS()"); + +/* + *------------------------------------------------------------------- + * check command source + *------------------------------------------------------------------- + */ + if(!cmh_IsVldCmdSrc (srcId)) + { + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + + pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm; + +/* + *------------------------------------------------------------------- + * stop FIT timer + *------------------------------------------------------------------- + */ + cmhT30_StopFIT(); + +/* + *------------------------------------------------------------------- + * process the br parameter + *------------------------------------------------------------------- + */ + switch( br ) + { + case( F_BR_NotPresent ): + + break; + + case( F_BR_2400 ): + case( F_BR_4800 ): + case( F_BR_7200 ): + case( F_BR_9600 ): + case( F_BR_12000 ): + case( F_BR_14400 ): + + pT30CmdPrm -> FMSbr = br; + break; + + default: + + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + +/* + *------------------------------------------------------------------- + * start FIT timer + *------------------------------------------------------------------- + */ + cmhT30_StartFIT(); + + return( AT_CMPL ); +} + +/* ++--------------------------------------------------------------------+ +| PROJECT : GSM-PS (6147) MODULE : CMH_T30S | +| STATE : code ROUTINE : sAT_PlusFFC | ++--------------------------------------------------------------------+ + + PURPOSE : This is the functional counterpart to the +FFC AT + command which is responsible to set the format conversion + parameters. + + <vrc>: vertical resolution format. + <dfc>: data format. + <lnc>: page length format. + <wdc>: page width format. +*/ + +GLOBAL T_ACI_RETURN sAT_PlusFFC (T_ACI_CMD_SRC srcId, + T_ACI_FFC_VRC vrc, + T_ACI_FFC_DFC dfc, + T_ACI_FFC_LNC lnc, + T_ACI_FFC_WDC wdc) +{ + + TRACE_FUNCTION ("sAT_PlusFFC()"); + +/* + *------------------------------------------------------------------- + * process the vrc parameter + *------------------------------------------------------------------- + */ + if( vrc NEQ FFC_VRC_NotPresent ) + { + if( vrc NEQ FFC_VRC_Ignored ) + { + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + } + +/* + *------------------------------------------------------------------- + * process the dfc parameter + *------------------------------------------------------------------- + */ + if( dfc NEQ FFC_DFC_NotPresent ) + { + if( dfc NEQ FFC_DFC_Ignored ) + { + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + } + +/* + *------------------------------------------------------------------- + * process the lnc parameter + *------------------------------------------------------------------- + */ + if( lnc NEQ FFC_LNC_NotPresent ) + { + if( lnc NEQ FFC_LNC_Ignored ) + { + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + } + +/* + *------------------------------------------------------------------- + * process the wdc parameter + *------------------------------------------------------------------- + */ + if( wdc NEQ FFC_WDC_NotPresent ) + { + if( wdc NEQ FFC_WDC_Ignored ) + { + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + } + +/* + *------------------------------------------------------------------- + * start FIT timer + *------------------------------------------------------------------- + */ + cmhT30_StartFIT(); + + return( AT_CMPL ); +} + +/* ++--------------------------------------------------------------------+ +| PROJECT : GSM-PS (6147) MODULE : CMH_T30S | +| STATE : code ROUTINE : sAT_PlusFIP | ++--------------------------------------------------------------------+ + + PURPOSE : This is the functional counterpart to the +FIP AT + command which is responsible to reset the FAX parameter to + their initial value. + +*/ + +GLOBAL T_ACI_RETURN sAT_PlusFIP (T_ACI_CMD_SRC srcId) +{ + + TRACE_FUNCTION ("sAT_PlusFIP()"); + +/* + *------------------------------------------------------------------- + * check command source and reset parameters + *------------------------------------------------------------------- + */ + if(!cmh_IsVldCmdSrc (srcId)) + { + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + + cmhT30_StopFIT(); + + cmhT30_InitFAXPrms( srcId ); + + cmhT30_RstNgtPrms(); + +/* + *------------------------------------------------------------------- + * start FIT timer + *------------------------------------------------------------------- + */ + cmhT30_StartFIT(); + + return( AT_CMPL ); +} + +/* ++--------------------------------------------------------------------+ +| PROJECT : GSM-PS (6147) MODULE : CMH_T30S | +| STATE : code ROUTINE : sAT_PlusFPS | ++--------------------------------------------------------------------+ + + PURPOSE : This is the functional counterpart to the +FPS AT command + which is responsible to set the post page response. + + <ppr>: post page response. +*/ + +GLOBAL T_ACI_RETURN sAT_PlusFPS (T_ACI_CMD_SRC srcId, + T_ACI_FPS_PPR ppr ) +{ + T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */ + + TRACE_FUNCTION ("sAT_PlusFPS()"); + +/* + *------------------------------------------------------------------- + * check command source + *------------------------------------------------------------------- + */ + if(!cmh_IsVldCmdSrc (srcId)) + { + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + + pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm; + +/* + *------------------------------------------------------------------- + * stop FIT timer + *------------------------------------------------------------------- + */ + cmhT30_StopFIT(); + +/* + *------------------------------------------------------------------- + * process the ppr parameter + *------------------------------------------------------------------- + */ + switch( ppr ) + { + case( FPS_PPR_NotPresent ): + break; + + case( FPS_PPR_Mcf ): + case( FPS_PPR_Rtn ): + case( FPS_PPR_Rtp ): + case( FPS_PPR_Pip ): + case( FPS_PPR_Pin ): + + pT30CmdPrm -> FPSppr = ppr; + break; + + default: + + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + +/* + *------------------------------------------------------------------- + * start FIT timer + *------------------------------------------------------------------- + */ + cmhT30_StartFIT(); + + return( AT_CMPL ); +} + +/* ++--------------------------------------------------------------------+ +| PROJECT : GSM-PS (6147) MODULE : CMH_T30S | +| STATE : code ROUTINE : sAT_PlusFSP | ++--------------------------------------------------------------------+ + + PURPOSE : This is the functional counterpart to the +FSP AT command + which is responsible to set the possibility of polling. + + <value>: polling mode. +*/ + +GLOBAL T_ACI_RETURN sAT_PlusFSP (T_ACI_CMD_SRC srcId, + T_ACI_FSP_VAL value ) +{ + T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */ + + TRACE_FUNCTION ("sAT_PlusFSP()"); + +/* + *------------------------------------------------------------------- + * check command source + *------------------------------------------------------------------- + */ + if(!cmh_IsVldCmdSrc (srcId)) + { + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + + pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm; + +/* + *------------------------------------------------------------------- + * stop FIT timer + *------------------------------------------------------------------- + */ + cmhT30_StopFIT(); + +/* + *------------------------------------------------------------------- + * process the value parameter + *------------------------------------------------------------------- + */ + switch( value ) + { + case( FSP_VAL_NotPresent ): + break; + + case( FSP_VAL_PollDisabled ): + case( FSP_VAL_PollEnable ): + + pT30CmdPrm -> FSPval = value; + break; + + default: + + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + +/* + *------------------------------------------------------------------- + * start FIT timer + *------------------------------------------------------------------- + */ + cmhT30_StartFIT(); + + return( AT_CMPL ); +} + +/* ++--------------------------------------------------------------------+ +| PROJECT : GSM-PS (6147) MODULE : CMH_T30S | +| STATE : code ROUTINE : sAT_PlusFAP | ++--------------------------------------------------------------------+ + + PURPOSE : This is the functional counterpart to the +FAP AT + command which is responsible to set the address and + polling capabilities. + + <sub>: destination subaddressing. + <sep>: selective polling. + <pwd>: password. +*/ + +GLOBAL T_ACI_RETURN sAT_PlusFAP (T_ACI_CMD_SRC srcId, + T_ACI_FAP_VAL sub, + T_ACI_FAP_VAL sep, + T_ACI_FAP_VAL pwd ) +{ + T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */ + + TRACE_FUNCTION ("sAT_PlusFAP()"); + +/* + *------------------------------------------------------------------- + * check command source + *------------------------------------------------------------------- + */ + if(!cmh_IsVldCmdSrc (srcId)) + { + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + + pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm; + +/* + *------------------------------------------------------------------- + * stop FIT timer + *------------------------------------------------------------------- + */ + cmhT30_StopFIT(); + +/* + *------------------------------------------------------------------- + * process the sub parameter + *------------------------------------------------------------------- + */ + switch( sub ) + { + case( FAP_VAL_NotPresent ): + + sub = pT30CmdPrm -> FAPsub; + break; + + case( FAP_VAL_Disabled ): + case( FAP_VAL_Enabled ): + + break; + + default: + + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + +/* + *------------------------------------------------------------------- + * process the sub parameter + *------------------------------------------------------------------- + */ + switch( sep ) + { + case( FAP_VAL_NotPresent ): + + sep = pT30CmdPrm -> FAPsep; + break; + + case( FAP_VAL_Disabled ): + case( FAP_VAL_Enabled ): + + break; + + default: + + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + +/* + *------------------------------------------------------------------- + * process the sub parameter + *------------------------------------------------------------------- + */ + switch( pwd ) + { + case( FAP_VAL_NotPresent ): + + pwd = pT30CmdPrm -> FAPpwd; + break; + + case( FAP_VAL_Disabled ): + case( FAP_VAL_Enabled ): + + break; + + default: + + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + +/* + *------------------------------------------------------------------- + * assign the parameters + *------------------------------------------------------------------- + */ + pT30CmdPrm -> FAPsub = sub; + pT30CmdPrm -> FAPsep = sep; + pT30CmdPrm -> FAPpwd = pwd; + +/* + *------------------------------------------------------------------- + * start FIT timer + *------------------------------------------------------------------- + */ + cmhT30_StartFIT(); + + return( AT_CMPL ); +} + + +/* ++--------------------------------------------------------------------+ +| PROJECT : GSM-PS (6147) MODULE : CMH_T30S | +| STATE : code ROUTINE : sAT_PlusFDT | ++--------------------------------------------------------------------+ + + PURPOSE : This is the functional counterpart to the +FDT AT + command which is responsible to transmit FAX data. + +*/ + +GLOBAL T_ACI_RETURN sAT_PlusFDT (T_ACI_CMD_SRC srcId) +{ + + TRACE_FUNCTION ("sAT_PlusFDT()"); + +/* + *------------------------------------------------------------------- + * check command source + *------------------------------------------------------------------- + */ + if(!cmh_IsVldCmdSrc (srcId) OR + !psaCC_ctbIsValid (t30ShrdPrm.cId) OR + (t30ShrdPrm.faxStat NEQ FS_IDL AND t30ShrdPrm.faxStat NEQ FS_SND_DOC)) + { + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + +/* + *------------------------------------------------------------------- + * stop FIT timer + *------------------------------------------------------------------- + */ + cmhT30_StopFIT(); + +/* + *------------------------------------------------------------------- + * check entity status + *------------------------------------------------------------------- + */ + if( t30EntStat.curCmd NEQ AT_CMD_NONE ) + + return( AT_BUSY ); + + t30EntStat.curCmd = AT_CMD_FDT; + t30EntStat.entOwn = srcId; + +/* + *------------------------------------------------------------------- + * negotiate transmission parameters and send DCS + *------------------------------------------------------------------- + */ + if( t30ShrdPrm.faxStat EQ FS_IDL OR + t30ShrdPrm.faxStat EQ FS_DOC_TRF ) + { + cmhT30_NgtDCEPrms( srcId ); + + /* check for minimum speed condition */ + if( t30NgtPrms.FCSbr < fnd_cmhPrm[srcId].t30CmdPrm.FMSbr ) + { + TRACE_EVENT("DISCONNECT CALL DUE TO FALL BELOW MINIMUM SPEED CONDITION"); + t30ShrdPrm.faxStat = FS_IDL; + t30EntStat.curCmd = AT_CMD_NONE; + ccShrdPrm.datStat = DS_DSC_REQ; + cmhT30_Deactivate (); + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_FaxMinSpeedCond ); + return( AT_FAIL ); + } + cmhT30_SendCaps ( srcId, FRT_DCS ); + } + +/* + *------------------------------------------------------------------- + * check for connect message + *------------------------------------------------------------------- + */ + if( t30ShrdPrm.faxStat EQ FS_IDL OR t30ShrdPrm.faxStat EQ FS_DOC_TRF ) + { + R_AT( RAT_FCS, t30EntStat.entOwn ) + ( t30NgtPrms.FCSvr, + t30NgtPrms.FCSbr, + t30NgtPrms.FCSwd, + t30NgtPrms.FCSln, + t30NgtPrms.FCSdf, + t30NgtPrms.FCSec, + t30NgtPrms.FCSbf, + t30NgtPrms.FCSst, + t30NgtPrms.FCSjp); + } + t30ShrdPrm.faxStat = FS_SND_DOC; + pageSentFlg = FALSE; + ppmPendFlg = FALSE; + cmhT30_StartFIT(); + TRACE_EVENT ("START DTE->DCE FAX DATA PHASE"); +/* + R_AT( RAT_CONNECT, t30EntStat.entOwn ) + ( t30EntStat.curCmd, cmhT30_GetDataRate(), t30ShrdPrm.cId+1, FALSE ); +*/ + return( AT_EXCT ); +} + +/* ++--------------------------------------------------------------------+ +| PROJECT : GSM-PS (6147) MODULE : CMH_T30S | +| STATE : code ROUTINE : sAT_PlusFDR | ++--------------------------------------------------------------------+ + + PURPOSE : This is the functional counterpart to the +FDR AT + command which is responsible to receive FAX data. + +*/ + +GLOBAL T_ACI_RETURN sAT_PlusFDR (T_ACI_CMD_SRC srcId) +{ + TRACE_FUNCTION ("sAT_PlusFDR()"); +/* + *------------------------------------------------------------------- + * check command source + *------------------------------------------------------------------- + */ + if(!cmh_IsVldCmdSrc (srcId) OR + !psaCC_ctbIsValid (t30ShrdPrm.cId) OR + fnd_cmhPrm[srcId].t30CmdPrm.FCRval EQ FCR_VAL_NoRcvCap OR + (t30ShrdPrm.faxStat NEQ FS_IDL AND t30ShrdPrm.faxStat NEQ FS_RCV_DOC)) + { + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + cmhT30_StopFIT(); + +/* + *------------------------------------------------------------------- + * check entity status + *------------------------------------------------------------------- + */ + if( t30EntStat.curCmd NEQ AT_CMD_NONE ) + return( AT_BUSY ); + + t30EntStat.curCmd = AT_CMD_FDR; + t30EntStat.entOwn = srcId; + +/* + *------------------------------------------------------------------- + * check to send a DTC frame + *------------------------------------------------------------------- + */ + if( DTCSentFlg EQ FALSE AND + (t30ShrdPrm.faxStat EQ FS_IDL OR + t30ShrdPrm.faxStat EQ FS_DOC_TRF) AND + psaCC_ctb(t30ShrdPrm.cId)->calType EQ CT_MOC AND + fnd_cmhPrm[t30EntStat.entOwn].t30CmdPrm.FSPval EQ FSP_VAL_PollEnable ) + { + DTCSentFlg = TRUE; + cmhT30_SendCaps ( srcId, FRT_DTC ); + } + +/* + *------------------------------------------------------------------- + * check to send a post page response + *------------------------------------------------------------------- + */ + else if (t30ShrdPrm.faxStat EQ FS_RCV_DOC OR t30ShrdPrm.faxStat EQ FS_DOC_TRF) + { + t30ShrdPrm.sgn_snd = cmhT30_GetPpr(fnd_cmhPrm[srcId].t30CmdPrm.FPSppr); + if( psaT30_Ppm( ) < 0 ) /* send ppm */ + { + TRACE_EVENT( "FATAL RETURN psaT30 in sAT_PlusFDR" ); + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Internal ); + return( AT_FAIL ); + } + } + +/* + *------------------------------------------------------------------- + * check for connect message + *------------------------------------------------------------------- + */ + t30ShrdPrm.faxStat = FS_RCV_DOC; + return( AT_EXCT ); +} + +/* ++--------------------------------------------------------------------+ +| PROJECT : GSM-PS (6147) MODULE : CMH_T30S | +| STATE : code ROUTINE : sAT_PlusFKS | ++--------------------------------------------------------------------+ + + PURPOSE : This is the functional counterpart to the +FKS AT + command which is responsible to terminate a FAX session. + +*/ + +GLOBAL T_ACI_RETURN sAT_PlusFKS (T_ACI_CMD_SRC srcId) +{ + TRACE_FUNCTION ("sAT_PlusFKS()"); + + /* check command source */ + if(!cmh_IsVldCmdSrc (srcId) ) + { + ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); + return( AT_FAIL ); + } + cmhT30_StopFIT(); + + /* check entity status */ + if( t30EntStat.curCmd NEQ AT_CMD_NONE ) + return( AT_BUSY ); + + /* check for active call */ + if (!psaCC_ctbIsValid (t30ShrdPrm.cId)) + return( AT_CMPL ); + + t30EntStat.curCmd = AT_CMD_FKS; + t30EntStat.entOwn = srcId; + + /* disconnect T30 */ + psaT30_Disconnect( ); + + return( AT_EXCT ); +} + +/* ++-------------------------------------------------------------------+ +| PROJECT : GSM-PS (6147) MODULE : CMH_T30 | +| ROUTINE : cmhT30_Activate | ++-------------------------------------------------------------------+ + + PURPOSE : set all nescessary parameters and activate T30 + +*/ + +GLOBAL T_ACI_RETURN cmhT30_Activate ( T_ACI_CMD_SRC srcId, + T_ACI_AT_CMD cmdId, + SHORT cId ) +{ + TRACE_FUNCTION ("cmhT30_Activate()"); + + /* check command source */ + if(!cmh_IsVldCmdSrc (srcId)) + return( AT_FAIL ); + + /* check entity status */ + if( t30EntStat.curCmd NEQ AT_CMD_NONE ) + + return( AT_BUSY ); + + /* fill in activate parameters */ + t30ShrdPrm.trans_rate = cmhT30_SelChnRate(); + if( t30ShrdPrm.trans_rate EQ NOT_PRESENT_16BIT ) + return( AT_FAIL ); + + t30ShrdPrm.bitord = cmhT30_SelBitOrder( srcId ); + if( t30ShrdPrm.bitord EQ NOT_PRESENT_8BIT ) + return( AT_FAIL ); + + t30ShrdPrm.half_rate = cmhT30_SelHlfRate(); + t30ShrdPrm.threshold = T30_DEF_THLD; + t30ShrdPrm.frames_per_prim = T30_DEF_FRMPRIM; + t30ShrdPrm.hdlc_report = TRUE; + t30ShrdPrm.test_mode = 0; /* needed for simulation */ + + t30ShrdPrm.cId = cId; + t30EntStat.curCmd = cmdId; + t30EntStat.entOwn = srcId; + + FHSstat = FHS_STAT_NormEnd; /* reset call termination status */ + + psaT30_Activate( ); + return( AT_EXCT ); +} + +/* ++-------------------------------------------------------------------+ +| PROJECT : GSM-PS (6147) MODULE : CMH_T30 | +| ROUTINE : cmhT30_Deactivate | ++-------------------------------------------------------------------+ + + PURPOSE : set all nescessary parameters and deactivate T30 + +*/ + +GLOBAL T_ACI_RETURN cmhT30_Deactivate ( void ) +{ + UBYTE src_id = t30EntStat.entOwn; +#ifdef FF_PSI + T_ACI_DTI_PRC_PSI *src_infos = find_element (psi_src_params, + src_id, cmhPSItest_srcId); +#endif /*FF_PSI*/ + T_DTI_CNTRL info; + + TRACE_FUNCTION ("cmht30_Deactivate()"); + + + if (dti_cntrl_get_info_from_src_id( src_id, &info) EQ FALSE) + { + TRACE_EVENT_P1("cannot find info for src_id=%d", src_id); + return( AT_FAIL ); + } + + if (dti_cntrl_is_dti_channel_connected(DTI_ENTITY_T30, info.dti_id)) + { + T_DTI_ENTITY_ID entity_list[] = {DTI_ENTITY_ACI}; +#ifdef FF_PSI + if (src_infos NEQ NULL) + dti_cntrl_est_dpath_indirect ( src_id, + entity_list, + 1, + SPLIT, + atiPSI_dti_cb, + DTI_CPBLTY_CMD, + DTI_CID_NOTPRESENT); + else +#endif + dti_cntrl_est_dpath_indirect ( src_id, + entity_list, + 1, + SPLIT, + atiUART_dti_cb, + DTI_CPBLTY_CMD, + DTI_CID_NOTPRESENT); + + return( AT_EXCT ); + } + + /* reset parameters to initial value */ + cmhT30_RstNgtPrms(); /* reset negotiation parameter */ + + /* deactivate */ + psaT30_Deactivate( ); + return( AT_EXCT ); +} + +/* ++-------------------------------------------------------------------+ +| PROJECT : GSM-PS (6147) MODULE : CMH_T30 | +| ROUTINE : cmhT30_Modify | ++-------------------------------------------------------------------+ + + PURPOSE : set all nescessary parameters and modify T30 + +*/ + +GLOBAL T_ACI_RETURN cmhT30_Modify (void) +{ + TRACE_FUNCTION ("cmhT30_Modify()"); + + /* fill in modify parameters */ + t30ShrdPrm.trans_rate = cmhT30_SelUsrRate(); + if (t30ShrdPrm.trans_rate EQ NOT_PRESENT_16BIT) + { + t30ShrdPrm.trans_rate = cmhT30_SelChnRate(); + } + if (t30ShrdPrm.trans_rate EQ NOT_PRESENT_16BIT) + return (AT_FAIL); + + t30ShrdPrm.half_rate = cmhT30_SelHlfRate(); + + psaT30_Modify( ); + return( AT_EXCT ); +} + +/* ++-------------------------------------------------------------------+ +| PROJECT : GSM-PS (6147) MODULE : CMH_T30 | +| ROUTINE : cmhT30_SendCaps | ++-------------------------------------------------------------------+ + + PURPOSE : Send local DCE capability parameters + +*/ + +GLOBAL T_ACI_RETURN cmhT30_SendCaps ( T_ACI_CMD_SRC srcId, + T_T30_FRTP frmTyp ) +{ + T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */ + + TRACE_FUNCTION ("cmhT30_SendCaps()"); + +/* + *------------------------------------------------------------------- + * check command source + *------------------------------------------------------------------- + */ + if(!cmh_IsVldCmdSrc (srcId)) + + return( AT_FAIL ); + + pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm; + +/* + *------------------------------------------------------------------- + * build capability parameter + *------------------------------------------------------------------- + */ + t30ShrdPrm.hdlc_snd.crp = FALSE; + cmhT30_BuildSndFrm( srcId, frmTyp ); + + switch( frmTyp ) + { + /* + *--------------------------------------------------------------- + * for a DIS frame + *--------------------------------------------------------------- + */ + case( FRT_DIS ): + + t30ShrdPrm.hdlc_snd.v_dcs = t30ShrdPrm.hdlc_snd.v_dtc = FALSE; + t30ShrdPrm.hdlc_snd.c_nsc = t30ShrdPrm.hdlc_snd.c_nss = 0; + t30ShrdPrm.hdlc_snd.c_tsi = t30ShrdPrm.hdlc_snd.c_cig = 0; + + /* non-standard facility */ + t30ShrdPrm.hdlc_snd.c_nsf = pT30CmdPrm -> FNSlen; + + if (pT30CmdPrm -> FNSlen) + { + memcpy( t30ShrdPrm.hdlc_snd.nsf, pT30CmdPrm -> FNSoct, + pT30CmdPrm -> FNSlen); + } + + if( pT30CmdPrm -> FLIstr[0] NEQ 0 ) /* calling subscr. id */ + { + t30ShrdPrm.hdlc_snd.c_csi = strlen( pT30CmdPrm -> FLIstr ); + strncpy( (char *) t30ShrdPrm.hdlc_snd.csi, + (char *) pT30CmdPrm -> FLIstr, + t30ShrdPrm.hdlc_snd.c_csi ); + } + else + { + t30ShrdPrm.hdlc_snd.c_csi = 0; + } + break; + + /* + *--------------------------------------------------------------- + * for a DTC frame + *--------------------------------------------------------------- + */ + case( FRT_DTC ): + + t30ShrdPrm.hdlc_snd.v_dcs = t30ShrdPrm.hdlc_snd.v_dis = FALSE; + t30ShrdPrm.hdlc_snd.c_nsf = t30ShrdPrm.hdlc_snd.c_nss = 0; + t30ShrdPrm.hdlc_snd.c_tsi = t30ShrdPrm.hdlc_snd.c_csi = 0; + + /* non-standard facility */ + t30ShrdPrm.hdlc_snd.c_nsc = pT30CmdPrm -> FNSlen; + + if (pT30CmdPrm -> FNSlen) + { + memcpy( t30ShrdPrm.hdlc_snd.nsc, pT30CmdPrm -> FNSoct, + pT30CmdPrm -> FNSlen); + } + + if( pT30CmdPrm -> FPWpwd[0] NEQ 0 ) /* password string */ + { + t30ShrdPrm.hdlc_snd.c_pwd = strlen( pT30CmdPrm -> FPWpwd ); + strncpy( (char *) t30ShrdPrm.hdlc_snd.pwd, + (char *) pT30CmdPrm -> FPWpwd, + t30ShrdPrm.hdlc_snd.c_pwd ); + } + else + { + t30ShrdPrm.hdlc_snd.c_pwd = 0; + } + + if( pT30CmdPrm -> FPAsep[0] NEQ 0 ) /* selective polling string */ + { + t30ShrdPrm.hdlc_snd.c_sep = strlen( pT30CmdPrm -> FPAsep ); + strncpy( (char *) t30ShrdPrm.hdlc_snd.sep, + (char *) pT30CmdPrm -> FPAsep, + t30ShrdPrm.hdlc_snd.c_sep ); + } + else + { + t30ShrdPrm.hdlc_snd.c_sep = 0; + } + + if( pT30CmdPrm -> FPIstr[0] NEQ 0 ) /* calling subscr. id */ + { + t30ShrdPrm.hdlc_snd.c_cig = strlen( pT30CmdPrm -> FPIstr ); + strncpy( (char *) t30ShrdPrm.hdlc_snd.cig, + (char *) pT30CmdPrm -> FPIstr, + t30ShrdPrm.hdlc_snd.c_cig ); + } + else + { + t30ShrdPrm.hdlc_snd.c_cig = 0; + } + break; + + /* + *--------------------------------------------------------------- + * for a DCS frame + *--------------------------------------------------------------- + */ + case( FRT_DCS ): + + t30ShrdPrm.hdlc_snd.v_dis = t30ShrdPrm.hdlc_snd.v_dtc = FALSE; + t30ShrdPrm.hdlc_snd.c_nsc = t30ShrdPrm.hdlc_snd.c_nsf = 0; + t30ShrdPrm.hdlc_snd.c_csi = t30ShrdPrm.hdlc_snd.c_cig = 0; + + /* non-standard facility */ + t30ShrdPrm.hdlc_snd.c_nss = pT30CmdPrm -> FNSlen; + + if (pT30CmdPrm -> FNSlen) + { + memcpy( t30ShrdPrm.hdlc_snd.nss, pT30CmdPrm -> FNSoct, + pT30CmdPrm -> FNSlen); + } + + if( pT30CmdPrm -> FPWpwd[0] NEQ 0 ) /* password string */ + { + t30ShrdPrm.hdlc_snd.c_pwd = strlen( pT30CmdPrm -> FPWpwd ); + strncpy( (char *) t30ShrdPrm.hdlc_snd.pwd, + (char *) pT30CmdPrm -> FPWpwd, + t30ShrdPrm.hdlc_snd.c_pwd ); + } + else + { + t30ShrdPrm.hdlc_snd.c_pwd = 0; + } + + if( pT30CmdPrm -> FSAsub[0] NEQ 0 ) /* subaddress string */ + { + t30ShrdPrm.hdlc_snd.c_sub = strlen( pT30CmdPrm -> FSAsub ); + strncpy( (char *) t30ShrdPrm.hdlc_snd.sub, + (char *) pT30CmdPrm -> FSAsub, + t30ShrdPrm.hdlc_snd.c_sub ); + } + else + { + t30ShrdPrm.hdlc_snd.c_sub = 0; + } + + if( pT30CmdPrm -> FLIstr[0] NEQ 0 ) /* transmitting subscr. id */ + { + t30ShrdPrm.hdlc_snd.c_tsi = strlen( pT30CmdPrm -> FLIstr ); + strncpy( (char *) t30ShrdPrm.hdlc_snd.tsi, + (char *) pT30CmdPrm -> FLIstr, + t30ShrdPrm.hdlc_snd.c_tsi ); + } + else + { + t30ShrdPrm.hdlc_snd.c_tsi = 0; + } + break; + } + +/* + *------------------------------------------------------------------- + * send capability parameter + *------------------------------------------------------------------- + */ + psaT30_Capabilities( ); + +/* + *------------------------------------------------------------------- + * check for T30 modification + *------------------------------------------------------------------- + */ + if( frmTyp EQ FRT_DCS ) + { + if( cmhT30_Chk4TCHAdpt() ) + { + ccShrdPrm.datStat = DS_TCH_MDF; /* wait for TCH change */ + } + else + { + if( cmhT30_Modify() NEQ AT_EXCT ) + { + ccShrdPrm.datStat = DS_DSC_REQ; + cmhT30_Deactivate(); + } + } + } + return( AT_EXCT ); +} + + +/* ++-------------------------------------------------------------------+ +| PROJECT : GSM-PS (6147) MODULE : CMH_T30S | +| ROUTINE : cmhT30_PPMRcvd | ++-------------------------------------------------------------------+ + + PURPOSE : post page message was received + +*/ +/* does not seem to be called */ +#if 0 +GLOBAL void cmhT30_PPMRcvd ( UBYTE ppm ) +{ + TRACE_FUNCTION ("cmhT30_PPMRcvd()"); + + /* determine type of post page message */ + switch( ppm ) + { + case( SGN_MPS ): /* multi-page signal */ + case( SGN_EOP ): /* end of procedure */ + + t30ShrdPrm.faxStat = FS_SND_DOC; /* stay in send document */ + break; + + case( SGN_EOM ): + + /*--- no more doc available for polling if polled ---*/ + if( ccShrdPrm.ctb[t30ShrdPrm.cId].calType EQ CT_MTC ) + { + fnd_cmhPrm[t30EntStat.entOwn].t30CmdPrm.FLPval = FLP_VAL_NoPollDoc; + } + + t30ShrdPrm.faxStat = FS_DOC_TRF; /* switch to document transfered */ + break; + + default: + + return; + } + + /* send PPM to T.30 */ + t30ShrdPrm.sgn_snd = ppm; + + if( PRIRcvdFlg AND + fnd_cmhPrm[t30EntStat.entOwn].t30CmdPrm.FIEval EQ FIE_VAL_AcceptPRI) + + t30ShrdPrm.sgn_snd |= PRI_MRK; + + if( pageSentFlg EQ TRUE ) + { + if( psaT30_Ppm( ) < 0 ) /* T30 PPM request */ + { + TRACE_EVENT( "FATAL RETURN psaT30 in cmhT30_PPMRcvd" ); + } + } + else + + ppmPendFlg = TRUE; +} +#endif /* 0 */ + +/* ++-------------------------------------------------------------------+ +| PROJECT : GSM-PS (6147) MODULE : CMH_T30S | +| ROUTINE : cmhT30_PRIRcvd | ++-------------------------------------------------------------------+ + + PURPOSE : procedure interrupt message was received + +*/ + +GLOBAL void cmhT30_PRIRcvd ( void ) +{ + TRACE_FUNCTION ("cmhT30_PRIRcvd()"); + + PRIRcvdFlg = TRUE; +} + +/* ++-------------------------------------------------------------------+ +| PROJECT : GSM-PS (6147) MODULE : CMH_T30 | +| ROUTINE : cmhT30_FITTimeout | ++-------------------------------------------------------------------+ + + PURPOSE : handle FAX inactivity timeout + +*/ + +GLOBAL void cmhT30_FITTimeout ( void ) +{ + TRACE_FUNCTION( "cmhT30_FITTimeout()" ); + + if (!psaCC_ctbIsValid (t30ShrdPrm.cId)) + { + TRACE_ERROR ("t30ShrdPrm.cId invalid"); + return; + } + +/* + *------------------------------------------------------------------- + * notify CC to release the call + *------------------------------------------------------------------- + */ + t30ShrdPrm.faxStat = FS_IDL; + t30EntStat.curCmd = AT_CMD_NONE; + + cmhCC_T30_Failed(); + + if( fnd_cmhPrm[t30EntStat.entOwn].t30CmdPrm.FITact EQ FIT_ACT_OnHookRst ) + + fnd_cmhPrm[t30EntStat.entOwn].t30CmdPrm.FCLASSclass = FCLASS_CLASS_Data; +} +#endif /* DTI OR FF_FAX*/ +/*==== EOF ========================================================*/