diff g23m-aci/aci/cmh_t30s.c @ 0:75a11d740a02

initial import of gsm-fw from freecalypso-sw rev 1033:5ab737ac3ad7
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 09 Jun 2016 00:02:41 +0000
parents
children
line wrap: on
line diff
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/g23m-aci/aci/cmh_t30s.c	Thu Jun 09 00:02:41 2016 +0000
@@ -0,0 +1,2937 @@
+/*
++-----------------------------------------------------------------------------
+|  Project :  GSM-PS (6147)
+|  Modul   :  CMH_T30S
++-----------------------------------------------------------------------------
+|  Copyright 2002 Texas Instruments Berlin, AG
+|                 All rights reserved.
+|
+|                 This file is confidential and a trade secret of Texas
+|                 Instruments Berlin, AG
+|                 The receipt of or possession of this file does not convey
+|                 any rights to reproduce or disclose its contents or to
+|                 manufacture, use, or sell anything it may describe, in
+|                 whole, or in part, without the specific written consent of
+|                 Texas Instruments Berlin, AG.
++-----------------------------------------------------------------------------
+|  Purpose :  This module provides the set functions related to the
+|             protocol stack adapter for T30.
++-----------------------------------------------------------------------------
+*/
+
+#if defined (DTI) || defined (FF_FAX)
+ 
+#ifndef CMH_T30S_C
+#define CMH_T30S_C
+#endif
+
+#include "aci_all.h"
+/*==== INCLUDES ===================================================*/
+#include "aci_cmh.h"
+#include "ati_cmd.h"
+#include "aci_cmd.h"
+#include "dti.h"      /* functionality of the dti library */
+
+#include "dti_conn_mng.h"
+#include "dti_cntrl_mng.h"
+
+#include "aci_fd.h"
+#include "aci_io.h"
+#include "psa.h"
+#include "psa_t30.h"
+#include "psa_cc.h"
+#include "cmh.h"
+#include "cmh_t30.h"
+#include "cmh_cc.h"
+
+
+#include "cmh_ra.h"
+
+#include "psa_uart.h"
+#include "cmh_uart.h"
+#ifdef FF_PSI
+#include "psa_psi.h"
+#include "cmh_psi.h"
+#include "ati_src_psi.h"
+#endif /*FF_PSI*/
+
+/*==== CONSTANTS ==================================================*/
+
+#define T30_DEF_THLD    (90)    /* good page threshold in percent */
+
+#ifdef _SIMULATION_
+#define T30_DEF_FRMPRIM (3)     /* no. frames per primitive */
+#else
+#define T30_DEF_FRMPRIM (42)    /* no. frames per primitive */
+#endif
+
+/*==== EXPORT =====================================================*/
+
+/* remove after testing ??? */
+/* EXTERN void TST_getSimData(UBYTE *data, USHORT nomLen,
+                           USHORT *actLen, UBYTE *final); */
+
+/*==== VARIABLES ==================================================*/
+
+/*==== FUNCTIONS ==================================================*/
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30S                 |
+| STATE   : code                  ROUTINE : sAT_PlusFCLASS           |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the +FCLASS AT
+            command which is responsible to set the class mode.
+
+            <class_type>:   class mode.
+*/
+
+GLOBAL T_ACI_RETURN sAT_PlusFCLASS  ( T_ACI_CMD_SRC srcId,
+                                   T_ACI_FCLASS_CLASS class_type )
+{
+  T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */
+
+  TRACE_FUNCTION ("sAT_PlusFCLASS()");
+
+/*
+ *-------------------------------------------------------------------
+ * check command source
+ *-------------------------------------------------------------------
+ */
+  if(!cmh_IsVldCmdSrc (srcId))
+  {
+    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+    return( AT_FAIL );
+  }
+
+  pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm;
+
+/*
+ *-------------------------------------------------------------------
+ * stop FIT timer
+ *-------------------------------------------------------------------
+ */
+  cmhT30_StopFIT();
+
+/*
+ *-------------------------------------------------------------------
+ * process the class_type parameter
+ *-------------------------------------------------------------------
+ */
+  switch( class_type )
+  {
+    case( FCLASS_CLASS_NotPresent ):
+      break;
+
+    case( FCLASS_CLASS_Voice ):
+    case( FCLASS_CLASS_Data  ):
+    case( FCLASS_CLASS_Fax20 ):
+      pT30CmdPrm -> FCLASSclass = class_type;
+      break;
+
+    case( FCLASS_CLASS_Fax2  ):         /* not implemented */
+    default:
+
+      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+      return( AT_FAIL );
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * start FIT timer
+ *-------------------------------------------------------------------
+ */
+  cmhT30_StartFIT();
+
+  return( AT_CMPL );
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30S                 |
+| STATE   : code                  ROUTINE : sAT_PlusFCR              |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the +FCR AT
+            command which is responsible to set the receive
+            capability.
+
+            <value>:   receive capability.
+*/
+
+GLOBAL T_ACI_RETURN sAT_PlusFCR  ( T_ACI_CMD_SRC srcId,
+                                   T_ACI_FCR_VAL value )
+{
+  T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */
+
+  TRACE_FUNCTION ("sAT_PlusFCR()");
+
+/*
+ *-------------------------------------------------------------------
+ * check command source
+ *-------------------------------------------------------------------
+ */
+  if(!cmh_IsVldCmdSrc (srcId))
+  {
+    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+    return( AT_FAIL );
+  }
+
+  pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm;
+
+/*
+ *-------------------------------------------------------------------
+ * stop FIT timer
+ *-------------------------------------------------------------------
+ */
+  cmhT30_StopFIT();
+
+/*
+ *-------------------------------------------------------------------
+ * process the value parameter
+ *-------------------------------------------------------------------
+ */
+  switch( value )
+  {
+    case( FCR_VAL_NotPresent ):
+      break;
+
+    case( FCR_VAL_NoRcvCap ):
+    case( FCR_VAL_RcvCap  ):
+      pT30CmdPrm -> FCRval = value;
+      break;
+
+    default:
+
+      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+      return( AT_FAIL );
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * start FIT timer
+ *-------------------------------------------------------------------
+ */
+  cmhT30_StartFIT();
+
+  return( AT_CMPL );
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30S                 |
+| STATE   : code                  ROUTINE : sAT_PlusFLI              |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the +FLI AT
+            command which is responsible to set the local id string
+            (CSI/TSI).
+
+            <idStr>:   local id string(0 terminated).
+*/
+
+GLOBAL T_ACI_RETURN sAT_PlusFLI  ( T_ACI_CMD_SRC srcId,
+                                   CHAR * idStr )
+{
+  T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */
+
+  TRACE_FUNCTION ("sAT_PlusFLI()");
+
+/*
+ *-------------------------------------------------------------------
+ * check command source
+ *-------------------------------------------------------------------
+ */
+  if(!cmh_IsVldCmdSrc (srcId))
+  {
+    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+    return( AT_FAIL );
+  }
+
+  pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm;
+
+/*
+ *-------------------------------------------------------------------
+ * stop FIT timer
+ *-------------------------------------------------------------------
+ */
+  cmhT30_StopFIT();
+
+/*
+ *-------------------------------------------------------------------
+ * process the idStr parameter
+ *-------------------------------------------------------------------
+ */
+  if( ! idStr )
+  {
+    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+    return( AT_FAIL );
+  }
+
+  strncpy( pT30CmdPrm -> FLIstr, idStr, MAX_ID_CHAR-1 );
+  pT30CmdPrm -> FLIstr[MAX_ID_CHAR-1] = 0;
+
+/*
+ *-------------------------------------------------------------------
+ * start FIT timer
+ *-------------------------------------------------------------------
+ */
+  cmhT30_StartFIT();
+
+  return( AT_CMPL );
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30S                 |
+| STATE   : code                  ROUTINE : sAT_PlusFPI              |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the +FPI AT
+            command which is responsible to set the local id string
+            (CGI).
+
+            <idStr>:   local id string(0 terminated).
+*/
+
+GLOBAL T_ACI_RETURN sAT_PlusFPI  ( T_ACI_CMD_SRC srcId,
+                                   CHAR * idStr )
+{
+  T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */
+
+  TRACE_FUNCTION ("sAT_PlusFPI()");
+
+/*
+ *-------------------------------------------------------------------
+ * check command source
+ *-------------------------------------------------------------------
+ */
+  if(!cmh_IsVldCmdSrc (srcId))
+  {
+    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+    return( AT_FAIL );
+  }
+
+  pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm;
+
+/*
+ *-------------------------------------------------------------------
+ * stop FIT timer
+ *-------------------------------------------------------------------
+ */
+  cmhT30_StopFIT();
+
+/*
+ *-------------------------------------------------------------------
+ * process the idStr parameter
+ *-------------------------------------------------------------------
+ */
+  if( ! idStr )
+  {
+    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+    return( AT_FAIL );
+  }
+
+  strncpy( pT30CmdPrm -> FPIstr, idStr, MAX_ID_CHAR-1 );
+  pT30CmdPrm -> FPIstr[MAX_ID_CHAR-1] = 0;
+
+/*
+ *-------------------------------------------------------------------
+ * start FIT timer
+ *-------------------------------------------------------------------
+ */
+  cmhT30_StartFIT();
+
+  return( AT_CMPL );
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30S                 |
+| STATE   : code                  ROUTINE : sAT_PlusFSA              |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the +FSA AT
+            command which is responsible to set the destination
+            subaddress string
+
+            <subStr>:   destination subaddress string(0 terminated).
+*/
+
+GLOBAL T_ACI_RETURN sAT_PlusFSA  ( T_ACI_CMD_SRC srcId,
+                                   CHAR * subStr )
+{
+  T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */
+
+  TRACE_FUNCTION ("sAT_PlusFSA()");
+
+/*
+ *-------------------------------------------------------------------
+ * check command source
+ *-------------------------------------------------------------------
+ */
+  if(!cmh_IsVldCmdSrc (srcId))
+  {
+    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+    return( AT_FAIL );
+  }
+
+  pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm;
+
+/*
+ *-------------------------------------------------------------------
+ * stop FIT timer
+ *-------------------------------------------------------------------
+ */
+  cmhT30_StopFIT();
+
+/*
+ *-------------------------------------------------------------------
+ * process the idStr parameter
+ *-------------------------------------------------------------------
+ */
+  if( ! subStr )
+  {
+    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+    return( AT_FAIL );
+  }
+
+  strncpy( pT30CmdPrm -> FSAsub, subStr, MAX_ID_CHAR-1 );
+  pT30CmdPrm -> FSAsub[MAX_ID_CHAR-1] = 0;
+
+/*
+ *-------------------------------------------------------------------
+ * start FIT timer
+ *-------------------------------------------------------------------
+ */
+  cmhT30_StartFIT();
+
+  return( AT_CMPL );
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30S                 |
+| STATE   : code                  ROUTINE : sAT_PlusFPA              |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the +FPA AT
+            command which is responsible to set the selective polling
+            address string.
+
+            <sepStr>:   selective polling address string(0 terminated).
+*/
+
+GLOBAL T_ACI_RETURN sAT_PlusFPA  ( T_ACI_CMD_SRC srcId,
+                                   CHAR * sepStr )
+{
+  T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */
+
+  TRACE_FUNCTION ("sAT_PlusFPA()");
+
+/*
+ *-------------------------------------------------------------------
+ * check command source
+ *-------------------------------------------------------------------
+ */
+  if(!cmh_IsVldCmdSrc (srcId))
+  {
+    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+    return( AT_FAIL );
+  }
+
+  pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm;
+
+/*
+ *-------------------------------------------------------------------
+ * stop FIT timer
+ *-------------------------------------------------------------------
+ */
+  cmhT30_StopFIT();
+
+/*
+ *-------------------------------------------------------------------
+ * process the idStr parameter
+ *-------------------------------------------------------------------
+ */
+  if( ! sepStr )
+  {
+    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+    return( AT_FAIL );
+  }
+
+  strncpy( pT30CmdPrm -> FPAsep, sepStr, MAX_ID_CHAR-1 );
+  pT30CmdPrm -> FPAsep[MAX_ID_CHAR-1] = 0;
+
+/*
+ *-------------------------------------------------------------------
+ * start FIT timer
+ *-------------------------------------------------------------------
+ */
+  cmhT30_StartFIT();
+
+  return( AT_CMPL );
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30S                 |
+| STATE   : code                  ROUTINE : sAT_PlusFPW              |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the +FPW AT
+            command which is responsible to set the password string.
+
+            <pwdStr>:   password string(0 terminated).
+*/
+
+GLOBAL T_ACI_RETURN sAT_PlusFPW  ( T_ACI_CMD_SRC srcId,
+                                   CHAR * pwdStr )
+{
+  T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */
+
+  TRACE_FUNCTION ("sAT_PlusFPW()");
+
+/*
+ *-------------------------------------------------------------------
+ * check command source
+ *-------------------------------------------------------------------
+ */
+  if(!cmh_IsVldCmdSrc (srcId))
+  {
+    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+    return( AT_FAIL );
+  }
+
+  pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm;
+
+/*
+ *-------------------------------------------------------------------
+ * stop FIT timer
+ *-------------------------------------------------------------------
+ */
+  cmhT30_StopFIT();
+
+/*
+ *-------------------------------------------------------------------
+ * process the idStr parameter
+ *-------------------------------------------------------------------
+ */
+  if( ! pwdStr )
+  {
+    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+    return( AT_FAIL );
+  }
+
+  strncpy( pT30CmdPrm -> FPWpwd, pwdStr, MAX_ID_CHAR-1 );
+  pT30CmdPrm -> FPWpwd[MAX_ID_CHAR-1] = 0;
+
+/*
+ *-------------------------------------------------------------------
+ * start FIT timer
+ *-------------------------------------------------------------------
+ */
+  cmhT30_StartFIT();
+
+  return( AT_CMPL );
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30S                 |
+| STATE   : code                  ROUTINE : sAT_PlusFCC              |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the +FCC AT
+            command which is responsible to set the DCE capabilities.
+
+            <vr>:   resolution.
+            <br>:   bit rate.
+            <wd>:   page width.
+            <ln>:   page length.
+            <df>:   data compression.
+            <ec>:   error correction.
+            <bt>:   file transer.
+            <st>:   scan time.
+            <jp>:   JPEG mode.
+*/
+
+GLOBAL T_ACI_RETURN sAT_PlusFCC  ( T_ACI_CMD_SRC srcId, T_ACI_F_VR vr,
+                                   T_ACI_F_BR br, T_ACI_F_WD wd,
+                                   T_ACI_F_LN ln, T_ACI_F_DF df,
+                                   T_ACI_F_EC ec, T_ACI_F_BF bf,
+                                   T_ACI_F_ST st, T_ACI_F_JP jp )
+{
+  T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */
+
+  TRACE_FUNCTION ("sAT_PlusFCC()");
+
+/*
+ *-------------------------------------------------------------------
+ * check command source
+ *-------------------------------------------------------------------
+ */
+  if(!cmh_IsVldCmdSrc (srcId))
+  {
+    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+    return( AT_FAIL );
+  }
+
+  pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm;
+
+/*
+ *-------------------------------------------------------------------
+ * stop FIT timer
+ *-------------------------------------------------------------------
+ */
+  cmhT30_StopFIT();
+
+/*
+ *-------------------------------------------------------------------
+ * process the vr parameter
+ *-------------------------------------------------------------------
+ */
+  switch (vr)
+  {
+  case F_VR_NotPresent:
+    vr = pT30CmdPrm -> FCCvr;
+    break;
+
+  case F_VR_R8X3_85:
+  case F_VR_R8X7_7:
+  case F_VR_R8X15_4:
+  case F_VR_R16X15_4:
+  case F_VR_200X100:
+  case F_VR_200X200:
+  case F_VR_200X400:
+  case F_VR_300X300:
+    break;
+
+  default:
+    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+    return AT_FAIL;
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * process the br parameter
+ *-------------------------------------------------------------------
+ */
+  switch( br )
+  {
+    case( F_BR_NotPresent ):
+
+      br = pT30CmdPrm -> FCCbr;
+      break;
+
+    case( F_BR_2400  ):
+    case( F_BR_4800  ):
+    case( F_BR_7200  ):
+    case( F_BR_9600  ):
+    case( F_BR_12000 ):
+    case( F_BR_14400 ):
+
+      break;
+
+    default:
+
+      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+      return( AT_FAIL );
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * process the wd parameter
+ *-------------------------------------------------------------------
+ */
+  switch( wd )
+  {
+    case( F_WD_NotPresent ):
+
+      wd = pT30CmdPrm -> FCCwd;
+      break;
+
+    case( F_WD_1728  ):
+    case( F_WD_2048  ):
+    case( F_WD_2432  ):
+    case( F_WD_1216  ):
+    case( F_WD_864 ):
+
+      break;
+
+    default:
+
+      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+      return( AT_FAIL );
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * process the ln parameter
+ *-------------------------------------------------------------------
+ */
+  switch( ln )
+  {
+    case( F_LN_NotPresent ):
+
+      ln = pT30CmdPrm -> FCCln;
+      break;
+
+    case( F_LN_A4  ):
+    case( F_LN_B4  ):
+    case( F_LN_Unlimited  ):
+
+      break;
+
+    default:
+
+      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+      return( AT_FAIL );
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * process the df parameter
+ *-------------------------------------------------------------------
+ */
+  switch( df )
+  {
+    case( F_DF_NotPresent ):
+
+      df = pT30CmdPrm -> FCCdf;
+      break;
+
+    case( F_DF_1D_MdfHuff  ):
+
+      break;
+
+    case( F_DF_2D_MdfRd_T4 ):       /* not implemented */
+    case( F_DF_2D_Uncomp   ):       /* not implemented */
+    case( F_DF_2D_MdfRd_T6 ):       /* not implemented */
+    default:
+
+      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+      return( AT_FAIL );
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * process the ec parameter
+ *-------------------------------------------------------------------
+ */
+  switch( ec )
+  {
+    case( F_EC_NotPresent ):
+
+      ec = pT30CmdPrm -> FCCec;
+      break;
+
+    case( F_EC_DisableECM  ):
+
+      break;
+
+    case( F_EC_EnableECM     ):       /* not implemented */
+    case( F_EC_EnableHalfDup ):       /* not implemented */
+    case( F_EC_EnableFullDup ):       /* not implemented */
+    default:
+
+      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+      return( AT_FAIL );
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * process the bf parameter
+ *-------------------------------------------------------------------
+ */
+  if( bf NEQ F_BF_NotPresent )
+  {
+    if( bf > F_BF_DisableFileTrnsf )  /* others are not implemented */
+    {
+      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+      return( AT_FAIL );
+    }
+  }
+  else
+
+    bf = pT30CmdPrm -> FCCbf;
+
+/*
+ *-------------------------------------------------------------------
+ * process the st parameter
+ *-------------------------------------------------------------------
+ */
+  switch( st )
+  {
+    case( F_ST_NotPresent ):
+
+      st = pT30CmdPrm -> FCCst;
+      break;
+
+    case( F_ST_0_0   ):
+    case( F_ST_5_5   ):
+    case( F_ST_10_5  ):
+    case( F_ST_10_10 ):
+    case( F_ST_20_10 ):
+    case( F_ST_20_20 ):
+    case( F_ST_40_20 ):
+    case( F_ST_40_40 ):
+
+      break;
+
+    default:
+
+      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+      return( AT_FAIL );
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * process the jp parameter
+ *-------------------------------------------------------------------
+ */
+  if( jp NEQ F_JP_NotPresent )
+  {
+    if( jp > F_JP_DisableJPEG )       /* others are not implemented */
+    {
+      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+      return( AT_FAIL );
+    }
+  }
+  else
+
+    jp = pT30CmdPrm -> FCCjp;
+
+
+/*
+ *-------------------------------------------------------------------
+ * assign the parameters
+ *-------------------------------------------------------------------
+ */
+  pT30CmdPrm -> FCCvr = pT30CmdPrm -> FISvr = vr;
+  pT30CmdPrm -> FCCbr = pT30CmdPrm -> FISbr = br;
+  pT30CmdPrm -> FCCwd = pT30CmdPrm -> FISwd = wd;
+  pT30CmdPrm -> FCCln = pT30CmdPrm -> FISln = ln;
+  pT30CmdPrm -> FCCdf = pT30CmdPrm -> FISdf = df;
+  pT30CmdPrm -> FCCec = pT30CmdPrm -> FISec = ec;
+  pT30CmdPrm -> FCCbf = pT30CmdPrm -> FISbf = bf;
+  pT30CmdPrm -> FCCst = pT30CmdPrm -> FISst = st;
+  pT30CmdPrm -> FCCjp = pT30CmdPrm -> FISjp = jp;
+
+
+/*
+ *-------------------------------------------------------------------
+ * start FIT timer
+ *-------------------------------------------------------------------
+ */
+  cmhT30_StartFIT();
+
+  return( AT_CMPL );
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30S                 |
+| STATE   : code                  ROUTINE : sAT_PlusFIS              |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the +FIS AT
+            command which is responsible to set the current session
+            capabilities.
+
+            <vr>:   resolution.
+            <br>:   bit rate.
+            <wd>:   page width.
+            <ln>:   page length.
+            <df>:   data compression.
+            <ec>:   error correction.
+            <bt>:   file transer.
+            <st>:   scan time.
+            <jp>:   JPEG mode.
+*/
+
+GLOBAL T_ACI_RETURN sAT_PlusFIS  ( T_ACI_CMD_SRC srcId, T_ACI_F_VR vr,
+                                   T_ACI_F_BR br, T_ACI_F_WD wd,
+                                   T_ACI_F_LN ln, T_ACI_F_DF df,
+                                   T_ACI_F_EC ec, T_ACI_F_BF bf,
+                                   T_ACI_F_ST st, T_ACI_F_JP jp )
+{
+  T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */
+
+  TRACE_FUNCTION ("sAT_PlusFIS()");
+
+/*
+ *-------------------------------------------------------------------
+ * check command source
+ *-------------------------------------------------------------------
+ */
+  if(!cmh_IsVldCmdSrc (srcId))
+  {
+    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+    return( AT_FAIL );
+  }
+
+  pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm;
+
+/*
+ *-------------------------------------------------------------------
+ * stop FIT timer
+ *-------------------------------------------------------------------
+ */
+  cmhT30_StopFIT();
+
+/*
+ *-------------------------------------------------------------------
+ * process the vr parameter
+ *-------------------------------------------------------------------
+ */
+  switch (vr)
+  {
+  case F_VR_NotPresent:
+    vr = pT30CmdPrm -> FISvr;
+    break;
+
+  case F_VR_R8X3_85:
+  case F_VR_R8X7_7:
+  case F_VR_R8X15_4:
+  case F_VR_R16X15_4:
+  case F_VR_200X100:
+  case F_VR_200X200:
+  case F_VR_200X400:
+  case F_VR_300X300:
+    break;
+
+  default:
+    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+    return AT_FAIL;
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * process the br parameter
+ *-------------------------------------------------------------------
+ */
+  switch( br )
+  {
+    case( F_BR_NotPresent ):
+
+      br = pT30CmdPrm -> FISbr;
+      break;
+
+    case( F_BR_2400  ):
+    case( F_BR_4800  ):
+    case( F_BR_7200  ):
+    case( F_BR_9600  ):
+    case( F_BR_12000 ):
+    case( F_BR_14400 ):
+
+      break;
+
+    default:
+
+      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+      return( AT_FAIL );
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * process the wd parameter
+ *-------------------------------------------------------------------
+ */
+  switch( wd )
+  {
+    case( F_WD_NotPresent ):
+
+      wd = pT30CmdPrm -> FISwd;
+      break;
+
+    case( F_WD_1728  ):
+    case( F_WD_2048  ):
+    case( F_WD_2432  ):
+    case( F_WD_1216  ):
+    case( F_WD_864 ):
+
+      break;
+
+    default:
+
+      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+      return( AT_FAIL );
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * process the ln parameter
+ *-------------------------------------------------------------------
+ */
+  switch( ln )
+  {
+    case( F_LN_NotPresent ):
+
+      ln = pT30CmdPrm -> FISln;
+      break;
+
+    case( F_LN_A4  ):
+    case( F_LN_B4  ):
+    case( F_LN_Unlimited  ):
+
+      break;
+
+    default:
+
+      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+      return( AT_FAIL );
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * process the df parameter
+ *-------------------------------------------------------------------
+ */
+  switch( df )
+  {
+    case( F_DF_NotPresent ):
+
+      df = pT30CmdPrm -> FISdf;
+      break;
+
+    case( F_DF_1D_MdfHuff  ):
+
+      break;
+
+    case( F_DF_2D_MdfRd_T4 ):       /* not implemented */
+    case( F_DF_2D_Uncomp   ):       /* not implemented */
+    case( F_DF_2D_MdfRd_T6 ):       /* not implemented */
+    default:
+
+      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+      return( AT_FAIL );
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * process the ec parameter
+ *-------------------------------------------------------------------
+ */
+  switch( ec )
+  {
+    case( F_EC_NotPresent ):
+
+      ec = pT30CmdPrm -> FISec;
+      break;
+
+    case( F_EC_DisableECM  ):
+
+      break;
+
+    case( F_EC_EnableECM     ):       /* not implemented */
+    case( F_EC_EnableHalfDup ):       /* not implemented */
+    case( F_EC_EnableFullDup ):       /* not implemented */
+    default:
+
+      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+      return( AT_FAIL );
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * process the bf parameter
+ *-------------------------------------------------------------------
+ */
+  if( bf NEQ F_BF_NotPresent )
+  {
+    if( bf > F_BF_DisableFileTrnsf )  /* others are not implemented */
+    {
+      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+      return( AT_FAIL );
+    }
+  }
+  else
+
+    bf = pT30CmdPrm -> FISbf;
+
+/*
+ *-------------------------------------------------------------------
+ * process the st parameter
+ *-------------------------------------------------------------------
+ */
+  switch( st )
+  {
+    case( F_ST_NotPresent ):
+
+      st = pT30CmdPrm -> FISst;
+      break;
+
+    case( F_ST_0_0   ):
+    case( F_ST_5_5   ):
+    case( F_ST_10_5  ):
+    case( F_ST_10_10 ):
+    case( F_ST_20_10 ):
+    case( F_ST_20_20 ):
+    case( F_ST_40_20 ):
+    case( F_ST_40_40 ):
+
+      break;
+
+    default:
+
+      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+      return( AT_FAIL );
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * process the jp parameter
+ *-------------------------------------------------------------------
+ */
+  if( jp NEQ F_JP_NotPresent )
+  {
+    if( jp > F_JP_DisableJPEG )       /* others are not implemented */
+    {
+      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+      return( AT_FAIL );
+    }
+  }
+  else
+
+    jp = pT30CmdPrm -> FISjp;
+
+/*
+ *-------------------------------------------------------------------
+ * assign the parameters
+ *-------------------------------------------------------------------
+ */
+  pT30CmdPrm -> FISvr = vr;
+  pT30CmdPrm -> FISbr = br;
+  pT30CmdPrm -> FISwd = wd;
+  pT30CmdPrm -> FISln = ln;
+  pT30CmdPrm -> FISdf = df;
+  pT30CmdPrm -> FISec = ec;
+  pT30CmdPrm -> FISbf = bf;
+  pT30CmdPrm -> FISst = st;
+  pT30CmdPrm -> FISjp = jp;
+
+/*
+ *-------------------------------------------------------------------
+ * start FIT timer
+ *-------------------------------------------------------------------
+ */
+  cmhT30_StartFIT();
+
+  return( AT_CMPL );
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30S                 |
+| STATE   : code                  ROUTINE : sAT_PlusFNS              |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the +FNS AT
+            command which is responsible to set the string for
+            non-standard facilities.
+
+            <len>:   length of nsf string.
+            <nsf>:   nsf octed string.
+*/
+
+GLOBAL T_ACI_RETURN sAT_PlusFNS  ( T_ACI_CMD_SRC srcId,
+                                   UBYTE len,
+                                   UBYTE * nsf )
+{
+  T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */
+
+  TRACE_FUNCTION ("sAT_PlusFNS()");
+
+/*
+ *-------------------------------------------------------------------
+ * check command source
+ *-------------------------------------------------------------------
+ */
+  if(!cmh_IsVldCmdSrc (srcId))
+  {
+    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+    return( AT_FAIL );
+  }
+
+  pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm;
+
+/*
+ *-------------------------------------------------------------------
+ * stop FIT timer
+ *-------------------------------------------------------------------
+ */
+  cmhT30_StopFIT();
+
+/*
+ *-------------------------------------------------------------------
+ * process the len and nsf parameter
+ *-------------------------------------------------------------------
+ */
+  if((len > 0 AND ! nsf) OR len > MAX_NSF_BYTE )
+  {
+    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+    return( AT_FAIL );
+  }
+
+  if( len EQ 0 )
+  {
+    pT30CmdPrm -> FNSlen = 0;
+  }
+  else
+  {
+    if (MINIMUM(MAX_NSF_BYTE - pT30CmdPrm -> FNSlen, len))
+    {
+      memcpy( &pT30CmdPrm -> FNSoct[pT30CmdPrm -> FNSlen], nsf,
+              MINIMUM(MAX_NSF_BYTE - pT30CmdPrm -> FNSlen, len) );
+    }
+
+    pT30CmdPrm -> FNSlen +=
+                  MINIMUM(MAX_NSF_BYTE - pT30CmdPrm -> FNSlen, len);
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * start FIT timer
+ *-------------------------------------------------------------------
+ */
+  cmhT30_StartFIT();
+
+  return( AT_CMPL );
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30S                 |
+| STATE   : code                  ROUTINE : sAT_PlusFLP              |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the +FLP AT
+            command which is responsible to indicate a document for
+            polling.
+
+            <value>: polling indication.
+*/
+
+GLOBAL T_ACI_RETURN sAT_PlusFLP   (T_ACI_CMD_SRC srcId,
+                                   T_ACI_FLP_VAL value )
+{
+  T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */
+
+  TRACE_FUNCTION ("sAT_PlusFLP()");
+
+/*
+ *-------------------------------------------------------------------
+ * check command source
+ *-------------------------------------------------------------------
+ */
+  if(!cmh_IsVldCmdSrc (srcId))
+  {
+    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+    return( AT_FAIL );
+  }
+
+  pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm;
+
+/*
+ *-------------------------------------------------------------------
+ * stop FIT timer
+ *-------------------------------------------------------------------
+ */
+  cmhT30_StopFIT();
+
+/*
+ *-------------------------------------------------------------------
+ * process the value parameter
+ *-------------------------------------------------------------------
+ */
+  switch( value )
+  {
+    case( FLP_VAL_NotPresent ):
+
+      break;
+
+    case( FLP_VAL_NoPollDoc  ):
+    case( FLP_VAL_PollDoc    ):
+
+      pT30CmdPrm -> FLPval = value;
+      break;
+
+    default:
+
+      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+      return( AT_FAIL );
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * start FIT timer
+ *-------------------------------------------------------------------
+ */
+  cmhT30_StartFIT();
+
+  return( AT_CMPL );
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30S                 |
+| STATE   : code                  ROUTINE : sAT_PlusFIE              |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the +FIE AT
+            command which is responsible to enable procedure interrupts.
+
+            <value>: PI mode.
+*/
+
+GLOBAL T_ACI_RETURN sAT_PlusFIE   (T_ACI_CMD_SRC srcId,
+                                   T_ACI_FIE_VAL value )
+{
+  T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */
+
+  TRACE_FUNCTION ("sAT_PlusFIE()");
+
+/*
+ *-------------------------------------------------------------------
+ * check command source
+ *-------------------------------------------------------------------
+ */
+  if(!cmh_IsVldCmdSrc (srcId))
+  {
+    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+    return( AT_FAIL );
+  }
+
+  pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm;
+
+/*
+ *-------------------------------------------------------------------
+ * stop FIT timer
+ *-------------------------------------------------------------------
+ */
+  cmhT30_StopFIT();
+
+/*
+ *-------------------------------------------------------------------
+ * process the value parameter
+ *-------------------------------------------------------------------
+ */
+  switch( value )
+  {
+    case( FIE_VAL_NotPresent ):
+
+      break;
+
+    case( FIE_VAL_IgnorePRI ):
+    case( FIE_VAL_AcceptPRI ):
+
+      pT30CmdPrm -> FIEval = value;
+      break;
+
+    default:
+
+      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+      return( AT_FAIL );
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * start FIT timer
+ *-------------------------------------------------------------------
+ */
+  cmhT30_StartFIT();
+
+  return( AT_CMPL );
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30S                 |
+| STATE   : code                  ROUTINE : sAT_PlusFCQ              |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the +FCQ AT
+            command which is responsible to set the copy quality
+            checking.
+
+            <rq>: receive quality.
+            <tq>: transmit quality.
+*/
+
+GLOBAL T_ACI_RETURN sAT_PlusFCQ   (T_ACI_CMD_SRC srcId,
+                                   T_ACI_FCQ_RQ  rq,
+                                                 T_ACI_FCQ_TQ  tq )
+{
+  T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */
+
+  TRACE_FUNCTION ("sAT_PlusFCQ()");
+
+/*
+ *-------------------------------------------------------------------
+ * check command source
+ *-------------------------------------------------------------------
+ */
+  if(!cmh_IsVldCmdSrc (srcId))
+  {
+    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+    return( AT_FAIL );
+  }
+
+  pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm;
+
+/*
+ *-------------------------------------------------------------------
+ * stop FIT timer
+ *-------------------------------------------------------------------
+ */
+  cmhT30_StopFIT();
+
+/*
+ *-------------------------------------------------------------------
+ * process the rq parameter
+ *-------------------------------------------------------------------
+ */
+  switch( rq )
+  {
+    case( FCQ_RQ_NotPresent ):
+
+      rq = pT30CmdPrm -> FCQrq;
+      break;
+
+    case( FCQ_RQ_CQCDisabled ):
+    case( FCQ_RQ_CQCEnabled  ):
+
+      break;
+
+    case( FCQ_RQ_CQCandCorrection ):
+    default:
+
+      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+      return( AT_FAIL );
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * process the tq parameter
+ *-------------------------------------------------------------------
+ */
+  switch( tq )
+  {
+    case( FCQ_TQ_NotPresent ):
+    case( FCQ_TQ_CQCDisabled ):
+
+      break;
+
+    case( FCQ_TQ_CQCEnabled  ):
+    case( FCQ_TQ_CQCandCorrection ):
+    default:
+
+      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+      return( AT_FAIL );
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * assign the parameters
+ *-------------------------------------------------------------------
+ */
+  pT30CmdPrm -> FCQrq = rq;
+
+/*
+ *-------------------------------------------------------------------
+ * start FIT timer
+ *-------------------------------------------------------------------
+ */
+  cmhT30_StartFIT();
+
+  return( AT_CMPL );
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30S                 |
+| STATE   : code                  ROUTINE : sAT_PlusFIT              |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the +FIT AT
+            command which is responsible to set the inactivity timeout.
+
+            <time>: inactivity timeout.
+            <act> : action.
+*/
+
+GLOBAL T_ACI_RETURN sAT_PlusFIT   (T_ACI_CMD_SRC        srcId,
+                                   SHORT                time,
+                                   T_ACI_FIT_ACT        act )
+{
+  T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */
+
+  TRACE_FUNCTION ("sAT_PlusFIT()");
+
+/*
+ *-------------------------------------------------------------------
+ * check command source
+ *-------------------------------------------------------------------
+ */
+  if(!cmh_IsVldCmdSrc (srcId))
+  {
+    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+    return( AT_FAIL );
+  }
+
+  pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm;
+
+/*
+ *-------------------------------------------------------------------
+ * stop FIT timer
+ *-------------------------------------------------------------------
+ */
+  cmhT30_StopFIT();
+
+/*
+ *-------------------------------------------------------------------
+ * process the act parameter
+ *-------------------------------------------------------------------
+ */
+  switch( act )
+  {
+    case( FIT_ACT_NotPresent ):
+
+      act = pT30CmdPrm -> FITact;
+      break;
+
+    case( FIT_ACT_OnHookRst ):
+    case( FIT_ACT_OnHook    ):
+
+      break;
+
+    default:
+
+      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+      return( AT_FAIL );
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * process the time parameter
+ *-------------------------------------------------------------------
+ */
+  if( time > 255 )
+  {
+    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+    return( AT_FAIL );
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * assign the parameters
+ *-------------------------------------------------------------------
+ */
+  pT30CmdPrm -> FITact = act;
+
+  if( time NEQ ACI_NumParmNotPresent )
+  {
+    pT30CmdPrm -> FITtime =  time * 1000;
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * start FIT timer
+ *-------------------------------------------------------------------
+ */
+  cmhT30_StartFIT();
+
+  return( AT_CMPL );
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30S                 |
+| STATE   : code                  ROUTINE : sAT_PlusFBO              |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the +FBO AT
+            command which is responsible to set data bit order.
+
+            <value>: data bit order.
+*/
+
+GLOBAL T_ACI_RETURN sAT_PlusFBO   (T_ACI_CMD_SRC        srcId,
+                                   T_ACI_FBO_VAL        value )
+{
+  T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */
+
+  TRACE_FUNCTION ("sAT_PlusFBO()");
+
+/*
+ *-------------------------------------------------------------------
+ * check command source
+ *-------------------------------------------------------------------
+ */
+  if(!cmh_IsVldCmdSrc (srcId))
+  {
+    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+    return( AT_FAIL );
+  }
+
+  pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm;
+
+/*
+ *-------------------------------------------------------------------
+ * stop FIT timer
+ *-------------------------------------------------------------------
+ */
+  cmhT30_StopFIT();
+
+/*
+ *-------------------------------------------------------------------
+ * process the value parameter
+ *-------------------------------------------------------------------
+ */
+  switch( value )
+  {
+    case( FBO_VAL_NotPresent ):
+
+      value = pT30CmdPrm -> FBOval;
+      break;
+
+    case( FBO_VAL_DirCDirBD ):
+    case( FBO_VAL_RvrCDirBD ):
+    case( FBO_VAL_DirCRvrBD ):
+    case( FBO_VAL_RvrCRvrBD ):
+
+      break;
+
+    default:
+
+      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+      return( AT_FAIL );
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * assign the parameters
+ *-------------------------------------------------------------------
+ */
+  pT30CmdPrm -> FBOval = value;
+
+/*
+ *-------------------------------------------------------------------
+ * start FIT timer
+ *-------------------------------------------------------------------
+ */
+  cmhT30_StartFIT();
+
+  return( AT_CMPL );
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30S                 |
+| STATE   : code                  ROUTINE : sAT_PlusFRQ              |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the +FRQ AT
+            command which is responsible to set the receive quality
+            thresholds.
+
+            <pgl>: percentage of good lines.
+            <cbl>: consecutive bad lines.
+*/
+
+GLOBAL T_ACI_RETURN sAT_PlusFRQ   (T_ACI_CMD_SRC srcId,
+                                   SHORT pgl,
+                                   SHORT cbl )
+{
+  TRACE_FUNCTION ("sAT_PlusFRQ()");
+
+  /* process the pgl parameter */
+  if( pgl NEQ 0 )
+  {
+    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+    return( AT_FAIL );
+  }
+
+  /* process the cbl parameter */
+  if( cbl NEQ 0 )
+  {
+    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+    return( AT_FAIL );
+  }
+
+  /* start FIT timer */
+  cmhT30_StartFIT();
+
+  return( AT_CMPL );
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30S                 |
+| STATE   : code                  ROUTINE : sAT_PlusFEA              |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the +FEA AT
+            command which is responsible to set phase C EOL alignment.
+
+            <value>: alignment.
+*/
+
+GLOBAL T_ACI_RETURN sAT_PlusFEA   (T_ACI_CMD_SRC srcId,
+                                   SHORT value )
+{
+
+  TRACE_FUNCTION ("sAT_PlusFEA()");
+
+/*
+ *-------------------------------------------------------------------
+ * process the value parameter
+ *-------------------------------------------------------------------
+ */
+  if( value NEQ ACI_NumParmNotPresent )
+  {
+    if( value NEQ 0 )
+    {
+      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+      return( AT_FAIL );
+    }
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * start FIT timer
+ *-------------------------------------------------------------------
+ */
+  cmhT30_StartFIT();
+
+  return( AT_CMPL );
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30S                 |
+| STATE   : code                  ROUTINE : sAT_PlusFCT              |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the +FCT AT
+            command which is responsible to set phase C response
+            timeout.
+
+            <value>: timeout.
+*/
+
+GLOBAL T_ACI_RETURN sAT_PlusFCT   (T_ACI_CMD_SRC srcId,
+                                   SHORT value )
+{
+
+  TRACE_FUNCTION ("sAT_PlusFCT()");
+
+/*
+ *-------------------------------------------------------------------
+ * process the value parameter
+ *-------------------------------------------------------------------
+ */
+  if( value NEQ ACI_NumParmNotPresent )
+  {
+    if( value NEQ 30 )
+    {
+      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+      return( AT_FAIL );
+    }
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * start FIT timer
+ *-------------------------------------------------------------------
+ */
+  cmhT30_StartFIT();
+
+  return( AT_CMPL );
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30S                 |
+| STATE   : code                  ROUTINE : sAT_PlusFMS              |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the +FMS AT
+            command which is responsible to set the minimum phase C
+            speed.
+
+            <br>: minimum phase C baud rate.
+*/
+
+GLOBAL T_ACI_RETURN sAT_PlusFMS (T_ACI_CMD_SRC srcId,
+                                 T_ACI_F_BR br)
+{
+  T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */
+
+  TRACE_FUNCTION ("sAT_PlusFMS()");
+
+/*
+ *-------------------------------------------------------------------
+ * check command source
+ *-------------------------------------------------------------------
+ */
+  if(!cmh_IsVldCmdSrc (srcId))
+  {
+    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+    return( AT_FAIL );
+  }
+
+  pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm;
+
+/*
+ *-------------------------------------------------------------------
+ * stop FIT timer
+ *-------------------------------------------------------------------
+ */
+  cmhT30_StopFIT();
+
+/*
+ *-------------------------------------------------------------------
+ * process the br parameter
+ *-------------------------------------------------------------------
+ */
+  switch( br )
+  {
+    case( F_BR_NotPresent ):
+
+      break;
+
+    case( F_BR_2400  ):
+    case( F_BR_4800  ):
+    case( F_BR_7200  ):
+    case( F_BR_9600  ):
+    case( F_BR_12000 ):
+    case( F_BR_14400 ):
+
+      pT30CmdPrm -> FMSbr = br;
+      break;
+
+    default:
+
+      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+      return( AT_FAIL );
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * start FIT timer
+ *-------------------------------------------------------------------
+ */
+  cmhT30_StartFIT();
+
+  return( AT_CMPL );
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30S                 |
+| STATE   : code                  ROUTINE : sAT_PlusFFC              |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the +FFC AT
+            command which is responsible to set the format conversion
+            parameters.
+
+            <vrc>: vertical resolution format.
+            <dfc>: data format.
+            <lnc>: page length format.
+            <wdc>: page width format.
+*/
+
+GLOBAL T_ACI_RETURN sAT_PlusFFC (T_ACI_CMD_SRC srcId,
+                                 T_ACI_FFC_VRC vrc,
+                                 T_ACI_FFC_DFC dfc,
+                                 T_ACI_FFC_LNC lnc,
+                                 T_ACI_FFC_WDC wdc)
+{
+
+  TRACE_FUNCTION ("sAT_PlusFFC()");
+
+/*
+ *-------------------------------------------------------------------
+ * process the vrc parameter
+ *-------------------------------------------------------------------
+ */
+  if( vrc NEQ FFC_VRC_NotPresent )
+  {
+    if( vrc NEQ FFC_VRC_Ignored )
+    {
+      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+      return( AT_FAIL );
+    }
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * process the dfc parameter
+ *-------------------------------------------------------------------
+ */
+  if( dfc NEQ FFC_DFC_NotPresent )
+  {
+    if( dfc NEQ FFC_DFC_Ignored )
+    {
+      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+      return( AT_FAIL );
+    }
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * process the lnc parameter
+ *-------------------------------------------------------------------
+ */
+  if( lnc NEQ FFC_LNC_NotPresent )
+  {
+    if( lnc NEQ FFC_LNC_Ignored )
+    {
+      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+      return( AT_FAIL );
+    }
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * process the wdc parameter
+ *-------------------------------------------------------------------
+ */
+  if( wdc NEQ FFC_WDC_NotPresent )
+  {
+    if( wdc NEQ FFC_WDC_Ignored )
+    {
+      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+      return( AT_FAIL );
+    }
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * start FIT timer
+ *-------------------------------------------------------------------
+ */
+  cmhT30_StartFIT();
+
+  return( AT_CMPL );
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30S                 |
+| STATE   : code                  ROUTINE : sAT_PlusFIP              |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the +FIP AT
+            command which is responsible to reset the FAX parameter to
+            their initial value.
+
+*/
+
+GLOBAL T_ACI_RETURN sAT_PlusFIP (T_ACI_CMD_SRC srcId)
+{
+
+  TRACE_FUNCTION ("sAT_PlusFIP()");
+
+/*
+ *-------------------------------------------------------------------
+ * check command source and reset parameters
+ *-------------------------------------------------------------------
+ */
+  if(!cmh_IsVldCmdSrc (srcId))
+  {
+    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+    return( AT_FAIL );
+  }
+
+  cmhT30_StopFIT();
+
+  cmhT30_InitFAXPrms( srcId );
+
+  cmhT30_RstNgtPrms();
+
+/*
+ *-------------------------------------------------------------------
+ * start FIT timer
+ *-------------------------------------------------------------------
+ */
+  cmhT30_StartFIT();
+
+  return( AT_CMPL );
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30S                 |
+| STATE   : code                  ROUTINE : sAT_PlusFPS              |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the +FPS AT command
+            which is responsible to set the post page response.
+
+            <ppr>:   post page response.
+*/
+
+GLOBAL T_ACI_RETURN sAT_PlusFPS (T_ACI_CMD_SRC srcId,
+                                 T_ACI_FPS_PPR ppr )
+{
+  T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */
+
+  TRACE_FUNCTION ("sAT_PlusFPS()");
+
+/*
+ *-------------------------------------------------------------------
+ * check command source
+ *-------------------------------------------------------------------
+ */
+  if(!cmh_IsVldCmdSrc (srcId))
+  {
+    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+    return( AT_FAIL );
+  }
+
+  pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm;
+
+/*
+ *-------------------------------------------------------------------
+ * stop FIT timer
+ *-------------------------------------------------------------------
+ */
+  cmhT30_StopFIT();
+
+/*
+ *-------------------------------------------------------------------
+ * process the ppr parameter
+ *-------------------------------------------------------------------
+ */
+  switch( ppr )
+  {
+    case( FPS_PPR_NotPresent ):
+      break;
+
+    case( FPS_PPR_Mcf ):
+    case( FPS_PPR_Rtn ):
+    case( FPS_PPR_Rtp ):
+    case( FPS_PPR_Pip ):
+    case( FPS_PPR_Pin ):
+
+      pT30CmdPrm -> FPSppr = ppr;
+      break;
+
+    default:
+
+      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+      return( AT_FAIL );
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * start FIT timer
+ *-------------------------------------------------------------------
+ */
+  cmhT30_StartFIT();
+
+  return( AT_CMPL );
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30S                 |
+| STATE   : code                  ROUTINE : sAT_PlusFSP              |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the +FSP AT command
+            which is responsible to set the possibility of polling.
+
+            <value>:   polling mode.
+*/
+
+GLOBAL T_ACI_RETURN sAT_PlusFSP   (T_ACI_CMD_SRC srcId,
+                                   T_ACI_FSP_VAL value )
+{
+  T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */
+
+  TRACE_FUNCTION ("sAT_PlusFSP()");
+
+/*
+ *-------------------------------------------------------------------
+ * check command source
+ *-------------------------------------------------------------------
+ */
+  if(!cmh_IsVldCmdSrc (srcId))
+  {
+    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+    return( AT_FAIL );
+  }
+
+  pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm;
+
+/*
+ *-------------------------------------------------------------------
+ * stop FIT timer
+ *-------------------------------------------------------------------
+ */
+  cmhT30_StopFIT();
+
+/*
+ *-------------------------------------------------------------------
+ * process the value parameter
+ *-------------------------------------------------------------------
+ */
+  switch( value )
+  {
+    case( FSP_VAL_NotPresent ):
+      break;
+
+    case( FSP_VAL_PollDisabled ):
+    case( FSP_VAL_PollEnable ):
+
+      pT30CmdPrm -> FSPval = value;
+      break;
+
+    default:
+
+      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+      return( AT_FAIL );
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * start FIT timer
+ *-------------------------------------------------------------------
+ */
+  cmhT30_StartFIT();
+
+  return( AT_CMPL );
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30S                 |
+| STATE   : code                  ROUTINE : sAT_PlusFAP              |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the +FAP AT
+            command which is responsible to set the address and
+            polling capabilities.
+
+            <sub>: destination subaddressing.
+            <sep>: selective polling.
+            <pwd>: password.
+*/
+
+GLOBAL T_ACI_RETURN sAT_PlusFAP   (T_ACI_CMD_SRC srcId,
+                                   T_ACI_FAP_VAL sub,
+                                   T_ACI_FAP_VAL sep,
+                                   T_ACI_FAP_VAL pwd )
+{
+  T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */
+
+  TRACE_FUNCTION ("sAT_PlusFAP()");
+
+/*
+ *-------------------------------------------------------------------
+ * check command source
+ *-------------------------------------------------------------------
+ */
+  if(!cmh_IsVldCmdSrc (srcId))
+  {
+    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+    return( AT_FAIL );
+  }
+
+  pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm;
+
+/*
+ *-------------------------------------------------------------------
+ * stop FIT timer
+ *-------------------------------------------------------------------
+ */
+  cmhT30_StopFIT();
+
+/*
+ *-------------------------------------------------------------------
+ * process the sub parameter
+ *-------------------------------------------------------------------
+ */
+  switch( sub )
+  {
+    case( FAP_VAL_NotPresent ):
+
+      sub = pT30CmdPrm -> FAPsub;
+      break;
+
+    case( FAP_VAL_Disabled ):
+    case( FAP_VAL_Enabled  ):
+
+      break;
+
+    default:
+
+      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+      return( AT_FAIL );
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * process the sub parameter
+ *-------------------------------------------------------------------
+ */
+  switch( sep )
+  {
+    case( FAP_VAL_NotPresent ):
+
+      sep = pT30CmdPrm -> FAPsep;
+      break;
+
+    case( FAP_VAL_Disabled ):
+    case( FAP_VAL_Enabled  ):
+
+      break;
+
+    default:
+
+      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+      return( AT_FAIL );
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * process the sub parameter
+ *-------------------------------------------------------------------
+ */
+  switch( pwd )
+  {
+    case( FAP_VAL_NotPresent ):
+
+      pwd = pT30CmdPrm -> FAPpwd;
+      break;
+
+    case( FAP_VAL_Disabled ):
+    case( FAP_VAL_Enabled  ):
+
+      break;
+
+    default:
+
+      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+      return( AT_FAIL );
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * assign the parameters
+ *-------------------------------------------------------------------
+ */
+  pT30CmdPrm -> FAPsub = sub;
+  pT30CmdPrm -> FAPsep = sep;
+  pT30CmdPrm -> FAPpwd = pwd;
+
+/*
+ *-------------------------------------------------------------------
+ * start FIT timer
+ *-------------------------------------------------------------------
+ */
+  cmhT30_StartFIT();
+
+  return( AT_CMPL );
+}
+
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30S                 |
+| STATE   : code                  ROUTINE : sAT_PlusFDT              |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the +FDT AT
+            command which is responsible to transmit FAX data.
+
+*/
+
+GLOBAL T_ACI_RETURN sAT_PlusFDT (T_ACI_CMD_SRC srcId)
+{
+
+  TRACE_FUNCTION ("sAT_PlusFDT()");
+
+/*
+ *-------------------------------------------------------------------
+ * check command source
+ *-------------------------------------------------------------------
+ */
+   if(!cmh_IsVldCmdSrc (srcId) OR
+      !psaCC_ctbIsValid (t30ShrdPrm.cId) OR
+     (t30ShrdPrm.faxStat NEQ FS_IDL AND t30ShrdPrm.faxStat NEQ FS_SND_DOC))
+  {
+    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+    return( AT_FAIL );
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * stop FIT timer
+ *-------------------------------------------------------------------
+ */
+  cmhT30_StopFIT();
+
+/*
+ *-------------------------------------------------------------------
+ * check entity status
+ *-------------------------------------------------------------------
+ */
+  if( t30EntStat.curCmd NEQ AT_CMD_NONE )
+
+    return( AT_BUSY );
+
+  t30EntStat.curCmd = AT_CMD_FDT;
+  t30EntStat.entOwn = srcId;
+
+/*
+ *-------------------------------------------------------------------
+ * negotiate transmission parameters and send DCS
+ *-------------------------------------------------------------------
+ */
+  if( t30ShrdPrm.faxStat EQ FS_IDL OR
+      t30ShrdPrm.faxStat EQ FS_DOC_TRF )
+  {
+    cmhT30_NgtDCEPrms( srcId );
+
+    /* check for minimum speed condition */
+    if( t30NgtPrms.FCSbr < fnd_cmhPrm[srcId].t30CmdPrm.FMSbr )
+    {
+      TRACE_EVENT("DISCONNECT CALL DUE TO FALL BELOW MINIMUM SPEED CONDITION");
+      t30ShrdPrm.faxStat = FS_IDL;
+      t30EntStat.curCmd  = AT_CMD_NONE;
+      ccShrdPrm.datStat  = DS_DSC_REQ;
+      cmhT30_Deactivate ();
+      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_FaxMinSpeedCond );
+      return( AT_FAIL );
+    }
+    cmhT30_SendCaps ( srcId, FRT_DCS );
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * check for connect message
+ *-------------------------------------------------------------------
+ */
+    if( t30ShrdPrm.faxStat EQ FS_IDL OR t30ShrdPrm.faxStat EQ FS_DOC_TRF )
+    {
+      R_AT( RAT_FCS, t30EntStat.entOwn )
+        ( t30NgtPrms.FCSvr,
+          t30NgtPrms.FCSbr,
+          t30NgtPrms.FCSwd,
+          t30NgtPrms.FCSln,
+          t30NgtPrms.FCSdf,
+          t30NgtPrms.FCSec,
+          t30NgtPrms.FCSbf,
+          t30NgtPrms.FCSst,
+          t30NgtPrms.FCSjp);
+    }
+    t30ShrdPrm.faxStat = FS_SND_DOC;
+    pageSentFlg = FALSE;
+    ppmPendFlg  = FALSE;
+    cmhT30_StartFIT();
+    TRACE_EVENT ("START DTE->DCE FAX DATA PHASE");
+/*
+    R_AT( RAT_CONNECT, t30EntStat.entOwn )
+      ( t30EntStat.curCmd, cmhT30_GetDataRate(), t30ShrdPrm.cId+1, FALSE );
+*/
+  return( AT_EXCT );
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30S                 |
+| STATE   : code                  ROUTINE : sAT_PlusFDR              |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the +FDR AT
+            command which is responsible to receive FAX data.
+
+*/
+
+GLOBAL T_ACI_RETURN sAT_PlusFDR (T_ACI_CMD_SRC srcId)
+{
+  TRACE_FUNCTION ("sAT_PlusFDR()");
+/*
+ *-------------------------------------------------------------------
+ * check command source
+ *-------------------------------------------------------------------
+ */
+  if(!cmh_IsVldCmdSrc (srcId) OR
+     !psaCC_ctbIsValid (t30ShrdPrm.cId) OR
+     fnd_cmhPrm[srcId].t30CmdPrm.FCRval EQ FCR_VAL_NoRcvCap OR
+     (t30ShrdPrm.faxStat NEQ FS_IDL AND t30ShrdPrm.faxStat NEQ FS_RCV_DOC))
+  {
+    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+    return( AT_FAIL );
+  }
+  cmhT30_StopFIT();
+
+/*
+ *-------------------------------------------------------------------
+ * check entity status
+ *-------------------------------------------------------------------
+ */
+  if( t30EntStat.curCmd NEQ AT_CMD_NONE )
+    return( AT_BUSY );
+
+  t30EntStat.curCmd = AT_CMD_FDR;
+  t30EntStat.entOwn = srcId;
+
+/*
+ *-------------------------------------------------------------------
+ * check to send a DTC frame
+ *-------------------------------------------------------------------
+ */
+  if( DTCSentFlg EQ FALSE                                    AND
+      (t30ShrdPrm.faxStat EQ FS_IDL OR
+       t30ShrdPrm.faxStat EQ FS_DOC_TRF)                     AND
+      psaCC_ctb(t30ShrdPrm.cId)->calType EQ CT_MOC           AND
+      fnd_cmhPrm[t30EntStat.entOwn].t30CmdPrm.FSPval EQ FSP_VAL_PollEnable )
+  {
+    DTCSentFlg = TRUE;
+    cmhT30_SendCaps ( srcId, FRT_DTC );
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * check to send a post page response
+ *-------------------------------------------------------------------
+ */
+  else if (t30ShrdPrm.faxStat EQ FS_RCV_DOC OR t30ShrdPrm.faxStat EQ FS_DOC_TRF)
+  {
+    t30ShrdPrm.sgn_snd = cmhT30_GetPpr(fnd_cmhPrm[srcId].t30CmdPrm.FPSppr);
+    if( psaT30_Ppm( ) < 0 )  /* send ppm */
+    {
+      TRACE_EVENT( "FATAL RETURN psaT30 in sAT_PlusFDR" );
+      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Internal );
+      return( AT_FAIL );
+    }
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * check for connect message
+ *-------------------------------------------------------------------
+ */
+  t30ShrdPrm.faxStat = FS_RCV_DOC;
+  return( AT_EXCT );
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30S                 |
+| STATE   : code                  ROUTINE : sAT_PlusFKS              |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the +FKS AT
+            command which is responsible to terminate a FAX session.
+
+*/
+
+GLOBAL T_ACI_RETURN sAT_PlusFKS (T_ACI_CMD_SRC srcId)
+{
+  TRACE_FUNCTION ("sAT_PlusFKS()");
+
+  /* check command source */
+  if(!cmh_IsVldCmdSrc (srcId) )
+  {
+    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+    return( AT_FAIL );
+  }
+  cmhT30_StopFIT();
+
+  /* check entity status */
+  if( t30EntStat.curCmd NEQ AT_CMD_NONE )
+    return( AT_BUSY );
+
+  /* check for active call */
+  if (!psaCC_ctbIsValid (t30ShrdPrm.cId))
+    return( AT_CMPL );
+
+  t30EntStat.curCmd = AT_CMD_FKS;
+  t30EntStat.entOwn = srcId;
+
+  /* disconnect T30 */
+  psaT30_Disconnect( );
+
+  return( AT_EXCT );
+}
+
+/*
++-------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30                 |
+|                                 ROUTINE : cmhT30_Activate         |
++-------------------------------------------------------------------+
+
+  PURPOSE : set all nescessary parameters and activate T30
+
+*/
+
+GLOBAL T_ACI_RETURN cmhT30_Activate ( T_ACI_CMD_SRC srcId,
+                                      T_ACI_AT_CMD cmdId,
+                                      SHORT cId )
+{
+  TRACE_FUNCTION ("cmhT30_Activate()");
+
+  /* check command source */
+  if(!cmh_IsVldCmdSrc (srcId))
+    return( AT_FAIL );
+
+  /* check entity status */
+  if( t30EntStat.curCmd NEQ AT_CMD_NONE )
+
+    return( AT_BUSY );
+
+  /* fill in activate parameters */
+  t30ShrdPrm.trans_rate = cmhT30_SelChnRate();
+  if( t30ShrdPrm.trans_rate EQ NOT_PRESENT_16BIT )
+    return( AT_FAIL );
+
+  t30ShrdPrm.bitord = cmhT30_SelBitOrder( srcId );
+  if( t30ShrdPrm.bitord EQ NOT_PRESENT_8BIT )
+    return( AT_FAIL );
+
+  t30ShrdPrm.half_rate        = cmhT30_SelHlfRate();
+  t30ShrdPrm.threshold        = T30_DEF_THLD;
+  t30ShrdPrm.frames_per_prim  = T30_DEF_FRMPRIM;
+  t30ShrdPrm.hdlc_report      = TRUE;
+  t30ShrdPrm.test_mode        = 0;    /* needed for simulation */
+
+  t30ShrdPrm.cId     = cId;
+  t30EntStat.curCmd  = cmdId;
+  t30EntStat.entOwn  = srcId;
+
+  FHSstat = FHS_STAT_NormEnd;         /* reset call termination status */
+
+  psaT30_Activate( );
+  return( AT_EXCT );
+}
+
+/*
++-------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30                 |
+|                                 ROUTINE : cmhT30_Deactivate       |
++-------------------------------------------------------------------+
+
+  PURPOSE : set all nescessary parameters and deactivate T30
+
+*/
+
+GLOBAL T_ACI_RETURN cmhT30_Deactivate ( void )
+{
+  UBYTE src_id = t30EntStat.entOwn;
+#ifdef FF_PSI
+  T_ACI_DTI_PRC_PSI  *src_infos = find_element (psi_src_params, 
+                                 src_id, cmhPSItest_srcId);
+#endif /*FF_PSI*/
+  T_DTI_CNTRL    info;
+
+  TRACE_FUNCTION ("cmht30_Deactivate()");
+
+
+  if (dti_cntrl_get_info_from_src_id( src_id, &info) EQ FALSE)
+  {
+    TRACE_EVENT_P1("cannot find info for src_id=%d", src_id);
+    return( AT_FAIL );
+  }
+
+  if (dti_cntrl_is_dti_channel_connected(DTI_ENTITY_T30, info.dti_id))
+  {
+    T_DTI_ENTITY_ID entity_list[] = {DTI_ENTITY_ACI};
+#ifdef FF_PSI
+    if (src_infos NEQ NULL)
+      dti_cntrl_est_dpath_indirect ( src_id,
+                                   entity_list,
+                                   1,
+                                   SPLIT,
+                                   atiPSI_dti_cb,
+                                   DTI_CPBLTY_CMD,
+                                   DTI_CID_NOTPRESENT);
+    else
+#endif
+      dti_cntrl_est_dpath_indirect ( src_id,
+                                   entity_list,
+                                   1,
+                                   SPLIT,
+                                   atiUART_dti_cb,
+                                   DTI_CPBLTY_CMD,
+                                   DTI_CID_NOTPRESENT);
+
+    return( AT_EXCT );
+  }
+
+  /* reset parameters to initial value */
+  cmhT30_RstNgtPrms();              /* reset negotiation parameter */
+
+  /* deactivate */
+  psaT30_Deactivate( );
+  return( AT_EXCT );
+}
+
+/*
++-------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30                 |
+|                                 ROUTINE : cmhT30_Modify           |
++-------------------------------------------------------------------+
+
+  PURPOSE : set all nescessary parameters and modify T30
+
+*/
+
+GLOBAL T_ACI_RETURN cmhT30_Modify (void)
+{
+  TRACE_FUNCTION ("cmhT30_Modify()");
+
+  /* fill in modify parameters */
+  t30ShrdPrm.trans_rate = cmhT30_SelUsrRate();
+  if (t30ShrdPrm.trans_rate EQ NOT_PRESENT_16BIT)
+  {
+    t30ShrdPrm.trans_rate = cmhT30_SelChnRate();
+  }
+  if (t30ShrdPrm.trans_rate EQ NOT_PRESENT_16BIT)
+    return (AT_FAIL);
+
+  t30ShrdPrm.half_rate = cmhT30_SelHlfRate();
+
+  psaT30_Modify( );
+  return( AT_EXCT );
+}
+
+/*
++-------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30                 |
+|                                 ROUTINE : cmhT30_SendCaps         |
++-------------------------------------------------------------------+
+
+  PURPOSE : Send local DCE capability parameters
+
+*/
+
+GLOBAL T_ACI_RETURN cmhT30_SendCaps ( T_ACI_CMD_SRC srcId,
+                                      T_T30_FRTP frmTyp )
+{
+  T_T30_CMD_PRM * pT30CmdPrm;  /* points to T30 command parameters */
+
+  TRACE_FUNCTION ("cmhT30_SendCaps()");
+
+/*
+ *-------------------------------------------------------------------
+ * check command source
+ *-------------------------------------------------------------------
+ */
+  if(!cmh_IsVldCmdSrc (srcId))
+
+    return( AT_FAIL );
+
+  pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm;
+
+/*
+ *-------------------------------------------------------------------
+ * build capability parameter
+ *-------------------------------------------------------------------
+ */
+  t30ShrdPrm.hdlc_snd.crp = FALSE;
+  cmhT30_BuildSndFrm( srcId, frmTyp );
+
+  switch( frmTyp )
+  {
+    /*
+     *---------------------------------------------------------------
+     * for a DIS frame
+     *---------------------------------------------------------------
+     */
+    case( FRT_DIS ):
+
+      t30ShrdPrm.hdlc_snd.v_dcs = t30ShrdPrm.hdlc_snd.v_dtc = FALSE;
+      t30ShrdPrm.hdlc_snd.c_nsc = t30ShrdPrm.hdlc_snd.c_nss = 0;
+      t30ShrdPrm.hdlc_snd.c_tsi = t30ShrdPrm.hdlc_snd.c_cig = 0;
+
+                                          /* non-standard facility */
+      t30ShrdPrm.hdlc_snd.c_nsf = pT30CmdPrm -> FNSlen;
+
+      if (pT30CmdPrm -> FNSlen)
+      {
+        memcpy( t30ShrdPrm.hdlc_snd.nsf, pT30CmdPrm -> FNSoct,
+                pT30CmdPrm -> FNSlen);
+      }
+
+      if( pT30CmdPrm -> FLIstr[0] NEQ 0 ) /* calling subscr. id */
+      {
+        t30ShrdPrm.hdlc_snd.c_csi = strlen( pT30CmdPrm -> FLIstr );
+        strncpy( (char *) t30ShrdPrm.hdlc_snd.csi,
+                 (char *) pT30CmdPrm -> FLIstr,
+                 t30ShrdPrm.hdlc_snd.c_csi );
+      }
+      else
+      {
+        t30ShrdPrm.hdlc_snd.c_csi = 0;
+      }
+      break;
+
+    /*
+     *---------------------------------------------------------------
+     * for a DTC frame
+     *---------------------------------------------------------------
+     */
+    case( FRT_DTC ):
+
+      t30ShrdPrm.hdlc_snd.v_dcs = t30ShrdPrm.hdlc_snd.v_dis = FALSE;
+      t30ShrdPrm.hdlc_snd.c_nsf = t30ShrdPrm.hdlc_snd.c_nss = 0;
+      t30ShrdPrm.hdlc_snd.c_tsi = t30ShrdPrm.hdlc_snd.c_csi = 0;
+
+                                          /* non-standard facility */
+      t30ShrdPrm.hdlc_snd.c_nsc = pT30CmdPrm -> FNSlen;
+
+      if (pT30CmdPrm -> FNSlen)
+      {
+        memcpy( t30ShrdPrm.hdlc_snd.nsc, pT30CmdPrm -> FNSoct,
+                pT30CmdPrm -> FNSlen);
+      }
+
+      if( pT30CmdPrm -> FPWpwd[0] NEQ 0 )     /* password string */
+      {
+        t30ShrdPrm.hdlc_snd.c_pwd = strlen( pT30CmdPrm -> FPWpwd );
+        strncpy( (char *) t30ShrdPrm.hdlc_snd.pwd,
+                 (char *) pT30CmdPrm -> FPWpwd,
+                 t30ShrdPrm.hdlc_snd.c_pwd );
+      }
+      else
+      {
+        t30ShrdPrm.hdlc_snd.c_pwd = 0;
+      }
+
+      if( pT30CmdPrm -> FPAsep[0] NEQ 0 )     /* selective polling string */
+      {
+        t30ShrdPrm.hdlc_snd.c_sep = strlen( pT30CmdPrm -> FPAsep );
+        strncpy( (char *) t30ShrdPrm.hdlc_snd.sep,
+                 (char *) pT30CmdPrm -> FPAsep,
+                 t30ShrdPrm.hdlc_snd.c_sep );
+      }
+      else
+      {
+        t30ShrdPrm.hdlc_snd.c_sep = 0;
+      }
+
+      if( pT30CmdPrm -> FPIstr[0] NEQ 0 ) /* calling subscr. id */
+      {
+        t30ShrdPrm.hdlc_snd.c_cig = strlen( pT30CmdPrm -> FPIstr );
+        strncpy( (char *) t30ShrdPrm.hdlc_snd.cig,
+                 (char *) pT30CmdPrm -> FPIstr,
+                 t30ShrdPrm.hdlc_snd.c_cig );
+      }
+      else
+      {
+        t30ShrdPrm.hdlc_snd.c_cig = 0;
+      }
+      break;
+
+    /*
+     *---------------------------------------------------------------
+     * for a DCS frame
+     *---------------------------------------------------------------
+     */
+    case( FRT_DCS ):
+
+      t30ShrdPrm.hdlc_snd.v_dis = t30ShrdPrm.hdlc_snd.v_dtc = FALSE;
+      t30ShrdPrm.hdlc_snd.c_nsc = t30ShrdPrm.hdlc_snd.c_nsf = 0;
+      t30ShrdPrm.hdlc_snd.c_csi = t30ShrdPrm.hdlc_snd.c_cig = 0;
+
+                                          /* non-standard facility */
+      t30ShrdPrm.hdlc_snd.c_nss = pT30CmdPrm -> FNSlen;
+
+      if (pT30CmdPrm -> FNSlen)
+      {
+        memcpy( t30ShrdPrm.hdlc_snd.nss, pT30CmdPrm -> FNSoct,
+              pT30CmdPrm -> FNSlen);
+      }
+
+      if( pT30CmdPrm -> FPWpwd[0] NEQ 0 )     /* password string */
+      {
+        t30ShrdPrm.hdlc_snd.c_pwd = strlen( pT30CmdPrm -> FPWpwd );
+        strncpy( (char *) t30ShrdPrm.hdlc_snd.pwd,
+                 (char *) pT30CmdPrm -> FPWpwd,
+                 t30ShrdPrm.hdlc_snd.c_pwd );
+      }
+      else
+      {
+        t30ShrdPrm.hdlc_snd.c_pwd = 0;
+      }
+
+      if( pT30CmdPrm -> FSAsub[0] NEQ 0 )     /* subaddress string */
+      {
+        t30ShrdPrm.hdlc_snd.c_sub = strlen( pT30CmdPrm -> FSAsub );
+        strncpy( (char *) t30ShrdPrm.hdlc_snd.sub,
+                 (char *) pT30CmdPrm -> FSAsub,
+                 t30ShrdPrm.hdlc_snd.c_sub );
+      }
+      else
+      {
+        t30ShrdPrm.hdlc_snd.c_sub = 0;
+      }
+
+      if( pT30CmdPrm -> FLIstr[0] NEQ 0 ) /* transmitting subscr. id */
+      {
+        t30ShrdPrm.hdlc_snd.c_tsi = strlen( pT30CmdPrm -> FLIstr );
+        strncpy( (char *) t30ShrdPrm.hdlc_snd.tsi,
+                 (char *) pT30CmdPrm -> FLIstr,
+                 t30ShrdPrm.hdlc_snd.c_tsi );
+      }
+      else
+      {
+        t30ShrdPrm.hdlc_snd.c_tsi = 0;
+      }
+      break;
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * send capability parameter
+ *-------------------------------------------------------------------
+ */
+  psaT30_Capabilities( );
+
+/*
+ *-------------------------------------------------------------------
+ * check for T30 modification
+ *-------------------------------------------------------------------
+ */
+  if( frmTyp EQ FRT_DCS )
+  {
+    if( cmhT30_Chk4TCHAdpt() )
+    {
+      ccShrdPrm.datStat = DS_TCH_MDF; /* wait for TCH change */
+    }
+    else
+    {
+      if( cmhT30_Modify() NEQ AT_EXCT )
+      {
+        ccShrdPrm.datStat = DS_DSC_REQ;
+        cmhT30_Deactivate();
+      }
+    }
+  }
+  return( AT_EXCT );
+}
+
+
+/*
++-------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)    MODULE  : CMH_T30S                     |
+|                            ROUTINE : cmhT30_PPMRcvd               |
++-------------------------------------------------------------------+
+
+  PURPOSE : post page message was received
+
+*/
+/* does not seem to be called */
+#if 0
+GLOBAL void cmhT30_PPMRcvd ( UBYTE ppm )
+{
+  TRACE_FUNCTION ("cmhT30_PPMRcvd()");
+
+  /* determine type of post page message */
+  switch( ppm )
+  {
+    case( SGN_MPS ):                    /* multi-page signal */
+    case( SGN_EOP ):                    /* end of procedure */
+
+      t30ShrdPrm.faxStat = FS_SND_DOC;  /* stay in send document */
+      break;
+
+    case( SGN_EOM ):
+
+      /*--- no more doc available for polling if polled ---*/
+      if( ccShrdPrm.ctb[t30ShrdPrm.cId].calType EQ CT_MTC )
+      {
+        fnd_cmhPrm[t30EntStat.entOwn].t30CmdPrm.FLPval = FLP_VAL_NoPollDoc;
+      }
+
+      t30ShrdPrm.faxStat = FS_DOC_TRF;  /* switch to document transfered */
+      break;
+
+    default:
+
+      return;
+  }
+
+  /* send PPM to T.30 */
+  t30ShrdPrm.sgn_snd = ppm;
+
+  if( PRIRcvdFlg AND
+      fnd_cmhPrm[t30EntStat.entOwn].t30CmdPrm.FIEval EQ FIE_VAL_AcceptPRI)
+
+      t30ShrdPrm.sgn_snd |= PRI_MRK;
+
+  if( pageSentFlg EQ TRUE )
+  {
+    if( psaT30_Ppm( ) < 0 )  /* T30 PPM request */
+    {
+      TRACE_EVENT( "FATAL RETURN psaT30 in cmhT30_PPMRcvd" );
+    }
+  }
+  else
+
+    ppmPendFlg = TRUE;
+}
+#endif /* 0 */
+
+/*
++-------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)    MODULE  : CMH_T30S                     |
+|                            ROUTINE : cmhT30_PRIRcvd               |
++-------------------------------------------------------------------+
+
+  PURPOSE : procedure interrupt message was received
+
+*/
+
+GLOBAL void cmhT30_PRIRcvd ( void )
+{
+  TRACE_FUNCTION ("cmhT30_PRIRcvd()");
+
+  PRIRcvdFlg = TRUE;
+}
+
+/*
++-------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_T30                 |
+|                                 ROUTINE : cmhT30_FITTimeout       |
++-------------------------------------------------------------------+
+
+  PURPOSE : handle FAX inactivity timeout
+
+*/
+
+GLOBAL void cmhT30_FITTimeout ( void )
+{
+  TRACE_FUNCTION( "cmhT30_FITTimeout()" );
+
+  if (!psaCC_ctbIsValid (t30ShrdPrm.cId))
+  {
+    TRACE_ERROR ("t30ShrdPrm.cId invalid");
+    return;
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * notify CC  to release the call
+ *-------------------------------------------------------------------
+ */
+  t30ShrdPrm.faxStat = FS_IDL;
+  t30EntStat.curCmd  = AT_CMD_NONE;
+
+  cmhCC_T30_Failed();
+
+  if( fnd_cmhPrm[t30EntStat.entOwn].t30CmdPrm.FITact EQ FIT_ACT_OnHookRst )
+
+    fnd_cmhPrm[t30EntStat.entOwn].t30CmdPrm.FCLASSclass = FCLASS_CLASS_Data;
+}
+#endif /* DTI OR FF_FAX*/
+/*==== EOF ========================================================*/