annotate DUART28-with-FCDEV3B @ 51:7933c3a1b5e0

FC-handset-spec: power domain mess documented
author Mychaela Falconia <falcon@freecalypso.org>
date Fri, 11 Jun 2021 08:04:44 +0000
parents ac33ec9a07d9
children
Ignore whitespace changes - Everywhere: Within whitespace: At end of lines:
rev   line source
36
db344818b323 DUART28-with-FCDEV3B article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
1 This article describes how to connect FreeCalypso DUART28 adapter to an FCDEV3B
db344818b323 DUART28-with-FCDEV3B article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
2 target board, both the main connection of dual UART and optional boot control
db344818b323 DUART28-with-FCDEV3B article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
3 connections.
db344818b323 DUART28-with-FCDEV3B article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
4
db344818b323 DUART28-with-FCDEV3B article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
5 Main connection: dual UART
db344818b323 DUART28-with-FCDEV3B article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
6 ==========================
db344818b323 DUART28-with-FCDEV3B article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
7
db344818b323 DUART28-with-FCDEV3B article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
8 The main connection of two UARTs is made with a 10-wire ribbon cable. You
db344818b323 DUART28-with-FCDEV3B article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
9 should have received the correct cable from Falconia Partners LLC together with
db344818b323 DUART28-with-FCDEV3B article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
10 your FCDEV3B+DUART28 board kit - it is a rainbow-colored 10-wire ribbon cable
37
ac33ec9a07d9 DUART28-with-FCDEV3B: the end going to DUART28 can be either blue or grey
Mychaela Falconia <falcon@freecalypso.org>
parents: 36
diff changeset
11 with two different end terminations: one end is terminated with a blue or grey
ac33ec9a07d9 DUART28-with-FCDEV3B: the end going to DUART28 can be either blue or grey
Mychaela Falconia <falcon@freecalypso.org>
parents: 36
diff changeset
12 IDC connector, the other end is terminated with a black connector into which
ac33ec9a07d9 DUART28-with-FCDEV3B: the end going to DUART28 can be either blue or grey
Mychaela Falconia <falcon@freecalypso.org>
parents: 36
diff changeset
13 individual wires are inserted from the top. The blue or grey connector goes to
ac33ec9a07d9 DUART28-with-FCDEV3B: the end going to DUART28 can be either blue or grey
Mychaela Falconia <falcon@freecalypso.org>
parents: 36
diff changeset
14 the DUART28, the black connector goes to the FCDEV3B.
36
db344818b323 DUART28-with-FCDEV3B article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
15
37
ac33ec9a07d9 DUART28-with-FCDEV3B: the end going to DUART28 can be either blue or grey
Mychaela Falconia <falcon@freecalypso.org>
parents: 36
diff changeset
16 The blue or grey connector going to the DUART28 board is keyed such that it can
ac33ec9a07d9 DUART28-with-FCDEV3B: the end going to DUART28 can be either blue or grey
Mychaela Falconia <falcon@freecalypso.org>
parents: 36
diff changeset
17 be inserted in only one orientation, hence that one is expected to be always
36
db344818b323 DUART28-with-FCDEV3B article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
18 correct. The black connector goes to the middle of the three headers on
db344818b323 DUART28-with-FCDEV3B article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
19 FCDEV3B (J301), and in this case you are responsible for ensuring the correct
db344818b323 DUART28-with-FCDEV3B article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
20 orientation. If you are using the official DUART28 to FCDEV3B cable from
db344818b323 DUART28-with-FCDEV3B article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
21 Falconia Partners LLC, then the side with brown and red wires needs to be
db344818b323 DUART28-with-FCDEV3B article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
22 facing toward JTAG and power input connectors.
db344818b323 DUART28-with-FCDEV3B article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
23
db344818b323 DUART28-with-FCDEV3B article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
24 Optional boot control provision
db344818b323 DUART28-with-FCDEV3B article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
25 ===============================
db344818b323 DUART28-with-FCDEV3B article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
26
db344818b323 DUART28-with-FCDEV3B article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
27 If you wish to connect the optional boot control signals, connect two
db344818b323 DUART28-with-FCDEV3B article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
28 individual jumper wires as follows:
db344818b323 DUART28-with-FCDEV3B article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
29
db344818b323 DUART28-with-FCDEV3B article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
30 * For PWON control, connect DUART28 CTL1 to the top pin of 2-pin header JP1 on
db344818b323 DUART28-with-FCDEV3B article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
31 FCDEV3B, namely the pin that is closer to the adjacent PWON button. (The
db344818b323 DUART28-with-FCDEV3B article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
32 other pin on JP1 is ground.)
db344818b323 DUART28-with-FCDEV3B article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
33
db344818b323 DUART28-with-FCDEV3B article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
34 * For RESET control, connect DUART28 CTL2 to JTAG connector J310 pin 2 on
db344818b323 DUART28-with-FCDEV3B article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
35 FCDEV3B, which is the XDS_RESET signal. Naturally one cannot connect both
db344818b323 DUART28-with-FCDEV3B article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
36 DUART28 CTL2 and JTAG at the same time.
db344818b323 DUART28-with-FCDEV3B article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
37
db344818b323 DUART28-with-FCDEV3B article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
38 * Ground connection between the two boards will normally be provided by the
db344818b323 DUART28-with-FCDEV3B article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
39 main dual UART cable.
db344818b323 DUART28-with-FCDEV3B article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
40
db344818b323 DUART28-with-FCDEV3B article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
41 If you are going to connect these boot control signals, you MUST reprogram the
db344818b323 DUART28-with-FCDEV3B article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
42 EEPROM on your DUART28 board to the DUART28C configuration and apply the
db344818b323 DUART28-with-FCDEV3B article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
43 necessary DUART28C support patch to your Linux kernel ftdi_sio driver -
db344818b323 DUART28-with-FCDEV3B article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
44 otherwise your hardware setup will be inoperable, with FCDEV3B getting held
db344818b323 DUART28-with-FCDEV3B article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
45 down in reset whenever the second serial port is opened for regular serial
db344818b323 DUART28-with-FCDEV3B article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
46 communication.