diff gtm900/interface-signals @ 290:c06cac606af3

gtm900/interface-signals: notes from connection tracing
author Mychaela Falconia <falcon@freecalypso.org>
date Fri, 07 Jun 2019 20:20:49 +0000
parents
children
line wrap: on
line diff
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/gtm900/interface-signals	Fri Jun 07 20:20:49 2019 +0000
@@ -0,0 +1,49 @@
+UART interfaces
+===============
+
+Both Calypso UARTs are brought out on the GTM900 module interface as follows:
+
+Pin	Name in manual	Connected Calypso ball
+11	RXD2		TX_IRDA
+12	TXD2		RX_IRDA
+-------------------------------
+16	UART_DSR	GPIO1
+17	UART_RI		GPIO0
+18	UART_RXD	TX_MODEM
+19	UART_TXD	RX_MODEM
+20	UART_CTS	RTS_MODEM
+21	UART_RTS	CTS_MODEM
+22	UART_DTR	GPIO3
+23	UART_DCD	GPIO2
+
+The interface signal names in Huawei's manual are given from the host's
+perspective (classic DTE-to-DCE paradigm), thus they are the opposite of the
+connected Calypso signal names.  For the MODEM UART a complete 8-signal
+interface with full modem control is defined, but the Calypso only provides
+TxD & RxD, RTS & CTS, thus the other 4 modem control signals are GPIOs.  The
+signals which are defined as DTR and DCD from the host's perspective are
+connected to GPIOs 3 and 2, respectively, just like on TI's C-Sample and
+D-Sample boards, whereas the choices of GPIOs for DSR and RI are Huawei's own
+arbitrary picks, as TI's development boards did not provide these signals.
+
+Power control signals
+=====================
+
+Interface pin 13 (called VDD in the manual) appears to be connected to the V-IO
+rail inside.
+
+Interface pin 15 (PWON) is connected directly to Iota PWON as expected.
+
+Interface pin 31 (called RST in the manual) appears to be connected to Iota
+nTESTRESET through the same transistor circuit as on TI's development boards,
+i.e., the signal brought out on the module interface is not raw nTESTRESET, but
+what we call XDS_RESET, originally meant to be driven by TI's XDS510 and XDS560
+"emulator" pods.
+
+Other signals
+=============
+
+Interface pin 14 (called ADC in the manual) is connected to Iota ADIN1.
+
+Interface pin 32 (called LPG in the manual) is indeed connected to Calypso ball
+DSR_MODEM/LPG, which Huawei's firmware configures to be the LPG output.