--- a/doc/Loadtools-on-GTA0x	Mon Feb 03 07:56:57 2020 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,34 +0,0 @@
-FreeCalypso loadtools are currently a part of FC host tools, but they used to
-be a separate package.  In those days that separate package of loadtools could
-be built in two ways:
-
-1) One could compile and install loadtools on a general-purpose host system
-   such as a GNU/Linux PC or laptop, and then potentially use them to operate
-   on multiple Calypso targets of different kinds.
-
-2) One could compile loadtools to run on the application processor of a
-   smartphone such as Openmoko GTA0x, in which case it makes no sense for that
-   special build of loadtools to support any target other than the specific
-   modem in that smartphone.
-
-Loadtools can be built with compalstage support excluded and with
-GTA0x-specific modem power control included instead.  This build will still
-include a bunch of functions of no relevance to GTA0x, but oh well..
-
-To build loadtools for the GTA0x AP, you'll need to make the following
-modifications to loadtools/Makefile:
-
-* Change the CC= line to point to the appropriate cross-compiler (which you'll
-  need to provide yourself).
-
-* Change the CFLAGS= line: add the right options to target the ARM920T core in
-  the GTA0x AP (e.g., -march=armv4t -mtune=arm920t), and add -DGTA0x_AP_BUILD
-  to enable some code that makes sense only when running on the GTA0x AP.
-
-* Change the PROGS= line to not build fc-compalram or fc-buzplay: the latter
-  utilities are not applicable to GTA0x.
-
-* Change EXTRA_OBJ= from listing compalload.o to listing compaldummy.o and
-  gtapower.o instead.
-
-See loadtools/gta-ap-build.sed for an example.

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/loadtools/old/Loadtools-on-GTA0x	Mon Feb 03 08:13:15 2020 +0000
@@ -0,0 +1,34 @@
+FreeCalypso loadtools are currently a part of FC host tools, but they used to
+be a separate package.  In those days that separate package of loadtools could
+be built in two ways:
+
+1) One could compile and install loadtools on a general-purpose host system
+   such as a GNU/Linux PC or laptop, and then potentially use them to operate
+   on multiple Calypso targets of different kinds.
+
+2) One could compile loadtools to run on the application processor of a
+   smartphone such as Openmoko GTA0x, in which case it makes no sense for that
+   special build of loadtools to support any target other than the specific
+   modem in that smartphone.
+
+Loadtools can be built with compalstage support excluded and with
+GTA0x-specific modem power control included instead.  This build will still
+include a bunch of functions of no relevance to GTA0x, but oh well..
+
+To build loadtools for the GTA0x AP, you'll need to make the following
+modifications to loadtools/Makefile:
+
+* Change the CC= line to point to the appropriate cross-compiler (which you'll
+  need to provide yourself).
+
+* Change the CFLAGS= line: add the right options to target the ARM920T core in
+  the GTA0x AP (e.g., -march=armv4t -mtune=arm920t), and add -DGTA0x_AP_BUILD
+  to enable some code that makes sense only when running on the GTA0x AP.
+
+* Change the PROGS= line to not build fc-compalram or fc-buzplay: the latter
+  utilities are not applicable to GTA0x.
+
+* Change EXTRA_OBJ= from listing compalload.o to listing compaldummy.o and
+  gtapower.o instead.
+
+See loadtools/gta-ap-build.sed for an example.