FreeCalypso > hg > tcs211-fcmodem
comparison chipsetsw/layer1/p_include/l1p_cons.h @ 0:509db1a7b7b8
initial import: leo2moko-r1
| author | Space Falcon <falcon@ivan.Harhan.ORG> |
|---|---|
| date | Mon, 01 Jun 2015 03:24:05 +0000 |
| parents | |
| children |
comparison
equal
deleted
inserted
replaced
| -1:000000000000 | 0:509db1a7b7b8 |
|---|---|
| 1 /************* Revision Controle System Header ************* | |
| 2 * GSM Layer 1 software | |
| 3 * L1P_CONS.H | |
| 4 * | |
| 5 * Filename l1p_cons.h | |
| 6 * Copyright 2003 (C) Texas Instruments | |
| 7 * | |
| 8 ************* Revision Controle System Header *************/ | |
| 9 | |
| 10 // TBF allocations... | |
| 11 #define DL_TBF 0 | |
| 12 #define UL_TBF 1 | |
| 13 #define BOTH_TBF 2 | |
| 14 #define SINGLE_BLOCK_DL 3 | |
| 15 #define SINGLE_BLOCK_UL 4 | |
| 16 #define TWO_PHASE_ACCESS 5 | |
| 17 #define NO_TBF 6 | |
| 18 | |
| 19 // MAC modes... | |
| 20 #define DYN_ALLOC 0 | |
| 21 #define EXT_DYN_ALLOC 1 | |
| 22 #define FIX_ALLOC_NO_HALF 2 | |
| 23 #define FIX_ALLOC_HALF 3 | |
| 24 | |
| 25 // First task after the Idle frame... | |
| 26 #define RX_TASK 1 | |
| 27 #define TX_TASK 2 | |
| 28 | |
| 29 // Status for interference measurement frame | |
| 30 #define ANY_IDLE_FRAME 0 | |
| 31 #define PTCCH_FRAME 1 | |
| 32 #define SEARCH_FRAME 2 | |
| 33 | |
| 34 // No measurement status | |
| 35 #define NO_MEAS 0x80 | |
| 36 | |
| 37 // Multislot bit of BBCTRL ABB register to set the multislot mode | |
| 38 #if (ANLG_FAM == 1) | |
| 39 #define B_MSLOT (0x40<<6) | |
| 40 #endif | |
| 41 #if ((ANLG_FAM == 2) || (ANLG_FAM == 3)) | |
| 42 #define B_MSLOT (0x20<<6) | |
| 43 #endif | |
| 44 | |
| 45 //---------------------------------------- | |
| 46 // LAYER 1 Asynchronous processes names... | |
| 47 //---------------------------------------- | |
| 48 #define NBR_L1PA_PROCESSES 11 | |
| 49 | |
| 50 #define PI_SCP 0 // l1pa_idle_paging_process(msg) | |
| 51 #define TRANSFER 1 // l1pa_transfer_process(msg) | |
| 52 #define P_ACC 2 // l1pa_access_process(msg) | |
| 53 #define P_POLL 3 // l1pa_idle_packet_polling_process(msg) | |
| 54 #define SCPB 4 // l1pa_serving_cell_pbcch_read_process(msg) | |
| 55 #define CR_MEAS 5 // l1pa_cr_meas_process(msg) | |
| 56 #define TCR_MEAS 6 // l1pa_tcr_meas_process(msg) | |
| 57 #define PI_INT_MEAS 7 // l1pa_idle_interference_meas_process(msg) | |
| 58 #define PT_INT_MEAS 8 // l1pa_transfer_interference_meas_process(msg) | |
| 59 #define NCPB 9 // l1pa_neighbor_cell_pbcch_read_process(msg) | |
| 60 #define PI_SMSCB 10 // l1pa_idle_smscb_process(msg) | |
| 61 | |
| 62 // Constants for PRACH | |
| 63 #define ACC_BURST_8 0 | |
| 64 #define ACC_BURST_11 1 | |
| 65 | |
| 66 #define DYN_PRACH_ALLOC 1 | |
| 67 #define FIX_PRACH_ALLOC 2 | |
| 68 | |
| 69 // DSP CS types (CHED) | |
| 70 //TABLE/ UL CS | |
| 71 #define CS_NONE_TYPE 0 //NAME/ No block | |
| 72 #define CS_AUTO_DETECT 1 //NAME/ N/A | |
| 73 #define CS1_TYPE_DATA 2 //NAME/ CS1 | |
| 74 #define CS1_TYPE_POLL 3 //NAME/ Poll NB | |
| 75 #define CS2_TYPE 4 //NAME/ CS2 | |
| 76 #define CS3_TYPE 5 //NAME/ CS3 | |
| 77 #define CS4_TYPE 6 //NAME/ CS4 | |
| 78 #define CS_PAB8_TYPE 7 //NAME/ PRACH 8bit | |
| 79 #define CS_PAB11_TYPE 8 //NAME/ PRACH 11bit | |
| 80 //END_TABLE/ | |
| 81 | |
| 82 // USF decoding for PRACH | |
| 83 #define USF_INVALID 0 | |
| 84 #define USF_GOOD 1 | |
| 85 #define USF_BAD 2 | |
| 86 #define USF_FREE 7 | |
| 87 | |
| 88 // DSP tasks | |
| 89 #define DL_PDSP_TASK 2 // Downlink task (Normal burst or Prach). | |
| 90 #define UL_PDSP_TASK 2 // Uplink task (Normal burst or Prach). | |
| 91 #define PB_PDSP_TASK 3 // Power measurement Burst task. | |
| 92 | |
| 93 // DSP tasks used in d_task_md | |
| 94 #define INTERF_DSP_TASK 100 // Interference measurements | |
| 95 #define INTERF1_DSP_TASK 101 // 1 Interference measurement | |
| 96 #define INTERF2_DSP_TASK 102 // 2 Interference measurement | |
| 97 #define INTERF3_DSP_TASK 103 // 3 Interference measurement | |
| 98 #define INTERF4_DSP_TASK 104 // 4 Interference measurement | |
| 99 #define INTERF5_DSP_TASK 105 // 5 Interference measurement | |
| 100 #define INTERF6_DSP_TASK 106 // 6 Interference measurement | |
| 101 #define INTERF7_DSP_TASK 107 // 7 Interference measurement | |
| 102 #define INTERF8_DSP_TASK 108 // 8 Interference measurement | |
| 103 #define PTCCHD_DSP_TASK 109 // PTCCH DL | |
| 104 #define PTCCHU_DSP_TASK 110 // PTCCH UL | |
| 105 #define PTCCHDU_DSP_TASK 111 // PTCCH DL and UL | |
| 106 | |
| 107 //--------------------------------------------- | |
| 108 // PTCCH activities | |
| 109 //--------------------------------------------- | |
| 110 #define PTCCH_DL_BIT 0 // PTCCH DL bit position | |
| 111 #define PTCCH_UL_BIT 1 // PTCCH UL bit position | |
| 112 | |
| 113 #define PTCCH_DL (TRUE_L << PTCCH_DL_BIT) | |
| 114 #define PTCCH_UL (TRUE_L << PTCCH_UL_BIT) | |
| 115 | |
| 116 //--------------------------------------------- | |
| 117 // SINGLE activities | |
| 118 //--------------------------------------------- | |
| 119 #define ALL_SINGLE 0xFF | |
| 120 #define SINGLE_DL_BIT 0 // SINGLE DL bit position | |
| 121 #define SINGLE_UL_BIT 1 // SINGLE UL bit position | |
| 122 | |
| 123 #define SINGLE_DL (TRUE_L << SINGLE_DL_BIT) | |
| 124 #define SINGLE_UL (TRUE_L << SINGLE_UL_BIT) | |
| 125 | |
| 126 #define SINGLE_DL_MASK ALL_TASK ^ SINGLE_DL | |
| 127 #define SINGLE_UL_MASK ALL_TASK ^ SINGLE_UL | |
| 128 | |
| 129 //--------------------------------------------- | |
| 130 // Status for MPHP_SINGLE_BLOCK_CON | |
| 131 //--------------------------------------------- | |
| 132 #define SINGLE_UL_DONE 0 | |
| 133 #define SINGLE_STI_PASSED 1 | |
| 134 #define SINGLE_NO_TA 2 | |
| 135 #define SINGLE_DL_DONE 3 | |
| 136 | |
| 137 | |
| 138 //--------------------------------------------- | |
| 139 // MCU-DSP bit-field bit position definitions | |
| 140 //--------------------------------------------- | |
| 141 // d_task_u_gprs... | |
| 142 #define B_ACCESS_PRACH 13 | |
| 143 #define B_PTCCH_UL 14 | |
| 144 | |
| 145 // d_task_d_gprs... | |
| 146 #define B_PTCCH_DL 14 | |
| 147 | |
| 148 // d_sched_mode_gprs... | |
| 149 #define B_SWITCH 0 // Bit 0: switch to GPRS, Bit 1: switch to GSM. | |
| 150 #define B_MAC_MODE 2 | |
| 151 #define B_RIF_RX_MODE 5 | |
| 152 | |
| 153 // a_ctrl_abb_gprs or d_ptcchu_ctrl_abb_gprs... | |
| 154 #define B_RAMP_GPRS 0 | |
| 155 #define B_APCDEL2_GPRS 2 | |
| 156 #define B_APCDEL1_GPRS 3 | |
| 157 #define B_AFC_GPRS 4 | |
| 158 #define B_RAMP_NB_GPRS 5 | |
| 159 #define B_MS_RULE 8 // set an additionnal interrupt for the DSP | |
| 160 | |
| 161 //--------------------------------------------- | |
| 162 // LAYER 1 PACKET PERIODIC MEASUREMENT TASKS... | |
| 163 //--------------------------------------------- | |
| 164 #define P_CRMS 0 // Packet Periodic Measurements task in Idle mode. | |
| 165 #define P_TCRMS 1 // Neighbour Measurement in Packet Transfer mode. | |
| 166 | |
| 167 #define P_CRMS_MEAS (TRUE_L << P_CRMS) // Set Packet Periodic Measurements task | |
| 168 #define P_TCRMS_MEAS (TRUE_L << P_TCRMS) // Set Neighbour Measurement Packet Transfer task | |
| 169 | |
| 170 #define P_CRMS_MEAS_MASK ALL_TASK ^ P_CRMS_MEAS // Mask Packet Periodic Measurement task | |
| 171 #define P_TCRMS_MEAS_MASK ALL_TASK ^ P_TCRMS_MEAS // Mask Neighbour Measurement Packet Transfer task | |
| 172 | |
| 173 //-------------------------------------------- | |
| 174 // Paging macro definition | |
| 175 //-------------------------------------------- | |
| 176 //-- Paging States used for PPCH reading blocks | |
| 177 #define PPCH_POS_NOT_COMP 0 | |
| 178 #define PPCH_POS_COMP 1 | |
| 179 | |
| 180 //-- Maximum Number of Packet Paging Blocks | |
| 181 #define MAX_NBR_PG_BLKS 11 | |
| 182 | |
| 183 //-- Paging Block index max | |
| 184 #define MAX_PG_BLKS_INDEX 10 | |
| 185 | |
| 186 //-------------------------------------------- | |
| 187 // PBCCH macro definition | |
| 188 //-------------------------------------------- | |
| 189 //-- Maximum Number of PBCCH Blocks | |
| 190 #define MAX_NBR_PB_BLKS 4 | |
| 191 | |
| 192 //-- PBCCH index max | |
| 193 #define MAX_PB_BLKS_INDEX 3 | |
| 194 | |
| 195 /*--------------------------------------------------------*/ | |
| 196 /* Position of different blocs in a MF52. */ | |
| 197 /*--------------------------------------------------------*/ | |
| 198 #define PCCCH_0 0 | |
| 199 #define PCCCH_1 4 | |
| 200 #define PCCCH_2 8 | |
| 201 #define PCCCH_3 13 | |
| 202 #define PCCCH_4 17 | |
| 203 #define PCCCH_5 21 | |
| 204 #define PCCCH_6 26 | |
| 205 #define PCCCH_7 30 | |
| 206 #define PCCCH_8 34 | |
| 207 #define PCCCH_9 39 | |
| 208 #define PCCCH_10 43 | |
| 209 #define PCCCH_11 47 | |
| 210 | |
| 211 //-- PBCCH block position | |
| 212 #define B0_POSITION 0L | |
| 213 #define B11_POSITION 47L | |
| 214 | |
| 215 // Power measurement constants | |
| 216 // mode for power measurements | |
| 217 #define PACKET_IDLE 1 | |
| 218 #define PACKET_TRANSFER 2 | |
| 219 // number of meas | |
| 220 #define NB_MEAS_PACKET_IDLE 4 // Normal case 1RX + 3PW, if no RX=> 4PW | |
| 221 | |
| 222 // TX burst types | |
| 223 #define TX_NB_BURST 0 | |
| 224 #define TX_RA_BURST 1 | |
| 225 | |
| 226 // No power control packet transfer AGC algorithm phases | |
| 227 #define SEARCH 0 | |
| 228 #define TRACK 1 | |
| 229 | |
| 230 /*--------------------------------------------------------*/ | |
| 231 /* API addresses......................... */ | |
| 232 /*--------------------------------------------------------*/ | |
| 233 #define DSP_API_ADDRESS_BASE 0x00000800L // | |
| 234 #define ARM_API_ADDRESS_BASE 0xFFD00000L // | |
| 235 | |
| 236 // Herebelow we define the MCU/DSP interface addresses as seen | |
| 237 // by the DSP (DSP address space) considering address 0 basis. | |
| 238 | |
| 239 #if (DSP == 33) || (DSP == 34) || (DSP == 35) || (DSP == 36) | |
| 240 #define DSP_MAP_DB_W_PAGE_0_GPRS 0x00000050L // | |
| 241 #define DSP_MAP_DB_W_PAGE_1_GPRS 0x00000064L // | |
| 242 #define DSP_MAP_DB_R_PAGE_0_GPRS 0x00000078L // | |
| 243 #define DSP_MAP_DB_R_PAGE_1_GPRS 0x0000009CL // | |
| 244 #define DSP_MAP_NDB_ADR_GPRS 0x000001AEL // | |
| 245 #define DSP_MAP_PARAM_ADR_GPRS 0x00000480L // | |
| 246 #else | |
| 247 #define DSP_MAP_DB_W_PAGE_0_GPRS 0x000004ADL // | |
| 248 #define DSP_MAP_DB_W_PAGE_1_GPRS 0x000004C1L // | |
| 249 #define DSP_MAP_DB_R_PAGE_0_GPRS 0x000004D5L // | |
| 250 #define DSP_MAP_DB_R_PAGE_1_GPRS 0x000004F9L // | |
| 251 #define DSP_MAP_NDB_ADR_GPRS 0x00000056L // | |
| 252 #define DSP_MAP_PARAM_ADR_GPRS 0x000001F1L // | |
| 253 #endif | |
| 254 | |
| 255 // Herebelow we define the MCU/DSP interface addresses as seen | |
| 256 // by the MCU (ARM address space) considering . | |
| 257 | |
| 258 #define DB_W_PAGE_0_GPRS (ARM_API_ADDRESS_BASE + (DSP_MAP_DB_W_PAGE_0_GPRS * 2)) // | |
| 259 #define DB_W_PAGE_1_GPRS (ARM_API_ADDRESS_BASE + (DSP_MAP_DB_W_PAGE_1_GPRS * 2)) // | |
| 260 #define DB_R_PAGE_0_GPRS (ARM_API_ADDRESS_BASE + (DSP_MAP_DB_R_PAGE_0_GPRS * 2)) // | |
| 261 #define DB_R_PAGE_1_GPRS (ARM_API_ADDRESS_BASE + (DSP_MAP_DB_R_PAGE_1_GPRS * 2)) // | |
| 262 #define NDB_ADR_GPRS (ARM_API_ADDRESS_BASE + (DSP_MAP_NDB_ADR_GPRS * 2)) // | |
| 263 #define PARAM_ADR_GPRS (ARM_API_ADDRESS_BASE + (DSP_MAP_PARAM_ADR_GPRS * 2)) // |