view chipsetsw/services/atp/atp_cmd.h @ 349:ed3e588600c1 default tip

README update for the successful completion of the L1 reconstruction project
author Mychaela Falconia <falcon@freecalypso.org>
date Mon, 30 Oct 2017 18:03:24 +0000
parents 509db1a7b7b8
children
line wrap: on
line source

/********************************************************************************
 *
 * File Name : atp_cmd.h
 *
 * External definition for commands supported by ATP
 *
 * (C) Texas Instruments, all rights reserved
 *
 * Version number   : 0.1 - 03-03-2000
 *
 * History          : 0.1 - Created by E. Baissus
 *
 * Author           : Eric Baissus : e-baissus@ti.com
 *
 *   (C) Copyright 2000 by Texas Instruments Incorporated, All Rights Reserved
 *
 ********************************************************************************/
#include "rv/rv_general.h"
#include "rvf/rvf_api.h"
#include "atp/atp_config.h"
#include "atp/atp_api.h"

#include <stdlib.h>

#ifndef ATP_CMD_H
#define ATP_CMD_H


/************************** LOCAL DCE-DTE PORT CONTROL **************************/
/*                                                                              */
/* Define the number of word needed to mask the commands executed by the ATP.   */
#define NB_WORD_OF_DCE_CMD_MASK                       (0x01) 

/* Define the default command line termination character (See ITU-T             */
/* Recommendation V.250 ter page 21).                                           */
#define ATP_CR_CHARACTER                              ('\x0D')

/* Define the default response formatting character (See ITU-T Recommendation   */
/* V.250 ter page 22).                                                          */
#define ATP_LF_CHARACTER                              ('\x0A')

/* Define the default command line editing character (See ITU-T Recommendation  */
/* V.250 ter page 22).                                                          */
#define ATP_BS_CHARACTER                              ('\x08')

/* Define the escape sequence (See ITU-T Recommendation V.250 ter page 24).     */
#define MAX_NB_OF_CHARACTER_FOR_END_SEQUENCE          (0x03)

static const char ATP_ESCAPE_SEQUENCE[] = "+++";

/* Define the command echo (See ITU-T Recommendation V.250 ter page 23).        */
typedef enum
{
	ECHO_OFF = 0x00000000,
	ECHO_ON
} T_ATP_ECHO_MODE;

/* Define the result code suppression (See ITU-T Recommendation V.250 ter page  */
/* 23).                                                                         */
typedef enum
{
	RESULT_CODE_ON = 0x00000000,
	RESULT_CODE_OFF
} T_ATP_RESULT_CODE_MODE;

/* Define the DCE response format (See ITU-T Recommendation V.250 ter page 24). */
typedef enum
{
	ATP_VERBOSE_0 = 0x00000000,
	ATP_VERBOSE_1
} T_ATP_VERBOSE_MODE;

/* Define the structure used to store information related to DCE handling. Note */
/* that 'nb_plus_received' indicates the number of escape characters that have  */
/* been previously received (refer to 'escape_sequence_tmp_buffer_p').          */
typedef UINT16  T_ATP_DCE_MASK[NB_WORD_OF_DCE_CMD_MASK];

typedef struct
{
	char                    cr_character;
	char                    lf_character;
	char                    bs_character;
	char                    escape_sequence[MAX_NB_OF_CHARACTER_FOR_END_SEQUENCE];
	T_ATP_ECHO_MODE         echo_mode;
	T_ATP_RESULT_CODE_MODE  result_code_mode;
	T_ATP_VERBOSE_MODE      verbose_mode;
	T_ATP_DCE_MASK          dce_mask;
	UINT8                   nb_plus_received;
	UINT8                   *escape_sequence_tmp_buffer_p[MAX_NB_OF_CHARACTER_FOR_END_SEQUENCE];
	UINT8                   length_of_escape_sequence_tmp_buffer_p[MAX_NB_OF_CHARACTER_FOR_END_SEQUENCE];
} T_ATP_DCE_INFO;


/********************************** AT COMMANDS *********************************/
/*                                                                              */
/* Define all supported AT commands.                                            */
/*  __________________________________________________________________________  */
/* |                   |     |         |                                      | */
/* |    Binary code    | Len | Command |              Description             | */
/* |___________________|_____|_________|______________________________________| */
/* |                   |     |         |                                      | */
/* |    ATP_ATA_NB     |  1  |   ATA   | Answer.                              | */
/* |    ATP_ATD_NB     |  1  |   ATD   | Dial.                                | */
/* |    ATP_ATE_NB     |  1  |   ATE   | Command echo.                        | */
/* |    ATP_ATH_NB     |  1  |   ATH   | Hook control.                        | */
/* |    ATP_ATI_NB     |  1  |   ATI   | Request Identification Information   | */
/* |    ATP_ATL_NB     |  1  |   ATL   | Monitor speaker loudness.            | */
/* |    ATP_ATM_NB     |  1  |   ATM   | Monitor speaker mode.                | */
/* |    ATP_ATO_NB     |  1  |   ATO   | Return to online data state.         | */
/* |    ATP_ATP_NB     |  1  |   ATP   | Select pulse dialling.               | */
/* |    ATP_ATQ_NB     |  1  |   ATQ   | Result code suppression.             | */
/* |    ATP_ATS0_NB    |  2  |   ATS0  | Automatic answer.                    | */
/* |    ATP_ATS10_NB   |  3  |  ATS10  | Automatic disconnect delay.          | */
/* |    ATP_ATS3_NB    |  2  |   ATS3  | Command line termination character.  | */
/* |    ATP_ATS4_NB    |  2  |   ATS4  | Response formatting character.       | */
/* |    ATP_ATS5_NB    |  2  |   ATS5  | Command line editing character.      | */
/* |    ATP_ATS6_NB    |  2  |   ATS6  | Pause before blind dialling.         | */
/* |    ATP_ATS7_NB    |  2  |   ATS7  | Connection completion timeout.       | */
/* |    ATP_ATS8_NB    |  2  |   ATS8  | Comma dial modifier time.            | */
/* |    ATP_ATT_NB     |  1  |   ATT   | Select tone dialling.                | */
/* |    ATP_ATV_NB     |  1  |   ATV   | DCE response format.                 | */
/* |    ATP_ATX_NB     |  1  |   ATX   | Result code selection and call       | */
/* |                   |     |         | progress monitoring control.         | */
/* |    ATP_ATZ_NB     |  1  |   ATZ   | Reset to default configuration.      | */
/* |  ATP_AT_AND_C_NB  |  2  |   AT&C  | Circuit 109 (received line signal    | */
/* |                   |     |         | detector) behavior.                  | */
/* |  ATP_AT_AND_D_NB  |  2  |   AT&D  | Circuit 108 (data terminal ready)    | */
/* |                   |     |         | behavior.                            | */
/* |  ATP_AT_AND_F_NB  |  2  |   AT&F  | Set to factory defined               | */
/* |                   |     |         | configuration.                       | */
/* |___________________|_____|_________|______________________________________| */
/* |                   |     |         |                                      | */
/* |ATP_AT_PLUS_CKPD_NB|  5  | AT+CKPD | Keypad control command (See GSM TS   | */
/* |                   |     |         | 07.07, Section 8.7). For <keys>, the | */
/* |                   |     |         | value of 200 indicates the button on | */
/* |                   |     |         | the headset being pushed. The <time> | */
/* |                   |     |         | and <pause> parameters have no       | */
/* |                   |     |         | meaning in the headset profile.      | */
/* |ATP_AT_PLUS_FDR_NB |  4  | AT+FDR  | Receive a page.                      | */
/* |ATP_AT_PLUS_FDT_NB |  4  | AT+FDT  | Send a page.                         | */
/* |ATP_AT_PLUS_FKS_NB |  4  | AT+FKS  | Session termination.                 | */
/* |ATP_AT_PLUS_GMI_NB |  4  | AT+GMI  | Request manufacturer identification. | */
/* |ATP_AT_PLUS_GMM_NB |  4  | AT+GMM  | Request model identification.        | */
/* |ATP_AT_PLUS_GMR_NB |  4  | AT+GMR  | Request revision identification.     | */
/* |ATP_AT_PLUS_GCAP_NB|  5  | AT+GCAP | Request complete capabilities list.  | */
/* |ATP_AT_PLUS_VGM_NB |  4  | AT+VGM  | Command issued by the HS to report   | */
/* |                   |     |         | the current microphone gain level    | */
/* |                   |     |         | setting to the AG (See Headset       | */
/* |                   |     |         | Specification, Section 4.7.3).       | */
/* |ATP_AT_PLUS_VGS_NB |  4  | AT+VGS  | Command issued by the HS to report   | */
/* |                   |     |         | the current speaker gain level       | */
/* |                   |     |         | setting to the AG (See Headset       | */
/* |                   |     |         | Specification, Section 4.7.3).       | */
/* |___________________|_____|_________|______________________________________| */
/*                                                                              */
/* Define the command line prefix "AT" (See ITU-T Recommendation V.250 ter page */
/* page 4).                                                                     */
#define ATP_AT_PREFIX                                 ("AT")
#define ATP_AT_PREFIX_LEN                             (0x02)

/* Text codes for AT commands.                                                  */
static const char ATP_AT_TXT_TABLE[] = {'A', \
										'D', \
										'E', \
										'H', \
										'I', \
										'L', \
										'M', \
										'O', \
										'P', \
										'Q', \
										'S', '0', \
										'S', '1', '0', \
										'S', '3', \
										'S', '4', \
										'S', '5', \
										'S', '6', \
										'S', '7', \
										'S', '8', \
										'T', \
										'V', \
										'X', \
										'Z', \
										'&', 'C', \
										'&', 'D', \
										'&', 'F', \
										'+', 'C', 'K', 'P', 'D', \
										'+', 'F', 'D', 'R', \
										'+', 'F', 'D', 'T', \
										'+', 'F', 'K', 'S', \
										'+', 'G', 'M', 'I', \
										'+', 'G', 'M', 'M', \
										'+', 'G', 'M', 'R', \
										'+', 'G', 'C', 'A', 'P', \
										'+', 'V', 'G', 'M', \
										'+', 'V', 'G', 'S', \
										'\xFF'};

/* Binary related codes.                                                        */
typedef enum
{
	ATP_ATA_NB = (0x00000000),
	ATP_ATD_NB,
	ATP_ATE_NB,
	ATP_ATH_NB,
	ATP_ATI_NB,
	ATP_ATL_NB,
	ATP_ATM_NB,
	ATP_ATO_NB,
	ATP_ATP_NB,
	ATP_ATQ_NB,
	ATP_ATS0_NB,
	ATP_ATS10_NB,
	ATP_ATS3_NB,
	ATP_ATS4_NB,
	ATP_ATS5_NB,
	ATP_ATS6_NB,
	ATP_ATS7_NB,
	ATP_ATS8_NB,
	ATP_ATT_NB,
	ATP_ATV_NB,
	ATP_ATX_NB,
	ATP_ATZ_NB,
	ATP_AT_AND_C_NB,
	ATP_AT_AND_D_NB,
	ATP_AT_AND_F_NB,
	ATP_AT_PLUS_CKPD_NB,
	ATP_AT_PLUS_FDR_NB,
	ATP_AT_PLUS_FDT_NB,
	ATP_AT_PLUS_FKS_NB,
	ATP_AT_PLUS_GMI_NB,
	ATP_AT_PLUS_GMM_NB,
	ATP_AT_PLUS_GMR_NB,
	ATP_AT_PLUS_GCAP_NB,
	ATP_AT_PLUS_VGM_NB,
	ATP_AT_PLUS_VGS_NB,
	ATP_MAX_NB_OF_AT_COMMANDS
} T_ATP_BINARY_AT_COMMANDS;

/* Related offsets.                                                             */
#define ATP_ATA_OFFSET                                (0x00)
#define ATP_ATD_OFFSET                                (ATP_ATA_OFFSET + 0x01)
#define ATP_ATE_OFFSET                                (ATP_ATD_OFFSET + 0x01)
#define ATP_ATH_OFFSET                                (ATP_ATE_OFFSET + 0x01)
#define ATP_ATI_OFFSET                                (ATP_ATH_OFFSET + 0x01)
#define ATP_ATL_OFFSET                                (ATP_ATI_OFFSET + 0x01)
#define ATP_ATM_OFFSET                                (ATP_ATL_OFFSET + 0x01)
#define ATP_ATO_OFFSET                                (ATP_ATM_OFFSET + 0x01)
#define ATP_ATP_OFFSET                                (ATP_ATO_OFFSET + 0x01)
#define ATP_ATQ_OFFSET                                (ATP_ATP_OFFSET + 0x01)
#define ATP_ATS0_OFFSET                               (ATP_ATQ_OFFSET + 0x01)
#define ATP_ATS10_OFFSET                              (ATP_ATS0_OFFSET + 0x02)
#define ATP_ATS3_OFFSET                               (ATP_ATS10_OFFSET + 0x03)
#define ATP_ATS4_OFFSET                               (ATP_ATS3_OFFSET + 0x02)
#define ATP_ATS5_OFFSET                               (ATP_ATS4_OFFSET + 0x02)
#define ATP_ATS6_OFFSET                               (ATP_ATS5_OFFSET + 0x02)
#define ATP_ATS7_OFFSET                               (ATP_ATS6_OFFSET + 0x02)
#define ATP_ATS8_OFFSET                               (ATP_ATS7_OFFSET + 0x02)
#define ATP_ATT_OFFSET                                (ATP_ATS8_OFFSET + 0x02)
#define ATP_ATV_OFFSET                                (ATP_ATT_OFFSET + 0x01)
#define ATP_ATX_OFFSET                                (ATP_ATV_OFFSET + 0x01)
#define ATP_ATZ_OFFSET                                (ATP_ATX_OFFSET + 0x01)
#define ATP_AT_AND_C_OFFSET                           (ATP_ATZ_OFFSET + 0x01)
#define ATP_AT_AND_D_OFFSET                           (ATP_AT_AND_C_OFFSET + 0x02)
#define ATP_AT_AND_F_OFFSET                           (ATP_AT_AND_D_OFFSET + 0x02)
#define ATP_AT_PLUS_CKPD_OFFSET                       (ATP_AT_AND_F_OFFSET + 0x02)
#define ATP_AT_PLUS_FDR_OFFSET                        (ATP_AT_PLUS_CKPD_OFFSET + 0x05)
#define ATP_AT_PLUS_FDT_OFFSET                        (ATP_AT_PLUS_FDR_OFFSET + 0x04)
#define ATP_AT_PLUS_FKS_OFFSET                        (ATP_AT_PLUS_FDT_OFFSET + 0x04)
#define ATP_AT_PLUS_GMI_OFFSET                        (ATP_AT_PLUS_FKS_OFFSET + 0x04)
#define ATP_AT_PLUS_GMM_OFFSET                        (ATP_AT_PLUS_GMI_OFFSET + 0x04)
#define ATP_AT_PLUS_GMR_OFFSET                        (ATP_AT_PLUS_GMM_OFFSET + 0x04)
#define ATP_AT_PLUS_GCAP_OFFSET                       (ATP_AT_PLUS_GMR_OFFSET + 0x04)
#define ATP_AT_PLUS_VGM_OFFSET                        (ATP_AT_PLUS_GCAP_OFFSET + 0x05)
#define ATP_AT_PLUS_VGS_OFFSET                        (ATP_AT_PLUS_VGM_OFFSET + 0x04)
#define ATP_AT_LAST_OFFSET                            (ATP_AT_PLUS_VGS_OFFSET + 0x04)

/* Related structures.                                                          */
typedef enum
{
	ATP_CMD_NOT_DEFINED = (0x00000000),
	ATP_NO_PARAM,
	ATP_BASIC_PARAM,
	ATP_DIAL_PARAM,
	ATP_S_PARAM,
	ATP_NO_EXTENDED_PARAM,
	ATP_SINGLE_EXTENDED_PARAM,
	ATP_PLUS_CKPD_PARAM
} T_ATP_CMD_FORMAT;

#define ATP_ATA_PARAM                                 (ATP_NO_PARAM)
#define ATP_ATD_PARAM                                 (ATP_DIAL_PARAM)
#define ATP_ATE_PARAM                                 (ATP_BASIC_PARAM)
#define ATP_ATH_PARAM                                 (ATP_BASIC_PARAM)
#define ATP_ATI_PARAM                                 (ATP_BASIC_PARAM)
#define ATP_ATL_PARAM                                 (ATP_BASIC_PARAM)
#define ATP_ATM_PARAM                                 (ATP_BASIC_PARAM)
#define ATP_ATO_PARAM                                 (ATP_BASIC_PARAM)
#define ATP_ATP_PARAM                                 (ATP_NO_PARAM)
#define ATP_ATQ_PARAM                                 (ATP_BASIC_PARAM)
#define ATP_ATS0_PARAM                                (ATP_S_PARAM)
#define ATP_ATS10_PARAM                               (ATP_S_PARAM)
#define ATP_ATS3_PARAM                                (ATP_S_PARAM)
#define ATP_ATS4_PARAM                                (ATP_S_PARAM)
#define ATP_ATS5_PARAM                                (ATP_S_PARAM)
#define ATP_ATS6_PARAM                                (ATP_S_PARAM)
#define ATP_ATS7_PARAM                                (ATP_S_PARAM)
#define ATP_ATS8_PARAM                                (ATP_S_PARAM)
#define ATP_ATT_PARAM                                 (ATP_NO_PARAM)
#define ATP_ATV_PARAM                                 (ATP_BASIC_PARAM)
#define ATP_ATX_PARAM                                 (ATP_BASIC_PARAM)
#define ATP_ATZ_PARAM                                 (ATP_BASIC_PARAM)
#define ATP_AT_AND_C_PARAM                            (ATP_BASIC_PARAM)
#define ATP_AT_AND_D_PARAM                            (ATP_BASIC_PARAM)
#define ATP_AT_AND_F_PARAM                            (ATP_BASIC_PARAM)
#define ATP_AT_PLUS_CKPD_PARAM                        (ATP_PLUS_CKPD_PARAM)
#define ATP_AT_PLUS_FDR_PARAM                         (ATP_NO_EXTENDED_PARAM)
#define ATP_AT_PLUS_FDT_PARAM                         (ATP_NO_EXTENDED_PARAM)
#define ATP_AT_PLUS_FKS_PARAM                         (ATP_NO_EXTENDED_PARAM)
#define ATP_AT_PLUS_GMI_PARAM                         (ATP_NO_EXTENDED_PARAM)
#define ATP_AT_PLUS_GMM_PARAM                         (ATP_NO_EXTENDED_PARAM)
#define ATP_AT_PLUS_GMR_PARAM                         (ATP_NO_EXTENDED_PARAM)
#define ATP_AT_PLUS_GCAP_PARAM                        (ATP_NO_EXTENDED_PARAM)
#define ATP_AT_PLUS_VGM_PARAM                         (ATP_SINGLE_EXTENDED_PARAM)
#define ATP_AT_PLUS_VGS_PARAM                         (ATP_SINGLE_EXTENDED_PARAM)

#define ATP_AT_OFFSET_COLUMN                          (0x00)
#define ATP_AT_PARAM_COLUMN                           (0x01)

static const UINT8 ATP_AT_INFO[ATP_MAX_NB_OF_AT_COMMANDS + 0x01][0x02] \
					 = {{ATP_ATA_OFFSET,		  ATP_ATA_PARAM}, \
						{ATP_ATD_OFFSET,		  ATP_ATD_PARAM}, \
						{ATP_ATE_OFFSET,		  ATP_ATE_PARAM}, \
						{ATP_ATH_OFFSET,		  ATP_ATH_PARAM}, \
						{ATP_ATI_OFFSET,		  ATP_ATI_PARAM}, \
						{ATP_ATL_OFFSET,		  ATP_ATL_PARAM}, \
						{ATP_ATM_OFFSET,		  ATP_ATM_PARAM}, \
						{ATP_ATO_OFFSET,		  ATP_ATO_PARAM}, \
						{ATP_ATP_OFFSET,		  ATP_ATP_PARAM}, \
						{ATP_ATQ_OFFSET,		  ATP_ATQ_PARAM}, \
						{ATP_ATS0_OFFSET,		  ATP_ATS0_PARAM}, \
						{ATP_ATS10_OFFSET,		  ATP_ATS10_PARAM}, \
						{ATP_ATS3_OFFSET,		  ATP_ATS3_PARAM}, \
						{ATP_ATS4_OFFSET,		  ATP_ATS4_PARAM}, \
						{ATP_ATS5_OFFSET,		  ATP_ATS5_PARAM}, \
						{ATP_ATS6_OFFSET,		  ATP_ATS6_PARAM}, \
						{ATP_ATS7_OFFSET,		  ATP_ATS7_PARAM}, \
						{ATP_ATS8_OFFSET,		  ATP_ATS8_PARAM}, \
						{ATP_ATT_OFFSET,		  ATP_ATT_PARAM}, \
						{ATP_ATV_OFFSET,		  ATP_ATV_PARAM}, \
						{ATP_ATX_OFFSET,		  ATP_ATX_PARAM}, \
						{ATP_ATZ_OFFSET,		  ATP_ATZ_PARAM}, \
						{ATP_AT_AND_C_OFFSET,	  ATP_AT_AND_C_PARAM}, \
						{ATP_AT_AND_D_OFFSET,	  ATP_AT_AND_D_PARAM}, \
						{ATP_AT_AND_F_OFFSET,	  ATP_AT_AND_F_PARAM}, \
						{ATP_AT_PLUS_CKPD_OFFSET, ATP_AT_PLUS_CKPD_PARAM}, \
						{ATP_AT_PLUS_FDR_OFFSET,  ATP_AT_PLUS_FDR_PARAM}, \
						{ATP_AT_PLUS_FDT_OFFSET,  ATP_AT_PLUS_FDT_PARAM}, \
						{ATP_AT_PLUS_FKS_OFFSET,  ATP_AT_PLUS_FKS_PARAM}, \
						{ATP_AT_PLUS_GMI_OFFSET,  ATP_AT_PLUS_GMI_PARAM}, \
						{ATP_AT_PLUS_GMM_OFFSET,  ATP_AT_PLUS_GMM_PARAM}, \
						{ATP_AT_PLUS_GMR_OFFSET,  ATP_AT_PLUS_GMR_PARAM}, \
						{ATP_AT_PLUS_GCAP_OFFSET, ATP_AT_PLUS_GCAP_PARAM}, \
						{ATP_AT_PLUS_VGM_OFFSET,  ATP_AT_PLUS_VGM_PARAM}, \
						{ATP_AT_PLUS_VGS_OFFSET,  ATP_AT_PLUS_VGS_PARAM}, \
						{ATP_AT_LAST_OFFSET,	  ATP_CMD_NOT_DEFINED}};

/* Define the maximum length (text format) of <numbers> appearing in basic      */
/* syntax commands.                                                             */
/*    - <number> (up to 65535).                                                 */
#define MAX_BASIC_CMD_PARAM_LEN                       (0x05)

/* Define the structure associated with basic syntax commands (except for the   */
/* D and S commands). The format of such commands is <command>[<number>], where */
/* <number> may be a string of one or more characters from "0" through "9"      */
/* representing the decimal integer value (See ITU-T Recommendation V.250 ter   */
/* page 5).                                                                     */
typedef struct
{
	UINT16  number;
} T_ATP_BASIC_CMD;

/* Define all basic syntax commands do not expext any <number>.                 */
/*  __________________________________________________________________________  */
/* |                   |     |         |                                      | */
/* |    Binary code    | Len | Command |              Description             | */
/* |___________________|_____|_________|______________________________________| */
/* |                   |     |         |                                      | */
/* |    ATP_ATA_NB     |  1  |   ATA   | Answer.                              | */
/* |    ATP_ATP_NB     |  1  |   ATP   | Select pulse dialling.               | */
/* |    ATP_ATT_NB     |  1  |   ATT   | Select tone dialling.                | */
/* |___________________|_____|_________|______________________________________| */
/*                                                                              */
/* Define all other basic syntax commands.                                      */
/*  __________________________________________________________________________  */
/* |                   |     |         |                                      | */
/* |    Binary code    | Len | Command |              Description             | */
/* |___________________|_____|_________|______________________________________| */
/* |                   |     |         |                                      | */
/* |    ATP_ATE_NB     |  1  |   ATE   | Command echo.                        | */
/* |    ATP_ATH_NB     |  1  |   ATH   | Hook control.                        | */
/* |    ATP_ATI_NB     |  1  |   ATI   | Request Identification Information   | */
/* |    ATP_ATL_NB     |  1  |   ATL   | Monitor speaker loudness.            | */
/* |    ATP_ATM_NB     |  1  |   ATM   | Monitor speaker mode.                | */
/* |    ATP_ATO_NB     |  1  |   ATO   | Return to online data state.         | */
/* |    ATP_ATQ_NB     |  1  |   ATQ   | Result code suppression.             | */
/* |    ATP_ATV_NB     |  1  |   ATV   | DCE response format.                 | */
/* |    ATP_ATX_NB     |  1  |   ATX   | Result code selection and call       | */
/* |                   |     |         | progress monitoring control.         | */
/* |    ATP_ATZ_NB     |  1  |   ATZ   | Reset to default configuration.      | */
/* |  ATP_AT_AND_C_NB  |  2  |   AT&C  | Circuit 109 (received line signal    | */
/* |                   |     |         | detector) behavior.                  | */
/* |  ATP_AT_AND_D_NB  |  2  |   AT&D  | Circuit 108 (data terminal ready)    | */
/* |                   |     |         | behavior.                            | */
/* |  ATP_AT_AND_F_NB  |  2  |   AT&F  | Set to factory defined               | */
/* |                   |     |         | configuration.                       | */
/* |___________________|_____|_________|______________________________________| */
typedef T_ATP_BASIC_CMD  T_ATP_ATE_PARAM;
typedef T_ATP_BASIC_CMD  T_ATP_ATH_PARAM;
typedef T_ATP_BASIC_CMD  T_ATP_ATI_PARAM;
typedef T_ATP_BASIC_CMD  T_ATP_ATL_PARAM;
typedef T_ATP_BASIC_CMD  T_ATP_ATM_PARAM;
typedef T_ATP_BASIC_CMD  T_ATP_ATO_PARAM;
typedef T_ATP_BASIC_CMD  T_ATP_ATQ_PARAM;
typedef T_ATP_BASIC_CMD  T_ATP_ATV_PARAM;
typedef T_ATP_BASIC_CMD  T_ATP_ATX_PARAM;
typedef T_ATP_BASIC_CMD  T_ATP_ATZ_PARAM;
typedef T_ATP_BASIC_CMD  T_ATP_AT_AND_C_PARAM;
typedef T_ATP_BASIC_CMD  T_ATP_AT_AND_D_PARAM;
typedef T_ATP_BASIC_CMD  T_ATP_AT_AND_F_PARAM;

/* Define the maximum number of characters appearing in the <dial_string>.      */
#define MAX_DIAL_STRING_LEN                           (30)

/* Define the structure associated with "Dial" command whose format is          */
/* D[<dial_string>][;] (See ITU-T Recommendation V.250 ter page 31). Note that  */
/* all characters appearing on the same command line after D are considered     */
/* part of the call addressing information to be signalled to the network, or   */
/* modifiers used to control the signalling process, up to a semicolon          */
/* character or the end of the command line. If the <dial_string> is terminated */
/* by a semicolon, the DCE does not start the call origination procedure, but   */
/* instead returns to command state after completion of the signalling of call  */
/* addressing information to the network.                                       */
typedef struct
{
	char   dial_string_p[MAX_DIAL_STRING_LEN];
	UINT8  dial_string_length;
	enum
	{
		DATA_CALL = 0x00000000,
		VOICE_CALL
	} call_type;
} T_ATP_DIAL;

/* Define all dial commands.                                                    */
/*  __________________________________________________________________________  */
/* |                   |     |         |                                      | */
/* |    Binary code    | Len | Command |              Description             | */
/* |___________________|_____|_________|______________________________________| */
/* |                   |     |         |                                      | */
/* |    ATP_ATD_NB     |  1  |   ATD   | Dial.                                | */
/* |___________________|_____|_________|______________________________________| */
typedef T_ATP_DIAL  T_ATP_ATD_PARAM;

/* Define the maximum length (text format) of <values> appearing in             */
/* S-parameters.                                                                */
/*    - '=' + <value> (up to 65535).                                            */
#define MAX_S_PARAM_LEN                               (0x06)

/* Define the structure associated with S-parameters. Formats of such commands  */
/* are S<parameter_number>? and S<parameter_number>=[<value>], where <value>    */
/* shall consist of a decimal constant  (See ITU-T Recommendation V.250 ter     */
/* pages 5 and 6).                                                              */
typedef struct
{
	enum
	{
		READ_S_PARAM = 0x00000001,
		SET_S_PARAM
	} s_operator;
	UINT16  value;
} T_ATP_S_PARAM;

/* Define all S-parameters.                                                     */
/*  __________________________________________________________________________  */
/* |                   |     |         |                                      | */
/* |    Binary code    | Len | Command |              Description             | */
/* |___________________|_____|_________|______________________________________| */
/* |                   |     |         |                                      | */
/* |    ATP_ATS0_NB    |  2  |   ATS0  | Automatic answer.                    | */
/* |    ATP_ATS10_NB   |  3  |  ATS10  | Automatic disconnect delay.          | */
/* |    ATP_ATS3_NB    |  2  |   ATS3  | Command line termination character.  | */
/* |    ATP_ATS4_NB    |  2  |   ATS4  | Response formatting character.       | */
/* |    ATP_ATS5_NB    |  2  |   ATS5  | Command line editing character.      | */
/* |    ATP_ATS6_NB    |  2  |   ATS6  | Pause before blind dialling.         | */
/* |    ATP_ATS7_NB    |  2  |   ATS7  | Connection completion timeout.       | */
/* |    ATP_ATS8_NB    |  2  |   ATS8  | Comma dial modifier time.            | */
/* |___________________|_____|_________|______________________________________| */
typedef T_ATP_S_PARAM  T_ATP_ATS0_PARAM;
typedef T_ATP_S_PARAM  T_ATP_ATS10_PARAM;
typedef T_ATP_S_PARAM  T_ATP_ATS3_PARAM;
typedef T_ATP_S_PARAM  T_ATP_ATS4_PARAM;
typedef T_ATP_S_PARAM  T_ATP_ATS5_PARAM;
typedef T_ATP_S_PARAM  T_ATP_ATS6_PARAM;
typedef T_ATP_S_PARAM  T_ATP_ATS7_PARAM;
typedef T_ATP_S_PARAM  T_ATP_ATS8_PARAM;

/* Define operators dedicated to extended syntax commands. "=" is used to set   */
/* the indicated extended syntax command to a new value (See ITU-T              */
/* Recommendation V.250 ter page 8). Note that if no value is given, the        */
/* extended syntax command specified may be set to 0. "?" is used to read the   */
/* current value of the indicated extended syntax command (See ITU-T            */
/* Recommendation V.250 ter page 9). "=?" is used to test whether the extended  */
/* syntax command is implemented in the DCE.                                    */
typedef enum
{
	NO_SUBPARAMETER = 0x00000000,
	READ_EXTENDED_CMD,
	SET_EXTENDED_CMD,
	TEST_EXTENDED_CMD
} T_ATP_EXTENDED_OPERATOR;

/* Define the maximum length (text format) of extended syntax commands that     */
/* have no subparameter.                                                        */
/*    - '=?'.                                                                   */
#define MAX_NO_SUBPARAMETER_LEN                       (0x02)

/* Define the structure associated with extended syntax commands that have no   */
/* subparameter. Formats of such commands are +<name> and +<name>=?, where      */
/* <name> may be a string of one or sixteen characters selected from the        */
/* following set (See ITU-T Recommendation V.250 ter page 6):                   */
/*   "A" through "Z",                                                           */
/*   "0" through "9",                                                           */
/*   "!", "%", "-", ".", "/", ":" and "_".                                      */
typedef struct
{
	T_ATP_EXTENDED_OPERATOR  extended_operator;
} T_ATP_NO_SUBPARAMETER;

/* Define all extended syntax commands do not expext any <value>.               */
/*  __________________________________________________________________________  */
/* |                   |     |         |                                      | */
/* |    Binary code    | Len | Command |              Description             | */
/* |___________________|_____|_________|______________________________________| */
/* |                   |     |         |                                      | */
/* |ATP_AT_PLUS_FDR_NB |  4  | AT+FDR  | Receive a page.                      | */
/* |ATP_AT_PLUS_FDT_NB |  4  | AT+FDT  | Send a page.                         | */
/* |ATP_AT_PLUS_FKS_NB |  4  | AT+FKS  | Session termination.                 | */
/* |ATP_AT_PLUS_GMI_NB |  4  | AT+GMI  | Request manufacturer identification. | */
/* |ATP_AT_PLUS_GMM_NB |  4  | AT+GMM  | Request model identification.        | */
/* |ATP_AT_PLUS_GMR_NB |  4  | AT+GMR  | Request revision identification.     | */
/* |ATP_AT_PLUS_GCAP_NB|  5  | AT+GCAP | Request complete capabilities list.  | */
/* |___________________|_____|_________|______________________________________| */
typedef T_ATP_NO_SUBPARAMETER  T_ATP_AT_PLUS_FDR_PARAM;
typedef T_ATP_NO_SUBPARAMETER  T_ATP_AT_PLUS_FDT_PARAM;
typedef T_ATP_NO_SUBPARAMETER  T_ATP_AT_PLUS_FKS_PARAM;
typedef T_ATP_NO_SUBPARAMETER  T_ATP_AT_PLUS_GMI_PARAM;
typedef T_ATP_NO_SUBPARAMETER  T_ATP_AT_PLUS_GMM_PARAM;
typedef T_ATP_NO_SUBPARAMETER  T_ATP_AT_PLUS_GMR_PARAM;
typedef T_ATP_NO_SUBPARAMETER  T_ATP_AT_PLUS_GCAP_PARAM;

/* Define the maximum length (text format) of <values> appearing in extended    */
/* syntax commands whose subparameter is a numeric constant.                    */
/*    - '=' + <value> (up to 65535).                                            */
#define MAX_SINGLE_SUBPARAMETER_LEN                   (0x06)

/* Define the structure associated with extended syntax commands whose          */
/* subparameter is a numeric constant. Formats of such commands are +<name>?,   */
/* +<name>[=<value>] and and +<name>=?, where <name> may be a string of one or  */
/* sixteen characters selected from the following set (See ITU-T Recommendation */
/* V.250 ter page 6):                                                           */
/*   "A" through "Z",                                                           */
/*   "0" through "9",                                                           */
/*   "!", "%", "-", ".", "/", ":" and "_".                                      */
/*                                                                              */
/* <value> shall consist of a numeric constant (See ITU-T Recommendation V.250  */
/* ter page 6).                                                                 */
/* Some additional commands may follow an extended syntax command on the same   */
/* command line if a semicolon is inserted after the preceding extended command */
/* as a separator. The semicolon is not necessary when the extended syntax      */
/* command is the last command on the command line (See ITU-T Recommendation    */
/* V.250 ter page 9). Besides, extended syntax commands may appear on the same  */
/* command line after a basic syntax command without a separator, in the same   */
/* manner as concatenation of basic syntax commands.                            */
typedef struct
{
	T_ATP_EXTENDED_OPERATOR  extended_operator;
	UINT16                   value;
} T_ATP_SINGLE_SUBPARAMETER;

/* Define all extended syntax commands whose subparameter is a numeric          */
/* constant.                                                                    */
/*  __________________________________________________________________________  */
/* |                   |     |         |                                      | */
/* |    Binary code    | Len | Command |              Description             | */
/* |___________________|_____|_________|______________________________________| */
/* |                   |     |         | meaning in the headset profile.      | */
/* |ATP_AT_PLUS_VGM_NB |  4  | AT+VGM  | Command issued by the HS to report   | */
/* |                   |     |         | the current microphone gain level    | */
/* |                   |     |         | setting to the AG (See Headset       | */
/* |                   |     |         | Specification, Section 4.7.3).       | */
/* |ATP_AT_PLUS_VGS_NB |  4  | AT+VGS  | Command issued by the HS to report   | */
/* |                   |     |         | the current speaker gain level       | */
/* |                   |     |         | setting to the AG (See Headset       | */
/* |                   |     |         | Specification, Section 4.7.3).       | */
/* |___________________|_____|_________|______________________________________| */
typedef T_ATP_SINGLE_SUBPARAMETER  T_ATP_AT_PLUS_VGM_PARAM;
typedef T_ATP_SINGLE_SUBPARAMETER  T_ATP_AT_PLUS_VGS_PARAM;

/* Define the maximum number of keys appearing in the <keys>.                   */
#define MAX_NB_OF_KEYS                                (5)

/* Define the maximum length (text format) of the <compound_value> appearing in */
/* keypad control commands.                                                     */
/*    - "=" + """ + MAX_NB_OF_KEYS * [";" + <keys> (up to 65535) + ";"] + """ + */
/*          + "," + <time> (up to 65535)                                        */
/*          + "," + <pause> (up to 65535).                                      */
#define MAX_CKPD_PARAM_LEN                            (0x0F + MAX_NB_OF_KEYS * 0x07)

/* Define the structure associated with the extended syntax command +CKPD.      */
/* Formats of such command are +<name>=<keys>[,<time>[,<pause>]] and +<name>=?, */
/* where <name> may be a string of one or sixteen characters selected from the  */
/* following set (See ITU-T Recommendation V.250 ter page 6):                   */
/*   "A" through "Z",                                                           */
/*   "0" through "9",                                                           */
/*   "!", "%", "-", ".", "/", ":" and "_".                                      */
/*                                                                              */
/* <keys> shall consist of a string constant (See ETS 300 916 (GSM 07.07)       */
/* Version 5.8.1 page 62).                                                      */
/* <time> and <pause> shall consist of numeric constants in tenths of a second  */
/* (See ETS 300 916 (GSM 07.07) Version 5.8.1 page 62).                         */
/* Some additional commands may follow an extended syntax command on the same   */
/* command line if a semicolon is inserted after the preceding extended command */
/* as a separator. The semicolon is not necessary when the extended syntax      */
/* command is the last command on the command line (See ITU-T Recommendation    */
/* V.250 ter page 9). Besides, extended syntax commands may appear on the same  */
/* command line after a basic syntax command without a separator, in the same   */
/* manner as concatenation of basic syntax commands.                            */
typedef struct
{
	T_ATP_EXTENDED_OPERATOR  extended_operator;
	UINT16                   keys[MAX_NB_OF_KEYS];
	UINT8                    nb_keys; 
	UINT16                   time;
	UINT16                   pause;
} T_ATP_PLUS_CKPD;

/* Define all extended syntax commands.                                         */
/*  __________________________________________________________________________  */
/* |                   |     |         |                                      | */
/* |    Binary code    | Len | Command |              Description             | */
/* |___________________|_____|_________|______________________________________| */
/* |                   |     |         |                                      | */
/* |ATP_AT_PLUS_CKPD_NB|  5  | AT+CKPD | Keypad control command (See GSM TS   | */
/* |                   |     |         | 07.07, Section 8.7). For <keys>, the | */
/* |                   |     |         | value of 200 indicates the button on | */
/* |                   |     |         | the headset being pushed. The <time> | */
/* |                   |     |         | and <pause> parameters have no       | */
/* |                   |     |         | meaning in the headset profile.      | */
/* |___________________|_____|_________|______________________________________| */
typedef T_ATP_PLUS_CKPD  T_ATP_AT_PLUS_CKPD_PARAM;

/* Define the default time value.                                               */
#define DEFAULT_TIME                                  (0x0000)

/* Define an unspecified time value.                                            */
#define TIME_DO_NOT_CARE                              (0x0000)

/* Define the default pause value.                                              */
#define DEFAULT_PAUSE                                 (0x0000)

/* Define an unspecified pause value.                                           */
#define PAUSE_DO_NOT_CARE                             (0x0000)


/********************************* RESULT CODES *********************************/
/*                                                                              */
/* Define all supported result codes.                                           */
/*                                                                              */
/*  __________________________________________________________________________  */
/* |                     |     |             |         |                      | */
/* |     Binary code     | Len | Result code | Numeric |     Description      | */
/* |_____________________|_____|_____________|_________|______________________| */
/* |                     |     |             |         |                      | */
/* |      ATP_OK_NB      |  2  |     OK      |    0    | Acknoledges          | */
/* |                     |     |             |         | execution of a       | */
/* |                     |     |             |         | command.             | */
/* |   ATP_CONNECT_NB    |  7  |   CONNECT   |    1    | A connection has     | */
/* |                     |     |             |         | been established.    | */
/* |     ATP_RING_NB     |  4  |    RING     |    2    | Incoming call        | */
/* |                     |     |             |         | detected.            | */
/* |  ATP_NO_CARRIER_NB  |  10 |  NO CARRIER |    3    | The connection has   | */
/* |                     |     |             |         | been terminated or   | */
/* |                     |     |             |         | the attempt to       | */
/* |                     |     |             |         | establish a          | */
/* |                     |     |             |         | connection failed.   | */
/* |     ATP_ERROR_NB    |  5  |    ERROR    |    4    | Problem with         | */
/* |                     |     |             |         | processing the       | */
/* |                     |     |             |         | command line.        | */
/* |  ATP_NO_DIALTONE_NB |  11 | NO DIALTONE |    6    | No dial tone         | */
/* |                     |     |             |         | detected.            | */
/* |     ATP_BUSY_NB     |  4  |    BUSY     |    7    | Busy signal          | */
/* |                     |     |             |         | detected.            | */
/* |   ATP_NO_ANSWER_NB  |  9  |  NO ANSWER  |    8    | '@' dial modifier    | */
/* |                     |     |             |         | was used, but remote | */
/* |                     |     |             |         | ringing followed by  | */
/* |                     |     |             |         | 5 seconds of silence | */
/* |                     |     |             |         | was not detected     | */
/* |                     |     |             |         | before expiration of | */
/* |                     |     |             |         | the connection       | */
/* |                     |     |             |         | timer.               | */
/* |_____________________|_____|_____________|_________|______________________| */
/* |                     |     |             |         |                      | */
/* |  ATP_CONNECT_TXT_NB |  7  |   CONNECT   |    X    | A connection has     | */
/* |                     |     |             |         | been established.    | */
/* |_____________________|_____|_____________|_________|______________________| */
/* |                     |     |             |         |                      | */
/* |   ATP_PLUS_VGM_NB   |  4  |    +VGM     |    X    | Unsolicited result   | */
/* |                     |     |             |         | code issued by the   | */
/* |                     |     |             |         | AG to set the        | */
/* |                     |     |             |         | microphone gain of   | */
/* |                     |     |             |         | the HS (See Headset  | */
/* |                     |     |             |         | Specification,       | */
/* |                     |     |             |         | Section 4.7.3).      | */
/* |   ATP_PLUS_VGS_NB   |  4  |    +VGS     |    X    | Unsolicited result   | */
/* |                     |     |             |         | code issued by the   | */
/* |                     |     |             |         | AG to set the        | */
/* |                     |     |             |         | speaker gain of the  | */
/* |                     |     |             |         | HS (See Headset      | */
/* |                     |     |             |         | Specification,       | */
/* |                     |     |             |         | Section 4.7.3).      | */
/* |_____________________|_____|_____________|_________|______________________| */
/* |                     |     |             |         |                      | */
/* |ATP_PLUS_CME_ERROR_NB|  11 | +CME ERROR: |    X    | Final result code    | */
/* |                     |     |             |         | similar to the       | */
/* |                     |     |             |         | regular ERROR result | */
/* |                     |     |             |         | code (See GSM TS     | */
/* |                     |     |             |         | 07.07, Section 9.2). | */
/* |_____________________|_____|_____________|_________|______________________| */
/* |                     |     |             |         |                      | */
/* |ATP_PLUS_CMS_ERROR_NB|  11 | +CMS ERROR: |    X    | Final result code    | */
/* |                     |     |             |         | that indicates an    | */
/* |                     |     |             |         | error related to     | */
/* |                     |     |             |         | mobile equipment or  | */
/* |                     |     |             |         | network (See GSM TS  | */
/* |                     |     |             |         | 07.05, Section       | */
/* |                     |     |             |         | 3.2.5).              | */
/* |_____________________|_____|_____________|_________|______________________| */
/*                                                                              */
/* Define the length of <CR><LF> headers of information responses (See ETS 300  */
/* 916 (GSM 07.07) Version 4.1 page 13).                                        */
#define ATP_RESULT_CODE_HEADER_LEN                    (0x02)

/* Text codes for result codes (verbose responses disabled).                    */
static const char ATP_RESULT_CODE_TXT_TABLE_V0[] = {'0', \
													'1', \
													'2', \
													'3', \
													'4', \
													'6', \
													'7', \
													'8', \
													'C', 'O', 'N', 'N', 'E', 'C', 'T', \
													'+', 'V', 'G', 'M', \
													'+', 'V', 'G', 'S', \
													'+', 'C', 'M', 'E', ' ', 'E', 'R', 'R', 'O', 'R', ':', \
													'+', 'C', 'M', 'S', ' ', 'E', 'R', 'R', 'O', 'R', ':', \
													'\xFF'};

/* Text codes for result codes (verbose responses enabled).                     */
static const char ATP_RESULT_CODE_TXT_TABLE_V1[] = {'O', 'K', \
													'C', 'O', 'N', 'N', 'E', 'C', 'T', \
													'R', 'I', 'N', 'G', \
													'N', 'O', ' ', 'C', 'A', 'R', 'R', 'I', 'E', 'R', \
													'E', 'R', 'R', 'O', 'R', \
													'N', 'O', ' ', 'D', 'I', 'A', 'L', 'T', 'O', 'N', 'E', \
													'B', 'U', 'S', 'Y', \
													'N', 'O', ' ', 'A', 'N', 'S', 'W', 'E', 'R', \
													'C', 'O', 'N', 'N', 'E', 'C', 'T', \
													'+', 'V', 'G', 'M', \
													'+', 'V', 'G', 'S', \
													'+', 'C', 'M', 'E', ' ', 'E', 'R', 'R', 'O', 'R', ':', \
													'+', 'C', 'M', 'S', ' ', 'E', 'R', 'R', 'O', 'R', ':', \
													'\xFF'};

/* Binary related codes.                                                        */
typedef enum
{
	ATP_OK_NB          = (0x00000000),
	ATP_CONNECT_NB,
	ATP_RING_NB,
	ATP_NO_CARRIER_NB,
	ATP_ERROR_NB,
	ATP_NO_DIALTONE_NB = (0x00000006),
	ATP_BUSY_NB,
	ATP_NO_ANSWER_NB,
	ATP_CONNECT_TXT_NB,
	ATP_PLUS_VGM_NB,
	ATP_PLUS_VGS_NB,
	ATP_PLUS_CME_ERROR_NB,
	ATP_PLUS_CMS_ERROR_NB,
	ATP_MAX_NB_OF_RESULT_CODES
} T_ATP_BINARY_RESULT_CODES;

/* Related offsets (verbose responses disabled).                                */
#define ATP_OK_OFFSET_V0                              (0x00)
#define ATP_CONNECT_OFFSET_V0                         (ATP_OK_OFFSET_V0 + 0x01)
#define ATP_RING_OFFSET_V0                            (ATP_CONNECT_OFFSET_V0 + 0x01)
#define ATP_NO_CARRIER_OFFSET_V0                      (ATP_RING_OFFSET_V0 + 0x01)
#define ATP_ERROR_OFFSET_V0                           (ATP_NO_CARRIER_OFFSET_V0 + 0x01)
#define ATP_NO_DIALTONE_OFFSET_V0                     (ATP_ERROR_OFFSET_V0 + 0x01)
#define ATP_BUSY_OFFSET_V0                            (ATP_NO_DIALTONE_OFFSET_V0 + 0x01)
#define ATP_NO_ANSWER_OFFSET_V0                       (ATP_BUSY_OFFSET_V0 + 0x01)
#define ATP_CONNECT_TXT_OFFSET_V0                     (ATP_NO_ANSWER_OFFSET_V0 + 0x01)
#define ATP_PLUS_VGM_OFFSET_V0                        (ATP_CONNECT_TXT_OFFSET_V0 + 0x07)
#define ATP_PLUS_VGS_OFFSET_V0                        (ATP_PLUS_VGM_OFFSET_V0 + 0x04)
#define ATP_PLUS_CME_ERROR_OFFSET_V0                  (ATP_PLUS_VGS_OFFSET_V0 + 0x04)
#define ATP_PLUS_CMS_ERROR_OFFSET_V0                  (ATP_PLUS_CME_ERROR_OFFSET_V0 + 0x0B)
#define ATP_RESULT_CODE_LAST_OFFSET_V0                (ATP_PLUS_CMS_ERROR_OFFSET_V0 + 0x0B)

/* Related offsets (verbose responses enabled).                                 */
#define ATP_OK_OFFSET_V1                              (0x00)
#define ATP_CONNECT_OFFSET_V1                         (ATP_OK_OFFSET_V1 + 0x02)
#define ATP_RING_OFFSET_V1                            (ATP_CONNECT_OFFSET_V1 + 0x07)
#define ATP_NO_CARRIER_OFFSET_V1                      (ATP_RING_OFFSET_V1 + 0x04)
#define ATP_ERROR_OFFSET_V1                           (ATP_NO_CARRIER_OFFSET_V1 + 0x0A)
#define ATP_NO_DIALTONE_OFFSET_V1                     (ATP_ERROR_OFFSET_V1 + 0x05)
#define ATP_BUSY_OFFSET_V1                            (ATP_NO_DIALTONE_OFFSET_V1 + 0x0B)
#define ATP_NO_ANSWER_OFFSET_V1                       (ATP_BUSY_OFFSET_V1 + 0x04)
#define ATP_CONNECT_TXT_OFFSET_V1                     (ATP_NO_ANSWER_OFFSET_V1 + 0x09)
#define ATP_PLUS_VGM_OFFSET_V1                        (ATP_CONNECT_TXT_OFFSET_V1 + 0x07)
#define ATP_PLUS_VGS_OFFSET_V1                        (ATP_PLUS_VGM_OFFSET_V1 + 0x04)
#define ATP_PLUS_CME_ERROR_OFFSET_V1                  (ATP_PLUS_VGS_OFFSET_V1 + 0x04)
#define ATP_PLUS_CMS_ERROR_OFFSET_V1                  (ATP_PLUS_CME_ERROR_OFFSET_V1 + 0x0B)
#define ATP_RESULT_CODE_LAST_OFFSET_V1                (ATP_PLUS_CMS_ERROR_OFFSET_V1 + 0x0B)

/* Related structures.                                                          */
typedef enum
{
	ATP_RESULT_CODE_NOT_DEFINED = (0x00000000),
	ATP_BASIC_RESULT_CODE,
	ATP_EXTENDED_RESULT_CODE,
	ATP_CONNECT_TXT_RESULT_CODE,
	ATP_PLUS_ERROR_RESULT_CODE
} T_ATP_RESULT_CODE_FORMAT;

#define ATP_OK_PARAM                                  (ATP_BASIC_RESULT_CODE)
#define ATP_CONNECT_PARAM                             (ATP_BASIC_RESULT_CODE)
#define ATP_RING_PARAM                                (ATP_BASIC_RESULT_CODE)
#define ATP_NO_CARRIER_PARAM                          (ATP_BASIC_RESULT_CODE)
#define ATP_ERROR_PARAM                               (ATP_BASIC_RESULT_CODE)
#define ATP_NO_DIALTONE_PARAM                         (ATP_BASIC_RESULT_CODE)
#define ATP_BUSY_PARAM                                (ATP_BASIC_RESULT_CODE)
#define ATP_NO_ANSWER_PARAM                           (ATP_BASIC_RESULT_CODE)
#define ATP_CONNECT_TXT_PARAM                         (ATP_CONNECT_TXT_RESULT_CODE)
#define ATP_PLUS_VGM_PARAM                            (ATP_EXTENDED_RESULT_CODE)
#define ATP_PLUS_VGS_PARAM                            (ATP_EXTENDED_RESULT_CODE)
#define ATP_PLUS_CME_ERROR_PARAM                      (ATP_PLUS_ERROR_RESULT_CODE)
#define ATP_PLUS_CMS_ERROR_PARAM                      (ATP_PLUS_ERROR_RESULT_CODE)

#define ATP_RESULT_OFFSET_V0_COLUMN                   (0x00)
#define ATP_RESULT_OFFSET_V1_COLUMN                   (0x01)
#define ATP_RESULT_PARAM_COLUMN                       (0x02)

static const UINT8 ATP_RESULT_CODE_INFO[ATP_MAX_NB_OF_RESULT_CODES + 0x01][0x03] \
					 = {{ATP_OK_OFFSET_V0,				 ATP_OK_OFFSET_V1,				 ATP_OK_PARAM}, \
						{ATP_CONNECT_OFFSET_V0,			 ATP_CONNECT_OFFSET_V1,			 ATP_CONNECT_PARAM}, \
						{ATP_RING_OFFSET_V0,			 ATP_RING_OFFSET_V1,			 ATP_RING_PARAM}, \
						{ATP_NO_CARRIER_OFFSET_V0,		 ATP_NO_CARRIER_OFFSET_V1,		 ATP_NO_CARRIER_PARAM}, \
						{ATP_ERROR_OFFSET_V0,			 ATP_ERROR_OFFSET_V1,			 ATP_ERROR_PARAM}, \
						{ATP_NO_DIALTONE_OFFSET_V0,		 ATP_NO_DIALTONE_OFFSET_V1,		 ATP_RESULT_CODE_NOT_DEFINED}, \
						{ATP_NO_DIALTONE_OFFSET_V0,		 ATP_NO_DIALTONE_OFFSET_V1,		 ATP_NO_DIALTONE_PARAM}, \
						{ATP_BUSY_OFFSET_V0,			 ATP_BUSY_OFFSET_V1,			 ATP_BUSY_PARAM}, \
						{ATP_NO_ANSWER_OFFSET_V0,		 ATP_NO_ANSWER_OFFSET_V1,		 ATP_NO_ANSWER_PARAM}, \
						{ATP_CONNECT_TXT_OFFSET_V0,		 ATP_CONNECT_TXT_OFFSET_V1,		 ATP_CONNECT_TXT_PARAM}, \
						{ATP_PLUS_VGM_OFFSET_V0,		 ATP_PLUS_VGM_OFFSET_V1,		 ATP_PLUS_VGM_PARAM}, \
						{ATP_PLUS_VGS_OFFSET_V0,		 ATP_PLUS_VGS_OFFSET_V1,		 ATP_PLUS_VGS_PARAM}, \
						{ATP_PLUS_CME_ERROR_OFFSET_V0,	 ATP_PLUS_CME_ERROR_OFFSET_V1,	 ATP_PLUS_CME_ERROR_PARAM}, \
						{ATP_PLUS_CMS_ERROR_OFFSET_V0,	 ATP_PLUS_CMS_ERROR_OFFSET_V1,	 ATP_PLUS_CMS_ERROR_PARAM}, \
						{ATP_RESULT_CODE_LAST_OFFSET_V0, ATP_RESULT_CODE_LAST_OFFSET_V1, ATP_RESULT_CODE_NOT_DEFINED}};

/* Define the maximum extended result code parameter length:                    */
/*    - '=' + <value> (up to 65535).                                            */
#define MAX_SINGLE_RESULT_CODE_VALUE_LEN              (0x06)

/* Define the structure associated with extended result codes. The format of    */
/* such result codes is <result_code>[=<value>] (See Headset Specification,     */
/* Section 4.7.3). <value> shall consist of a numeric constant.                 */
typedef struct
{
	UINT16  value;
} T_ATP_SINGLE_RESULT_CODE_VALUE;

/* Define all extended syntax result codes.                                     */
/*  __________________________________________________________________________  */
/* |                  |     |             |         |                         | */
/* |    Binary code   | Len | Result code | Numeric |       Description       | */
/* |__________________|_____|_____________|_________|_________________________| */
/* |                  |     |             |         |                         | */
/* |  ATP_PLUS_VGM_NB |  4  |    +VGM     |    X    | Unsolicited result code | */
/* |                  |     |             |         | issued by the AG to set | */
/* |                  |     |             |         | the microphone gain of  | */
/* |                  |     |             |         | the HS (See Headset     | */
/* |                  |     |             |         | Specification, Section  | */
/* |                  |     |             |         | 4.7.3).                 | */
/* |  ATP_PLUS_VGS_NB |  4  |    +VGS     |    X    | Unsolicited result code | */
/* |                  |     |             |         | issued by the AG to set | */
/* |                  |     |             |         | the speaker gain of the | */
/* |                  |     |             |         | HS (See Headset         | */
/* |                  |     |             |         | Specification, Section  | */
/* |                  |     |             |         | 4.7.3).                 | */
/* |__________________|_____|_____________|_________|_________________________| */
typedef T_ATP_SINGLE_RESULT_CODE_VALUE  T_ATP_PLUS_VGM_PARAM;
typedef T_ATP_SINGLE_RESULT_CODE_VALUE  T_ATP_PLUS_VGS_PARAM;

/* Define the maximum number of characters appearing in the <text>.             */
/*    - '=' + <value> (up to 65535).                                            */
#define MAX_CONNECT_TXT_LEN                           (MAX_SINGLE_RESULT_CODE_VALUE_LEN)

/* Define the structure associated with CONNECT<text> result code whose format  */
/* is CONNECT <text> (See ITU-T Recommendation V.250 ter page 11). <text>       */
/* should specify the baudrate (1200, 2400, 4800, 9600 ...).                    */
/*  __________________________________________________________________________  */
/* |                  |     |             |         |                         | */
/* |    Binary code   | Len | Result code | Numeric |       Description       | */
/* |__________________|_____|_____________|_________|_________________________| */
/* |                  |     |             |         |                         | */
/* |ATP_CONNECT_TXT_NB|  7  |   CONNECT   |    X    | A connection has been   | */
/* |                  |     |             |         | established.            | */
/* |__________________|_____|_____________|_________|_________________________| */
typedef T_ATP_SINGLE_RESULT_CODE_VALUE  T_ATP_CONNECT_TXT_PARAM;

/* Define the maximum number of characters appearing in the <error>.            */
#define MAX_PLUS_ERROR_LEN                       (30)

/* Define the structure associated with <error> result code whose format is     */
/* either +CME ERROR: <error> (See See GSM TS 07.07, Section 9.2) or +CMS       */
/* ERROR: <error> (See GSM TS 07.05, Section 3.2.5)).                           */
/*  __________________________________________________________________________  */
/* |                     |     |             |         |                      | */
/* |     Binary code     | Len | Result code | Numeric |      Description     | */
/* |_____________________|_____|_____________|_________|______________________| */
/* |                     |     |             |         |                      | */
/* |ATP_PLUS_CME_ERROR_NB|  11 | +CME ERROR: |    X    | Final result code    | */
/* |                     |     |             |         | similar to the       | */
/* |                     |     |             |         | regular ERROR result | */
/* |                     |     |             |         | code (See GSM TS     | */
/* |                     |     |             |         | 07.07, Section 9.2). | */
/* |_____________________|_____|_____________|_________|______________________| */
/* |                     |     |             |         |                      | */
/* |ATP_PLUS_CMS_ERROR_NB|  11 | +CMS ERROR: |    X    | Final result code    | */
/* |                     |     |             |         | that indicates an    | */
/* |                     |     |             |         | error related to     | */
/* |                     |     |             |         | mobile equipment or  | */
/* |                     |     |             |         | network (See GSM TS  | */
/* |                     |     |             |         | 07.05, Section       | */
/* |                     |     |             |         | 3.2.5).              | */
/* |_____________________|_____|_____________|_________|______________________| */
typedef struct
{
	char   error_p[MAX_PLUS_ERROR_LEN];
	UINT8  error_length;
} T_ATP_PLUS_ERROR_RESULT_CODE;


/************************************ MACROS ************************************/
/*                                                                              */
/* Define a macro used to compare the first "count" characters of the two       */
/* buffers "reference" and "buffer". The comparison is not case sensitive. Note */
/* that the "reference" must be in all caps. Therefore, the gap between         */
/* alphabetic lower-case characters and their upper-case equivalents is 0x20    */
/* (See CCITT T.50 (1992), International Reference Alphabet).                   */
/*                                                                              */
/* Prototype:                                                                   */
/*   ATP_MEM_I_CMP (T_ATP_TXT_CMD  reference,                                   */
/*                  T_ATP_TXT_CMD  buffer,                                      */
/*                  UINT8          count,                                       */
/*                  BOOLEAN        *equal);                                     */
#define ATP_MEM_I_CMP(reference, \
					  buffer, \
					  count, \
					  equal) \
		{ \
			UINT8  nb_byte = 0x00; \
			while ((nb_byte                < (count)) && \
				   (((buffer)[nb_byte]     == (reference)[nb_byte]) || \
					(((buffer)[nb_byte]    >= 'a') && \
					 ((buffer)[nb_byte]    <= 'z') && \
					 ((reference)[nb_byte] == ((buffer)[nb_byte] - '\x20'))))) \
			{ \
				nb_byte++; \
			} \
			*(equal) = (BOOLEAN) ((nb_byte == (count)) ? (TRUE) : (FALSE)); \
		}

/* Define a macro used to compare the first "count" characters of the two       */
/* buffers "reference" and "buffer". The comparison is not case sensitive.      */
/* Besides, space characters are ignored and may be used freely for formatting  */
/* purposes (See ITU-T Recommendation V.250 ter page 4). Note that the          */
/* "reference" must be in all caps. Therefore, the gap between alphabetic       */
/* lower-case characters and their upper-case equivalents is 0x20 (See CCITT    */
/* T.50 (1992), International Reference Alphabet).                              */
/*                                                                              */
/* Prototype:                                                                   */
/*   ATP_MEM_SP_I_CMP (T_ATP_TXT_CMD  reference,                                */
/*                     T_ATP_TXT_CMD  buffer,                                   */
/*                     UINT8          *count,                                   */
/*                     BOOLEAN        *equal);                                  */
#define ATP_MEM_SP_I_CMP(reference, \
						 buffer, \
						 count, \
						 equal) \
		{ \
			UINT8  nb_byte_ref = 0x00; \
			UINT8  nb_byte_buf = 0x00; \
			while ((nb_byte_ref                < *(count)) && \
				   (((buffer)[nb_byte_buf]     == '\x20') || \
					((buffer)[nb_byte_buf]     == (reference)[nb_byte_ref]) || \
					(((buffer)[nb_byte_buf]    >= 'a') && \
					 ((buffer)[nb_byte_buf]    <= 'z') && \
					 ((reference)[nb_byte_ref] == ((buffer)[nb_byte_buf] - '\x20'))))) \
			{ \
				if ((buffer)[nb_byte_buf++] == '\x20') \
				{ \
					continue; \
				} \
				nb_byte_ref++; \
			} \
			*(equal) = (BOOLEAN) ((nb_byte_ref == *(count)) ? (TRUE) : (FALSE)); \
			*(count) = nb_byte_buf; \
		}


/************************ MACROS DEDICATED TO AT COMMANDS ***********************/
/*                                                                              */
/* Define a macro used to get the <number> of basic syntax commands. Note that  */
/* <number> may be a string of one or more characters from "0" through "9"      */
/* representing the decimal integer value (See ITU-T Recommendation V.250 ter   */
/* page 5). Besides, if <number> is missing, the "initial_value" is assumed.    */
/*                                                                              */
/* Prototype:                                                                   */
/*   ATP_GET_NUMBER (T_ATP_TXT_CMD  cmd_line_p,                                 */
/*                   UINT16         *number_p,                                  */
/*                   const char     initial_value);                             */
#define ATP_GET_NUMBER(cmd_line_p, \
					   number_p, \
					   initial_value) \
		{ \
			char   nb_value_p[0x05] = {'\x00','\x00','\x00','\x00','\x00'}; \
			UINT8  nb_digit         = 0x00; \
			for (*nb_value_p = initial_value; \
				 ((*(cmd_line_p) >= '0') && (*(cmd_line_p) <= '9')) || \
				 (*(cmd_line_p) == ' '); \
				 (cmd_line_p)++) \
			{ \
				if (((*(cmd_line_p) == '0') && (nb_digit == 0x00)) || \
					(*(cmd_line_p) == ' '))\
				{ \
					continue; \
				} \
				nb_value_p[nb_digit++] = *(cmd_line_p); \
			} \
			*(number_p) = (UINT16) atoi (nb_value_p); \
		}

/* Define a macro used to get the <dial_string> of dial (See ITU-T              */
/* Recommendation V.250 ter page 31). All characters appearing on the same      */
/* command line after D are considered part of the call addressing information  */
/* to be signalled to the network, or modifiers used to control the signalling  */
/* process, up to a semicolon character or the end of the command line. If the  */
/* <dial_string> is terminated by a semicolon, the DCE does not start the call  */
/* origination procedure, but instead returns to command state after completion */
/* of the signalling of call addressing information to the network.             */
/*                                                                              */
/* Prototype:                                                                   */
/*   ATP_GET_DIAL_STRING (T_ATP_TXT_CMD  cmd_line_p,                            */
/*                        T_ATP_TXT_CMD  dial_string_p,                         */
/*                        UINT8          *dial_string_length_p,                 */
/*                        UINT8          *call_type_p,                          */
/*                        const char     termination_char);                     */
#define ATP_GET_DIAL_STRING(cmd_line_p, \
							dial_string_p, \
							dial_string_length_p, \
							call_type_p, \
							termination_char) \
		{ \
			*(call_type_p) = DATA_CALL; \
			for (*(dial_string_length_p) = 0x00; \
				 (*(cmd_line_p) != termination_char) && \
				 (*(dial_string_length_p) < MAX_DIAL_STRING_LEN); \
				 (*(dial_string_length_p))++) \
			{ \
				if (*(cmd_line_p) == ';') \
				{ \
					*(call_type_p) = VOICE_CALL; \
					break; \
				} \
				(dial_string_p)[*(dial_string_length_p)] = *(cmd_line_p)++; \
			} \
		}

/* Define a macro used to get operators such as "=", "?" or "=?".               */
/*                                                                              */
/* Prototype:                                                                   */
/*   ATP_GET_OPERATOR (T_ATP_TXT_CMD            cmd_line_p,                     */
/*                     T_ATP_EXTENDED_OPERATOR  *s_operator_p);                 */
#define ATP_GET_OPERATOR(cmd_line_p, \
						 s_operator_p) \
		{ \
			for (*(s_operator_p) = 0x00; \
				 ((*(cmd_line_p) == '=') || (*(cmd_line_p) == '?') || \
				 (*(cmd_line_p) == ' ')); \
				 (cmd_line_p)++) \
			{ \
				switch (*(cmd_line_p)) \
				{ \
					case '?': \
						{ \
							*(s_operator_p) += 0x01; \
							break; \
						} \
					case '=': \
						{ \
							*(s_operator_p) += 0x02; \
							break; \
						} \
					default: \
						{ \
							break; \
						} \
				} \
			} \
		}

/* Define a macro used to get the <value> of S-parameters. Note that <value>    */
/* shall consist of a decimal constant (See ITU-T Recommendation V.250 ter page */
/* 6).                                                                          */
/*                                                                              */
/* Prototype:                                                                   */
/*   ATP_GET_PARAMETER_VALUE (T_ATP_TXT_CMD            cmd_line_p,              */
/*                            T_ATP_EXTENDED_OPERATOR  *s_operator_p,           */
/*                            UINT16                   *value_p);               */
#define ATP_GET_PARAMETER_VALUE(cmd_line_p, \
								s_operator_p, \
								value_p) \
		{ \
			ATP_GET_OPERATOR((cmd_line_p), \
							 (s_operator_p)); \
			ATP_GET_NUMBER((cmd_line_p), \
						   (value_p), \
						   '0'); \
		}

/* Define a macro used to proceed with subsequent commands that might follow an */
/* extended syntax command (See ITU-T Recommendation V.250 ter page 9).         */
/*                                                                              */
/* Prototype:                                                                   */
/*   ATP_GET_ADDITIONAL_CMD (T_ATP_TXT_CMD  cmd_line_p,                         */
/*                           const char     termination_char);                  */
#define ATP_GET_ADDITIONAL_CMD(cmd_line_p, \
							   termination_char) \
		{ \
			while (*(cmd_line_p) != termination_char) \
			{ \
				if (*(cmd_line_p)++ == ';') \
				{ \
					break; \
				} \
			} \
		}			

/* Define a macro used to get the <value> of extended syntax commands. Note     */
/* that <value> shall consist of either a numeric constant or a string constant */
/* (See ITU-T Recommendation V.250 ter page 6). However, only numeric constants */
/* are supported for now.                                                       */
/*                                                                              */
/* Prototype:                                                                   */
/*   ATP_GET_VALUE (T_ATP_TXT_CMD            cmd_line_p,                        */
/*                  T_ATP_EXTENDED_OPERATOR  *extended_operator_p,              */
/*                  UINT16                   *value_p,                          */
/*                  const char               termination_char);                 */
#define ATP_GET_VALUE(cmd_line_p, \
					  extended_operator_p, \
					  value_p, \
					  termination_char) \
		{ \
			ATP_GET_OPERATOR((cmd_line_p), \
							 (extended_operator_p)); \
			ATP_GET_NUMBER((cmd_line_p), \
						   (value_p), \
						   '0'); \
			ATP_GET_ADDITIONAL_CMD((cmd_line_p), \
								   (termination_char)); \
		}

/* Define a macro used to get the <keys> of keypad control command. Note that   */
/* <keys> shall consist of a string constant (See ETS 300 916 (GSM 07.07)       */
/* Version 5.8.1 page 62). Note also that <keys> is a string of characters      */
/* representing keys (See See ETS 300 916 (GSM 07.07) Version 5.8.1 page 62).   */
/* Colon character followed by one character can be used to indicate a          */
/* manufacturer specific key not listed here. All characters from a semicolon   */
/* character to the next single semicolon character are treated as alpha        */
/* entries and are not converted to key equivalents. All semicolon characters   */
/* inside alpha entries should be duplicated in the DTE. Pause characters "W"   */
/* and "w" can be used to pause between key pressings for a time specified by   */
/* <pause>.                                                                     */
/*                                                                              */
/* Prototype:                                                                   */
/*   ATP_GET_KEYS (T_ATP_TXT_CMD             cmd_line_p,                        */
/*                 T_ATP_AT_PLUS_CKPD_PARAM  *ckpd_param_p,                     */
/*                 const char                termination_char);                 */
#define ATP_GET_KEYS(cmd_line_p, \
					 ckpd_param_p, \
					 termination_char) \
		{ \
			ATP_GET_NUMBER((cmd_line_p), \
						   &((ckpd_param_p)->keys[0x00]), \
						   '0'); \
			(ckpd_param_p)->nb_keys = 0x01; \
			ATP_GET_ADDITIONAL_CMD((cmd_line_p), \
								   (termination_char)); \
		}
//		{ \
//			UINT8  nb_keys = 0x00; \
//			while (*(cmd_line_p) != termination_char) \
//			{ \
//				if (*(cmd_line_p)++ == '\"') \
//				{ \
//					break; \
//				} \
//			} \
//			while (*(cmd_line_p) != termination_char) \
//			{ \
//				switch (*(cmd_line_p)++) \
//				{ \
//					case ' ': \
//						{ \
//							continue; \
//						} \
//					case ';': \
//						{ \
//							ATP_GET_NUMBER((cmd_line_p), \
//										   &((ckpd_param_p)->keys[nb_keys]), \
//										   '0'); \
//							nb_keys++; \
//							while (*(cmd_line_p) != termination_char) \
//							{ \
//								if (*(cmd_line_p)++ == ';') \
//								{ \
//									break; \
//								} \
//							} \
//							continue; \
//						} \
//					case ':': \
//						{ \
//							while (*(cmd_line_p) != termination_char) \
//							{ \
//								if (*(cmd_line_p)++ == ':') \
//								{ \
//									break; \
//								} \
//							} \
//							continue; \
//						} \
//					case '\"': \
//						{ \
//							break; \
//						} \
//					default: \
//						{ \
//							(ckpd_param_p)->keys[nb_keys] = (UINT16) (*(cmd_line_p - 0x01)); \
//							nb_keys++; \
//							continue; \
//						} \
//				} \
//				break; \
//			} \
//			(ckpd_param_p)->nb_keys = nb_keys; \
//		}

/* Define a macro used to proceed with subsequent numeric and string values     */
/* that might appear in a compound value (See ITU-T Recommendation V.250 ter    */
/* page 7).                                                                     */
/*                                                                              */
/* Prototype:                                                                   */
/*   ATP_GET_ADDITIONAL_VALUE (T_ATP_TXT_CMD  cmd_line_p,                       */
/*                             const char     termination_char);                */
#define ATP_GET_ADDITIONAL_VALUE(cmd_line_p, \
								 termination_char) \
		{ \
			while (*(cmd_line_p) != termination_char) \
			{ \
				switch (*(cmd_line_p)) \
				{ \
					case ',': \
						{ \
							cmd_line_p++; \
						} \
					case ';': \
						{ \
							break; \
						} \
					default: \
						{ \
							cmd_line_p++; \
							continue; \
						} \
				} \
				break; \
			} \
		}			

/* Define a macro used to get the <keys>,<time> and <pause> of keypad control   */
/* command. Note that <keys> shall consist of a string constant and <time> and  */
/* <pause> shall consist of numeric constants in tenths of a second (See ETS    */
/* 300 916 (GSM 07.07) Version 5.8.1 page 62).                                  */
/*                                                                              */
/* Prototype:                                                                   */
/*   ATP_GET_CKPD_PARAM (T_ATP_TXT_CMD             cmd_line_p,                  */
/*                       T_ATP_AT_PLUS_CKPD_PARAM  *ckpd_param_p,               */
/*                       const char                termination_char);           */
#define ATP_GET_CKPD_PARAM(cmd_line_p, \
						   ckpd_param_p, \
						   termination_char) \
		{ \
			ATP_GET_OPERATOR((cmd_line_p), \
							 &((ckpd_param_p)->extended_operator)); \
			ATP_GET_KEYS((cmd_line_p), \
						 (ckpd_param_p), \
						 (termination_char)); \
			ATP_GET_ADDITIONAL_VALUE((cmd_line_p), \
									 (termination_char)); \
			ATP_GET_NUMBER((cmd_line_p), \
						   &((ckpd_param_p)->time), \
						   '0'); \
			ATP_GET_ADDITIONAL_VALUE((cmd_line_p), \
									 (termination_char)); \
			ATP_GET_NUMBER((cmd_line_p), \
						   &((ckpd_param_p)->pause), \
						   '0'); \
			ATP_GET_ADDITIONAL_CMD((cmd_line_p), \
								   (termination_char)); \
		}


/************************ MACRO DEDICATED TO RESULT CODES ***********************/
/*                                                                              */
/* Define a macro used to get the <value> associated with extended result codes */
/* (See Headset Specification, Section 4.7.3). Note that <value> shall consist  */
/* of a numeric constant.                                                       */
/*                                                                              */
/* Prototype:                                                                   */
/*   ATP_GET_RESULT_CODE_VALUE (T_ATP_TXT_CMD  cmd_line_p,                      */
/*                              UINT16         *value_p);                       */
#define ATP_GET_RESULT_CODE_VALUE(cmd_line_p, \
								  value_p) \
		{ \
			UINT8  result_operator = 0x00; \
			ATP_GET_OPERATOR((cmd_line_p), \
							 &result_operator); \
			ATP_GET_NUMBER((cmd_line_p), \
						   (value_p), \
						   '0'); \
		}

/* Define a macro used to get the <text> associated with CONNECT <text> result  */
/* code (See ITU-T Recommendation V.250 ter page 11).                           */
/*                                                                              */
/* Prototype:                                                                   */
/*   ATP_GET_CONNECT_TXT (T_ATP_TXT_CMD  cmd_line_p,                            */
/*                        UINT16         *value_p);                             */
#define ATP_GET_CONNECT_TXT(cmd_line_p, \
							value_p) \
		{ \
			ATP_GET_NUMBER((cmd_line_p), \
						   (value_p), \
						   '0'); \
		}

/* Define a macro used to get the <error> of +CME ERROR (See See GSM TS 07.07,  */
/* Section 9.2) and +CMS ERROR (See GSM TS 07.05, Section 3.2.5)) result codes. */
/*                                                                              */
/* Prototype:                                                                   */
/*   ATP_PLUS_ERROR_STRING (T_ATP_TXT_CMD  cmd_line_p,                          */
/*                          T_ATP_TXT_CMD  error_p,                             */
/*                          UINT8          *error_length_p,                     */
/*                          const char     termination_char);                   */
#define ATP_PLUS_ERROR_STRING(cmd_line_p, \
							  error_p, \
							  error_length_p, \
							  termination_char) \
		{ \
			for (*(error_length_p) = 0x00; \
				 (*(cmd_line_p) != termination_char) && \
				 (*(error_length_p) < MAX_PLUS_ERROR_LEN); \
				 (*(error_length_p))++) \
			{ \
				(error_p)[*(error_length_p)] = *(cmd_line_p)++; \
			} \
		}


/************************** MACRO DEDICATED TO RAW DATA *************************/
/*                                                                              */
/* Define a macro used to get the length of unknown commands from raw data,     */
/* <CR> not included. Note that all characters appearing on the same command    */
/* line are considered part of the unknown command, up to the end of the        */
/* command line.                                                                */
/*                                                                              */
/* Prototype:                                                                   */
/*   ATP_GET_UNKNOWN_CMD_LEN (T_ATP_TXT_CMD  cmd_line_p,                        */
/*                            UINT8          *cmd_length_p);                    */
/*                            const char     termination_char);                 */
#define ATP_GET_UNKNOWN_CMD_LEN(cmd_line_p, \
								cmd_length_p, \
								termination_char) \
		{ \
			for (*(cmd_length_p) = 0x00; \
				 (cmd_line_p)[*(cmd_length_p)] != termination_char; \
				 (*(cmd_length_p))++) \
			{ \
			} \
		}

/* Define a macro used to get the length of unknown AT commands from raw data,  */
/* <CR> or semicolon not included. Note that all characters appearing on the    */
/* same command line are considered part of the unknown command, up to a        */
/* semicolon character or the end of the command line.                          */
/*                                                                              */
/* Prototype:                                                                   */
/*   ATP_GET_UNKNOWN_AT_CMD_LEN (T_ATP_TXT_CMD  cmd_line_p,                     */
/*                               UINT8          *cmd_length_p);                 */
/*                               const char     termination_char);              */
#define ATP_GET_UNKNOWN_AT_CMD_LEN(cmd_line_p, \
								   cmd_length_p, \
								   termination_char) \
		{ \
			for (*(cmd_length_p) = 0x00; \
				 ((cmd_line_p)[*(cmd_length_p)] != termination_char) && \
				 ((cmd_line_p)[*(cmd_length_p)] != ';'); \
				 (*(cmd_length_p))++) \
			{ \
			} \
		}

#endif