FreeCalypso > hg > fc-small-hw
view lcdtest1/schem+bom/schem.v @ 77:4c5675c79555
lunalcd3.pcb: add orientation marker to SW1
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 18 Nov 2021 07:40:13 +0000 |
parents | 0f9bdd60ce50 |
children |
line wrap: on
line source
module board (); wire GND, P_5V, P_3V3; wire [7:0] DB; wire RD, WR, RS, CS, RESET; wire [1:3] LEDK; conn_36pin_plus2 fpc ( .pin_1(DB[7]), .pin_2(DB[6]), .pin_3(DB[5]), .pin_4(DB[4]), .pin_5(DB[3]), .pin_6(DB[2]), .pin_7(DB[1]), .pin_8(DB[0]), .pin_9(GND), .pin_10(GND), /* unused lower data bus */ .pin_11(GND), /* unused lower data bus */ .pin_12(GND), /* unused lower data bus */ .pin_13(GND), /* unused lower data bus */ .pin_14(GND), /* unused lower data bus */ .pin_15(GND), /* unused lower data bus */ .pin_16(GND), /* unused lower data bus */ .pin_17(GND), /* unused lower data bus */ .pin_18(P_3V3), /* IOVCC */ .pin_19(P_3V3), /* VCI */ .pin_20(RD), .pin_21(WR), .pin_22(RS), .pin_23(CS), .pin_24(RESET), .pin_25(P_3V3), /* IM0 tied high */ .pin_26(GND), .pin_27(P_5V), /* LEDA */ .pin_28(LEDK[1]), .pin_29(LEDK[2]), .pin_30(LEDK[3]), /* the remaining pins are NC */ .pin_31(), .pin_32(), .pin_33(), .pin_34(), .pin_35(), .pin_36(), /* ground the two mounting pads */ .pin_37(GND), .pin_38(GND) ); resistor R1 (LEDK[1], GND); resistor R2 (LEDK[2], GND); resistor R3 (LEDK[3], GND); header_13pin data (.pin_1(DB[7]), .pin_2(DB[6]), .pin_3(DB[5]), .pin_4(DB[4]), .pin_5(DB[3]), .pin_6(DB[2]), .pin_7(DB[1]), .pin_8(DB[0]), .pin_9(RD), .pin_10(WR), .pin_11(RS), .pin_12(CS), .pin_13(RESET) ); header_2pin pwr_5V (.pin_1(P_5V), .pin_2(GND) ); header_2pin pwr_3V3 (.pin_1(P_3V3), .pin_2(GND) ); endmodule